[GIT PATCH 2.6.30-rc5] x86,percpu: fix pageattr handling with remap allocator, take#2

[GIT PATCH 2.6.30-rc5] x86,percpu: fix pageattr handling with remap allocator, take#2

[Tejun Heo]

Hello,

Upon ack, please pull from the following git tree.

  git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git x86-percpu-pageattr

This is the second take of x86-percpu-fix-pageattr patchset.  Changes
from the last take[L] are...

* 0002 and renamed as per Jan's comment.

* 0003 updated accordingly.

* 0004 updated so that selection logic is left in individual setup
  functions.  This way is easier to add more complex selection logic.

* 0005 added.  This patch makes sure remap allocator doesn't consume
  too much of vmalloc space.  The cutoff is currently 20%.

This patchset contains the following five patches.

  0001-x86-prepare-setup_pcpu_remap-for-pageattr-fix.patch
  0002-x86-reorganize-cpa_process_alias.patch
  0003-x86-fix-pageattr-handling-for-remap-percpu-allocato.patch
  0004-x86-implement-percpu_alloc-kernel-parameter.patch
  0005-x86-ensure-percpu-remap-doesn-t-consume-too-much-vm.patch

and is on top of the current linux-2.6#master (45d44740).

Ingo, 0001-0003 are bug fixes and although 0004-0005 aren't exactly
bug fixes, I think it would be better to include them in 2.6.30.

diffstat follows.

 Documentation/kernel-parameters.txt |    6 +
 arch/x86/include/asm/percpu.h       |    9 +
 arch/x86/kernel/setup_percpu.c      |  199 +++++++++++++++++++++++++++---------
 arch/x86/mm/pageattr.c              |   63 +++++++----
 mm/percpu.c                         |   13 +-
 5 files changed, 218 insertions(+), 72 deletions(-)

Thanks.

--
tejun

[PATCH 1/5] x86: prepare setup_pcpu_remap() for pageattr fix

[Tejun Heo]

Make the following changes in preparation of coming pageattr updates.

* Define and use array of struct pcpur_ent instead of array of
  pointers.  The only difference is ->cpu field which is set but
  unused yet.

* Rename variables according to the above change.

* Rename local variable vm to pcpur_vm and move it out of the
  function.

[ Impact: no functional difference ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c |   58 ++++++++++++++++++++++-----------------
 1 files changed, 33 insertions(+), 25 deletions(-)

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 3a97a4c..c17059c 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -137,8 +137,14 @@ static void * __init pcpu_alloc_bootmem(unsigned int cpu, unsigned long size,
  * better than only using 4k mappings while still being NUMA friendly.
  */
 #ifdef CONFIG_NEED_MULTIPLE_NODES
+struct pcpur_ent {
+	unsigned int	cpu;
+	void		*ptr;
+};
+
 static size_t pcpur_size __initdata;
-static void **pcpur_ptrs __initdata;
+static struct pcpur_ent *pcpur_map __initdata;
+static struct vm_struct pcpur_vm;
 
 static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
 {
@@ -147,13 +153,12 @@ static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
 	if (off >= pcpur_size)
 		return NULL;
 
-	return virt_to_page(pcpur_ptrs[cpu] + off);
+	return virt_to_page(pcpur_map[cpu].ptr + off);
 }
 
 static ssize_t __init setup_pcpu_remap(size_t static_size)
 {
-	static struct vm_struct vm;
-	size_t ptrs_size, dyn_size;
+	size_t map_size, dyn_size;
 	unsigned int cpu;
 	ssize_t ret;
 
@@ -178,12 +183,14 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 	dyn_size = pcpur_size - static_size - PERCPU_FIRST_CHUNK_RESERVE;
 
 	/* allocate pointer array and alloc large pages */
-	ptrs_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_ptrs[0]));
-	pcpur_ptrs = alloc_bootmem(ptrs_size);
+	map_size = PFN_ALIGN(num_possible_cpus() * sizeof(pcpur_map[0]));
+	pcpur_map = alloc_bootmem(map_size);
 
 	for_each_possible_cpu(cpu) {
-		pcpur_ptrs[cpu] = pcpu_alloc_bootmem(cpu, PMD_SIZE, PMD_SIZE);
-		if (!pcpur_ptrs[cpu])
+		pcpur_map[cpu].cpu = cpu;
+		pcpur_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
+							PMD_SIZE);
+		if (!pcpur_map[cpu].ptr)
 			goto enomem;
 
 		/*
@@ -194,42 +201,43 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 		 * not well-specified to have a PAT-incompatible area
 		 * (unmapped RAM, device memory, etc.) in that hole.
 		 */
-		free_bootmem(__pa(pcpur_ptrs[cpu] + pcpur_size),
+		free_bootmem(__pa(pcpur_map[cpu].ptr + pcpur_size),
 			     PMD_SIZE - pcpur_size);
 
-		memcpy(pcpur_ptrs[cpu], __per_cpu_load, static_size);
+		memcpy(pcpur_map[cpu].ptr, __per_cpu_load, static_size);
 	}
 
 	/* allocate address and map */
-	vm.flags = VM_ALLOC;
-	vm.size = num_possible_cpus() * PMD_SIZE;
-	vm_area_register_early(&vm, PMD_SIZE);
+	pcpur_vm.flags = VM_ALLOC;
+	pcpur_vm.size = num_possible_cpus() * PMD_SIZE;
+	vm_area_register_early(&pcpur_vm, PMD_SIZE);
 
 	for_each_possible_cpu(cpu) {
-		pmd_t *pmd;
+		pmd_t *pmd, pmd_v;
 
-		pmd = populate_extra_pmd((unsigned long)vm.addr
-					 + cpu * PMD_SIZE);
-		set_pmd(pmd, pfn_pmd(page_to_pfn(virt_to_page(pcpur_ptrs[cpu])),
-				     PAGE_KERNEL_LARGE));
+		pmd = populate_extra_pmd((unsigned long)pcpur_vm.addr +
+					 cpu * PMD_SIZE);
+		pmd_v = pfn_pmd(page_to_pfn(virt_to_page(pcpur_map[cpu].ptr)),
+				PAGE_KERNEL_LARGE);
+		set_pmd(pmd, pmd_v);
 	}
 
 	/* we're ready, commit */
 	pr_info("PERCPU: Remapped at %p with large pages, static data "
-		"%zu bytes\n", vm.addr, static_size);
+		"%zu bytes\n", pcpur_vm.addr, static_size);
 
 	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
 				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
-				     PMD_SIZE, vm.addr, NULL);
-	goto out_free_ar;
+				     PMD_SIZE, pcpur_vm.addr, NULL);
+	goto out_free_map;
 
 enomem:
 	for_each_possible_cpu(cpu)
-		if (pcpur_ptrs[cpu])
-			free_bootmem(__pa(pcpur_ptrs[cpu]), PMD_SIZE);
+		if (pcpur_map[cpu].ptr)
+			free_bootmem(__pa(pcpur_map[cpu].ptr), PMD_SIZE);
 	ret = -ENOMEM;
-out_free_ar:
-	free_bootmem(__pa(pcpur_ptrs), ptrs_size);
+out_free_map:
+	free_bootmem(__pa(pcpur_map), map_size);
 	return ret;
 }
 #else
-- 
1.6.0.2

[PATCH 2/5] x86: reorganize cpa_process_alias()

[Tejun Heo]

Reorganize cpa_process_alias() so that new alias condition can be
added easily.

Jan Beulich spotted problem in the original cleanup thread which
incorrectly assumed the two existing conditions were mutially
exclusive.

[ Impact: code reorganization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c |   44 ++++++++++++++++++++------------------------
 1 files changed, 20 insertions(+), 24 deletions(-)

diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 797f9f1..8bc64b0 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -686,8 +686,8 @@ static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias);
 static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
-	int ret = 0;
 	unsigned long temp_cpa_vaddr, vaddr;
+	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
 		return 0;
@@ -715,38 +715,34 @@ static int cpa_process_alias(struct cpa_data *cpa)
 		alias_cpa.vaddr = &temp_cpa_vaddr;
 		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-
 		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
 	}
 
 #ifdef CONFIG_X86_64
-	if (ret)
-		return ret;
 	/*
-	 * No need to redo, when the primary call touched the high
-	 * mapping already:
-	 */
-	if (within(vaddr, (unsigned long) _text, _brk_end))
-		return 0;
-
-	/*
-	 * If the physical address is inside the kernel map, we need
+	 * If the primary call didn't touch the high mapping already
+	 * and the physical address is inside the kernel map, we need
 	 * to touch the high mapped kernel as well:
 	 */
-	if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
-		return 0;
-
-	alias_cpa = *cpa;
-	temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
-	alias_cpa.vaddr = &temp_cpa_vaddr;
-	alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+	if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+	    within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+		alias_cpa = *cpa;
+		temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+				 __START_KERNEL_map - phys_base;
+		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-	/*
-	 * The high mapping range is imprecise, so ignore the return value.
-	 */
-	__change_page_attr_set_clr(&alias_cpa, 0);
+		/*
+		 * The high mapping range is imprecise, so ignore the
+		 * return value.
+		 */
+		__change_page_attr_set_clr(&alias_cpa, 0);
+	}
 #endif
-	return ret;
+
+	return 0;
 }
 
 static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)
-- 
1.6.0.2

[PATCH UPDATED 2/5] x86: reorganize cpa_process_alias()

[Tejun Heo]

Reorganize cpa_process_alias() so that new alias condition can be
added easily.

Jan Beulich spotted problem in the original cleanup thread which
incorrectly assumed the two existing conditions were mutially
exclusive.

[ Impact: code reorganization ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/mm/pageattr.c |   50 ++++++++++++++++++++++---------------------------
 1 file changed, 23 insertions(+), 27 deletions(-)

Index: work/arch/x86/mm/pageattr.c
===================================================================
--- work.orig/arch/x86/mm/pageattr.c
+++ work/arch/x86/mm/pageattr.c
@@ -686,8 +686,9 @@ static int __change_page_attr_set_clr(st
 static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
-	int ret = 0;
-	unsigned long temp_cpa_vaddr, vaddr;
+	unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
+	unsigned long vaddr;
+	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
 		return 0;
@@ -711,42 +712,37 @@ static int cpa_process_alias(struct cpa_
 		    PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) {
 
 		alias_cpa = *cpa;
-		temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT);
-		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.vaddr = &laddr;
 		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-
 		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
 	}
 
 #ifdef CONFIG_X86_64
-	if (ret)
-		return ret;
-	/*
-	 * No need to redo, when the primary call touched the high
-	 * mapping already:
-	 */
-	if (within(vaddr, (unsigned long) _text, _brk_end))
-		return 0;
-
 	/*
-	 * If the physical address is inside the kernel map, we need
+	 * If the primary call didn't touch the high mapping already
+	 * and the physical address is inside the kernel map, we need
 	 * to touch the high mapped kernel as well:
 	 */
-	if (!within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn()))
-		return 0;
-
-	alias_cpa = *cpa;
-	temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) + __START_KERNEL_map - phys_base;
-	alias_cpa.vaddr = &temp_cpa_vaddr;
-	alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+	if (!within(vaddr, (unsigned long)_text, _brk_end) &&
+	    within(cpa->pfn, highmap_start_pfn(), highmap_end_pfn())) {
+		unsigned long temp_cpa_vaddr = (cpa->pfn << PAGE_SHIFT) +
+					       __START_KERNEL_map - phys_base;
+		alias_cpa = *cpa;
+		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
 
-	/*
-	 * The high mapping range is imprecise, so ignore the return value.
-	 */
-	__change_page_attr_set_clr(&alias_cpa, 0);
+		/*
+		 * The high mapping range is imprecise, so ignore the
+		 * return value.
+		 */
+		__change_page_attr_set_clr(&alias_cpa, 0);
+	}
 #endif
-	return ret;
+
+	return 0;
 }
 
 static int __change_page_attr_set_clr(struct cpa_data *cpa, int checkalias)

[PATCH 3/5] x86: fix pageattr handling for remap percpu allocator

[Tejun Heo]

Remap allocator aliases a PMD page for each cpu and returns whatever
is unused to the page allocator.  When the pageattr of the recycled
pages are changed, this makes the two aliases point to the overlapping
regions with different attributes which isn't allowed and known to
cause subtle data corruption in certain cases.

This can be handled in simliar manner to the x86_64 highmap alias.
pageattr code should detect if the target pages have PMD alias and
split the PMD alias and synchronize the attributes.

pcpur allocator is updated to keep the allocated PMD pages map sorted
in ascending address order and provide pcpu_pmd_remapped() function
which binary searches the array to determine whether the given address
is aliased and if so to which address.  pageattr is updated to use
pcpu_pmd_remapped() to detect the PMD alias and split it up as
necessary from cpa_process_alias().

This problem has been spotted by Jan Beulich.

[ Impact: fix subtle pageattr bug ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h  |    9 +++++
 arch/x86/kernel/setup_percpu.c |   68 ++++++++++++++++++++++++++++++++++++---
 arch/x86/mm/pageattr.c         |   23 +++++++++++++
 3 files changed, 94 insertions(+), 6 deletions(-)

diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index aee103b..cad3531 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -155,6 +155,15 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_pmd_remapped(void *kaddr);
+#else
+static inline void *pcpu_pmd_remapped(void *kaddr)
+{
+	return NULL;
+}
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index c17059c..dd567a7 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -142,8 +142,8 @@ struct pcpur_ent {
 	void		*ptr;
 };
 
-static size_t pcpur_size __initdata;
-static struct pcpur_ent *pcpur_map __initdata;
+static size_t pcpur_size;
+static struct pcpur_ent *pcpur_map;
 static struct vm_struct pcpur_vm;
 
 static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
@@ -160,6 +160,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 {
 	size_t map_size, dyn_size;
 	unsigned int cpu;
+	int i, j;
 	ssize_t ret;
 
 	/*
@@ -229,16 +230,71 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
 				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
 				     PMD_SIZE, pcpur_vm.addr, NULL);
-	goto out_free_map;
+
+	/* sort pcpur_map array for pcpu_pmd_remapped() */
+	for (i = 0; i < num_possible_cpus() - 1; i++)
+		for (j = i + 1; j < num_possible_cpus(); j++)
+			if (pcpur_map[i].ptr > pcpur_map[j].ptr) {
+				struct pcpur_ent tmp = pcpur_map[i];
+				pcpur_map[i] = pcpur_map[j];
+				pcpur_map[j] = tmp;
+			}
+
+	return ret;
 
 enomem:
 	for_each_possible_cpu(cpu)
 		if (pcpur_map[cpu].ptr)
 			free_bootmem(__pa(pcpur_map[cpu].ptr), PMD_SIZE);
-	ret = -ENOMEM;
-out_free_map:
 	free_bootmem(__pa(pcpur_map), map_size);
-	return ret;
+	return -ENOMEM;
+}
+
+/**
+ * pcpu_pmd_remapped - determine whether a kaddr is in pcpur recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpur recycled area.  This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_pmd_remapped(void *kaddr)
+{
+	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+	int left = 0, right = num_possible_cpus() - 1;
+	int pos;
+
+	/* pcpur in use at all? */
+	if (!pcpur_map)
+		return NULL;
+
+	/* okay, perform binary search */
+	while (left <= right) {
+		pos = (left + right) / 2;
+
+		if (pcpur_map[pos].ptr < pmd_addr)
+			left = pos + 1;
+		else if (pcpur_map[pos].ptr > pmd_addr)
+			right = pos - 1;
+		else {
+			/* it shouldn't be in the area for the first chunk */
+			WARN_ON(offset < pcpur_size);
+
+			return pcpur_vm.addr +
+				pcpur_map[pos].cpu * PMD_SIZE + offset;
+		}
+	}
+
+	return NULL;
 }
 #else
 static ssize_t __init setup_pcpu_remap(size_t static_size)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 8bc64b0..a1bcead 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
+#include <linux/pfn.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
@@ -687,6 +688,7 @@ static int cpa_process_alias(struct cpa_data *cpa)
 {
 	struct cpa_data alias_cpa;
 	unsigned long temp_cpa_vaddr, vaddr;
+	void *remapped;
 	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
@@ -742,6 +744,27 @@ static int cpa_process_alias(struct cpa_data *cpa)
 	}
 #endif
 
+	/*
+	 * If the PMD page was partially used for per-cpu remapping,
+	 * the remapped area needs to be split and modified.  Note
+	 * that the partial recycling only happens at the tail of a
+	 * partially used PMD page, so touching single PMD page is
+	 * always enough.
+	 */
+	remapped = pcpu_pmd_remapped((void *)vaddr);
+	if (remapped) {
+		int max_pages = PFN_DOWN(PMD_SIZE - (vaddr & ~PMD_MASK));
+
+		alias_cpa = *cpa;
+		temp_cpa_vaddr = (unsigned long)remapped;
+		alias_cpa.vaddr = &temp_cpa_vaddr;
+		alias_cpa.numpages = min(alias_cpa.numpages, max_pages);
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
-- 
1.6.0.2

Re: [PATCH 3/5] x86: fix pageattr handling for remap percpu allocator

[Jan Beulich]

>>> Tejun Heo <tj@kernel.org> 15.05.09 06:28 >>>
>@@ -742,6 +744,27 @@ static int cpa_process_alias(struct cpa_data *cpa)
> 	}
> #endif
> 
>+	/*
>+	 * If the PMD page was partially used for per-cpu remapping,
>+	 * the remapped area needs to be split and modified.  Note
>+	 * that the partial recycling only happens at the tail of a
>+	 * partially used PMD page, so touching single PMD page is
>+	 * always enough.
>+	 */
>+	remapped = pcpu_pmd_remapped((void *)vaddr);

vaddr here is the passed-in address, but in order for the lookup to be positive
it needs to be the canonical address (i.e. the one pointing into the 1:1 mapping),
i.e. __va(cpa->pfn << PAGE_SHIFT), just like temp_cpa_vaddr gets calculated
earlier in the same function.

>+	if (remapped) {
>+		int max_pages = PFN_DOWN(PMD_SIZE - (vaddr & ~PMD_MASK));
>+
>+		alias_cpa = *cpa;
>+		temp_cpa_vaddr = (unsigned long)remapped;
>+		alias_cpa.vaddr = &temp_cpa_vaddr;
>+		alias_cpa.numpages = min(alias_cpa.numpages, max_pages);
>+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
>+		ret = __change_page_attr_set_clr(&alias_cpa, 0);
>+		if (ret)
>+			return ret;
>+	}
>+
> 	return 0;
> }

Sorry for not having spotted this yesterday,
Jan

Re: [PATCH 3/5] x86: fix pageattr handling for remap percpu allocator

[Tejun Heo]

Hello,

Jan Beulich wrote:
>>>> Tejun Heo <tj@kernel.org> 15.05.09 06:28 >>>
>> @@ -742,6 +744,27 @@ static int cpa_process_alias(struct cpa_data *cpa)
>> 	}
>> #endif
>>
>> +	/*
>> +	 * If the PMD page was partially used for per-cpu remapping,
>> +	 * the remapped area needs to be split and modified.  Note
>> +	 * that the partial recycling only happens at the tail of a
>> +	 * partially used PMD page, so touching single PMD page is
>> +	 * always enough.
>> +	 */
>> +	remapped = pcpu_pmd_remapped((void *)vaddr);
> 
> vaddr here is the passed-in address, but in order for the lookup to
> be positive it needs to be the canonical address (i.e. the one
> pointing into the 1:1 mapping), i.e. __va(cpa->pfn << PAGE_SHIFT),
> just like temp_cpa_vaddr gets calculated earlier in the same
> function.

Hmmm... There's no need to match percpu map -> linear addr.  Okay,
right, if the recycled part has been aliased to different vmalloc
mapping than the pfn should be matched.

Thanks for spotting it.  Will posted updated patch.

-- 
tejun

[PATCH UPDATED 3/5] x86: fix pageattr handling for remap percpu allocator

[Tejun Heo]

Remap allocator aliases a PMD page for each cpu and returns whatever
is unused to the page allocator.  When the pageattr of the recycled
pages are changed, this makes the two aliases point to the overlapping
regions with different attributes which isn't allowed and known to
cause subtle data corruption in certain cases.

This can be handled in simliar manner to the x86_64 highmap alias.
pageattr code should detect if the target pages have PMD alias and
split the PMD alias and synchronize the attributes.

pcpur allocator is updated to keep the allocated PMD pages map sorted
in ascending address order and provide pcpu_pmd_remapped() function
which binary searches the array to determine whether the given address
is aliased and if so to which address.  pageattr is updated to use
pcpu_pmd_remapped() to detect the PMD alias and split it up as
necessary from cpa_process_alias().

Jan Beulich spotted the original problem and incorrect usage of vaddr
instead of laddr for lookup.

[ Impact: fix subtle pageattr bug ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/include/asm/percpu.h  |    9 +++++
 arch/x86/kernel/setup_percpu.c |   68 +++++++++++++++++++++++++++++++++++++----
 arch/x86/mm/pageattr.c         |   26 +++++++++++++++
 3 files changed, 96 insertions(+), 7 deletions(-)

Index: work/arch/x86/include/asm/percpu.h
===================================================================
--- work.orig/arch/x86/include/asm/percpu.h
+++ work/arch/x86/include/asm/percpu.h
@@ -155,6 +155,15 @@ do {							\
 /* We can use this directly for local CPU (faster). */
 DECLARE_PER_CPU(unsigned long, this_cpu_off);
 
+#ifdef CONFIG_NEED_MULTIPLE_NODES
+void *pcpu_pmd_remapped(void *kaddr);
+#else
+static inline void *pcpu_pmd_remapped(void *kaddr)
+{
+	return NULL;
+}
+#endif
+
 #endif /* !__ASSEMBLY__ */
 
 #ifdef CONFIG_SMP
Index: work/arch/x86/kernel/setup_percpu.c
===================================================================
--- work.orig/arch/x86/kernel/setup_percpu.c
+++ work/arch/x86/kernel/setup_percpu.c
@@ -142,8 +142,8 @@ struct pcpur_ent {
 	void		*ptr;
 };
 
-static size_t pcpur_size __initdata;
-static struct pcpur_ent *pcpur_map __initdata;
+static size_t pcpur_size;
+static struct pcpur_ent *pcpur_map;
 static struct vm_struct pcpur_vm;
 
 static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
@@ -160,6 +160,7 @@ static ssize_t __init setup_pcpu_remap(s
 {
 	size_t map_size, dyn_size;
 	unsigned int cpu;
+	int i, j;
 	ssize_t ret;
 
 	/*
@@ -229,16 +230,71 @@ static ssize_t __init setup_pcpu_remap(s
 	ret = pcpu_setup_first_chunk(pcpur_get_page, static_size,
 				     PERCPU_FIRST_CHUNK_RESERVE, dyn_size,
 				     PMD_SIZE, pcpur_vm.addr, NULL);
-	goto out_free_map;
+
+	/* sort pcpur_map array for pcpu_pmd_remapped() */
+	for (i = 0; i < num_possible_cpus() - 1; i++)
+		for (j = i + 1; j < num_possible_cpus(); j++)
+			if (pcpur_map[i].ptr > pcpur_map[j].ptr) {
+				struct pcpur_ent tmp = pcpur_map[i];
+				pcpur_map[i] = pcpur_map[j];
+				pcpur_map[j] = tmp;
+			}
+
+	return ret;
 
 enomem:
 	for_each_possible_cpu(cpu)
 		if (pcpur_map[cpu].ptr)
 			free_bootmem(__pa(pcpur_map[cpu].ptr), PMD_SIZE);
-	ret = -ENOMEM;
-out_free_map:
 	free_bootmem(__pa(pcpur_map), map_size);
-	return ret;
+	return -ENOMEM;
+}
+
+/**
+ * pcpu_pmd_remapped - determine whether a kaddr is in pcpur recycled area
+ * @kaddr: the kernel address in question
+ *
+ * Determine whether @kaddr falls in the pcpur recycled area.  This is
+ * used by pageattr to detect VM aliases and break up the pcpu PMD
+ * mapping such that the same physical page is not mapped under
+ * different attributes.
+ *
+ * The recycled area is always at the tail of a partially used PMD
+ * page.
+ *
+ * RETURNS:
+ * Address of corresponding remapped pcpu address if match is found;
+ * otherwise, NULL.
+ */
+void *pcpu_pmd_remapped(void *kaddr)
+{
+	void *pmd_addr = (void *)((unsigned long)kaddr & PMD_MASK);
+	unsigned long offset = (unsigned long)kaddr & ~PMD_MASK;
+	int left = 0, right = num_possible_cpus() - 1;
+	int pos;
+
+	/* pcpur in use at all? */
+	if (!pcpur_map)
+		return NULL;
+
+	/* okay, perform binary search */
+	while (left <= right) {
+		pos = (left + right) / 2;
+
+		if (pcpur_map[pos].ptr < pmd_addr)
+			left = pos + 1;
+		else if (pcpur_map[pos].ptr > pmd_addr)
+			right = pos - 1;
+		else {
+			/* it shouldn't be in the area for the first chunk */
+			WARN_ON(offset < pcpur_size);
+
+			return pcpur_vm.addr +
+				pcpur_map[pos].cpu * PMD_SIZE + offset;
+		}
+	}
+
+	return NULL;
 }
 #else
 static ssize_t __init setup_pcpu_remap(size_t static_size)
Index: work/arch/x86/mm/pageattr.c
===================================================================
--- work.orig/arch/x86/mm/pageattr.c
+++ work/arch/x86/mm/pageattr.c
@@ -11,6 +11,7 @@
 #include <linux/interrupt.h>
 #include <linux/seq_file.h>
 #include <linux/debugfs.h>
+#include <linux/pfn.h>
 
 #include <asm/e820.h>
 #include <asm/processor.h>
@@ -687,7 +688,7 @@ static int cpa_process_alias(struct cpa_
 {
 	struct cpa_data alias_cpa;
 	unsigned long laddr = (unsigned long)__va(cpa->pfn << PAGE_SHIFT);
-	unsigned long vaddr;
+	unsigned long vaddr, remapped;
 	int ret;
 
 	if (cpa->pfn >= max_pfn_mapped)
@@ -742,6 +743,29 @@ static int cpa_process_alias(struct cpa_
 	}
 #endif
 
+	/*
+	 * If the PMD page was partially used for per-cpu remapping,
+	 * the remapped area needs to be split and modified.  Note
+	 * that the partial recycling only happens at the tail of a
+	 * partially used PMD page, so touching single PMD page is
+	 * always enough.
+	 *
+	 * Look up alias using the linear address to detect, for
+	 * example, recycled pages which got vmapped.
+	 */
+	remapped = (unsigned long)pcpu_pmd_remapped((void *)laddr);
+	if (remapped) {
+		int max_pages = PFN_DOWN(PMD_SIZE - (vaddr & ~PMD_MASK));
+
+		alias_cpa = *cpa;
+		alias_cpa.vaddr = &remapped;
+		alias_cpa.numpages = min(alias_cpa.numpages, max_pages);
+		alias_cpa.flags &= ~(CPA_PAGES_ARRAY | CPA_ARRAY);
+		ret = __change_page_attr_set_clr(&alias_cpa, 0);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 

[PATCH 4/5] x86: implement percpu_alloc kernel parameter

[Tejun Heo]

According to Andi, it isn't clear whether remap allocator is worth the
trouble as there are many processors where PMD TLB is far scarcer than
PTE TLB.  The advantage or disadvantage probably depends on the actual
size of percpu area and specific processor.  As performance
degradation due to TLB pressure tends to be highly workload specific
and subtle, it is difficult to decide which way to go without more
data.

This patch implements percpu_alloc kernel parameter to allow selecting
which first chunk allocator to use to ease debugging and testing.

While at it, make sure all the failure paths report why something
failed to help determining why certain allocator isn't working.  Also,
kill the "Great future plan" comment which had already been realized
quite some time ago.

[ Impact: allow explicit percpu first chunk allocator selection ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 Documentation/kernel-parameters.txt |    6 +++
 arch/x86/kernel/setup_percpu.c      |   69 +++++++++++++++++++++++++----------
 mm/percpu.c                         |   13 +++++--
 3 files changed, 65 insertions(+), 23 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e87bdbf..929bb3a 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1837,6 +1837,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: { 0 | 1 }
 			See arch/parisc/kernel/pdc_chassis.c
 
+	percpu_alloc=	[X86] Select which percpu first chunk allocator to use.
+			Allowed values are one of "remap", "embed" and "4k".
+			See comments in arch/x86/kernel/setup_percpu.c for
+			details on each allocator.  This parameter is primarily
+			for debugging and performance comparison.
+
 	pf.		[PARIDE]
 			See Documentation/blockdev/paride.txt.
 
diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index dd567a7..29be178 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -156,18 +156,21 @@ static struct page * __init pcpur_get_page(unsigned int cpu, int pageno)
 	return virt_to_page(pcpur_map[cpu].ptr + off);
 }
 
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_remap(size_t static_size, bool chosen)
 {
 	size_t map_size, dyn_size;
 	unsigned int cpu;
 	int i, j;
 	ssize_t ret;
 
-	/*
-	 * If large page isn't supported, there's no benefit in doing
-	 * this.  Also, on non-NUMA, embedding is better.
-	 */
-	if (!cpu_has_pse || !pcpu_need_numa())
+	/* need PSE */
+	if (!cpu_has_pse) {
+		pr_warning("PERCPU: remap allocator requires PSE\n");
+		return -EINVAL;
+	}
+
+	/* on non-NUMA, embedding is better */
+	if (!chosen && !pcpu_need_numa())
 		return -EINVAL;
 
 	/*
@@ -191,8 +194,11 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
 		pcpur_map[cpu].cpu = cpu;
 		pcpur_map[cpu].ptr = pcpu_alloc_bootmem(cpu, PMD_SIZE,
 							PMD_SIZE);
-		if (!pcpur_map[cpu].ptr)
+		if (!pcpur_map[cpu].ptr) {
+			pr_warning("PERCPU: failed to allocate large page "
+				   "for cpu%u\n", cpu);
 			goto enomem;
+		}
 
 		/*
 		 * Only use pcpur_size bytes and give back the rest.
@@ -297,7 +303,7 @@ void *pcpu_pmd_remapped(void *kaddr)
 	return NULL;
 }
 #else
-static ssize_t __init setup_pcpu_remap(size_t static_size)
+static ssize_t __init setup_pcpu_remap(size_t static_size, bool chosen)
 {
 	return -EINVAL;
 }
@@ -311,7 +317,7 @@ static ssize_t __init setup_pcpu_remap(size_t static_size)
  * mapping so that it can use PMD mapping without additional TLB
  * pressure.
  */
-static ssize_t __init setup_pcpu_embed(size_t static_size)
+static ssize_t __init setup_pcpu_embed(size_t static_size, bool chosen)
 {
 	size_t reserve = PERCPU_MODULE_RESERVE + PERCPU_DYNAMIC_RESERVE;
 
@@ -320,7 +326,7 @@ static ssize_t __init setup_pcpu_embed(size_t static_size)
 	 * this.  Also, embedding allocation doesn't play well with
 	 * NUMA.
 	 */
-	if (!cpu_has_pse || pcpu_need_numa())
+	if (!chosen && (!cpu_has_pse || pcpu_need_numa()))
 		return -EINVAL;
 
 	return pcpu_embed_first_chunk(static_size, PERCPU_FIRST_CHUNK_RESERVE,
@@ -370,8 +376,11 @@ static ssize_t __init setup_pcpu_4k(size_t static_size)
 			void *ptr;
 
 			ptr = pcpu_alloc_bootmem(cpu, PAGE_SIZE, PAGE_SIZE);
-			if (!ptr)
+			if (!ptr) {
+				pr_warning("PERCPU: failed to allocate "
+					   "4k page for cpu%u\n", cpu);
 				goto enomem;
+			}
 
 			memcpy(ptr, __per_cpu_load + i * PAGE_SIZE, PAGE_SIZE);
 			pcpu4k_pages[j++] = virt_to_page(ptr);
@@ -395,6 +404,16 @@ out_free_ar:
 	return ret;
 }
 
+/* for explicit first chunk allocator selection */
+static char pcpu_chosen_alloc[16] __initdata;
+
+static int __init percpu_alloc_setup(char *str)
+{
+	strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
+	return 0;
+}
+early_param("percpu_alloc", percpu_alloc_setup);
+
 static inline void setup_percpu_segment(int cpu)
 {
 #ifdef CONFIG_X86_32
@@ -408,11 +427,6 @@ static inline void setup_percpu_segment(int cpu)
 #endif
 }
 
-/*
- * Great future plan:
- * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data.
- * Always point %gs to its beginning
- */
 void __init setup_per_cpu_areas(void)
 {
 	size_t static_size = __per_cpu_end - __per_cpu_start;
@@ -429,9 +443,26 @@ void __init setup_per_cpu_areas(void)
 	 * of large page mappings.  Please read comments on top of
 	 * each allocator for details.
 	 */
-	ret = setup_pcpu_remap(static_size);
-	if (ret < 0)
-		ret = setup_pcpu_embed(static_size);
+	ret = -EINVAL;
+	if (strlen(pcpu_chosen_alloc)) {
+		if (strcmp(pcpu_chosen_alloc, "4k")) {
+			if (!strcmp(pcpu_chosen_alloc, "remap"))
+				ret = setup_pcpu_remap(static_size, true);
+			else if (!strcmp(pcpu_chosen_alloc, "embed"))
+				ret = setup_pcpu_embed(static_size, true);
+			else
+				pr_warning("PERCPU: unknown allocator %s "
+					   "specified\n", pcpu_chosen_alloc);
+			if (ret < 0)
+				pr_warning("PERCPU: %s allocator failed (%zd), "
+					   "falling back to 4k\n",
+					   pcpu_chosen_alloc, ret);
+		}
+	} else {
+		ret = setup_pcpu_remap(static_size, false);
+		if (ret < 0)
+			ret = setup_pcpu_embed(static_size, false);
+	}
 	if (ret < 0)
 		ret = setup_pcpu_4k(static_size);
 	if (ret < 0)
diff --git a/mm/percpu.c b/mm/percpu.c
index 1aa5d8f..d42f2ce 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1287,6 +1287,7 @@ static struct page * __init pcpue_get_page(unsigned int cpu, int pageno)
 ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size,
 				      ssize_t dyn_size, ssize_t unit_size)
 {
+	size_t chunk_size;
 	unsigned int cpu;
 
 	/* determine parameters and allocate */
@@ -1301,11 +1302,15 @@ ssize_t __init pcpu_embed_first_chunk(size_t static_size, size_t reserved_size,
 	} else
 		pcpue_unit_size = max_t(size_t, pcpue_size, PCPU_MIN_UNIT_SIZE);
 
-	pcpue_ptr = __alloc_bootmem_nopanic(
-					num_possible_cpus() * pcpue_unit_size,
-					PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
-	if (!pcpue_ptr)
+	chunk_size = pcpue_unit_size * num_possible_cpus();
+
+	pcpue_ptr = __alloc_bootmem_nopanic(chunk_size, PAGE_SIZE,
+					    __pa(MAX_DMA_ADDRESS));
+	if (!pcpue_ptr) {
+		pr_warning("PERCPU: failed to allocate %zu bytes for "
+			   "embedding\n", chunk_size);
 		return -ENOMEM;
+	}
 
 	/* return the leftover and copy */
 	for_each_possible_cpu(cpu) {
-- 
1.6.0.2

Re: [PATCH 4/5] x86: implement percpu_alloc kernel parameter

[Jan Beulich]

>>> Tejun Heo <tj@kernel.org> 15.05.09 06:28 >>>
>@@ -395,6 +404,16 @@ out_free_ar:
> 	return ret;
> }
> 
>+/* for explicit first chunk allocator selection */
>+static char pcpu_chosen_alloc[16] __initdata;
>+
>+static int __init percpu_alloc_setup(char *str)
>+{
>+	strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
>+	return 0;
>+}
>+early_param("percpu_alloc", percpu_alloc_setup);
>+
> static inline void setup_percpu_segment(int cpu)
> {
> #ifdef CONFIG_X86_32

Does this really need to be early_param()? setup_per_cpu_areas() runs
after setup_arch(), which is where the full command line parsing happens.

Jan

Re: [PATCH 4/5] x86: implement percpu_alloc kernel parameter

[Tejun Heo]

Jan Beulich wrote:
>>>> Tejun Heo <tj@kernel.org> 15.05.09 06:28 >>>
>> @@ -395,6 +404,16 @@ out_free_ar:
>> 	return ret;
>> }
>>
>> +/* for explicit first chunk allocator selection */
>> +static char pcpu_chosen_alloc[16] __initdata;
>> +
>> +static int __init percpu_alloc_setup(char *str)
>> +{
>> +	strncpy(pcpu_chosen_alloc, str, sizeof(pcpu_chosen_alloc) - 1);
>> +	return 0;
>> +}
>> +early_param("percpu_alloc", percpu_alloc_setup);
>> +
>> static inline void setup_percpu_segment(int cpu)
>> {
>> #ifdef CONFIG_X86_32
> 
> Does this really need to be early_param()? setup_per_cpu_areas()
> runs after setup_arch(), which is where the full command line
> parsing happens.

__setup() callbacks ran after PERCPU allocation.  Confirmed with
printk.

Thanks.

-- 
tejun

[PATCH 5/5] x86: ensure percpu remap doesn't consume too much vmalloc space

[Tejun Heo]

On extreme configuration (e.g. 32bit 32-way NUMA machine), remap
percpu first chunk allocator can consume too much of vmalloc space.
Make it fall back to 4k allocator if the consumption goes over 20%.

[ Impact: add sanity check for remap percpu first chunk allocator ]

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jan Beulich <JBeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Ingo Molnar <mingo@elte.hu>
---
 arch/x86/kernel/setup_percpu.c |   18 +++++++++++++++---
 1 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c
index 29be178..1f28574 100644
--- a/arch/x86/kernel/setup_percpu.c
+++ b/arch/x86/kernel/setup_percpu.c
@@ -169,9 +169,21 @@ static ssize_t __init setup_pcpu_remap(size_t static_size, bool chosen)
 		return -EINVAL;
 	}
 
-	/* on non-NUMA, embedding is better */
-	if (!chosen && !pcpu_need_numa())
-		return -EINVAL;
+	if (!chosen) {
+		size_t vm_size = VMALLOC_END - VMALLOC_START;
+		size_t tot_size = num_possible_cpus() * PMD_SIZE;
+
+		/* on non-NUMA, embedding is better */
+		if (!pcpu_need_numa())
+			return -EINVAL;
+
+		/* don't consume more than 20% of vmalloc area */
+		if (tot_size > vm_size / 5) {
+			pr_info("PERCPU: too large chunk size %zuMB for "
+				"large page remap\n", tot_size >> 20);
+			return -EINVAL;
+		}
+	}
 
 	/*
 	 * Currently supports only single page.  Supporting multiple
-- 
1.6.0.2

Re: [GIT PATCH 2.6.30-rc5] x86,percpu: fix pageattr handling with remap allocator, take#2

[Tejun Heo]

Tejun Heo wrote:
> Hello,
> 
> Upon ack, please pull from the following git tree.
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git x86-percpu-pageattr

Patches 0002 and 0003 updated per Jan's comments.  New git commit ID
is 229f8495873f9f8928c9c99f790f2e0f4b6b0804.

Thanks.

-- 
tejun

Re: [GIT PATCH 2.6.30-rc5] x86,percpu: fix pageattr handling withremap allocator, take#2

[Jan Beulich]

>>> Tejun Heo <teheo@novell.com> 15.05.09 11:36 >>>
>Tejun Heo wrote:
>> Hello,
>> 
>> Upon ack, please pull from the following git tree.
>> 
>>   git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git x86-percpu-pageattr
>
>Patches 0002 and 0003 updated per Jan's comments.  New git commit ID
>is 229f8495873f9f8928c9c99f790f2e0f4b6b0804.

With this the whole series is

Reviewed-by: Jan Beulich <jbeulich@novell.com>

Re: [GIT PATCH 2.6.30-rc5] x86,percpu: fix pageattr handling withremap allocator, take#2

[Tejun Heo]

Jan Beulich wrote:
>>>> Tejun Heo <teheo@novell.com> 15.05.09 11:36 >>>
>> Tejun Heo wrote:
>>> Hello,
>>>
>>> Upon ack, please pull from the following git tree.
>>>
>>>   git://git.kernel.org/pub/scm/linux/kernel/git/tj/misc.git x86-percpu-pageattr
>> Patches 0002 and 0003 updated per Jan's comments.  New git commit ID
>> is 229f8495873f9f8928c9c99f790f2e0f4b6b0804.
> 
> With this the whole series is
> 
> Reviewed-by: Jan Beulich <jbeulich@novell.com>

Thanks.  Much appreciated.

-- 
tejun