From: "Éric Piel" <eric.piel@tremplin-utc.net>
To: Isaac702 <isaac702@gmail.com>, Andrew Morton <akpm@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>, LKML <linux-kernel@vger.kernel.org>,
Christian Weidle <slateroni@gmail.com>,
Pavel Herrmann <morpheus.ibis@gmail.com>
Subject: Re: [PATCH 4/4] lis3: Add three new laptop models
Date: Thu, 21 May 2009 13:38:13 +0200 [thread overview]
Message-ID: <4A153D25.8050907@tremplin-utc.net> (raw)
In-Reply-To: <36a8c4f10905210424i65f5efadjdd6f13dea77cb2e6@mail.gmail.com>
Op 21-05-09 13:24, Isaac702 schreef:
> I apologize however when I reported that I was still using the 6710
> settings. When the normal axis settings were used the results showed the
> 6715 should be using "y_inverted" to behave normally.
> I'm sorry for reporting this incorrectly in the beginning.
>
Thank you for noticing this so quickly. Here is an updated patch.
Eric
==
Separate the 6710 and 6715, and set the right axis information for the
6715.
Reported-by: Isaac702 <isaac702@gmail.com>
Add the 6930.
Reported-by: Christian Weidle <slateroni@gmail.com>
Add the 2710.
Reported-by: Pavel Herrmann <morpheus.ibis@gmail.com>
Signed-off-by: Éric Piel <eric.piel@tremplin-utc.net>
---
drivers/hwmon/hp_accel.c | 7 +++++--
1 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index 92db68e..6679854 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -158,6 +158,7 @@ static struct axis_conversion lis3lv02d_axis_normal = {1, 2, 3};
static struct axis_conversion lis3lv02d_axis_y_inverted = {1, -2, 3};
static struct axis_conversion lis3lv02d_axis_x_inverted = {-1, 2, 3};
static struct axis_conversion lis3lv02d_axis_z_inverted = {1, 2, -3};
+static struct axis_conversion lis3lv02d_axis_xy_swap = {2, 1, 3};
static struct axis_conversion lis3lv02d_axis_xy_rotated_left = {-2, 1, 3};
static struct axis_conversion lis3lv02d_axis_xy_rotated_left_usd = {-2, 1, -3};
static struct axis_conversion lis3lv02d_axis_xy_swap_inverted = {-2, -1, 3};
@@ -191,13 +192,16 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
AXIS_DMI_MATCH("NX9420", "HP Compaq nx9420", x_inverted),
AXIS_DMI_MATCH("NW9440", "HP Compaq nw9440", x_inverted),
AXIS_DMI_MATCH("NC2510", "HP Compaq 2510", y_inverted),
+ AXIS_DMI_MATCH("NC2710", "HP Compaq 2710", xy_swap),
AXIS_DMI_MATCH("NC8510", "HP Compaq 8510", xy_swap_inverted),
AXIS_DMI_MATCH("HP2133", "HP 2133", xy_rotated_left),
AXIS_DMI_MATCH("HP2140", "HP 2140", xy_swap_inverted),
AXIS_DMI_MATCH("NC653x", "HP Compaq 653", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC673x", "HP Compaq 673", xy_rotated_left_usd),
AXIS_DMI_MATCH("NC651xx", "HP Compaq 651", xy_rotated_right),
- AXIS_DMI_MATCH("NC671xx", "HP Compaq 671", xy_swap_yz_inverted),
+ AXIS_DMI_MATCH("NC6710x", "HP Compaq 6710", xy_swap_yz_inverted),
+ AXIS_DMI_MATCH("NC6715x", "HP Compaq 6715", y_inverted),
+ AXIS_DMI_MATCH("NC693xx", "HP EliteBook 693", xy_rotated_right),
/* Intel-based HP Pavilion dv5 */
AXIS_DMI_MATCH2("HPDV5_I",
PRODUCT_NAME, "HP Pavilion dv5",
@@ -213,7 +217,6 @@ static struct dmi_system_id lis3lv02d_dmi_ids[] = {
{ NULL, }
/* Laptop models without axis info (yet):
* "NC6910" "HP Compaq 6910"
- * HP Compaq 8710x Notebook PC / Mobile Workstation
* "NC2400" "HP Compaq nc2400"
* "NX74x0" "HP Compaq nx74"
* "NX6325" "HP Compaq nx6325"
--
1.6.2.4
prev parent reply other threads:[~2009-05-21 11:38 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-21 9:27 [PATCH 0/4] lis3: clean up and updates Éric Piel
2009-05-21 9:29 ` [PATCH 1/4] lis3: fix misc device unregistering and printk Éric Piel
2009-05-21 10:48 ` Pavel Machek
2009-05-21 9:30 ` [PATCH 2/4] lis3: remove automatic shutdown of the device Éric Piel
2009-05-21 11:36 ` Pavel Machek
2009-05-21 11:55 ` Éric Piel
2009-05-21 12:08 ` Pavel Machek
2009-05-21 9:31 ` [PATCH 3/4] lis3: use input_polled_device Éric Piel
2009-05-21 9:33 ` [PATCH 4/4] lis3: Add three new laptop models Éric Piel
2009-05-21 10:49 ` Pavel Machek
2009-05-21 11:07 ` Éric Piel
2009-05-21 11:36 ` Isaac702
[not found] ` <36a8c4f10905210424i65f5efadjdd6f13dea77cb2e6@mail.gmail.com>
2009-05-21 11:38 ` Éric Piel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A153D25.8050907@tremplin-utc.net \
--to=eric.piel@tremplin-utc.net \
--cc=akpm@linux-foundation.org \
--cc=isaac702@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=morpheus.ibis@gmail.com \
--cc=pavel@ucw.cz \
--cc=slateroni@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox