From: Ian Molton <ian@mnementh.co.uk>
To: Philipp Zabel <philipp.zabel@gmail.com>
Cc: linux-kernel@vger.kernel.org, Pierre Ossman <pierre@ossman.eu>
Subject: Re: [PATCH 6/7] mmc: tmio_mmc: fix SDCLK divider setting
Date: Fri, 12 Jun 2009 22:44:22 +0100 [thread overview]
Message-ID: <4A32CC36.2070207@mnementh.co.uk> (raw)
In-Reply-To: <1244139157-16404-7-git-send-email-philipp.zabel@gmail.com>
Philipp Zabel wrote:
> Except for the SDCLK = HCLK (divider bypassed) case, the clock
> setting resulted in double the requested frequency.
> The smallest possible frequency (f_max/512) is configured with
> a divider setting 0x80, not 0x40.
I have (IMO) a better fix, which also removes some crap being written to
CTL_SD_CARD_CLK_CTL.
Pierre, please replace patch 6/7 from Philips set with this one.
From e69efa520b07a688643ce5f8e8d41bef753ff1ed Mon Sep 17 00:00:00 2001
From: Ian Molton <ian@mnementh.co.uk>
Date: Fri, 12 Jun 2009 21:53:05 +0100
Subject: [PATCH] MMC: fix clock setup in tmio_mmc
This patch fixes the clock setup in tmio_mmc.
* Incorrect divider setting
* Cruft written to the clock registers (seemingly harmless but Not
Good (tm))
It also eliminates some unnecessary ifs and tidies the loop syntax.
Thanks to Philipp Zabel who discovered the divider issue, commenting
"Except for the SDCLK = HCLK (divider bypassed) case, the clock
setting resulted in double the requested frequency.
The smallest possible frequency (f_max/512) is configured with
a divider setting 0x80, not 0x40."
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
---
drivers/mmc/host/tmio_mmc.c | 15 +++++----------
1 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c
index fe6d2b6..10951b7 100644
--- a/drivers/mmc/host/tmio_mmc.c
+++ b/drivers/mmc/host/tmio_mmc.c
@@ -37,22 +37,17 @@
static void tmio_mmc_set_clock(struct tmio_mmc_host *host, int new_clock)
{
- u32 clk = 0, clock, f_min = host->mmc->f_min;
+ u32 clk = 0, clock;
if (new_clock) {
- for (clock = f_min, clk = 0x100; new_clock >= (clock<<1); ) {
+ for (clock = host->mmc->f_min, clk = 0x80000080;
+ new_clock >= (clock<<1); clk >>= 1)
clock <<= 1;
- clk >>= 1;
- }
- if (clk & 0x1)
- clk = 0x20000;
-
- clk >>= 2;
- sd_config_write8(host, CNF_SD_CLK_MODE, (clk & 0x8000) ? 0 : 1);
clk |= 0x100;
}
- sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk);
+ sd_config_write8(host, CNF_SD_CLK_MODE, clk >> 22);
+ sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & 0x1ff);
}
static void tmio_mmc_clk_stop(struct tmio_mmc_host *host)
--
1.6.3.1
next prev parent reply other threads:[~2009-06-12 21:44 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-04 18:12 [PATCH 0/7] ASIC3 support for tmio_mmc Philipp Zabel
2009-06-04 18:12 ` [PATCH 1/7] MFD,mmc: tmio_mmc: make HCLK configurable Philipp Zabel
2009-06-04 22:55 ` Samuel Ortiz
2009-06-04 18:12 ` [PATCH 2/7] mmc: tmio_mmc: add bus_shift support Philipp Zabel
2009-06-04 18:12 ` [PATCH 3/7] mmc: tmio_mmc: don't use set_irq_type (v2) Philipp Zabel
2009-06-04 18:12 ` [PATCH 4/7] mmc: tmio_mmc: correct probe return value for num_resources != 3 Philipp Zabel
2009-06-04 18:12 ` [PATCH 5/7] mmc: tmio_mmc: map SD control registers after enabling the MFD cell Philipp Zabel
2009-06-12 21:36 ` Ian molton
2009-06-04 18:12 ` [PATCH 6/7] mmc: tmio_mmc: fix SDCLK divider setting Philipp Zabel
2009-06-12 21:44 ` Ian Molton [this message]
2009-06-04 18:12 ` [PATCH 7/7] mmc: tmio_mmc: allow compilation for ASIC3 Philipp Zabel
2009-06-12 21:47 ` Ian molton
2009-06-12 22:38 ` pHilipp Zabel
2009-06-13 11:58 ` [PATCH 0/7] ASIC3 support for tmio_mmc Pierre Ossman
2009-06-13 18:42 ` Ian Molton
2009-06-13 19:32 ` Pierre Ossman
2009-06-13 19:57 ` Ian Molton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A32CC36.2070207@mnementh.co.uk \
--to=ian@mnementh.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=philipp.zabel@gmail.com \
--cc=pierre@ossman.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox