From: "H. Peter Anvin" <hpa@zytor.com>
To: "Dr. David Alan Gilbert" <linux@treblig.org>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.{28,30} Keyboard not working on oldish machine
Date: Sat, 13 Jun 2009 23:40:39 -0700 [thread overview]
Message-ID: <4A349B67.1070603@zytor.com> (raw)
In-Reply-To: <20090613230842.GA18347@gallifrey>
Dr. David Alan Gilbert wrote:
> Hi,
> I've got an old Pentium 90 machine that's been running a 2.4.x
> kernel for a long time, seems to work OK on a 2.6.18 kernel
> but doesn't seem to like anything newer.
>
> 2.6.30 no keyboard - but otherwise OK
> 2.6.28 no keyboard - but otherwise OK
> 2.6.26 reboots just after parsing ELF (maybe one more line)
> 2.6.25 reboots almost immediately
> 2.6.18 works OK
>
> The 2.6.18 and 26 are Debian kernels (etch and lenny), the
> rest are vanilla from git.
>
> So it looks like something got fixed between 26 and 28 that
> stops the early reboot.
>
> Attached is the .config from the 2.6.30 and a dmesg from that boot.
> /proc/interrupts shows 8 interrupts on interrupt 1 from the i8042
> but it doesn't go up if I type. I've tried a couple of different
> keyboards, so I don't think it's just a dislike for the keyboard.
>
> I can see a /sys entry for the i8042 - I just don't get any input.
>
> It has an ISA VGA card (Trident 1M) (I needed the PCI slots
> for another net card!).
>
> I compiled it on a 64bit Ubuntu machine.
>
> [ 0.000000] Linux version 2.6.302.6.30gort1 (dg@davros) (gcc version 4.4.0 (Ubuntu 4.4.0-5ubuntu1) ) #2 Sat Jun 13 18:18:17 BST 2009
It would be good to try an unmodified 2.6.30 kernel here...
> [ 0.000000] KERNEL supported cpus:
> [ 0.000000] Intel GenuineIntel
> [ 0.000000] AMD AuthenticAMD
> [ 0.000000] NSC Geode by NSC
> [ 0.000000] Cyrix CyrixInstead
> [ 0.000000] Centaur CentaurHauls
> [ 0.000000] Transmeta GenuineTMx86
> [ 0.000000] Transmeta TransmetaCPU
> [ 0.000000] UMC UMC UMC UMC
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-88: 0000000000000000 - 000000000009f000 (usable)
> [ 0.000000] BIOS-88: 0000000000100000 - 0000000004000000 (usable)
Is 64 MB correct for this machine?
> [ 3.147416] PNP: No PS/2 controller found. Probing ports directly.
> [ 3.174456] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 3.174961] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 3.186312] mice: PS/2 mouse device common for all mice
It does, correctly, identify the keyboard and mode port, so it's
somewhat odd that it doesn't get used...
-hpa
--
H. Peter Anvin, Intel Open Source Technology Center
I work for Intel. I don't speak on their behalf.
next prev parent reply other threads:[~2009-06-14 6:40 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-13 23:08 2.6.{28,30} Keyboard not working on oldish machine Dr. David Alan Gilbert
2009-06-13 22:54 ` Ozan Çağlayan
2009-06-14 17:49 ` Dr. David Alan Gilbert
2009-06-14 6:27 ` Pekka Enberg
2009-06-14 6:40 ` H. Peter Anvin [this message]
2009-06-14 12:27 ` Dr. David Alan Gilbert
2009-06-16 9:27 ` Jiri Kosina
2009-06-17 19:34 ` Dr. David Alan Gilbert
2009-06-17 20:40 ` H. Peter Anvin
2009-06-17 23:28 ` Jiri Kosina
2009-06-20 12:03 ` Dr. David Alan Gilbert
2009-06-22 9:29 ` Jiri Kosina
2009-06-22 19:46 ` Dr. David Alan Gilbert
2009-06-23 8:42 ` Jiri Kosina
2009-06-23 18:58 ` Dr. David Alan Gilbert
2009-06-23 18:06 ` Dmitry Torokhov
2009-06-28 14:04 ` Dr. David Alan Gilbert
2009-06-29 9:06 ` Jiri Kosina
2009-07-04 1:24 ` Dr. David Alan Gilbert
2009-09-04 5:18 ` Dmitry Torokhov
2009-09-05 23:51 ` Dr. David Alan Gilbert
2009-09-08 6:12 ` Dmitry Torokhov
2009-09-09 1:53 ` Dmitry Torokhov
2009-09-12 15:00 ` Dr. David Alan Gilbert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A349B67.1070603@zytor.com \
--to=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@treblig.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox