[PATCH 0/5] at91: Introduction of at91sam9g10 SOC

[PATCH 0/5] at91: Introduction of at91sam9g10 SOC

[Nicolas Ferre]

AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

This patchset is relying on the integration of at91sam9g45 already posted. Here
is the patch series that you will have to take into account before applying
those patches.

clock.c changes:
http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=5438/1

9g45 introduction:
http://lkml.org/lkml/2009/6/4/77
http://lkml.org/lkml/2009/6/4/76
http://lkml.org/lkml/2009/6/4/78

---
 arch/arm/mach-at91/Kconfig                    |   25 +++++++++++++-
 arch/arm/mach-at91/Makefile                   |    2 +
 arch/arm/mach-at91/at91sam9261.c              |   22 ++++++++++++-
 arch/arm/mach-at91/board-sam9261ek.c          |   14 ++++++++
 arch/arm/mach-at91/clock.c                    |    6 ++-
 arch/arm/mach-at91/include/mach/at91sam9261.h |    3 ++
 arch/arm/mach-at91/include/mach/cpu.h         |    7 ++++
 arch/arm/mach-at91/include/mach/hardware.h    |    2 +-
 arch/arm/mach-at91/include/mach/timex.h       |    5 +++
 arch/arm/mach-at91/pm.c                       |    3 +-
 drivers/usb/gadget/at91_udc.c                 |    6 ++--
 drivers/usb/host/ohci-at91.c                  |   10 +++---
 drivers/video/Kconfig                         |    4 +-
 drivers/video/atmel_lcdfb.c                   |    6 ++-
 drivers/video/backlight/Kconfig               |    2 +-
 15 files changed, 97 insertions(+), 20 deletions(-)

[PATCH 1/5] at91: Basic support for at91sam9g10: header files

[Nicolas Ferre]

From: Hong Xu <hong.xu@atmel.com>

AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
faster clock speed: 266/133MHz.

Here is the basic header file support for this product.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/include/mach/at91sam9261.h |    3 +++
 arch/arm/mach-at91/include/mach/cpu.h         |    7 +++++++
 arch/arm/mach-at91/include/mach/hardware.h    |    2 +-
 arch/arm/mach-at91/include/mach/timex.h       |    5 +++++
 4 files changed, 16 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 3a348ca..87de8be 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -95,6 +95,9 @@
 #define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
 #define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
 
+#define AT91SAM9G10_SRAM_BASE	AT91SAM9261_SRAM_BASE	/* Internal SRAM base address */
+#define AT91SAM9G10_SRAM_SIZE	0x00004000	/* Internal SRAM size (16Kb) */
+
 #define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
 #define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
 
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index b73e7bf..34a9502 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -21,6 +21,7 @@
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
+#define ARCH_ID_AT91SAM9G10	0x819903a0
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
@@ -97,6 +98,12 @@ static inline unsigned long at91cap9_rev_identify(void)
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9G10
+#define cpu_is_at91sam9g10()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G10)
+#else
+#define cpu_is_at91sam9g10()	(0)
+#endif
+
 #ifdef CONFIG_ARCH_AT91SAM9263
 #define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
 #else
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index f086917..a0df8b0 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -20,7 +20,7 @@
 #include <mach/at91rm9200.h>
 #elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)
 #include <mach/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
+#elif defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)
 #include <mach/at91sam9261.h>
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 #include <mach/at91sam9263.h>
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 38f6c42..31ac2d9 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -42,6 +42,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9G10)
+
+#define AT91SAM9_MASTER_CLOCK	133000000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #elif defined(CONFIG_ARCH_AT91SAM9263)
 
 #if defined(CONFIG_MACH_USB_A9263)
-- 
1.5.3.7

[PATCH 2/5] at91: Support for at91sam9g10: clocks management

[Nicolas Ferre]

From: Hong Xu <hong.xu@atmel.com>

Add the at91sam9g10 support to the AT91 generic clock file. It takes
advantage of the management by functionalities of those PLLs and clocks.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/clock.c |    6 ++++--
 1 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index 6396680..c042dcf 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -53,7 +53,7 @@
 #define cpu_has_800M_plla()	(  cpu_is_at91sam9g20() \
 				|| cpu_is_at91sam9g45())
 
-#define cpu_has_300M_plla()	(0)
+#define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45()))
@@ -626,7 +626,9 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
 		uhpck.pmc_mask = AT91RM9200_PMC_UHP;
 		udpck.pmc_mask = AT91RM9200_PMC_UDP;
 		at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
+		   cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
+		   cpu_is_at91sam9g10()) {
 		uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
 		udpck.pmc_mask = AT91SAM926x_PMC_UDP;
 	} else if (cpu_is_at91cap9()) {
-- 
1.5.3.7

[PATCH 3/5] at91: Support for at91sam9g10: core chip & board support

[Nicolas Ferre]

From: Hong Xu <hong.xu@atmel.com>

Here are the modification to at91sam9261 files dedicated to the support of
at91sam9g10. This direction has been adopted to minimize code duplication.

All at91sam9261 drivers are enabled in _devices and board- files. Modificaton
to peripherals that support at91sam9g10 will be added in future patches.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 arch/arm/mach-at91/Kconfig           |   25 +++++++++++++++++++++++--
 arch/arm/mach-at91/Makefile          |    2 ++
 arch/arm/mach-at91/at91sam9261.c     |   22 +++++++++++++++++++++-
 arch/arm/mach-at91/board-sam9261ek.c |   14 ++++++++++++++
 arch/arm/mach-at91/pm.c              |    3 ++-
 5 files changed, 62 insertions(+), 4 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 22309ba..8f3e15a 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
@@ -230,6 +236,21 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9G10
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91SAM9263
 
 comment "AT91SAM9263 Board Type"
@@ -337,13 +358,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 2975f9a..4eaf80a 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
@@ -44,6 +45,7 @@ obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index 3acd7d7..4ecf379 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -16,6 +16,7 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <mach/cpu.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	},
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
 		.length		= AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 	},
 };
 
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+	{
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+		.length		= AT91SAM9G10_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 	/* Map peripherals */
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
 
+	if (cpu_is_at91sam9g10())
+		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+	else
+		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
 	at91_arch_reset = at91sam9261_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index d5266da..f9b1999 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 	.shortname	= "AT91SAM9261-EK external DAC",
+#else
+	.shortname	= "AT91SAM9G10-EK external DAC",
+#endif
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 
 #else
@@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 #endif
 
@@ -600,7 +610,11 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
 	/* Maintainer: Atmel */
 	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e26c4fe..4028724 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
 		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
-- 
1.5.3.7

Re: [PATCH 3/5] at91: Support for at91sam9g10: core chip & board support

[Jean-Christophe PLAGNIOL-VILLARD]

On 18:16 Thu 18 Jun     , Nicolas Ferre wrote:
> From: Hong Xu <hong.xu@atmel.com>
> 
> Here are the modification to at91sam9261 files dedicated to the support of
> at91sam9g10. This direction has been adopted to minimize code duplication.
> 
> All at91sam9261 drivers are enabled in _devices and board- files. Modificaton
> to peripherals that support at91sam9g10 will be added in future patches.
> 
> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>  arch/arm/mach-at91/Kconfig           |   25 +++++++++++++++++++++++--
>  arch/arm/mach-at91/Makefile          |    2 ++
>  arch/arm/mach-at91/at91sam9261.c     |   22 +++++++++++++++++++++-
>  arch/arm/mach-at91/board-sam9261ek.c |   14 ++++++++++++++
>  arch/arm/mach-at91/pm.c              |    3 ++-
>  5 files changed, 62 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 22309ba..8f3e15a 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
>  	select GENERIC_TIME
>  	select GENERIC_CLOCKEVENTS
>  
> +config ARCH_AT91SAM9G10
> +	bool "AT91SAM9G10"
> +	select CPU_ARM926T
> +	select GENERIC_TIME
> +	select GENERIC_CLOCKEVENTS
> +
>  config ARCH_AT91SAM9263
>  	bool "AT91SAM9263"
>  	select CPU_ARM926T
> @@ -230,6 +236,21 @@ endif
>  
>  # ----------------------------------------------------------
>  
> +if ARCH_AT91SAM9G10
> +
> +comment "AT91SAM9G10 Board Type"
> +
> +config MACH_AT91SAM9G10EK
> +	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
> +	depends on ARCH_AT91SAM9G10
> +	help
> +	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
> +	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
> +
> +endif
> +
> +# ----------------------------------------------------------
> +
>  if ARCH_AT91SAM9263
>  
>  comment "AT91SAM9263 Board Type"
> @@ -337,13 +358,13 @@ comment "AT91 Board Options"
>  
>  config MTD_AT91_DATAFLASH_CARD
>  	bool "Enable DataFlash Card support"
> -	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
> +	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
	can we reduce it and do as the propostion for the FB and create a new
	config and then select it at the board?
>  	help
>  	  Enable support for the DataFlash card.
>  
>  config MTD_NAND_ATMEL_BUSWIDTH_16
>  	bool "Enable 16-bit data bus interface to NAND flash"
> -	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
> +	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
ditto
>  	help
>  	  On AT91SAM926x boards both types of NAND flash can be present
>  	  (8 and 16 bit data bus width).
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 2975f9a..4eaf80a 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
>  obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
>  obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
>  obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
> +obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
>  obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
>  obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
>  obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
> @@ -44,6 +45,7 @@ obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
>  
>  # AT91SAM9261 board-specific support
>  obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
> +obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
>  
>  # AT91SAM9263 board-specific support
>  obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
> diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
> index 3acd7d7..4ecf379 100644
> --- a/arch/arm/mach-at91/at91sam9261.c
> +++ b/arch/arm/mach-at91/at91sam9261.c
> @@ -16,6 +16,7 @@
>  #include <asm/irq.h>
>  #include <asm/mach/arch.h>
>  #include <asm/mach/map.h>
> +#include <mach/cpu.h>
>  #include <mach/at91sam9261.h>
>  #include <mach/at91_pmc.h>
>  #include <mach/at91_rstc.h>
> @@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
>  		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
>  		.length		= SZ_16K,
>  		.type		= MT_DEVICE,
> -	}, {
> +	},
> +};
> +
> +static struct map_desc at91sam9261_sram_desc[] __initdata = {
> +	{
>  		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
>  		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
>  		.length		= AT91SAM9261_SRAM_SIZE,
> @@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
>  	},
>  };
>  
> +static struct map_desc at91sam9g10_sram_desc[] __initdata = {
> +	{
> +		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
> +		.pfn		= __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
> +		.length		= AT91SAM9G10_SRAM_SIZE,
> +		.type		= MT_DEVICE,
> +	},
> +};
> +
>  /* --------------------------------------------------------------------
>   *  Clocks
>   * -------------------------------------------------------------------- */
> @@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
>  	/* Map peripherals */
>  	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
>  
> +	if (cpu_is_at91sam9g10())
> +		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
> +	else
> +		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
> +
> +
>  	at91_arch_reset = at91sam9261_reset;
>  	pm_power_off = at91sam9261_poweroff;
>  	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
> diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
> index d5266da..f9b1999 100644
> --- a/arch/arm/mach-at91/board-sam9261ek.c
> +++ b/arch/arm/mach-at91/board-sam9261ek.c
> @@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
>   */
>  static struct at73c213_board_info at73c213_data = {
>  	.ssc_id		= 1,
> +#if defined(CONFIG_MACH_AT91SAM9261EK)
>  	.shortname	= "AT91SAM9261-EK external DAC",
> +#else
> +	.shortname	= "AT91SAM9G10-EK external DAC",
> +#endif
>  };
>  
>  #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
> @@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
>  	.default_monspecs		= &at91fb_default_stn_monspecs,
>  	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
>  	.guard_time			= 1,
> +#if defined(CONFIG_MACH_AT91SAM9G10EK)
> +	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
> +#endif
>  };
>  
>  #else
> @@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
>  	.default_monspecs		= &at91fb_default_tft_monspecs,
>  	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
>  	.guard_time			= 1,
> +#if defined(CONFIG_MACH_AT91SAM9G10EK)
> +	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
> +#endif
>  };
>  #endif
>  
> @@ -600,7 +610,11 @@ static void __init ek_board_init(void)
>  	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
>  }
>  
> +#if defined(CONFIG_MACH_AT91SAM9261EK)
>  MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
> +#else
> +MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
> +#endif
>  	/* Maintainer: Atmel */
>  	.phys_io	= AT91_BASE_SYS,
>  	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
> diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
> index e26c4fe..4028724 100644
> --- a/arch/arm/mach-at91/pm.c
> +++ b/arch/arm/mach-at91/pm.c
> @@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
>  			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
>  			return 0;
>  		}
> -	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
> +	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
> +			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
instead add more and more cpu_is why not cpu_has_pmc_uhp() ?

Best Regards,
J.

[PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10

[Nicolas Ferre]

From: Hong Xu <hong.xu@atmel.com>

Modify both host and gadget USB drivers for at91sam9g10.
This add a clock management equivalent to at91sam9261 on usb drivers.
It also add the way of handling gadget pull-ups (like the at91sam9261).

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 drivers/usb/gadget/at91_udc.c |    6 +++---
 drivers/usb/host/ohci-at91.c  |   10 +++++-----
 2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 0b2bb8f..bfed3d9 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -892,7 +892,7 @@ static void pullup(struct at91_udc *udc, int is_on)
 
 			txvc |= AT91_UDP_TXVC_PUON;
 			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-		} else if (cpu_is_at91sam9261()) {
+		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
 			u32	usbpucr;
 
 			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
@@ -910,7 +910,7 @@ static void pullup(struct at91_udc *udc, int is_on)
 
 			txvc &= ~AT91_UDP_TXVC_PUON;
 			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
-		} else if (cpu_is_at91sam9261()) {
+		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
 			u32	usbpucr;
 
 			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
@@ -1692,7 +1692,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
 		udc->ep[3].maxpacket = 64;
 		udc->ep[4].maxpacket = 512;
 		udc->ep[5].maxpacket = 512;
-	} else if (cpu_is_at91sam9261()) {
+	} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
 		udc->ep[3].maxpacket = 64;
 	} else if (cpu_is_at91sam9263()) {
 		udc->ep[0].maxpacket = 64;
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index b29b0fe..fb64def 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -35,7 +35,7 @@ extern int usb_disabled(void);
 
 static void at91_start_clock(void)
 {
-	if (cpu_is_at91sam9261())
+	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 		clk_enable(hclk);
 	clk_enable(iclk);
 	clk_enable(fclk);
@@ -46,7 +46,7 @@ static void at91_stop_clock(void)
 {
 	clk_disable(fclk);
 	clk_disable(iclk);
-	if (cpu_is_at91sam9261())
+	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 		clk_disable(hclk);
 	clocked = 0;
 }
@@ -142,7 +142,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
 	fclk = clk_get(&pdev->dev, "uhpck");
-	if (cpu_is_at91sam9261())
+	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 		hclk = clk_get(&pdev->dev, "hck0");
 
 	at91_start_hc(pdev);
@@ -156,7 +156,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	/* Error handling */
 	at91_stop_hc(pdev);
 
-	if (cpu_is_at91sam9261())
+	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 		clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
@@ -193,7 +193,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 
-	if (cpu_is_at91sam9261())
+	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
 		clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
-- 
1.5.3.7

Re: [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10

[Nicolas Ferre]

Hi,

Here is a little "ping" about integration of this patch.

Nicolas Ferre :
> From: Hong Xu <hong.xu@atmel.com>
> 
> Modify both host and gadget USB drivers for at91sam9g10.
> This add a clock management equivalent to at91sam9261 on usb drivers.
> It also add the way of handling gadget pull-ups (like the at91sam9261).

I wonder if we can consider its inclusion as at91sam9g10 is now
integrated in mainline.
Do you want me to split this in several pieces for host/gadget split.

Thanks.

> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>  drivers/usb/gadget/at91_udc.c |    6 +++---
>  drivers/usb/host/ohci-at91.c  |   10 +++++-----
>  2 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
> index 0b2bb8f..bfed3d9 100644
> --- a/drivers/usb/gadget/at91_udc.c
> +++ b/drivers/usb/gadget/at91_udc.c
> @@ -892,7 +892,7 @@ static void pullup(struct at91_udc *udc, int is_on)
>  
>  			txvc |= AT91_UDP_TXVC_PUON;
>  			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
> -		} else if (cpu_is_at91sam9261()) {
> +		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>  			u32	usbpucr;
>  
>  			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
> @@ -910,7 +910,7 @@ static void pullup(struct at91_udc *udc, int is_on)
>  
>  			txvc &= ~AT91_UDP_TXVC_PUON;
>  			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
> -		} else if (cpu_is_at91sam9261()) {
> +		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>  			u32	usbpucr;
>  
>  			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
> @@ -1692,7 +1692,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
>  		udc->ep[3].maxpacket = 64;
>  		udc->ep[4].maxpacket = 512;
>  		udc->ep[5].maxpacket = 512;
> -	} else if (cpu_is_at91sam9261()) {
> +	} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>  		udc->ep[3].maxpacket = 64;
>  	} else if (cpu_is_at91sam9263()) {
>  		udc->ep[0].maxpacket = 64;
> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> index b29b0fe..fb64def 100644
> --- a/drivers/usb/host/ohci-at91.c
> +++ b/drivers/usb/host/ohci-at91.c
> @@ -35,7 +35,7 @@ extern int usb_disabled(void);
>  
>  static void at91_start_clock(void)
>  {
> -	if (cpu_is_at91sam9261())
> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>  		clk_enable(hclk);
>  	clk_enable(iclk);
>  	clk_enable(fclk);
> @@ -46,7 +46,7 @@ static void at91_stop_clock(void)
>  {
>  	clk_disable(fclk);
>  	clk_disable(iclk);
> -	if (cpu_is_at91sam9261())
> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>  		clk_disable(hclk);
>  	clocked = 0;
>  }
> @@ -142,7 +142,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>  
>  	iclk = clk_get(&pdev->dev, "ohci_clk");
>  	fclk = clk_get(&pdev->dev, "uhpck");
> -	if (cpu_is_at91sam9261())
> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>  		hclk = clk_get(&pdev->dev, "hck0");
>  
>  	at91_start_hc(pdev);
> @@ -156,7 +156,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>  	/* Error handling */
>  	at91_stop_hc(pdev);
>  
> -	if (cpu_is_at91sam9261())
> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>  		clk_put(hclk);
>  	clk_put(fclk);
>  	clk_put(iclk);
> @@ -193,7 +193,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
>  	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
>  	usb_put_hcd(hcd);
>  
> -	if (cpu_is_at91sam9261())
> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>  		clk_put(hclk);
>  	clk_put(fclk);
>  	clk_put(iclk);


-- 
Nicolas Ferre

Re: [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10

[Nicolas Ferre]

Greg,

Please, can you consider the inclusion of this patch. I have no news
about it for a long time...

Here is a link to its patchwork entry:
http://patchwork.kernel.org/patch/31173/

Thanks for your help.

Nicolas Ferre :
> Hi,
> 
> Here is a little "ping" about integration of this patch.
> 
> Nicolas Ferre :
>> From: Hong Xu <hong.xu@atmel.com>
>>
>> Modify both host and gadget USB drivers for at91sam9g10.
>> This add a clock management equivalent to at91sam9261 on usb drivers.
>> It also add the way of handling gadget pull-ups (like the at91sam9261).
> 
> I wonder if we can consider its inclusion as at91sam9g10 is now
> integrated in mainline.
> Do you want me to split this in several pieces for host/gadget split.
> 
> Thanks.
> 
>> Signed-off-by: Hong Xu <hong.xu@atmel.com>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>>  drivers/usb/gadget/at91_udc.c |    6 +++---
>>  drivers/usb/host/ohci-at91.c  |   10 +++++-----
>>  2 files changed, 8 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
>> index 0b2bb8f..bfed3d9 100644
>> --- a/drivers/usb/gadget/at91_udc.c
>> +++ b/drivers/usb/gadget/at91_udc.c
>> @@ -892,7 +892,7 @@ static void pullup(struct at91_udc *udc, int is_on)
>>  
>>  			txvc |= AT91_UDP_TXVC_PUON;
>>  			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
>> -		} else if (cpu_is_at91sam9261()) {
>> +		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>>  			u32	usbpucr;
>>  
>>  			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
>> @@ -910,7 +910,7 @@ static void pullup(struct at91_udc *udc, int is_on)
>>  
>>  			txvc &= ~AT91_UDP_TXVC_PUON;
>>  			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
>> -		} else if (cpu_is_at91sam9261()) {
>> +		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>>  			u32	usbpucr;
>>  
>>  			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
>> @@ -1692,7 +1692,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
>>  		udc->ep[3].maxpacket = 64;
>>  		udc->ep[4].maxpacket = 512;
>>  		udc->ep[5].maxpacket = 512;
>> -	} else if (cpu_is_at91sam9261()) {
>> +	} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>>  		udc->ep[3].maxpacket = 64;
>>  	} else if (cpu_is_at91sam9263()) {
>>  		udc->ep[0].maxpacket = 64;
>> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
>> index b29b0fe..fb64def 100644
>> --- a/drivers/usb/host/ohci-at91.c
>> +++ b/drivers/usb/host/ohci-at91.c
>> @@ -35,7 +35,7 @@ extern int usb_disabled(void);
>>  
>>  static void at91_start_clock(void)
>>  {
>> -	if (cpu_is_at91sam9261())
>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>  		clk_enable(hclk);
>>  	clk_enable(iclk);
>>  	clk_enable(fclk);
>> @@ -46,7 +46,7 @@ static void at91_stop_clock(void)
>>  {
>>  	clk_disable(fclk);
>>  	clk_disable(iclk);
>> -	if (cpu_is_at91sam9261())
>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>  		clk_disable(hclk);
>>  	clocked = 0;
>>  }
>> @@ -142,7 +142,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>>  
>>  	iclk = clk_get(&pdev->dev, "ohci_clk");
>>  	fclk = clk_get(&pdev->dev, "uhpck");
>> -	if (cpu_is_at91sam9261())
>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>  		hclk = clk_get(&pdev->dev, "hck0");
>>  
>>  	at91_start_hc(pdev);
>> @@ -156,7 +156,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>>  	/* Error handling */
>>  	at91_stop_hc(pdev);
>>  
>> -	if (cpu_is_at91sam9261())
>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>  		clk_put(hclk);
>>  	clk_put(fclk);
>>  	clk_put(iclk);
>> @@ -193,7 +193,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
>>  	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
>>  	usb_put_hcd(hcd);
>>  
>> -	if (cpu_is_at91sam9261())
>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>  		clk_put(hclk);
>>  	clk_put(fclk);
>>  	clk_put(iclk);
> 
> 


-- 
Nicolas Ferre

Re: [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10

[David Brownell]

On Friday 25 September 2009, Nicolas Ferre wrote:
> Greg,
> 
> Please, can you consider the inclusion of this patch. I have no news
> about it for a long time...

ISTR either acking this or suggesting it go with the rest
of the G10 patches ... regardless, seems OK to me now that
its precursors have merged.


> Here is a link to its patchwork entry:
> http://patchwork.kernel.org/patch/31173/
> 
> Thanks for your help.
> 
> Nicolas Ferre :
> > Hi,
> > 
> > Here is a little "ping" about integration of this patch.
> > 
> > Nicolas Ferre :
> >> From: Hong Xu <hong.xu@atmel.com>
> >>
> >> Modify both host and gadget USB drivers for at91sam9g10.
> >> This add a clock management equivalent to at91sam9261 on usb drivers.
> >> It also add the way of handling gadget pull-ups (like the at91sam9261).
> > 
> > I wonder if we can consider its inclusion as at91sam9g10 is now
> > integrated in mainline.
> > Do you want me to split this in several pieces for host/gadget split.
> > 
> > Thanks.
> > 
> >> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> >> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> >> ---
> >>  drivers/usb/gadget/at91_udc.c |    6 +++---
> >>  drivers/usb/host/ohci-at91.c  |   10 +++++-----
> >>  2 files changed, 8 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
> >> index 0b2bb8f..bfed3d9 100644
> >> --- a/drivers/usb/gadget/at91_udc.c
> >> +++ b/drivers/usb/gadget/at91_udc.c
> >> @@ -892,7 +892,7 @@ static void pullup(struct at91_udc *udc, int is_on)
> >>  
> >>  			txvc |= AT91_UDP_TXVC_PUON;
> >>  			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
> >> -		} else if (cpu_is_at91sam9261()) {
> >> +		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
> >>  			u32	usbpucr;
> >>  
> >>  			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
> >> @@ -910,7 +910,7 @@ static void pullup(struct at91_udc *udc, int is_on)
> >>  
> >>  			txvc &= ~AT91_UDP_TXVC_PUON;
> >>  			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
> >> -		} else if (cpu_is_at91sam9261()) {
> >> +		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
> >>  			u32	usbpucr;
> >>  
> >>  			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
> >> @@ -1692,7 +1692,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
> >>  		udc->ep[3].maxpacket = 64;
> >>  		udc->ep[4].maxpacket = 512;
> >>  		udc->ep[5].maxpacket = 512;
> >> -	} else if (cpu_is_at91sam9261()) {
> >> +	} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
> >>  		udc->ep[3].maxpacket = 64;
> >>  	} else if (cpu_is_at91sam9263()) {
> >>  		udc->ep[0].maxpacket = 64;
> >> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
> >> index b29b0fe..fb64def 100644
> >> --- a/drivers/usb/host/ohci-at91.c
> >> +++ b/drivers/usb/host/ohci-at91.c
> >> @@ -35,7 +35,7 @@ extern int usb_disabled(void);
> >>  
> >>  static void at91_start_clock(void)
> >>  {
> >> -	if (cpu_is_at91sam9261())
> >> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
> >>  		clk_enable(hclk);
> >>  	clk_enable(iclk);
> >>  	clk_enable(fclk);
> >> @@ -46,7 +46,7 @@ static void at91_stop_clock(void)
> >>  {
> >>  	clk_disable(fclk);
> >>  	clk_disable(iclk);
> >> -	if (cpu_is_at91sam9261())
> >> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
> >>  		clk_disable(hclk);
> >>  	clocked = 0;
> >>  }
> >> @@ -142,7 +142,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
> >>  
> >>  	iclk = clk_get(&pdev->dev, "ohci_clk");
> >>  	fclk = clk_get(&pdev->dev, "uhpck");
> >> -	if (cpu_is_at91sam9261())
> >> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
> >>  		hclk = clk_get(&pdev->dev, "hck0");
> >>  
> >>  	at91_start_hc(pdev);
> >> @@ -156,7 +156,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
> >>  	/* Error handling */
> >>  	at91_stop_hc(pdev);
> >>  
> >> -	if (cpu_is_at91sam9261())
> >> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
> >>  		clk_put(hclk);
> >>  	clk_put(fclk);
> >>  	clk_put(iclk);
> >> @@ -193,7 +193,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
> >>  	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
> >>  	usb_put_hcd(hcd);
> >>  
> >> -	if (cpu_is_at91sam9261())
> >> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
> >>  		clk_put(hclk);
> >>  	clk_put(fclk);
> >>  	clk_put(iclk);
> > 
> > 
> 
> 
> -- 
> Nicolas Ferre
> 
> 

Re: [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10

[Nicolas Ferre]

David Brownell :
> On Friday 25 September 2009, Nicolas Ferre wrote:
>> Greg,
>>
>> Please, can you consider the inclusion of this patch. I have no news
>> about it for a long time...
> 
> ISTR either acking this or suggesting it go with the rest
> of the G10 patches ... regardless, seems OK to me now that
> its precursors have merged.

Good.

Greg, can you handle this for inclusion in mainline soon ?

Thanks, Bye.

>> Here is a link to its patchwork entry:
>> http://patchwork.kernel.org/patch/31173/
>>
>> Thanks for your help.
>>
>> Nicolas Ferre :
>>> Hi,
>>>
>>> Here is a little "ping" about integration of this patch.
>>>
>>> Nicolas Ferre :
>>>> From: Hong Xu <hong.xu@atmel.com>
>>>>
>>>> Modify both host and gadget USB drivers for at91sam9g10.
>>>> This add a clock management equivalent to at91sam9261 on usb drivers.
>>>> It also add the way of handling gadget pull-ups (like the at91sam9261).
>>> I wonder if we can consider its inclusion as at91sam9g10 is now
>>> integrated in mainline.
>>> Do you want me to split this in several pieces for host/gadget split.
>>>
>>> Thanks.
>>>
>>>> Signed-off-by: Hong Xu <hong.xu@atmel.com>
>>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>>>> ---
>>>>  drivers/usb/gadget/at91_udc.c |    6 +++---
>>>>  drivers/usb/host/ohci-at91.c  |   10 +++++-----
>>>>  2 files changed, 8 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
>>>> index 0b2bb8f..bfed3d9 100644
>>>> --- a/drivers/usb/gadget/at91_udc.c
>>>> +++ b/drivers/usb/gadget/at91_udc.c
>>>> @@ -892,7 +892,7 @@ static void pullup(struct at91_udc *udc, int is_on)
>>>>  
>>>>  			txvc |= AT91_UDP_TXVC_PUON;
>>>>  			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
>>>> -		} else if (cpu_is_at91sam9261()) {
>>>> +		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>>>>  			u32	usbpucr;
>>>>  
>>>>  			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
>>>> @@ -910,7 +910,7 @@ static void pullup(struct at91_udc *udc, int is_on)
>>>>  
>>>>  			txvc &= ~AT91_UDP_TXVC_PUON;
>>>>  			at91_udp_write(udc, AT91_UDP_TXVC, txvc);
>>>> -		} else if (cpu_is_at91sam9261()) {
>>>> +		} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>>>>  			u32	usbpucr;
>>>>  
>>>>  			usbpucr = at91_sys_read(AT91_MATRIX_USBPUCR);
>>>> @@ -1692,7 +1692,7 @@ static int __init at91udc_probe(struct platform_device *pdev)
>>>>  		udc->ep[3].maxpacket = 64;
>>>>  		udc->ep[4].maxpacket = 512;
>>>>  		udc->ep[5].maxpacket = 512;
>>>> -	} else if (cpu_is_at91sam9261()) {
>>>> +	} else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) {
>>>>  		udc->ep[3].maxpacket = 64;
>>>>  	} else if (cpu_is_at91sam9263()) {
>>>>  		udc->ep[0].maxpacket = 64;
>>>> diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
>>>> index b29b0fe..fb64def 100644
>>>> --- a/drivers/usb/host/ohci-at91.c
>>>> +++ b/drivers/usb/host/ohci-at91.c
>>>> @@ -35,7 +35,7 @@ extern int usb_disabled(void);
>>>>  
>>>>  static void at91_start_clock(void)
>>>>  {
>>>> -	if (cpu_is_at91sam9261())
>>>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>>>  		clk_enable(hclk);
>>>>  	clk_enable(iclk);
>>>>  	clk_enable(fclk);
>>>> @@ -46,7 +46,7 @@ static void at91_stop_clock(void)
>>>>  {
>>>>  	clk_disable(fclk);
>>>>  	clk_disable(iclk);
>>>> -	if (cpu_is_at91sam9261())
>>>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>>>  		clk_disable(hclk);
>>>>  	clocked = 0;
>>>>  }
>>>> @@ -142,7 +142,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>>>>  
>>>>  	iclk = clk_get(&pdev->dev, "ohci_clk");
>>>>  	fclk = clk_get(&pdev->dev, "uhpck");
>>>> -	if (cpu_is_at91sam9261())
>>>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>>>  		hclk = clk_get(&pdev->dev, "hck0");
>>>>  
>>>>  	at91_start_hc(pdev);
>>>> @@ -156,7 +156,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
>>>>  	/* Error handling */
>>>>  	at91_stop_hc(pdev);
>>>>  
>>>> -	if (cpu_is_at91sam9261())
>>>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>>>  		clk_put(hclk);
>>>>  	clk_put(fclk);
>>>>  	clk_put(iclk);
>>>> @@ -193,7 +193,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
>>>>  	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
>>>>  	usb_put_hcd(hcd);
>>>>  
>>>> -	if (cpu_is_at91sam9261())
>>>> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
>>>>  		clk_put(hclk);
>>>>  	clk_put(fclk);
>>>>  	clk_put(iclk);



-- 
Nicolas Ferre

Re: [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10

[Greg KH]

On Tue, Sep 29, 2009 at 09:59:36AM +0200, Nicolas Ferre wrote:
> David Brownell :
> > On Friday 25 September 2009, Nicolas Ferre wrote:
> >> Greg,
> >>
> >> Please, can you consider the inclusion of this patch. I have no news
> >> about it for a long time...
> > 
> > ISTR either acking this or suggesting it go with the rest
> > of the G10 patches ... regardless, seems OK to me now that
> > its precursors have merged.
> 
> Good.
> 
> Greg, can you handle this for inclusion in mainline soon ?

I'll dig it out and work on this after the x.org conference this week...

thanks,

greg k-h

Re: [PATCH 4/5] at91/USB: USB drivers modifications for at91sam9g10

[Nicolas Ferre]

Greg KH :
> On Tue, Sep 29, 2009 at 09:59:36AM +0200, Nicolas Ferre wrote:
>> David Brownell :
>>> On Friday 25 September 2009, Nicolas Ferre wrote:
>>>> Greg,
>>>>
>>>> Please, can you consider the inclusion of this patch. I have no news
>>>> about it for a long time...
>>> ISTR either acking this or suggesting it go with the rest
>>> of the G10 patches ... regardless, seems OK to me now that
>>> its precursors have merged.
>> Good.
>>
>> Greg, can you handle this for inclusion in mainline soon ?
> 
> I'll dig it out and work on this after the x.org conference this week...

Ping ?

Thanks, Bye,
-- 
Nicolas Ferre

[PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver

[Nicolas Ferre]

From: Hong Xu <hong.xu@atmel.com>

Modify atmel LCD driver: atmel_lcdfb for at91sam9g10.  This add a clock
management equivalent to at91sam9261.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
 drivers/video/Kconfig           |    4 ++--
 drivers/video/atmel_lcdfb.c     |    6 ++++--
 drivers/video/backlight/Kconfig |    2 +-
 3 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 5152168..2dbede4 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -933,7 +933,7 @@ config FB_S1D13XXX
 
 config FB_ATMEL
 	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
+	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -949,7 +949,7 @@ config FB_INTSRAM
 
 config FB_ATMEL_STN
 	bool "Use a STN display with AT91/AT32 LCD Controller"
-	depends on FB_ATMEL && MACH_AT91SAM9261EK
+	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
 	default n
 	help
 	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 9a577a8..fc10ac5 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -188,7 +188,8 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
 {
 	unsigned long value;
 
-	if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
+	if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
+		|| cpu_is_at32ap7000()))
 		return xres;
 
 	value = xres;
@@ -827,7 +828,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
 	info->fix = atmel_lcdfb_fix;
 
 	/* Enable LCDC Clocks */
-	if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
+	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()
+	 || cpu_is_at32ap7000()) {
 		sinfo->bus_clk = clk_get(dev, "hck1");
 		if (IS_ERR(sinfo->bus_clk)) {
 			ret = PTR_ERR(sinfo->bus_clk);
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index f9d19be..90861cd 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -110,7 +110,7 @@ config BACKLIGHT_CLASS_DEVICE
 config BACKLIGHT_ATMEL_LCDC
 	bool "Atmel LCDC Contrast-as-Backlight control"
 	depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
-	default y if MACH_SAM9261EK || MACH_SAM9263EK
+	default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
 	help
 	  This provides a backlight control internal to the Atmel LCDC
 	  driver.  If the LCD "contrast control" on your board is wired
-- 
1.5.3.7

Re: [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver

[Jean-Christophe PLAGNIOL-VILLARD]

On 18:16 Thu 18 Jun     , Nicolas Ferre wrote:
> From: Hong Xu <hong.xu@atmel.com>
> 
> Modify atmel LCD driver: atmel_lcdfb for at91sam9g10.  This add a clock
> management equivalent to at91sam9261.
> 
> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> ---
>  drivers/video/Kconfig           |    4 ++--
>  drivers/video/atmel_lcdfb.c     |    6 ++++--
>  drivers/video/backlight/Kconfig |    2 +-
>  3 files changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 5152168..2dbede4 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -933,7 +933,7 @@ config FB_S1D13XXX
>  
>  config FB_ATMEL
>  	tristate "AT91/AT32 LCD Controller support"
> -	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
> +	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
create a ARCH_ATMEL_HAS_FB then select it at the soc will allow to reduce this || xx... by
	depends on FB && ARCH_ATMEL_HAS_FB

Best Regards,
J.

Re: [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver

[Nicolas Ferre]

Jean-Christophe PLAGNIOL-VILLARD :
> On 18:16 Thu 18 Jun     , Nicolas Ferre wrote:
>> From: Hong Xu <hong.xu@atmel.com>
>>
>> Modify atmel LCD driver: atmel_lcdfb for at91sam9g10.  This add a clock
>> management equivalent to at91sam9261.
>>
>> Signed-off-by: Hong Xu <hong.xu@atmel.com>
>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> ---
>>  drivers/video/Kconfig           |    4 ++--
>>  drivers/video/atmel_lcdfb.c     |    6 ++++--
>>  drivers/video/backlight/Kconfig |    2 +-
>>  3 files changed, 7 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
>> index 5152168..2dbede4 100644
>> --- a/drivers/video/Kconfig
>> +++ b/drivers/video/Kconfig
>> @@ -933,7 +933,7 @@ config FB_S1D13XXX
>>  
>>  config FB_ATMEL
>>  	tristate "AT91/AT32 LCD Controller support"
>> -	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
>> +	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
> create a ARCH_ATMEL_HAS_FB then select it at the soc will allow to reduce this || xx... by
> 	depends on FB && ARCH_ATMEL_HAS_FB

Maybe we can schedule such an update on top of this patch series.
Indeed, as it impacts also AVR32, I propose to build a patch with both
architecture update once at91sam9g45 and at91sam9g10 patchsets are queued.

A proposition follows.

Regards,
-- 
Nicolas Ferre

[RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line

[Nicolas Ferre]

Many Atmel SOC are embedding a LCD controller. This patch removes the long
dependency line for this Atmel LCD framebuffer driver configuration entry.
The ARCH_ATMEL_HAS_FB configuration option is located in the video Kconfig file
as it may be setup by ARM/AT91 and AVR32 chips.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
---
Beware, this proposition goes on top of at91sam9g45 & at91sam9g10 patchsets
already posted. My proposition is to wait for those series are queued before
applying this modification.

 arch/arm/mach-at91/Kconfig |    6 ++++++
 arch/avr32/Kconfig         |    1 +
 drivers/video/Kconfig      |    7 ++++++-
 3 files changed, 13 insertions(+), 1 deletions(-)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 8f3e15a..00c7e08 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -22,24 +22,28 @@ config ARCH_AT91SAM9261
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_ATMEL_HAS_FB
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_ATMEL_HAS_FB
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_ATMEL_HAS_FB
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_ATMEL_HAS_FB
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
@@ -52,12 +56,14 @@ config ARCH_AT91SAM9G45
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_ATMEL_HAS_FB
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_ATMEL_HAS_FB
 
 config ARCH_AT91X40
 	bool "AT91x40"
diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig
index 35e3bd9..43d4946 100644
--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -92,6 +92,7 @@ config PLATFORM_AT32AP
 	select PERFORMANCE_COUNTERS
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_ALLOCATOR
+	select ARCH_ATMEL_HAS_FB
 
 #
 # CPU types
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 2dbede4..a2cdf88 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -931,9 +931,14 @@ config FB_S1D13XXX
 	  working with S1D13806). Product specs at
 	  <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
 
+config ARCH_ATMEL_HAS_FB
+	bool
+	depends on FB
+	default n
+
 config FB_ATMEL
 	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
+	depends on FB && ARCH_ATMEL_HAS_FB
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-- 
1.5.3.7

Re: [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line

[Haavard Skinnemoen]

Nicolas Ferre wrote:
> +config ARCH_ATMEL_HAS_FB
> +	bool
> +	depends on FB
> +	default n

What happens when we unconditionally select something which depends on
something else?

Haavard

Re: [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line

[Nicolas Ferre]

Haavard Skinnemoen :
> Nicolas Ferre wrote:
>> +config ARCH_ATMEL_HAS_FB
>> +	bool
>> +	depends on FB
>> +	default n
> 
> What happens when we unconditionally select something which depends on
> something else?

:-P

Experience shows that this configuration is selected.

The dependency allows to have a good hierarchy in the configuration tree...
Better proposition welcome.

Bye,
-- 
Nicolas Ferre

Re: [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line

[Russell King - ARM Linux]

On Tue, Jun 23, 2009 at 04:12:54PM +0200, Nicolas Ferre wrote:
> Haavard Skinnemoen :
> > Nicolas Ferre wrote:
> >> +config ARCH_ATMEL_HAS_FB
> >> +	bool
> >> +	depends on FB
> >> +	default n
> > 
> > What happens when we unconditionally select something which depends on
> > something else?
> 
> :-P
> 
> Experience shows that this configuration is selected.
> 
> The dependency allows to have a good hierarchy in the configuration tree...
> Better proposition welcome.

1st - no need for 'default n' - you're specifying something that's already
the default.

2nd - don't make this symbol depend on anything, and don't use the symbol
for anything except providing a dependency for FB_ATMEL.  Instead, let
FB_ATMEL deal with the dependency on FB and ARCH_ATMEL_HAS_FB.

3rd - ISTR we have a convention for these - 'HAVE_foo' for a configuration
option named 'foo'.  So it should probably be HAVE_FB_ATMEL.

Re: [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line

[Nicolas Ferre]

I come back on this patch as I have a Kconfig cleanup patch series coming.

Russell King - ARM Linux :
> On Tue, Jun 23, 2009 at 04:12:54PM +0200, Nicolas Ferre wrote:
>> Haavard Skinnemoen :
>>> Nicolas Ferre wrote:
>>>> +config ARCH_ATMEL_HAS_FB
>>>> +	bool
>>>> +	depends on FB
>>>> +	default n
>>> What happens when we unconditionally select something which depends on
>>> something else?
>> :-P
>>
>> Experience shows that this configuration is selected.
>>
>> The dependency allows to have a good hierarchy in the configuration tree...
>> Better proposition welcome.
> 
> 1st - no need for 'default n' - you're specifying something that's already
> the default.

Ok.

> 2nd - don't make this symbol depend on anything, and don't use the symbol
> for anything except providing a dependency for FB_ATMEL.  Instead, let
> FB_ATMEL deal with the dependency on FB and ARCH_ATMEL_HAS_FB.

The problem is that if I do not setup the dependency here the menu entry
will not be available at the proper level. In fact I will see the Atmel
LCD entry here:
"Graphics support"
 <*> Support for frame buffer devices  --->
 <*> AT91/AT32 LCD Controller support

instead of here:
"Graphics support"
 ---> "Support for frame buffer devices"
      [..]
      <*> "AT91/AT32 LCD Controller support"
      [..]

So I keep the depend.

> 3rd - ISTR we have a convention for these - 'HAVE_foo' for a configuration
> option named 'foo'.  So it should probably be HAVE_FB_ATMEL.

Ok, changed to HAVE_FB_ATMEL indeed.

Thanks. Best regards,
-- 
Nicolas Ferre

Re: [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line

[Russell King - ARM Linux]

On Tue, Nov 03, 2009 at 03:42:16PM +0100, Nicolas Ferre wrote:
> The problem is that if I do not setup the dependency here the menu entry
> will not be available at the proper level. In fact I will see the Atmel
> LCD entry here:
> "Graphics support"
>  <*> Support for frame buffer devices  --->
>  <*> AT91/AT32 LCD Controller support
> 
> instead of here:
> "Graphics support"
>  ---> "Support for frame buffer devices"
>       [..]
>       <*> "AT91/AT32 LCD Controller support"
>       [..]
> 
> So I keep the depend.

The depend is on ARCH_ATMEL_HAS_FB which has no description (and therefore
does not appear in the menus) not the symbol for "AT91/AT32 LCD Controller
support".

Re: [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line

[Nicolas Ferre]

Russell King - ARM Linux :
> On Tue, Nov 03, 2009 at 03:42:16PM +0100, Nicolas Ferre wrote:
>> The problem is that if I do not setup the dependency here the menu entry
>> will not be available at the proper level. In fact I will see the Atmel
>> LCD entry here:
>> "Graphics support"
>>  <*> Support for frame buffer devices  --->
>>  <*> AT91/AT32 LCD Controller support
>>
>> instead of here:
>> "Graphics support"
>>  ---> "Support for frame buffer devices"
>>       [..]
>>       <*> "AT91/AT32 LCD Controller support"
>>       [..]
>>
>> So I keep the depend.
> 
> The depend is on ARCH_ATMEL_HAS_FB which has no description (and therefore
> does not appear in the menus) not the symbol for "AT91/AT32 LCD Controller
> support".

The issue with the menu was that the additional variable was in the middle 
of the list of frame buffer devices.

Here is a snippet of the solution I propose without the not needed depend. 
I cook a v2 patch just now.

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 9bbb285..6d3f291 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -5,6 +5,9 @@
 menu "Graphics support"
        depends on HAS_IOMEM
 
+config HAVE_FB_ATMEL
+       bool
+
 source "drivers/char/agp/Kconfig"
 
 source "drivers/gpu/vga/Kconfig"
@@ -937,7 +940,7 @@ config FB_S1D13XXX
 
 config FB_ATMEL
        tristate "AT91/AT32 LCD Controller support"
-       depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT9
+       depends on FB && HAVE_FB_ATMEL
        select FB_CFB_FILLRECT
        select FB_CFB_COPYAREA
        select FB_CFB_IMAGEBLIT

Best regards,
-- 
Nicolas Ferre

Re: [RFC PATCH] atmel_lcdfb Kconfig: remove long dependency line

[Jean-Christophe PLAGNIOL-VILLARD]

>  
> +config ARCH_ATMEL_HAS_FB
> +	bool
> +	depends on FB
as you use it just under with the FB condition too
I think you can avoid this depend here
> +	default n
> +
>  config FB_ATMEL
>  	tristate "AT91/AT32 LCD Controller support"
> -	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
> +	depends on FB && ARCH_ATMEL_HAS_FB
>  	select FB_CFB_FILLRECT
>  	select FB_CFB_COPYAREA
>  	select FB_CFB_IMAGEBLIT

Best Regards,
J.

Re: [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver

[Nicolas Ferre]

Hi,

Nicolas Ferre :
> From: Hong Xu <hong.xu@atmel.com>
> 
> Modify atmel LCD driver: atmel_lcdfb for at91sam9g10.  This add a clock
> management equivalent to at91sam9261.

Can we consider an inclusion in linux-fbdev ?

> Signed-off-by: Hong Xu <hong.xu@atmel.com>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Andrew Victor added his:
Acked-by: Andrew Victor <linux@maxim.org.za>

> ---
>  drivers/video/Kconfig           |    4 ++--
>  drivers/video/atmel_lcdfb.c     |    6 ++++--
>  drivers/video/backlight/Kconfig |    2 +-
>  3 files changed, 7 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 5152168..2dbede4 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -933,7 +933,7 @@ config FB_S1D13XXX
>  
>  config FB_ATMEL
>  	tristate "AT91/AT32 LCD Controller support"
> -	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
> +	depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9G10 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 || ARCH_AT91CAP9 || AVR32)
>  	select FB_CFB_FILLRECT
>  	select FB_CFB_COPYAREA
>  	select FB_CFB_IMAGEBLIT
> @@ -949,7 +949,7 @@ config FB_INTSRAM
>  
>  config FB_ATMEL_STN
>  	bool "Use a STN display with AT91/AT32 LCD Controller"
> -	depends on FB_ATMEL && MACH_AT91SAM9261EK
> +	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
>  	default n
>  	help
>  	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
> diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
> index 9a577a8..fc10ac5 100644
> --- a/drivers/video/atmel_lcdfb.c
> +++ b/drivers/video/atmel_lcdfb.c
> @@ -188,7 +188,8 @@ static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
>  {
>  	unsigned long value;
>  
> -	if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
> +	if (!(cpu_is_at91sam9261() || cpu_is_at91sam9g10()
> +		|| cpu_is_at32ap7000()))
>  		return xres;
>  
>  	value = xres;
> @@ -827,7 +828,8 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)
>  	info->fix = atmel_lcdfb_fix;
>  
>  	/* Enable LCDC Clocks */
> -	if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
> +	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()
> +	 || cpu_is_at32ap7000()) {
>  		sinfo->bus_clk = clk_get(dev, "hck1");
>  		if (IS_ERR(sinfo->bus_clk)) {
>  			ret = PTR_ERR(sinfo->bus_clk);
> diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
> index f9d19be..90861cd 100644
> --- a/drivers/video/backlight/Kconfig
> +++ b/drivers/video/backlight/Kconfig
> @@ -110,7 +110,7 @@ config BACKLIGHT_CLASS_DEVICE
>  config BACKLIGHT_ATMEL_LCDC
>  	bool "Atmel LCDC Contrast-as-Backlight control"
>  	depends on BACKLIGHT_CLASS_DEVICE && FB_ATMEL
> -	default y if MACH_SAM9261EK || MACH_SAM9263EK
> +	default y if MACH_SAM9261EK || MACH_SAM9G10EK || MACH_SAM9263EK
>  	help
>  	  This provides a backlight control internal to the Atmel LCDC
>  	  driver.  If the LCD "contrast control" on your board is wired


Best regards,
-- 
Nicolas Ferre

Re: [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver

[Andrew Morton]

On Mon, 06 Jul 2009 12:32:53 +0200
Nicolas Ferre <nicolas.ferre@atmel.com> wrote:

> Hi,
> 
> Nicolas Ferre :
> > From: Hong Xu <hong.xu@atmel.com>
> > 
> > Modify atmel LCD driver: atmel_lcdfb for at91sam9g10.  This add a clock
> > management equivalent to at91sam9261.
> 
> Can we consider an inclusion in linux-fbdev ?

The patch looks OK to me.

> > Signed-off-by: Hong Xu <hong.xu@atmel.com>
> > Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
> 
> Andrew Victor added his:
> Acked-by: Andrew Victor <linux@maxim.org.za>
> 
> > ---
> >  drivers/video/Kconfig           |    4 ++--
> >  drivers/video/atmel_lcdfb.c     |    6 ++++--
> >  drivers/video/backlight/Kconfig |    2 +-
> >  3 files changed, 7 insertions(+), 5 deletions(-)

Please merge it via an ARM tree?

Re: [PATCH 5/5] at91/atmel_lcdfb: add at91sam9g10 support to atmel LCD driver

[Nicolas Ferre]

Andrew Morton :
> On Mon, 06 Jul 2009 12:32:53 +0200
> Nicolas Ferre <nicolas.ferre@atmel.com> wrote:
> 
>> Hi,
>>
>> Nicolas Ferre :
>>> From: Hong Xu <hong.xu@atmel.com>
>>>
>>> Modify atmel LCD driver: atmel_lcdfb for at91sam9g10.  This add a clock
>>> management equivalent to at91sam9261.
>> Can we consider an inclusion in linux-fbdev ?
> 
> The patch looks OK to me.
> 
>>> Signed-off-by: Hong Xu <hong.xu@atmel.com>
>>> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
>> Andrew Victor added his:
>> Acked-by: Andrew Victor <linux@maxim.org.za>
>>
>>> ---
>>>  drivers/video/Kconfig           |    4 ++--
>>>  drivers/video/atmel_lcdfb.c     |    6 ++++--
>>>  drivers/video/backlight/Kconfig |    2 +-
>>>  3 files changed, 7 insertions(+), 5 deletions(-)
> 
> Please merge it via an ARM tree?

Ok, queued in arm patch tracking system with number: 5614/1
http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=5614/1

Thanks, Bye,
-- 
Nicolas Ferre

Re: [PATCH 0/5] at91: Introduction of at91sam9g10 SOC

[Andrew Victor]

hi Nicolas,

> AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a
> faster clock speed: 266/133MHz.
>
> This patchset is relying on the integration of at91sam9g45 already posted. Here
> is the patch series that you will have to take into account before applying
> those patches.

This set of patches looks fine to me.

Acked-by: Andrew Victor <linux@maxim.org.za>