From: Yinghai Lu <yinghai@kernel.org>
To: Suresh Siddha <suresh.b.siddha@intel.com>,
David Woodhouse <David.Woodhouse@intel.com>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
Ingo Molnar <mingo@elte.hu>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
linux-pci@vger.kernel.org
Subject: [PATCH] pci/dmar: print out iommu seq_id
Date: Sun, 28 Jun 2009 14:12:21 -0700 [thread overview]
Message-ID: <4A47DCB5.7080901@kernel.org> (raw)
In-Reply-To: <4A47DBD5.6070307@kernel.org>
more info on multi iommu system.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
drivers/pci/dmar.c | 3 ++-
drivers/pci/intel-iommu.c | 9 ++++++---
drivers/pci/intr_remapping.c | 6 +++---
3 files changed, 11 insertions(+), 7 deletions(-)
Index: linux-2.6/drivers/pci/dmar.c
===================================================================
--- linux-2.6.orig/drivers/pci/dmar.c
+++ linux-2.6/drivers/pci/dmar.c
@@ -669,7 +669,8 @@ int alloc_iommu(struct dmar_drhd_unit *d
}
ver = readl(iommu->reg + DMAR_VER_REG);
- pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n",
+ pr_debug("IOMMU %d: reg_base_addr %llx ver %d:%d cap %llx ecap %llx\n",
+ iommu->seq_id,
(unsigned long long)drhd->reg_base_addr,
DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver),
(unsigned long long)iommu->cap,
Index: linux-2.6/drivers/pci/intel-iommu.c
===================================================================
--- linux-2.6.orig/drivers/pci/intel-iommu.c
+++ linux-2.6/drivers/pci/intel-iommu.c
@@ -1117,7 +1117,8 @@ static int iommu_init_domains(struct int
unsigned long nlongs;
ndomains = cap_ndoms(iommu->cap);
- pr_debug("Number of Domains supportd <%ld>\n", ndomains);
+ pr_debug("IOMMU %d: Number of Domains supportd <%ld>\n", iommu->seq_id,
+ ndomains);
nlongs = BITS_TO_LONGS(ndomains);
/* TBD: there might be 64K domains,
@@ -2230,14 +2231,16 @@ int __init init_dmars(void)
*/
iommu->flush.flush_context = __iommu_flush_context;
iommu->flush.flush_iotlb = __iommu_flush_iotlb;
- printk(KERN_INFO "IOMMU 0x%Lx: using Register based "
+ printk(KERN_INFO "IOMMU %d 0x%Lx: using Register based "
"invalidation\n",
+ iommu->seq_id,
(unsigned long long)drhd->reg_base_addr);
} else {
iommu->flush.flush_context = qi_flush_context;
iommu->flush.flush_iotlb = qi_flush_iotlb;
- printk(KERN_INFO "IOMMU 0x%Lx: using Queued "
+ printk(KERN_INFO "IOMMU %d 0x%Lx: using Queued "
"invalidation\n",
+ iommu->seq_id,
(unsigned long long)drhd->reg_base_addr);
}
}
Index: linux-2.6/drivers/pci/intr_remapping.c
===================================================================
--- linux-2.6.orig/drivers/pci/intr_remapping.c
+++ linux-2.6/drivers/pci/intr_remapping.c
@@ -760,9 +760,9 @@ static int ir_parse_ioapic_scope(struct
return -1;
}
- printk(KERN_INFO "IOAPIC id %d under DRHD base"
- " 0x%Lx\n", scope->enumeration_id,
- drhd->address);
+ printk(KERN_INFO "IOAPIC id %d under DRHD base "
+ " 0x%Lx IOMMU %d\n", scope->enumeration_id,
+ drhd->address, iommu->seq_id);
ir_parse_one_ioapic_scope(scope, iommu);
}
prev parent reply other threads:[~2009-06-28 21:12 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-28 21:08 [PATCH] pci/dmar: remove the noisy print out about unmapping Yinghai Lu
2009-06-28 21:11 ` [PATCH] pci/dmar: don't complain IOPAIC is not supported Yinghai Lu
2009-06-28 21:12 ` Yinghai Lu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A47DCB5.7080901@kernel.org \
--to=yinghai@kernel.org \
--cc=David.Woodhouse@intel.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=suresh.b.siddha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox