From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756722AbZGGLtv (ORCPT ); Tue, 7 Jul 2009 07:49:51 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1755169AbZGGLtn (ORCPT ); Tue, 7 Jul 2009 07:49:43 -0400 Received: from smtp4.usinternet.com ([216.17.3.201]:59641 "EHLO smtp4.usinternet.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754446AbZGGLth (ORCPT ); Tue, 7 Jul 2009 07:49:37 -0400 X-Greylist: delayed 725 seconds by postgrey-1.27 at vger.kernel.org; Tue, 07 Jul 2009 07:49:36 EDT Message-ID: <4A533378.7060607@netwolves.com> Date: Tue, 07 Jul 2009 07:37:28 -0400 From: Phillip Lynn User-Agent: Thunderbird 2.0.0.21 (X11/20090320) MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: Kernel error "kernel BUG at drivers/gpu/drm/i915/i915_gem.c:2136!" Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org This weekend I was trying to us Google Earth and received the following kernel error. I have not posted to the group before so if this is not the correct address to send an error please let me know. Thank You Phillip Lynn Jul 6 20:03:32 plynn54 kernel: ------------[ cut here ]------------ Jul 6 20:03:32 plynn54 kernel: kernel BUG at drivers/gpu/drm/i915/i915_gem.c:2136! Jul 6 20:03:32 plynn54 kernel: invalid opcode: 0000 [#1] SMP Jul 6 20:03:32 plynn54 kernel: last sysfs file: /sys/devices/pci0000:00/0000:00:1e.0/0000:04:05.0/local_cpus Jul 6 20:03:32 plynn54 kernel: CPU 1 Jul 6 20:03:32 plynn54 kernel: Modules linked in: fuse nfsd lockd nfs_acl auth_rpcgss exportfs sco bridge stp llc bnep l2cap bluetooth coretemp w83627ehf hwmon_vid hwmon sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table dm_multipath uinput snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep e100 snd_pcm firewire_ohci snd_timer i2c_i801 firewire_core crc_itu_t e1000e mii snd soundcore snd_page_alloc pata_jmicron iTCO_wdt iTCO_vendor_support pcspkr ata_generic pata_acpi i915 drm i2c_algo_bit i2c_core video output [last unloaded: microcode] Jul 6 20:03:32 plynn54 kernel: Pid: 9470, comm: googleearth-bin Not tainted 2.6.29.5-191.fc11.x86_64 #1 Jul 6 20:03:32 plynn54 kernel: RIP: 0010:[] [] i915_gem_object_get_fence_reg+0x221/0x61e [i915] Jul 6 20:03:32 plynn54 kernel: RSP: 0000:ffff8801f3cb1be8 EFLAGS: 00010202 Jul 6 20:03:32 plynn54 kernel: RAX: 000000000007bbc3 RBX: ffff8801c01eae40 RCX: 0000000000000010 Jul 6 20:03:32 plynn54 kernel: RDX: 0000000000002982 RSI: 000000000007bbc3 RDI: ffff8801c01ae000 Jul 6 20:03:32 plynn54 kernel: RBP: ffff8801f3cb1c28 R08: 0000000000000004 R09: ffff88022c96b1f0 Jul 6 20:03:32 plynn54 kernel: R10: ffff8801f3cb0000 R11: ffff8801f3cb1d38 R12: ffff88021a811d80 Jul 6 20:03:32 plynn54 kernel: R13: ffff88022c96b000 R14: ffff8801c01eacc0 R15: ffff88022c96a000 Jul 6 20:03:32 plynn54 kernel: FS: 0000000000000000(0000) GS:ffff88022e43e480(0063) knlGS:00000000f7faa700 Jul 6 20:03:32 plynn54 kernel: CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 Jul 6 20:03:32 plynn54 kernel: CR2: 00000000ebe2e000 CR3: 00000001c0057000 CR4: 00000000000006e0 Jul 6 20:03:32 plynn54 kernel: DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 6 20:03:32 plynn54 kernel: DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 6 20:03:32 plynn54 kernel: Process googleearth-bin (pid: 9470, threadinfo ffff8801f3cb0000, task ffff8801c00bc500) Jul 6 20:03:32 plynn54 kernel: Stack: Jul 6 20:03:32 plynn54 kernel: ffff8801f3cb1c38 ffff88022c96b1f0 ffff88022c96a020 ffff8801c01eacc0 Jul 6 20:03:32 plynn54 kernel: ffff88022c96a020 ffff8801c01eae40 ffff8801f4d64210 ffff8801f3cb1ce8 Jul 6 20:03:32 plynn54 kernel: ffff8801f3cb1c98 ffffffffa00610d3 ffff8801f3cb1c68 00000000ebe2e000 Jul 6 20:03:32 plynn54 kernel: Call Trace: Jul 6 20:03:32 plynn54 kernel: [] i915_gem_fault+0xc1/0x136 [i915] Jul 6 20:03:32 plynn54 kernel: [] __do_fault+0x55/0x3d5 Jul 6 20:03:32 plynn54 kernel: [] ? drm_agp_bind_memory+0x18/0x1a [drm] Jul 6 20:03:32 plynn54 kernel: [] ? drm_agp_bind_pages+0xd8/0x10c [drm] Jul 6 20:03:32 plynn54 kernel: [] handle_mm_fault+0x349/0x7c5 Jul 6 20:03:32 plynn54 kernel: [] do_page_fault+0x5b5/0x9e9 Jul 6 20:03:32 plynn54 kernel: [] ? __dequeue_entity+0x33/0x38 Jul 6 20:03:32 plynn54 kernel: [] ? unlock_kernel+0x2f/0x32 Jul 6 20:03:32 plynn54 kernel: [] ? i915_compat_ioctl+0x74/0x81 [i915] Jul 6 20:03:32 plynn54 kernel: [] ? compat_sys_ioctl+0x352/0x367 Jul 6 20:03:32 plynn54 kernel: [] ? trace_hardirqs_off_thunk+0x3a/0x6c Jul 6 20:03:32 plynn54 kernel: [] page_fault+0x25/0x30 Jul 6 20:03:32 plynn54 kernel: Code: ff e8 35 e9 ff ff 85 c0 0f 84 b3 fe ff ff e9 06 04 00 00 41 83 7c 24 20 00 75 10 48 8b 55 c8 48 8b 02 f7 40 70 be ff ff ff 74 04 <0f> 0b eb fe 49 8b bf 38 01 00 00 48 8b 70 38 48 85 ff 74 1a 48 Jul 6 20:03:32 plynn54 kernel: RIP [] i915_gem_object_get_fence_reg+0x221/0x61e [i915] Jul 6 20:03:32 plynn54 kernel: RSP Jul 6 20:03:32 plynn54 kernel: ---[ end trace 5745c84a41a3540a ]--- Jul 6 20:04:14 plynn54 mountd[1829]: Caught signal 15, un-registering and exiting. Jul 6 20:04:14 plynn54 kernel: nfsd: last server has exited, flushing export cache Jul 6 20:04:18 plynn54 init: prefdm main process (2164) killed by KILL signal Jul 6 20:04:45 plynn54 squid[2056]: Squid Parent: child process 2059 exited with status 0 Jul 6 20:04:49 plynn54 xinetd[1764]: Exiting... Jul 6 20:04:49 plynn54 acpid: exiting Jul 6 20:04:49 plynn54 NetworkManager: HAL disappeared Jul 6 20:04:49 plynn54 pcscd: pcscdaemon.c:581:signal_trap() Preparing for suicide Jul 6 20:04:50 plynn54 pcscd: readerfactory.c:1242:RFCleanupReaders() entering cleaning function Jul 6 20:04:50 plynn54 pcscd: pcscdaemon.c:531:at_exit() cleaning /var/run Jul 6 20:04:50 plynn54 bluetoothd[1695]: bridge pan0 removed Jul 6 20:04:50 plynn54 bluetoothd[1695]: Stopping SDP server Jul 6 20:04:50 plynn54 bluetoothd[1695]: Exit Jul 6 20:04:50 plynn54 NetworkManager: nm_signal_handler(): Caught signal 15, shutting down normally. Jul 6 20:04:50 plynn54 NetworkManager: (eth1): now unmanaged Jul 6 20:04:50 plynn54 NetworkManager: (eth1): device state change: 2 -> 1 Jul 6 20:04:50 plynn54 NetworkManager: (eth1): cleaning up... Jul 6 20:04:50 plynn54 NetworkManager: (eth1): taking down device. Jul 6 20:04:50 plynn54 NetworkManager: (eth0): now unmanaged Jul 6 20:04:50 plynn54 NetworkManager: (eth0): device state change: 8 -> 1 Jul 6 20:04:50 plynn54 NetworkManager: (eth0): deactivating device (reason: 36). Jul 6 20:04:50 plynn54 NetworkManager: check_one_route(): (eth0) error -34 returned from rtnl_route_del(): Sucess#012 Jul 6 20:04:50 plynn54 NetworkManager: (eth0): cleaning up... Jul 6 20:04:50 plynn54 NetworkManager: (eth0): taking down device. Jul 6 20:04:51 plynn54 NetworkManager: exiting (success) Jul 6 20:04:52 plynn54 nm-system-settings: disconnected from the system bus, exiting. Jul 6 20:04:52 plynn54 nm-dispatcher.action: Disconnected from the system bus, exiting. Jul 6 20:04:52 plynn54 rpc.statd[1384]: Caught signal 15, un-registering and exiting. Jul 6 20:04:52 plynn54 rpcbind: rpcbind terminating on signal. Restart with "rpcbind -w" Jul 6 20:04:52 plynn54 auditd[1313]: Error sending signal_info request (Operation not supported) Jul 6 20:04:52 plynn54 auditd[1313]: The audit daemon is exiting. Jul 6 20:04:52 plynn54 kernel: audit(1246925092.486:387): audit_pid=0 old=1313 auid=4294967295 ses=4294967295 res=1 Jul 6 20:04:52 plynn54 kernel: Kernel logging (proc) stopped. Jul 6 20:05:29 plynn54 kernel: imklog 3.21.11, log source = /proc/kmsg started. Jul 6 20:05:29 plynn54 kernel: Initializing cgroup subsys cpuset Jul 6 20:05:29 plynn54 kernel: Initializing cgroup subsys cpu Jul 6 20:05:29 plynn54 kernel: Linux version 2.6.29.5-191.fc11.x86_64 (mockbuild@x86-5.fedora.phx.redhat.com) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) #1 SMP Tue Jun 16 23:23:21 EDT 2009 Jul 6 20:05:29 plynn54 kernel: Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Jul 6 20:05:29 plynn54 kernel: KERNEL supported cpus: Jul 6 20:05:29 plynn54 kernel: Intel GenuineIntel Jul 6 20:05:29 plynn54 kernel: AMD AuthenticAMD Jul 6 20:05:29 plynn54 kernel: Centaur CentaurHauls Jul 6 20:05:29 plynn54 kernel: BIOS-provided physical RAM map: Jul 6 20:05:29 plynn54 kernel: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) Jul 6 20:05:29 plynn54 kernel: BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) Dmesg: [plynn54@plynn54 ~]$ dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.29.5-191.fc11.x86_64 (mockbuild@x86-5.fedora.phx.redhat.com) (gcc version 4.4.0 20090506 (Red Hat 4.4.0-4) (GCC) ) #1 SMP Tue Jun 16 23:23:21 EDT 2009 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD Centaur CentaurHauls BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000008f000 (usable) BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cf543000 (usable) BIOS-e820: 00000000cf543000 - 00000000cf54f000 (reserved) BIOS-e820: 00000000cf54f000 - 00000000cf5fe000 (usable) BIOS-e820: 00000000cf5fe000 - 00000000cf6e8000 (ACPI NVS) BIOS-e820: 00000000cf6e8000 - 00000000cf6ec000 (usable) BIOS-e820: 00000000cf6ec000 - 00000000cf6f1000 (ACPI data) BIOS-e820: 00000000cf6f1000 - 00000000cf6f2000 (usable) BIOS-e820: 00000000cf6f2000 - 00000000cf6ff000 (ACPI data) BIOS-e820: 00000000cf6ff000 - 00000000cf700000 (usable) BIOS-e820: 00000000cf700000 - 00000000d0000000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000230000000 (usable) DMI 2.4 present. last_pfn = 0x230000 max_arch_pfn = 0x100000000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 original variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 3320MB, range: 8MB, type UC reg 4, base: 3319MB, range: 1MB, type UC reg 5, base: 4GB, range: 4GB, type WB reg 6, base: 8GB, range: 2GB, type WB total RAM coverred: 9463M Found optimal setting for mtrr clean up gran_size: 64K chunk_size: 16M num_reg: 7 lose cover RAM: 0G New variable MTRRs reg 0, base: 0GB, range: 2GB, type WB reg 1, base: 2GB, range: 1GB, type WB reg 2, base: 3GB, range: 256MB, type WB reg 3, base: 3319MB, range: 1MB, type UC reg 4, base: 3320MB, range: 8MB, type UC reg 5, base: 4GB, range: 4GB, type WB reg 6, base: 8GB, range: 2GB, type WB x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0xcf700 max_arch_pfn = 0x100000000 init_memory_mapping: 0000000000000000-00000000cf700000 0000000000 - 00cf600000 page 2M 00cf600000 - 00cf700000 page 4k kernel direct mapping tables up to cf700000 @ 8000-e000 last_map_addr: cf700000 end: cf700000 init_memory_mapping: 0000000100000000-0000000230000000 0100000000 - 0230000000 page 2M kernel direct mapping tables up to 230000000 @ c000-16000 last_map_addr: 230000000 end: 230000000 RAMDISK: 37c6e000 - 37fef9c0 ACPI: RSDP 000FE020, 0014 (r0 INTEL ) ACPI: RSDT CF6FD038, 004C (r1 INTEL ECG3510M 6A 1000013) ACPI: FACP CF6FC000, 0074 (r1 INTEL ECG3510M 6A MSFT 1000013) FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4) ACPI: DSDT CF6F6000, 5BEB (r1 INTEL ECG3510M 6A MSFT 1000013) ACPI: FACS CF693000, 0040 ACPI: APIC CF6F5000, 0078 (r1 INTEL ECG3510M 6A MSFT 1000013) ACPI: WDDT CF6F4000, 0040 (r1 INTEL ECG3510M 6A MSFT 1000013) ACPI: MCFG CF6F3000, 003C (r1 INTEL ECG3510M 6A MSFT 1000013) ACPI: ASF! CF6F2000, 00A6 (r32 INTEL ECG3510M 6A MSFT 1000013) ACPI: SSDT CF6F0000, 020C (r1 INTEL CpuPm 6A MSFT 1000013) ACPI: SSDT CF6EF000, 01B7 (r1 INTEL Cpu0Ist 6A MSFT 1000013) ACPI: SSDT CF6EE000, 01B7 (r1 INTEL Cpu1Ist 6A MSFT 1000013) ACPI: SSDT CF6ED000, 01B7 (r1 INTEL Cpu2Ist 6A MSFT 1000013) ACPI: SSDT CF6EC000, 01B7 (r1 INTEL Cpu3Ist 6A MSFT 1000013) ACPI: Local APIC address 0xfee00000 No NUMA configuration found Faking a node at 0000000000000000-0000000230000000 Bootmem setup node 0 0000000000000000-0000000230000000 NODE_DATA [0000000000011000 - 0000000000025fff] bootmap [0000000000026000 - 000000000006bfff] pages 46 (7 early reservations) ==> bootmem [0000000000 - 0230000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] #2 [0000200000 - 0000ac700c] TEXT DATA BSS ==> [0000200000 - 0000ac700c] #3 [0037c6e000 - 0037fef9c0] RAMDISK ==> [0037c6e000 - 0037fef9c0] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] #6 [000000c000 - 0000011000] PGTABLE ==> [000000c000 - 0000011000] found SMP MP-table at [ffff8800000fe200] 000fe200 [ffffe20000000000-ffffe20007bfffff] PMD -> [ffff880028200000-ffff88002f3fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00230000 Movable zone start PFN for each node early_node_map[7] active PFN ranges 0: 0x00000000 -> 0x0000008f 0: 0x00000100 -> 0x000cf543 0: 0x000cf54f -> 0x000cf5fe 0: 0x000cf6e8 -> 0x000cf6ec 0: 0x000cf6f1 -> 0x000cf6f2 0: 0x000cf6ff -> 0x000cf700 0: 0x00100000 -> 0x00230000 On node 0 totalpages: 2094471 DMA zone: 56 pages used for memmap DMA zone: 2357 pages reserved DMA zone: 1570 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 831024 pages, LIFO batch:31 Normal zone: 17024 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000008f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 00000000cf543000 - 00000000cf54f000 PM: Registered nosave memory: 00000000cf5fe000 - 00000000cf6e8000 PM: Registered nosave memory: 00000000cf6ec000 - 00000000cf6f1000 PM: Registered nosave memory: 00000000cf6f2000 - 00000000cf6ff000 PM: Registered nosave memory: 00000000cf700000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000fff00000 PM: Registered nosave memory: 00000000fff00000 - 0000000100000000 Allocating PCI resources starting at d4000000 (gap: d0000000:2ff00000) NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Allocating 57344 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2060754 Policy zone: Normal Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Fast TSC calibration using PIT Detected 2653.394 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled allocated 83886080 bytes of page_cgroup please try cgroup_disable=memory option if you don't want Checking aperture... No AGP bridge found Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000 software IO TLB at phys 0x20000000 - 0x24000000 Memory: 8099988k/9175040k available (3786k kernel code, 797156k absent, 277896k reserved, 2293k data, 1304k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Calibrating delay loop (skipped), value calculated using timer frequency.. 5306.78 BogoMIPS (lpj=2653394) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0x0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20081204 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 18886 entries in 149 pages Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b APIC calibration not consistent with PM Timer: 101ms instead of 100ms APIC delta adjusted to PM-Timer: 1658328 (1691240) Booting processor 1 APIC 0x2 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5306.64 BogoMIPS (lpj=2653324) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/0x2 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 2 CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2 APIC 0x1 ip 0x6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5306.62 BogoMIPS (lpj=2653311) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/0x1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3 APIC 0x3 ip 0x6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5306.62 BogoMIPS (lpj=2653312) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/0x3 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 3 CPU3: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Core(TM)2 Quad CPU Q6700 @ 2.66GHz stepping 0b checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (21226.68 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=192 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5880 bytes CPU0 attaching sched-domain: domain 0: span 0,2 level MC groups: 0 2 domain 1: span 0-3 level CPU groups: 0,2 1,3 CPU1 attaching sched-domain: domain 0: span 1,3 level MC groups: 1 3 domain 1: span 0-3 level CPU groups: 1,3 0,2 CPU2 attaching sched-domain: domain 0: span 0,2 level MC groups: 2 0 domain 1: span 0-3 level CPU groups: 0,2 1,3 CPU3 attaching sched-domain: domain 0: span 1,3 level MC groups: 3 1 domain 1: span 0-3 level CPU groups: 1,3 0,2 net_namespace: 1904 bytes Booting paravirtualized kernel on bare hardware regulator: core version 0.5 Time: 0:05:13 Date: 07/07/09 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: Not using MMCONFIG. PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 PCI: MCFG area at f0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG at f0000000 - f7ffffff ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xe0200000-0xe02fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff] pci 0000:00:02.0: reg 20 io port: [0x3440-0x3447] pci 0000:00:02.1: reg 10 32bit mmio: [0xe0100000-0xe01fffff] pci 0000:00:19.0: reg 10 32bit mmio: [0xe0300000-0xe031ffff] pci 0000:00:19.0: reg 14 32bit mmio: [0xe0324000-0xe0324fff] pci 0000:00:19.0: reg 18 io port: [0x30c0-0x30df] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold pci 0000:00:19.0: PME# disabled pci 0000:00:1a.0: reg 20 io port: [0x30a0-0x30bf] pci 0000:00:1a.1: reg 20 io port: [0x3080-0x309f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xe0325400-0xe03257ff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xe0320000-0xe0323fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x3060-0x307f] pci 0000:00:1d.1: reg 20 io port: [0x3040-0x305f] pci 0000:00:1d.2: reg 20 io port: [0x3020-0x303f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe0325000-0xe03253ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) pci 0000:00:1f.2: reg 10 io port: [0x3438-0x343f] pci 0000:00:1f.2: reg 14 io port: [0x3454-0x3457] pci 0000:00:1f.2: reg 18 io port: [0x3430-0x3437] pci 0000:00:1f.2: reg 1c io port: [0x3450-0x3453] pci 0000:00:1f.2: reg 20 io port: [0x3410-0x341f] pci 0000:00:1f.2: reg 24 io port: [0x3400-0x340f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xe0325800-0xe03258ff] pci 0000:00:1f.3: reg 20 io port: [0x3000-0x301f] pci 0000:00:1f.5: reg 10 io port: [0x3428-0x342f] pci 0000:00:1f.5: reg 14 io port: [0x344c-0x344f] pci 0000:00:1f.5: reg 18 io port: [0x3420-0x3427] pci 0000:00:1f.5: reg 1c io port: [0x3448-0x344b] pci 0000:00:1f.5: reg 20 io port: [0x30f0-0x30ff] pci 0000:00:1f.5: reg 24 io port: [0x30e0-0x30ef] pci 0000:00:1f.5: PME# supported from D3hot pci 0000:00:1f.5: PME# disabled pci 0000:03:00.0: reg 10 io port: [0x2018-0x201f] pci 0000:03:00.0: reg 14 io port: [0x2024-0x2027] pci 0000:03:00.0: reg 18 io port: [0x2010-0x2017] pci 0000:03:00.0: reg 1c io port: [0x2020-0x2023] pci 0000:03:00.0: reg 20 io port: [0x2000-0x200f] pci 0000:03:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff] pci 0000:04:03.0: reg 10 32bit mmio: [0xe0021000-0xe0021fff] pci 0000:04:03.0: reg 14 io port: [0x1000-0x103f] pci 0000:04:03.0: reg 18 32bit mmio: [0xe0000000-0xe001ffff] pci 0000:04:03.0: reg 30 32bit mmio: [0xffff0000-0xffffffff] pci 0000:04:03.0: supports D1 D2 pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:03.0: PME# disabled pci 0000:04:05.0: reg 10 32bit mmio: [0xe0020000-0xe0020fff] pci 0000:04:05.0: supports D1 D2 pci 0000:04:05.0: PME# supported from D0 D1 D2 D3hot pci 0000:04:05.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x1000-0x1fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xe0000000-0xe00fffff] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved system 00:01: iomem range 0xc0000-0xdffff has been reserved system 00:01: iomem range 0xe0000-0xfffff could not be reserved system 00:06: ioport range 0x500-0x53f has been reserved system 00:06: ioport range 0x400-0x47f has been reserved system 00:06: ioport range 0x360-0x361 has been reserved system 00:06: ioport range 0x680-0x6ff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 pci 0000:00:1c.0: IO window: disabled pci 0000:00:1c.0: MEM window: disabled pci 0000:00:1c.0: PREFETCH window: disabled pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.1: IO window: disabled pci 0000:00:1c.1: MEM window: disabled pci 0000:00:1c.1: PREFETCH window: disabled pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.2: IO window: 0x2000-0x2fff pci 0000:00:1c.2: MEM window: disabled pci 0000:00:1c.2: PREFETCH window: 0x000000e0400000-0x000000e04fffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 pci 0000:00:1e.0: IO window: 0x1000-0x1fff pci 0000:00:1e.0: MEM window: 0xe0000000-0xe00fffff pci 0000:00:1e.0: PREFETCH window: 0x000000e0500000-0x000000e05fffff alloc irq_desc for 17 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 16 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 18 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 mem: [0x0-0x0] pci_bus 0000:01: resource 1 mem: [0x0-0x0] pci_bus 0000:01: resource 2 mem: [0x0-0x0] pci_bus 0000:01: resource 3 mem: [0x0-0x0] pci_bus 0000:02: resource 0 mem: [0x0-0x0] pci_bus 0000:02: resource 1 mem: [0x0-0x0] pci_bus 0000:02: resource 2 mem: [0x0-0x0] pci_bus 0000:02: resource 3 mem: [0x0-0x0] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] pci_bus 0000:03: resource 1 mem: [0x0-0x0] pci_bus 0000:03: resource 2 mem: [0xe0400000-0xe04fffff] pci_bus 0000:03: resource 3 mem: [0x0-0x0] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff] pci_bus 0000:04: resource 1 mem: [0xe0000000-0xe00fffff] pci_bus 0000:04: resource 2 mem: [0xe0500000-0xe05fffff] pci_bus 0000:04: resource 3 io: [0x00-0xffff] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3590k freed audit: initializing netlink socket (disabled) type=2000 audit(1246925112.503:1): initialized HugeTLB registered 2 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 15827 SELinux: Registering netfilter hooks alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pci 0000:04:03.0: Firmware left e100 interrupts enabled; disabling pcieport-driver 0000:00:1c.0: setting latency timer to 64 alloc irq_desc for 24 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 alloc irq_desc for 25 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 alloc irq_desc for 26 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: PCI Express Hot Plug Controller Driver version: 0.4 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_glue: can't get bus number, assuming 0 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 ACPI: Sleep Button (CM) [SLPB] processor ACPI_CPU:00: registered as cooling_device0 ACPI: Processor [CPU0] (supports 8 throttling states) processor ACPI_CPU:01: registered as cooling_device1 ACPI: Processor [CPU1] (supports 8 throttling states) processor ACPI_CPU:02: registered as cooling_device2 ACPI: Processor [CPU2] (supports 8 throttling states) processor ACPI_CPU:03: registered as cooling_device3 ACPI: Processor [CPU3] (supports 8 throttling states) Non-volatile memory driver v1.3 Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel G35 Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded loop: module loaded Fixed MDIO Bus: probed input: Macintosh mouse button emulation as /devices/virtual/input/input2 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods ata_piix 0000:00:1f.2: version 2.12 alloc irq_desc for 19 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ata_piix 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 0 ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x3438 ctl 0x3454 bmdma 0x3410 irq 19 ata2: SATA max UDMA/133 cmd 0x3430 ctl 0x3450 bmdma 0x3418 irq 19 ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.01: SATA link down (SStatus 4 SControl 300) ata1.00: ATA-8: WDC WD5000AAKS-22A7B2, 01.03B01, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.01: SATA link down (SStatus 4 SControl 300) ata2.00: ATAPI: SONY DVD RW DRU-V200S, 1.60, max UDMA/100 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM SONY DVD RW DRU-V200S 1.60 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 ata_piix 0000:00:1f.5: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] ata_piix 0000:00:1f.5: setting latency timer to 64 scsi2 : ata_piix scsi3 : ata_piix ata3: SATA max UDMA/133 cmd 0x3428 ctl 0x344c bmdma 0x30f0 irq 19 ata4: SATA max UDMA/133 cmd 0x3420 ctl 0x3448 bmdma 0x30f8 irq 19 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0325400 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected alloc irq_desc for 23 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0325000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64 ehci_hcd usb usb2: SerialNumber: 0000:00:1d.7 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1a.0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected alloc irq_desc for 21 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00003080 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003060 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003040 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003020 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.29.5-191.fc11.x86_64 uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice rtc_cmos 00:03: RTC can wake from S4 rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver nf_conntrack version 0.5.0 (16384 buckets, 65536 max) CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or sysctl net.netfilter.nf_conntrack_acct=1 to enable it. ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 1:41:51 Initalizing network drop monitor service Freeing unused kernel memory: 1304k freed Write protecting the kernel read-only data: 1844k input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 alloc irq_desc for 27 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 i915 0000:00:02.0: irq 27 for MSI/MSI-X usb 6-1: new low speed USB device using uhci_hcd and address 2 usb 6-1: New USB device found, idVendor=046d, idProduct=c404 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: Trackball usb 6-1: Manufacturer: Logitech usb 6-1: configuration #1 chosen from 1 choice allocated 1440x900 fb: 0x007df000, bo ffff88022cac80c0 Console: switching to colour frame buffer device 180x56 input: Logitech Trackball as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input4 [drm] DAC-6: set mode 1440x900 20 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.1-1/input0 pata_acpi 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pata_acpi 0000:03:00.0: setting latency timer to 64 pata_acpi 0000:03:00.0: PCI INT A disabled EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: dm-0: orphan cleanup on readonly fs ext3_orphan_cleanup: deleting unreferenced inode 14131833 ext3_orphan_cleanup: deleting unreferenced inode 14131239 ext3_orphan_cleanup: deleting unreferenced inode 14131221 ext3_orphan_cleanup: deleting unreferenced inode 14131219 EXT3-fs: dm-0: 4 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1246925120.432:2): selinux=0 auid=4294967295 ses=4294967295 udev: starting version 141 input: PC Speaker as /devices/platform/pcspkr/input/input5 e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI e100: Copyright(c) 1999-2006 Intel Corporation e100 0000:04:03.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 e100 0000:04:03.0: PME# disabled iTCO_vendor_support: vendor-support=0 e100: eth0: e100_probe: addr 0xe0021000, irq 17, MAC addr 00:02:b3:36:b8:64 udev: renamed network interface eth0 to eth1 i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. alloc irq_desc for 20 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 e1000e 0000:00:19.0: setting latency timer to 64 alloc irq_desc for 28 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 e1000e 0000:00:19.0: irq 28 for MSI/MSI-X 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:af:b3:98 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection 0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff alloc irq_desc for 22 on cpu 0 node 0 alloc kstat_irqs on cpu 0 node 0 HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:3507: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3511: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3515: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:3516: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:3524: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 pata_jmicron 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pata_jmicron 0000:03:00.0: setting latency timer to 64 scsi4 : pata_jmicron scsi5 : pata_jmicron ata5: PATA max UDMA/100 cmd 0x2018 ctl 0x2024 bmdma 0x2000 irq 18 ata6: PATA max UDMA/100 cmd 0x2010 ctl 0x2020 bmdma 0x2008 irq 18 firewire_ohci 0000:04:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 firewire_ohci: Added fw-ohci device 0000:04:05.0, OHCI version 1.0 device-mapper: multipath: version 1.0.5 loaded firewire_core: created device fw0: GUID 00902700024952e9, S400 EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. swap_cgroup: uses 39936 bytes of vmalloc for pointer array space and 20447232 bytes to hold mem_cgroup pointers on swap swap_cgroup can be disabled by noswapaccount boot option. Adding 10223608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:10223608k platform microcode: firmware: requesting intel-ucode/06-0f-0b platform microcode: firmware: requesting intel-ucode/06-0f-0b platform microcode: firmware: requesting intel-ucode/06-0f-0b platform microcode: firmware: requesting intel-ucode/06-0f-0b Microcode Update Driver: v2.00 , Peter Oruba microcode: CPU0 updated from revision 0x0 to 0xb6, date = 2007-07-13 microcode: CPU1 updated from revision 0x0 to 0xb6, date = 2007-07-13 microcode: CPU2 updated from revision 0x0 to 0xb6, date = 2007-07-13 microcode: CPU3 updated from revision 0x0 to 0xb6, date = 2007-07-13 Microcode Update Driver: v2.00 removed. NET: Registered protocol family 10 lo: Disabled Privacy Extensions RPC: Registered udp transport module. RPC: Registered tcp transport module. w83627ehf: Found W83627DHG chip at 0x6e0 coretemp coretemp.0: Using relative temperature scale! coretemp coretemp.1: Using relative temperature scale! coretemp coretemp.2: Using relative temperature scale! coretemp coretemp.3: Using relative temperature scale! Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.13 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period ADDRCONF(NETDEV_UP): eth1: link is not ready e1000e 0000:00:19.0: irq 28 for MSI/MSI-X e1000e 0000:00:19.0: irq 28 for MSI/MSI-X ADDRCONF(NETDEV_UP): eth0: link is not ready e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX 0000:00:19.0: eth0: 10/100 speed: disabling TSO ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present fuse init (API version 7.11)