From: Yinghai Lu <yinghai@kernel.org>
To: dann frazier <dannf@hp.com>
Cc: linux-scsi@vger.kernel.org,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: mptsas, msi and the dl585 g2
Date: Thu, 09 Jul 2009 12:17:55 -0700 [thread overview]
Message-ID: <4A564263.5010305@kernel.org> (raw)
In-Reply-To: <20090709185945.GG2613@ldl.fc.hp.com>
dann frazier wrote:
>
> --------------------------------------------------------------------
> commit 30a18d6c3f1e774de656ebd8ff219d53e2ba4029
> Author: Yinghai Lu <Yinghai.Lu@Sun.COM>
> Date: Tue Feb 19 03:21:20 2008 -0800
>
> x86: multi pci root bus with different io resource range, on
> 64-bit
> --------------------------------------------------------------------
>
> This appears to be the commit that actually introduced the issue.
> I've attached dmesg w/ PCI DEBUG enabled from both sides of this
> changeset, as well as a diff w/o printk timestamps.
>
> Also note that #ifdef'ing out x86_pci_root_bus_res_quirks() in
> amd_bus.c seems to avoid the problem as well.
your BIOS didn't allocate io resources to some device under HT chain on node1/link2
aka under peer root bus.
Kernel try to allocate resource to them.
and the patch did right thing according to range
bus: 40 index 1 mmio: [d9f00000, dfefffff]
YH
+bus: [00,3f] on node 0 link 1
+bus: 00 index 0 io port: [0, 2fff]
+bus: 00 index 1 mmio: [80000000, d9efffff]
+bus: 00 index 2 mmio: [dff00000, e3ffffff]
+bus: 00 index 3 mmio: [a0000, bffff]
+bus: 00 index 4 mmio: [e8000000, ffffffff]
+bus: 00 index 5 mmio: [480000000, fbffffffff]
+bus: [40,7f] on node 1 link 2
+bus: 40 index 0 io port: [3000, ffff]
+bus: 40 index 1 mmio: [d9f00000, dfefffff]
+bus: 40 index 2 mmio: [e4000000, e7ffffff]
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
@@ -646,18 +659,18 @@
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
- got res [88000000:8801ffff] bus [88000000:8801ffff] flags 27200 for BAR 6 of 0000:41:01.0
- got res [88020000:8803ffff] bus [88020000:8803ffff] flags 27200 for BAR 6 of 0000:41:02.0
+ got res [d9f00000:d9f1ffff] bus [d9f00000:d9f1ffff] flags 27200 for BAR 6 of 0000:41:01.0
+ got res [d9f20000:d9f3ffff] bus [d9f20000:d9f3ffff] flags 27200 for BAR 6 of 0000:41:02.0
PCI: Bridge: 0000:40:10.0
IO window: disabled.
MEM window: 0xda000000-0xddffffff
- PREFETCH window: 0x0000000088000000-0x00000000880fffff
- got res [88200000:883fffff] bus [88200000:883fffff] flags 27200 for BAR 6 of 0000:42:01.0
- got res [88100000:8813ffff] bus [88100000:8813ffff] flags 27200 for BAR 6 of 0000:42:02.0
+ PREFETCH window: 0x00000000d9f00000-0x00000000d9ffffff
+ got res [de000000:de1fffff] bus [de000000:de1fffff] flags 27200 for BAR 6 of 0000:42:01.0
+ got res [de200000:de23ffff] bus [de200000:de23ffff] flags 27200 for BAR 6 of 0000:42:02.0
PCI: Bridge: 0000:40:11.0
IO window: 3000-3fff
MEM window: 0xdfe00000-0xdfefffff
- PREFETCH window: 0x0000000088100000-0x00000000883fffff
+ PREFETCH window: 0x00000000de000000-0x00000000de2fffff
next prev parent reply other threads:[~2009-07-09 19:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20090630180300.GA9971@ldl.fc.hp.com>
[not found] ` <4A4A5B01.9040200@kernel.org>
[not found] ` <20090703225708.GA30664@ldl.fc.hp.com>
2009-07-04 19:30 ` mptsas, msi and the dl585 g2 Yinghai Lu
2009-07-06 16:57 ` dann frazier
2009-07-09 18:59 ` dann frazier
2009-07-09 19:17 ` Yinghai Lu [this message]
2009-07-09 19:34 ` Yinghai Lu
2009-07-09 19:48 ` Yinghai Lu
2009-07-09 20:40 ` James Bottomley
2009-07-09 21:12 ` Yinghai Lu
2009-07-09 21:41 ` [PATCH} x86/pci: insert ioapic resource before assign unassigned resource for pci Yinghai Lu
2009-07-09 22:01 ` dann frazier
2009-07-10 16:36 ` [PATCH] x86/pci: insert ioapic resource before assign unassigned resource for pci -v2 Yinghai Lu
2009-07-10 20:03 ` Jesse Barnes
2009-07-10 21:27 ` Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4A564263.5010305@kernel.org \
--to=yinghai@kernel.org \
--cc=dannf@hp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox