public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
To: Matthew Garrett <mjg@redhat.com>
Cc: Maciej Rutecki <maciej.rutecki@gmail.com>,
	linux acpi <linux-acpi@vger.kernel.org>,
	linux-kernel <linux-kernel@vger.kernel.org>
Subject: [PATCH] hp-wmi: improve rfkill support
Date: Tue, 21 Jul 2009 12:14:01 +0100	[thread overview]
Message-ID: <4A65A2F9.1060509@tuffmail.co.uk> (raw)

1) Add support for reading the hardware blocked state.  Previously
   we read a combination of the hardware and software blocked states,
   reporting it as the software blocked state.  This caused some
   confusing behaviour.

2) The software state is persistent, mark it as such.

3) Check rfkill in the resume handler.  Both the hard and soft
   blocked states may change over hibernation.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Tested-by: Maciej Rutecki <maciej.rutecki@gmail.com>
---

This code is the combination of two patches tested by Maciej.
There are no changes to that code, only an updated changelog.

I tested wifi on the G7000.  Maciej tested wifi and bluetooth.
wwan is as yet untested; we are assuming the interface follows
the same pattern as wifi and bluetooth.

 drivers/platform/x86/hp-wmi.c |  139 +++++++++++++++++++++++++----------------
 1 files changed, 84 insertions(+), 55 deletions(-)

diff --git a/drivers/platform/x86/hp-wmi.c b/drivers/platform/x86/hp-wmi.c
index ca50856..adb26d3 100644
--- a/drivers/platform/x86/hp-wmi.c
+++ b/drivers/platform/x86/hp-wmi.c
@@ -51,6 +51,12 @@ MODULE_ALIAS("wmi:5FB7F034-2C63-45e9-BE91-3D44E2C707E4");
 #define HPWMI_WIRELESS_QUERY 0x5
 #define HPWMI_HOTKEY_QUERY 0xc
 
+enum hp_wmi_radio {
+	HPWMI_WIFI = 0,
+	HPWMI_BLUETOOTH = 1,
+	HPWMI_WWAN = 2,
+};
+
 static int __init hp_wmi_bios_setup(struct platform_device *device);
 static int __exit hp_wmi_bios_remove(struct platform_device *device);
 static int hp_wmi_resume_handler(struct platform_device *device);
@@ -170,8 +176,8 @@ static int hp_wmi_tablet_state(void)
 
 static int hp_wmi_set_block(void *data, bool blocked)
 {
-	unsigned long b = (unsigned long) data;
-	int query = BIT(b + 8) | ((!blocked) << b);
+	enum hp_wmi_radio r = (enum hp_wmi_radio) data;
+	int query = BIT(r + 8) | ((!blocked) << r);
 
 	return hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 1, query);
 }
@@ -180,31 +186,23 @@ static const struct rfkill_ops hp_wmi_rfkill_ops = {
 	.set_block = hp_wmi_set_block,
 };
 
-static bool hp_wmi_wifi_state(void)
+static bool hp_wmi_get_sw_state(enum hp_wmi_radio r)
 {
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+	int mask = 0x200 << (r * 8);
 
-	if (wireless & 0x100)
+	if (wireless & mask)
 		return false;
 	else
 		return true;
 }
 
-static bool hp_wmi_bluetooth_state(void)
+static bool hp_wmi_get_hw_state(enum hp_wmi_radio r)
 {
 	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
+	int mask = 0x800 << (r * 8);
 
-	if (wireless & 0x10000)
-		return false;
-	else
-		return true;
-}
-
-static bool hp_wmi_wwan_state(void)
-{
-	int wireless = hp_wmi_perform_query(HPWMI_WIRELESS_QUERY, 0, 0);
-
-	if (wireless & 0x1000000)
+	if (wireless & mask)
 		return false;
 	else
 		return true;
@@ -329,49 +327,55 @@ static void hp_wmi_notify(u32 value, void *context)
 	struct acpi_buffer response = { ACPI_ALLOCATE_BUFFER, NULL };
 	static struct key_entry *key;
 	union acpi_object *obj;
+	int eventcode;
 
 	wmi_get_event_data(value, &response);
 
 	obj = (union acpi_object *)response.pointer;
 
-	if (obj && obj->type == ACPI_TYPE_BUFFER && obj->buffer.length == 8) {
-		int eventcode = *((u8 *) obj->buffer.pointer);
-		if (eventcode == 0x4)
-			eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
-							 0);
-		key = hp_wmi_get_entry_by_scancode(eventcode);
-		if (key) {
-			switch (key->type) {
-			case KE_KEY:
-				input_report_key(hp_wmi_input_dev,
-						 key->keycode, 1);
-				input_sync(hp_wmi_input_dev);
-				input_report_key(hp_wmi_input_dev,
-						 key->keycode, 0);
-				input_sync(hp_wmi_input_dev);
-				break;
-			}
-		} else if (eventcode == 0x1) {
-			input_report_switch(hp_wmi_input_dev, SW_DOCK,
-					    hp_wmi_dock_state());
-			input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
-					    hp_wmi_tablet_state());
+	if (!obj || obj->type != ACPI_TYPE_BUFFER || obj->buffer.length != 8) {
+		printk(KERN_INFO "HP WMI: Unknown response received\n");
+		return;
+	}
+
+	eventcode = *((u8 *) obj->buffer.pointer);
+	if (eventcode == 0x4)
+		eventcode = hp_wmi_perform_query(HPWMI_HOTKEY_QUERY, 0,
+						0);
+	key = hp_wmi_get_entry_by_scancode(eventcode);
+	if (key) {
+		switch (key->type) {
+		case KE_KEY:
+			input_report_key(hp_wmi_input_dev,
+					 key->keycode, 1);
+			input_sync(hp_wmi_input_dev);
+			input_report_key(hp_wmi_input_dev,
+					 key->keycode, 0);
 			input_sync(hp_wmi_input_dev);
-		} else if (eventcode == 0x5) {
-			if (wifi_rfkill)
-				rfkill_set_sw_state(wifi_rfkill,
-						    hp_wmi_wifi_state());
-			if (bluetooth_rfkill)
-				rfkill_set_sw_state(bluetooth_rfkill,
-						    hp_wmi_bluetooth_state());
-			if (wwan_rfkill)
-				rfkill_set_sw_state(wwan_rfkill,
-						    hp_wmi_wwan_state());
-		} else
-			printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
-			       eventcode);
+			break;
+		}
+	} else if (eventcode == 0x1) {
+		input_report_switch(hp_wmi_input_dev, SW_DOCK,
+				    hp_wmi_dock_state());
+		input_report_switch(hp_wmi_input_dev, SW_TABLET_MODE,
+				    hp_wmi_tablet_state());
+		input_sync(hp_wmi_input_dev);
+	} else if (eventcode == 0x5) {
+		if (wifi_rfkill)
+			rfkill_set_states(wifi_rfkill,
+					  hp_wmi_get_sw_state(HPWMI_WIFI),
+					  hp_wmi_get_hw_state(HPWMI_WIFI));
+		if (bluetooth_rfkill)
+			rfkill_set_states(bluetooth_rfkill,
+					  hp_wmi_get_sw_state(HPWMI_BLUETOOTH),
+					  hp_wmi_get_hw_state(HPWMI_BLUETOOTH));
+		if (wwan_rfkill)
+			rfkill_set_states(wwan_rfkill,
+					  hp_wmi_get_sw_state(HPWMI_WWAN),
+					  hp_wmi_get_hw_state(HPWMI_WWAN));
 	} else
-		printk(KERN_INFO "HP WMI: Unknown response received\n");
+		printk(KERN_INFO "HP WMI: Unknown key pressed - %x\n",
+			eventcode);
 }
 
 static int __init hp_wmi_input_setup(void)
@@ -450,7 +454,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 		wifi_rfkill = rfkill_alloc("hp-wifi", &device->dev,
 					   RFKILL_TYPE_WLAN,
 					   &hp_wmi_rfkill_ops,
-					   (void *) 0);
+					   (void *) HPWMI_WIFI);
+		rfkill_init_sw_state(wifi_rfkill,
+				     hp_wmi_get_sw_state(HPWMI_WIFI));
+		rfkill_set_hw_state(wifi_rfkill,
+				    hp_wmi_get_hw_state(HPWMI_WIFI));
 		err = rfkill_register(wifi_rfkill);
 		if (err)
 			goto register_wifi_error;
@@ -460,7 +468,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 		bluetooth_rfkill = rfkill_alloc("hp-bluetooth", &device->dev,
 						RFKILL_TYPE_BLUETOOTH,
 						&hp_wmi_rfkill_ops,
-						(void *) 1);
+						(void *) HPWMI_BLUETOOTH);
+		rfkill_init_sw_state(bluetooth_rfkill,
+				     hp_wmi_get_sw_state(HPWMI_BLUETOOTH));
+		rfkill_set_hw_state(bluetooth_rfkill,
+				    hp_wmi_get_hw_state(HPWMI_BLUETOOTH));
 		err = rfkill_register(bluetooth_rfkill);
 		if (err)
 			goto register_bluetooth_error;
@@ -470,7 +482,11 @@ static int __init hp_wmi_bios_setup(struct platform_device *device)
 		wwan_rfkill = rfkill_alloc("hp-wwan", &device->dev,
 					   RFKILL_TYPE_WWAN,
 					   &hp_wmi_rfkill_ops,
-					   (void *) 2);
+					   (void *) HPWMI_WWAN);
+		rfkill_init_sw_state(wwan_rfkill,
+				     hp_wmi_get_sw_state(HPWMI_WWAN));
+		rfkill_set_hw_state(wwan_rfkill,
+				    hp_wmi_get_hw_state(HPWMI_WWAN));
 		err = rfkill_register(wwan_rfkill);
 		if (err)
 			goto register_wwan_err;
@@ -526,6 +542,19 @@ static int hp_wmi_resume_handler(struct platform_device *device)
 			    hp_wmi_tablet_state());
 	input_sync(hp_wmi_input_dev);
 
+	if (wifi_rfkill)
+		rfkill_set_states(wifi_rfkill,
+				  hp_wmi_get_sw_state(HPWMI_WIFI),
+				  hp_wmi_get_hw_state(HPWMI_WIFI));
+	if (bluetooth_rfkill)
+		rfkill_set_states(bluetooth_rfkill,
+				  hp_wmi_get_sw_state(HPWMI_BLUETOOTH),
+				  hp_wmi_get_hw_state(HPWMI_BLUETOOTH));
+	if (wwan_rfkill)
+		rfkill_set_states(wwan_rfkill,
+				  hp_wmi_get_sw_state(HPWMI_WWAN),
+				  hp_wmi_get_hw_state(HPWMI_WWAN));
+
 	return 0;
 }
 
-- 
1.6.3.2


             reply	other threads:[~2009-07-21 11:14 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-21 11:14 Alan Jenkins [this message]
2009-07-21 11:26 ` [PATCH] hp-wmi: improve rfkill support Matthew Garrett
2009-07-23 15:31 ` Maciej Rutecki
2009-07-23 18:27   ` Alan Jenkins
2009-07-23 19:36     ` Maciej Rutecki
2009-07-23 19:28 ` Frans Pop
2009-12-10  4:53 ` Len Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A65A2F9.1060509@tuffmail.co.uk \
    --to=alan-jenkins@tuffmail.co.uk \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maciej.rutecki@gmail.com \
    --cc=mjg@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox