public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Mike Rapoport <mike@compulab.co.il>
To: Felipe Balbi <me@felipebalbi.com>
Cc: linux-kernel@vger.kernel.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>,
	Liam Girdwood <lrg@slimlogic.co.uk>
Subject: Re: [PATCH] regulator: userspace: use sysfs_create_group
Date: Mon, 10 Aug 2009 08:20:34 +0300	[thread overview]
Message-ID: <4A7FAE22.80809@compulab.co.il> (raw)
In-Reply-To: <1249840885-13498-1-git-send-email-me@felipebalbi.com>



Felipe Balbi wrote:
> Signed-off-by: Felipe Balbi <me@felipebalbi.com>
> ---

NAK

>  drivers/regulator/userspace-consumer.c |   44 ++++++++++++++++----------------
>  1 files changed, 22 insertions(+), 22 deletions(-)
> 
> diff --git a/drivers/regulator/userspace-consumer.c b/drivers/regulator/userspace-consumer.c
> index 06d2fa9..a7e8e0b 100644
> --- a/drivers/regulator/userspace-consumer.c
> +++ b/drivers/regulator/userspace-consumer.c
> @@ -93,16 +93,20 @@ static ssize_t reg_set_state(struct device *dev, struct device_attribute *attr,
>  static DEVICE_ATTR(name, 0444, reg_show_name, NULL);
>  static DEVICE_ATTR(state, 0644, reg_show_state, reg_set_state);
>  
> -static struct device_attribute *attributes[] = {
> -	&dev_attr_name,
> -	&dev_attr_state,
> +static struct attribute *attributes[] = {
> +	&dev_attr_name.attr,
> +	&dev_attr_state.attr,

NULL?
Except that patch is Ok.

> +};
> +
> +static const struct attribute_group attr_group = {
> +	.attrs	= attributes,
>  };
>  
>  static int regulator_userspace_consumer_probe(struct platform_device *pdev)
>  {
>  	struct regulator_userspace_consumer_data *pdata;
>  	struct userspace_consumer_data *drvdata;
> -	int ret, i;
> +	int ret;
>  
>  	pdata = pdev->dev.platform_data;
>  	if (!pdata)
> @@ -125,31 +129,29 @@ static int regulator_userspace_consumer_probe(struct platform_device *pdev)
>  		goto err_alloc_supplies;
>  	}
>  
> -	for (i = 0; i < ARRAY_SIZE(attributes); i++) {
> -		ret = device_create_file(&pdev->dev, attributes[i]);
> -		if (ret != 0)
> -			goto err_create_attrs;
> -	}
> +	ret = sysfs_create_group(&pdev->dev.kobj, &attr_group);
> +	if (ret != 0)
> +		goto err_create_attrs;
>  
> -	if (pdata->init_on)
> +	if (pdata->init_on) {
>  		ret = regulator_bulk_enable(drvdata->num_supplies,
>  					    drvdata->supplies);
> -
> -	drvdata->enabled = pdata->init_on;
> -
> -	if (ret) {
> -		dev_err(&pdev->dev, "Failed to set initial state: %d\n", ret);
> -		goto err_create_attrs;
> +		if (ret) {
> +			dev_err(&pdev->dev,
> +				"Failed to set initial state: %d\n", ret);
> +			goto err_enable;
> +		}
>  	}
>  
> +	drvdata->enabled = pdata->init_on;
>  	platform_set_drvdata(pdev, drvdata);
>  
>  	return 0;
>  
> -err_create_attrs:
> -	for (i = 0; i < ARRAY_SIZE(attributes); i++)
> -		device_remove_file(&pdev->dev, attributes[i]);
> +err_enable:
> +	sysfs_remove_group(&pdev->dev.kobj, &attr_group);
>  
> +err_create_attrs:
>  	regulator_bulk_free(drvdata->num_supplies, drvdata->supplies);
>  
>  err_alloc_supplies:
> @@ -160,10 +162,8 @@ err_alloc_supplies:
>  static int regulator_userspace_consumer_remove(struct platform_device *pdev)
>  {
>  	struct userspace_consumer_data *data = platform_get_drvdata(pdev);
> -	int i;
>  
> -	for (i = 0; i < ARRAY_SIZE(attributes); i++)
> -		device_remove_file(&pdev->dev, attributes[i]);
> +	sysfs_remove_group(&pdev->dev.kobj, &attr_group);
>  
>  	if (data->enabled)
>  		regulator_bulk_disable(data->num_supplies, data->supplies);

-- 
Sincerely yours,
Mike.


  parent reply	other threads:[~2009-08-10  5:20 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-08-09 18:01 [PATCH] regulator: userspace: use sysfs_create_group Felipe Balbi
2009-08-09 18:24 ` Mark Brown
2009-08-10  5:20 ` Mike Rapoport [this message]
2009-08-10  6:06   ` Felipe Balbi
2009-08-10  6:30     ` Mike Rapoport
2009-08-10 17:33     ` Liam Girdwood

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4A7FAE22.80809@compulab.co.il \
    --to=mike@compulab.co.il \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@slimlogic.co.uk \
    --cc=me@felipebalbi.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox