[PATCH 6/9] ARM: Add nuc950 machine file support for nuc950 platform

[PATCH 6/9] ARM: Add nuc950 machine file support for nuc950 platform

[Wan ZongShun]

Dear Russell,

Add mach-nuc950.c support for nuc950 platform.

Signed-off-by: Wan ZongShun <mcuos.com@gmail.com>

---
 arch/arm/mach-w90x900/mach-nuc950evb.c |   61 ++++++++++++++++++++++++++++++++
 1 files changed, 61 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-w90x900/mach-nuc950evb.c

diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
new file mode 100644
index 0000000..b358c15
--- /dev/null
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -0,0 +1,61 @@
+/*
+ * linux/arch/arm/mach-w90x900/mach-nuc950evb.c
+ *
+ * Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
+ *
+ * Copyright (C) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/regs-serial.h>
+#include <mach/map.h>
+
+#include "nuc950.h"
+
+static void __init nuc950evb_map_io(void)
+{
+	nuc950_map_io();
+	nuc950_init_clocks();
+}
+
+static void __init nuc950evb_init(void)
+{
+	nuc950_board_init();
+}
+
+MACHINE_START(W90P950EVB, "W90P950EVB")
+	/* Maintainer: Wan ZongShun */
+	.phys_io	= W90X900_PA_UART,
+	.io_pg_offst	= (((u32)W90X900_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= 0,
+	.map_io		= nuc950evb_map_io,
+	.init_irq	= w90x900_init_irq,
+	.init_machine	= nuc950evb_init,
+	.timer		= &w90x900_timer,
+MACHINE_END
-- 
1.5.6.3