From: Breno Leitao <leitao@linux.vnet.ibm.com>
To: Wen Xiong <wenxiong@us.ibm.com>, scottk@digi.com
Cc: alan@lxorguk.ukuu.org.uk,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: jsm: Adding EEH handlers
Date: Fri, 11 Sep 2009 12:35:58 -0300 [thread overview]
Message-ID: <4AAA6E5E.9000900@linux.vnet.ibm.com> (raw)
Adding EEH handlers for the serial jsm driver. This patch adds
the PCI error handlers and also register them to be called when
a error is detected.
Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
---
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index b3604aa..b37d2e2 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -48,6 +48,20 @@ struct uart_driver jsm_uart_driver = {
.nr = NR_PORTS,
};
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev);
+static void jsm_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers jsm_err_handler = {
+ .error_detected = jsm_io_error_detected,
+ .slot_reset = jsm_io_slot_reset,
+ .resume = jsm_io_resume,
+};
+
int jsm_debug;
module_param(jsm_debug, int, 0);
MODULE_PARM_DESC(jsm_debug, "Driver debugging level");
@@ -164,6 +178,7 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
}
pci_set_drvdata(pdev, brd);
+ pci_save_state(pdev);
return 0;
out_free_irq:
@@ -222,8 +237,39 @@ static struct pci_driver jsm_driver = {
.id_table = jsm_pci_tbl,
.probe = jsm_probe_one,
.remove = __devexit_p(jsm_remove_one),
+ .err_handler = &jsm_err_handler,
};
+static pci_ers_result_t jsm_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct jsm_board *brd = pci_get_drvdata(pdev);
+
+ jsm_remove_uart_port(brd);
+
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+static pci_ers_result_t jsm_io_slot_reset(struct pci_dev *pdev)
+{
+ pci_enable_device(pdev);
+ pci_set_master(pdev);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+static void jsm_io_resume(struct pci_dev *pdev)
+{
+ struct jsm_board *brd = pci_get_drvdata(pdev);
+
+ pci_restore_state(pdev);
+
+ jsm_uart_port_init(brd);
+}
+
static int __init jsm_init_module(void)
{
int rc;
diff --git a/drivers/serial/jsm/jsm_tty.c b/drivers/serial/jsm/jsm_tty.c
index 00f4577..e70f2c1 100644
--- a/drivers/serial/jsm/jsm_tty.c
+++ b/drivers/serial/jsm/jsm_tty.c
@@ -432,7 +432,7 @@ int __devinit jsm_tty_init(struct jsm_board *brd)
return 0;
}
-int __devinit jsm_uart_port_init(struct jsm_board *brd)
+int jsm_uart_port_init(struct jsm_board *brd)
{
int i;
unsigned int line;
next reply other threads:[~2009-09-11 15:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-11 15:35 Breno Leitao [this message]
2009-09-28 19:06 ` Adding EEH handlers Kilau, Scott
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AAA6E5E.9000900@linux.vnet.ibm.com \
--to=leitao@linux.vnet.ibm.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=scottk@digi.com \
--cc=wenxiong@us.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox