From: "H. Peter Anvin" <hpa@zytor.com>
To: LKML <linux-kernel@vger.kernel.org>, Ingo Molnar <mingo@elte.hu>,
Thomas Gleixner <tglx@linutronix.de>,
Suresh Siddha <suresh.b.siddha@intel.com>
Subject: [RFC] x86-64: make compat_start_thread() match start_thread()
Date: Thu, 08 Oct 2009 18:09:37 -0700 [thread overview]
Message-ID: <4ACE8D51.1080606@zytor.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 103 bytes --]
[This is an RFC post; I intend to commit this tomorrow but I would
appreciate anyone looking over it.]
[-- Attachment #2: 0001-x86-64-make-compat_start_thread-match-start_threa.patch --]
[-- Type: text/x-patch, Size: 3232 bytes --]
>From c843d5b6bd5923b91359e4806f5fca905774b41f Mon Sep 17 00:00:00 2001
From: H. Peter Anvin <hpa@zytor.com>
Date: Thu, 8 Oct 2009 18:02:54 -0700
Subject: [PATCH] x86-64: make compat_start_thread() match start_thread()
For no real good reason, compat_start_thread() was embedded inline in
<asm/elf.h> whereas the native start_thread() lives in process_*.c.
Move compat_start_thread() to process_64.c, remove gratuitious
differences, and fix a few items which mostly look like bit rot.
In particular, compat_start_thread() didn't do free_thread_xstate(),
which means it was hanging on to the xstate store area even when it
was not needed. It was also not setting old_rsp, but it looks like
that generally shouldn't matter for a 32-bit process.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
---
arch/x86/include/asm/elf.h | 19 +------------------
arch/x86/kernel/process_64.c | 23 ++++++++++++++++++++++-
2 files changed, 23 insertions(+), 19 deletions(-)
diff --git a/arch/x86/include/asm/elf.h b/arch/x86/include/asm/elf.h
index 456a304..5a5d541 100644
--- a/arch/x86/include/asm/elf.h
+++ b/arch/x86/include/asm/elf.h
@@ -157,19 +157,6 @@ do { \
#define compat_elf_check_arch(x) elf_check_arch_ia32(x)
-static inline void start_ia32_thread(struct pt_regs *regs, u32 ip, u32 sp)
-{
- loadsegment(fs, 0);
- loadsegment(ds, __USER32_DS);
- loadsegment(es, __USER32_DS);
- load_gs_index(0);
- regs->ip = ip;
- regs->sp = sp;
- regs->flags = X86_EFLAGS_IF;
- regs->cs = __USER32_CS;
- regs->ss = __USER32_DS;
-}
-
static inline void elf_common_init(struct thread_struct *t,
struct pt_regs *regs, const u16 ds)
{
@@ -191,11 +178,7 @@ do { \
#define COMPAT_ELF_PLAT_INIT(regs, load_addr) \
elf_common_init(¤t->thread, regs, __USER_DS)
-#define compat_start_thread(regs, ip, sp) \
-do { \
- start_ia32_thread(regs, ip, sp); \
- set_fs(USER_DS); \
-} while (0)
+void compat_start_thread(struct pt_regs *regs, u32 new_ip, u32 new_sp);
#define COMPAT_SET_PERSONALITY(ex) \
do { \
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index ad535b6..ec223a8 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -356,7 +356,7 @@ start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
percpu_write(old_rsp, new_sp);
regs->cs = __USER_CS;
regs->ss = __USER_DS;
- regs->flags = 0x200;
+ regs->flags = X86_EFLAGS_IF;
set_fs(USER_DS);
/*
* Free the old FP and other extended state
@@ -365,6 +365,27 @@ start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp)
}
EXPORT_SYMBOL_GPL(start_thread);
+#ifdef CONFIG_IA32_EMULATION
+void compat_start_thread(struct pt_regs *regs, u32 new_ip, u32 new_sp)
+{
+ loadsegment(fs, 0);
+ loadsegment(ds, __USER32_DS);
+ loadsegment(es, __USER32_DS);
+ load_gs_index(0);
+ regs->ip = new_ip;
+ regs->sp = new_sp;
+ percpu_write(old_rsp, new_sp);
+ regs->cs = __USER32_CS;
+ regs->ss = __USER32_DS;
+ regs->flags = X86_EFLAGS_IF;
+ set_fs(USER_DS);
+ /*
+ * Free the old FP and other extended state
+ */
+ free_thread_xstate(current);
+}
+#endif
+
/*
* switch_to(x,y) should switch tasks from x to y.
*
--
1.6.2.5
next reply other threads:[~2009-10-09 1:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-09 1:09 H. Peter Anvin [this message]
2009-10-09 2:41 ` [RFC] x86-64: make compat_start_thread() match start_thread() Suresh Siddha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4ACE8D51.1080606@zytor.com \
--to=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox