From: "Anton D. Kachalov" <mouse@mayc.ru>
To: linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] binfmt_elf: FatELF support in the binary loader.
Date: Fri, 23 Oct 2009 13:49:14 +0400 [thread overview]
Message-ID: <4AE17C1A.4060009@mayc.ru> (raw)
[-- Attachment #1: Type: text/plain, Size: 237 bytes --]
I have made very similar patch but it's quite small and do not require
deep hacks.
It should works with "setarch" too to force selection of binary.
There is a tool to merge binaries. Glibc / binutils patch work in progress.
Rgds,
Anton
[-- Attachment #2: binfmt-truearch-mouse.patch --]
[-- Type: text/x-patch, Size: 3924 bytes --]
--- kernel-2.6.28-jaunty/fs/binfmt_elf.c.orig 2009-06-10 07:05:27.000000000 +0400
+++ kernel-2.6.28/fs/binfmt_elf.c 2009-09-29 14:46:39.008238197 +0400
@@ -571,6 +571,7 @@ static int load_elf_binary(struct linux_
unsigned long elf_bss, elf_brk;
int retval, i;
unsigned int size;
+ unsigned int offset;
unsigned long elf_entry;
unsigned long interp_load_addr = 0;
unsigned long start_code, end_code, start_data, end_data;
@@ -588,6 +589,8 @@ static int load_elf_binary(struct linux_
goto out_ret;
}
+ offset = 0;
+retry_elf:
/* Get the exec-header */
loc->elf_ex = *((struct elfhdr *)bprm->buf);
@@ -598,8 +601,27 @@ static int load_elf_binary(struct linux_
if (loc->elf_ex.e_type != ET_EXEC && loc->elf_ex.e_type != ET_DYN)
goto out;
- if (!elf_check_arch(&loc->elf_ex))
+#if (defined(__x86_64__) || defined(__powerpc64__) || defined(__s390x__)) \
+ && ELF_CLASS == ELFCLASS64
+ if (personality(current->personality) == PER_LINUX32)
goto out;
+#endif
+ if (!elf_check_arch(&loc->elf_ex)) {
+ offset = loc->elf_ex.e_ident[0xc]
+ | loc->elf_ex.e_ident[0xd] << 8
+ | loc->elf_ex.e_ident[0xe] << 16
+ | loc->elf_ex.e_ident[0xf] << 24;
+ if (offset != 0) {
+ memset(bprm->buf, 0, BINPRM_BUF_SIZE);
+ retval = kernel_read(bprm->file, offset, bprm->buf, BINPRM_BUF_SIZE);
+ if (retval != BINPRM_BUF_SIZE) {
+ retval = -ENOEXEC;
+ goto out;
+ }
+ goto retry_elf;
+ }
+ goto out;
+ }
if (!bprm->file->f_op||!bprm->file->f_op->mmap)
goto out;
@@ -723,13 +745,30 @@ static int load_elf_binary(struct linux_
/* Some simple consistency checks for the interpreter */
if (elf_interpreter) {
+ offset = 0;
+retry_interp:
retval = -ELIBBAD;
+ loc->interp_elf_ex = *((struct elfhdr *)bprm->buf);
/* Not an ELF interpreter */
if (memcmp(loc->interp_elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
goto out_free_dentry;
/* Verify the interpreter has a valid arch */
- if (!elf_check_arch(&loc->interp_elf_ex))
+ if (!elf_check_arch(&loc->interp_elf_ex)) {
+ offset = loc->interp_elf_ex.e_ident[0xc]
+ | loc->interp_elf_ex.e_ident[0xd] << 8
+ | loc->interp_elf_ex.e_ident[0xe] << 16
+ | loc->interp_elf_ex.e_ident[0xf] << 24;
+ if (offset != 0) {
+ memset(bprm->buf, 0, BINPRM_BUF_SIZE);
+ retval = kernel_read(bprm->file, offset, bprm->buf, BINPRM_BUF_SIZE);
+ if (retval != BINPRM_BUF_SIZE) {
+ retval = -ELIBBAD;
+ goto out;
+ }
+ goto retry_interp;
+ }
goto out_free_dentry;
+ }
} else {
/* Executables without an interpreter also need a personality */
SET_PERSONALITY(loc->elf_ex);
@@ -1026,18 +1065,42 @@ static int load_elf_library(struct file
unsigned long elf_bss, bss, len;
int retval, error, i, j;
struct elfhdr elf_ex;
+ unsigned int offset;
error = -ENOEXEC;
retval = kernel_read(file, 0, (char *)&elf_ex, sizeof(elf_ex));
if (retval != sizeof(elf_ex))
goto out;
+ offset = 0;
+retry_lib:
if (memcmp(elf_ex.e_ident, ELFMAG, SELFMAG) != 0)
goto out;
/* First of all, some simple consistency checks */
- if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
- !elf_check_arch(&elf_ex) || !file->f_op || !file->f_op->mmap)
+ if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2)
+ goto out;
+#if (defined(__x86_64__) || defined(__powerpc64__) || defined(__s390x__)) \
+ && ELF_CLASS == ELFCLASS64
+ if (personality(current->personality) == PER_LINUX32)
+ goto out;
+#endif
+ if (!elf_check_arch(&elf_ex)) {
+ offset = elf_ex.e_ident[0xc]
+ | elf_ex.e_ident[0xd] << 8
+ | elf_ex.e_ident[0xe] << 16
+ | elf_ex.e_ident[0xf] << 24;
+ if (offset != 0) {
+ retval = kernel_read(file, offset, (char *)&elf_ex, sizeof(elf_ex));
+ if (retval != sizeof(elf_ex)) {
+ retval = -ENOEXEC;
+ goto out;
+ }
+ goto retry_lib;
+ }
+ goto out;
+ }
+ if (!file->f_op || !file->f_op->mmap)
goto out;
/* Now read in all of the header information */
next reply other threads:[~2009-10-23 10:08 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-23 9:49 Anton D. Kachalov [this message]
2009-10-23 13:32 ` [PATCH 1/2] binfmt_elf: FatELF support in the binary loader Anton D. Kachalov
2009-10-24 0:20 ` Ryan C. Gordon
2009-10-24 9:00 ` Anton D. Kachalov
2009-10-24 18:14 ` Ryan C. Gordon
2009-10-26 6:03 ` Ryan C. Gordon
2009-10-30 2:22 ` Ryan C. Gordon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4AE17C1A.4060009@mayc.ru \
--to=mouse@mayc.ru \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox