* no video output after suspend after "drm/i915: force mode set at lid open time"
@ 2009-10-25 20:57 Riccardo Magliocchetti
2009-10-26 1:52 ` Peter Stuge
2009-10-26 16:05 ` Jesse Barnes
0 siblings, 2 replies; 14+ messages in thread
From: Riccardo Magliocchetti @ 2009-10-25 20:57 UTC (permalink / raw)
To: linux-kernel; +Cc: jbarnes, mjg, eric
[-- Attachment #1: Type: text/plain, Size: 3210 bytes --]
Hello,
i lost video output, screen stays black, after suspend after commit
c1c7af60892070e4b82ad63bbfb95ae745056de0 "drm/i915: force mode set at
lid open time".
I'm attaching my dmesg with 2.6.32-rc5 (actually
964fe080d94db82a3268443e9b9ece4c60246414), my bisect log and my config.
git bisect response:
c1c7af60892070e4b82ad63bbfb95ae745056de0 is the first bad commit
commit c1c7af60892070e4b82ad63bbfb95ae745056de0
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date: Thu Sep 10 15:28:03 2009 -0700
drm/i915: force mode set at lid open time
Some laptop platforms will disable pipes and/or planes at lid close
time
and not restore them when the lid is opened again. So catch the lid
event, and if the lid was opened, force a mode restore.
Fixes fdo bug #21230.
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
:040000 040000 6f98ad1bbd03f11c2b9eb1db8ec9bd0f8c92596c
e8860db5d490afe490ea66083c57a639874fcafa M drivers
lspci output:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series
Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset
Integrated Graphics Controller (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567V Gigabit Network
Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 03)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 (rev 03)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller
(rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI
Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller
(rev 03)
02:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
06:09.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
06:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro
Host Adapter (rev 21)
06:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff)
Please CC me since i'm not subscribed.
thanks,
riccardo
[-- Attachment #2: dmesg-2.6.32-rc5 --]
[-- Type: text/plain, Size: 46763 bytes --]
[ 0.000000] Linux version 2.6.32-rc5 (rm@montag) (gcc version 4.3.4 (Debian 4.3.4-5) ) #110 SMP PREEMPT Sun Oct 25 21:31:29 CET 2009
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc5 root=UUID=770e4e60-f57b-4299-a18d-ed558a68d750 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
[ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d6000 - 00000000000d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd6a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bd6a1000 - 00000000bd6a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6a7000 - 00000000bd7bd000 (usable)
[ 0.000000] BIOS-e820: 00000000bd7bd000 - 00000000bd80f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd80f000 - 00000000bd908000 (usable)
[ 0.000000] BIOS-e820: 00000000bd908000 - 00000000bdb0f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb0f000 - 00000000bdb19000 (usable)
[ 0.000000] BIOS-e820: 00000000bdb19000 - 00000000bdb1f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bdb1f000 - 00000000bdb64000 (usable)
[ 0.000000] BIOS-e820: 00000000bdb64000 - 00000000bdb9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bdb9f000 - 00000000bdc00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000bde00000 (reserved)
[ 0.000000] BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbdb64 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0BE000000 mask FFE000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bdb64000
[ 0.000000] 0000000000 - 00bda00000 page 2M
[ 0.000000] 00bda00000 - 00bdb64000 page 4k
[ 0.000000] kernel direct mapping tables up to bdb64000 @ 10000-15000
[ 0.000000] RAMDISK: 37c5c000 - 37fef5bd
[ 0.000000] ACPI: RSDP 00000000000f7150 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 00000000bdbf700e 00074 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bdbe7000 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000bdbe8000 07AE1 (v02 Intel CANTIGA 06040000 INTL 20050624)
[ 0.000000] ACPI: FACS 00000000bdb9efc0 00040
[ 0.000000] ACPI: HPET 00000000bdbfed86 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000bdbfedbe 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: APIC 00000000bdbfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bdbfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000bdbfee8a 00176 (v01 SECCSD LH43STAR 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000bdbf70aa 00093 (v01 BrtRef DD01BRT 00001000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bdbe6000 005F9 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bdbe5000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
[ 0.000000] ACPI: SSDT 00000000bdbe4000 0020F (v01 PmRef ApTst 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bdb64000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 000159bbe4] TEXT DATA BSS ==> [0001000000 - 000159bbe4]
[ 0.000000] #3 [0037c5c000 - 0037fef5bd] RAMDISK ==> [0037c5c000 - 0037fef5bd]
[ 0.000000] #4 [000009e400 - 0000100000] BIOS reserved ==> [000009e400 - 0000100000]
[ 0.000000] #5 [000159c000 - 000159c1e0] BRK ==> [000159c000 - 000159c1e0]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] found SMP MP-table at [ffff8800000f71f0] f71f0
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880001a00000-ffff8800043fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd6a1
[ 0.000000] 0: 0x000bd6a7 -> 0x000bd7bd
[ 0.000000] 0: 0x000bd80f -> 0x000bd908
[ 0.000000] 0: 0x000bdb0f -> 0x000bdb19
[ 0.000000] 0: 0x000bdb1f -> 0x000bdb64
[ 0.000000] On node 0 totalpages: 776333
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3823 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10568 pages used for memmap
[ 0.000000] DMA32 zone: 761783 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d6000
[ 0.000000] PM: Registered nosave memory: 00000000000d6000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd6a1000 - 00000000bd6a7000
[ 0.000000] PM: Registered nosave memory: 00000000bd7bd000 - 00000000bd80f000
[ 0.000000] PM: Registered nosave memory: 00000000bd908000 - 00000000bdb0f000
[ 0.000000] PM: Registered nosave memory: 00000000bdb19000 - 00000000bdb1f000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880001600000 s78552 r8192 d23848 u1048576
[ 0.000000] pcpu-alloc: s78552 r8192 d23848 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 765606
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-rc5 root=UUID=770e4e60-f57b-4299-a18d-ed558a68d750 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3045620k/3108240k available (2852k kernel code, 2908k absent, 58980k reserved, 1845k data, 408k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:320
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1994.921 MHz processor.
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.84 BogoMIPS (lpj=7979684)
[ 0.004054] Security Framework initialized
[ 0.004076] Mount-cache hash table entries: 256
[ 0.004210] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004213] CPU: L2 cache: 3072K
[ 0.004215] CPU: Physical Processor ID: 0
[ 0.004217] CPU: Processor Core ID: 0
[ 0.004219] mce: CPU supports 6 MCE banks
[ 0.004227] CPU0: Thermal monitoring enabled (TM2)
[ 0.004230] using mwait in idle threads.
[ 0.004232] Performance Events: Core2 events, Intel PMU driver.
[ 0.004238] ... version: 2
[ 0.004239] ... bit width: 40
[ 0.004241] ... generic registers: 2
[ 0.004242] ... value mask: 000000ffffffffff
[ 0.004244] ... max period: 000000007fffffff
[ 0.004246] ... fixed-purpose events: 3
[ 0.004247] ... event mask: 0000000700000003
[ 0.004265] ACPI: Core revision 20090903
[ 0.020063] Setting APIC routing to flat
[ 0.020405] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061893] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
[ 0.064001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] Calibrating delay using timer specific routine.. 3989.98 BogoMIPS (lpj=7979964)
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 3072K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] mce: CPU supports 6 MCE banks
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.148066] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
[ 0.148074] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.152027] Brought up 2 CPUs
[ 0.152029] Total of 2 processors activated (7979.82 BogoMIPS).
[ 0.152576] CPU0 attaching sched-domain:
[ 0.152579] domain 0: span 0-1 level MC
[ 0.152581] groups: 0 1
[ 0.152587] CPU1 attaching sched-domain:
[ 0.152589] domain 0: span 0-1 level MC
[ 0.152591] groups: 1 0
[ 0.156241] NET: Registered protocol family 16
[ 0.156270] ACPI: bus type pci registered
[ 0.156270] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.156270] PCI: MCFG area at e0000000 reserved in E820
[ 0.169427] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.169429] PCI: Using configuration type 1 for base access
[ 0.169490] bio: create slab <bio-0> at 0
[ 0.173006] ACPI: EC: Look up EC in DSDT
[ 0.177003] ACPI: BIOS _OSI(Linux) query ignored
[ 0.180163] ACPI: Interpreter enabled
[ 0.180163] ACPI: (supports S0 S3 S4 S5)
[ 0.180163] ACPI: Using IOAPIC for interrupt routing
[ 0.180251] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function
[ 0.188281] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.188281] ACPI: Power Resource [FN00] (off)
[ 0.188281] ACPI: Power Resource [FN01] (off)
[ 0.188687] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.189298] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.189343] pci 0000:00:02.0: reg 10 64bit mmio: [0xf8000000-0xf83fffff]
[ 0.189343] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.189343] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[ 0.189343] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8400000-0xf84fffff]
[ 0.189343] pci 0000:00:19.0: reg 10 32bit mmio: [0xf8600000-0xf861ffff]
[ 0.189343] pci 0000:00:19.0: reg 14 32bit mmio: [0xf8624000-0xf8624fff]
[ 0.189343] pci 0000:00:19.0: reg 18 io port: [0x1820-0x183f]
[ 0.189343] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.189343] pci 0000:00:19.0: PME# disabled
[ 0.189343] pci 0000:00:1a.0: reg 20 io port: [0x1840-0x185f]
[ 0.189343] pci 0000:00:1a.1: reg 20 io port: [0x1860-0x187f]
[ 0.189343] pci 0000:00:1a.2: reg 20 io port: [0x1880-0x189f]
[ 0.189343] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf8825800-0xf8825bff]
[ 0.192055] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.192061] pci 0000:00:1a.7: PME# disabled
[ 0.192120] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf8620000-0xf8623fff]
[ 0.192183] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.192188] pci 0000:00:1b.0: PME# disabled
[ 0.192282] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.192287] pci 0000:00:1c.0: PME# disabled
[ 0.192379] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.192384] pci 0000:00:1c.2: PME# disabled
[ 0.192477] pci 0000:00:1d.0: reg 20 io port: [0x18a0-0x18bf]
[ 0.192581] pci 0000:00:1d.1: reg 20 io port: [0x18c0-0x18df]
[ 0.192671] pci 0000:00:1d.2: reg 20 io port: [0x18e0-0x18ff]
[ 0.192767] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf8825c00-0xf8825fff]
[ 0.192838] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.192843] pci 0000:00:1d.7: PME# disabled
[ 0.193101] pci 0000:00:1f.2: reg 10 io port: [0x1818-0x181f]
[ 0.193109] pci 0000:00:1f.2: reg 14 io port: [0x180c-0x180f]
[ 0.193117] pci 0000:00:1f.2: reg 18 io port: [0x1810-0x1817]
[ 0.193126] pci 0000:00:1f.2: reg 1c io port: [0x1808-0x180b]
[ 0.193134] pci 0000:00:1f.2: reg 20 io port: [0x1c00-0x1c1f]
[ 0.193142] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf8825000-0xf88257ff]
[ 0.193191] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.193195] pci 0000:00:1f.2: PME# disabled
[ 0.193236] pci 0000:00:1f.3: reg 10 64bit mmio: [0x000000-0x0000ff]
[ 0.193256] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f]
[ 0.193404] pci 0000:02:00.0: reg 10 64bit mmio: [0xf4000000-0xf4001fff]
[ 0.193519] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.193530] pci 0000:02:00.0: PME# disabled
[ 0.193613] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.193618] pci 0000:00:1c.0: bridge 32bit mmio: [0xf4000000-0xf5ffffff]
[ 0.193627] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf0000000-0xf1ffffff]
[ 0.193689] pci 0000:00:1c.2: bridge io port: [0x3000-0x3fff]
[ 0.193694] pci 0000:00:1c.2: bridge 32bit mmio: [0xf6000000-0xf7ffffff]
[ 0.193702] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf2000000-0xf3ffffff]
[ 0.193758] pci 0000:06:09.0: reg 10 32bit mmio: [0xf8500000-0xf8500fff]
[ 0.193780] pci 0000:06:09.0: supports D1 D2
[ 0.193782] pci 0000:06:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193787] pci 0000:06:09.0: PME# disabled
[ 0.193829] pci 0000:06:09.1: reg 10 32bit mmio: [0xf8501000-0xf85010ff]
[ 0.193888] pci 0000:06:09.1: supports D1 D2
[ 0.193890] pci 0000:06:09.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.193895] pci 0000:06:09.1: PME# disabled
[ 0.193936] pci 0000:06:09.2: reg 10 32bit mmio: [0xf8501400-0xf85014ff]
[ 0.193994] pci 0000:06:09.2: supports D1 D2
[ 0.193996] pci 0000:06:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.194001] pci 0000:06:09.2: PME# disabled
[ 0.194055] pci 0000:00:1e.0: transparent bridge
[ 0.194062] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8500000-0xf85fffff]
[ 0.194107] pci_bus 0000:00: on NUMA node 0
[ 0.194114] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.194378] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.194527] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.194620] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.209386] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
[ 0.209386] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
[ 0.209386] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
[ 0.209386] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
[ 0.209386] ACPI: PCI Interrupt Link [LNKE] (IRQs *11)
[ 0.209386] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
[ 0.209386] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
[ 0.209386] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
[ 0.209386] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.209386] vgaarb: loaded
[ 0.209386] SCSI subsystem initialized
[ 0.212024] libata version 3.00 loaded.
[ 0.212064] usbcore: registered new interface driver usbfs
[ 0.212064] usbcore: registered new interface driver hub
[ 0.212064] usbcore: registered new device driver usb
[ 0.212073] PCI: Using ACPI for IRQ routing
[ 0.212225] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.212225] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.216021] Switching to clocksource tsc
[ 0.225285] pnp: PnP ACPI init
[ 0.225296] ACPI: bus type pnp registered
[ 0.228485] pnp: PnP ACPI: found 12 devices
[ 0.228487] ACPI: ACPI bus type pnp unregistered
[ 0.228498] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.228505] system 00:05: ioport range 0x680-0x69f has been reserved
[ 0.228508] system 00:05: ioport range 0x480-0x48f has been reserved
[ 0.228512] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.228515] system 00:05: ioport range 0xffff-0xffff has been reserved
[ 0.228518] system 00:05: ioport range 0x400-0x47f has been reserved
[ 0.228521] system 00:05: ioport range 0x480-0x48f has been reserved
[ 0.228524] system 00:05: ioport range 0x1180-0x11ff has been reserved
[ 0.228527] system 00:05: ioport range 0x164e-0x164f has been reserved
[ 0.228530] system 00:05: ioport range 0x5000-0x500f has been reserved
[ 0.228533] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.228539] system 00:06: ioport range 0x6a0-0x6af has been reserved
[ 0.228541] system 00:06: ioport range 0x6b0-0x6ff has been reserved
[ 0.228549] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.228552] system 00:0b: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.228555] system 00:0b: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.228558] system 00:0b: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.228561] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.228564] system 00:0b: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.228568] system 00:0b: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.228571] system 00:0b: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.236558] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.236562] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.236569] pci 0000:00:1c.0: MEM window: 0xf4000000-0xf5ffffff
[ 0.236574] pci 0000:00:1c.0: PREFETCH window: 0x000000c4000000-0x000000c41fffff
[ 0.236582] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.236586] pci 0000:00:1c.2: IO window: 0x3000-0x3fff
[ 0.236592] pci 0000:00:1c.2: MEM window: 0xc4200000-0xc43fffff
[ 0.236597] pci 0000:00:1c.2: PREFETCH window: 0x000000c4400000-0x000000c45fffff
[ 0.236608] pci 0000:06:09.0: CardBus bridge, secondary bus 0000:07
[ 0.236610] pci 0000:06:09.0: IO window: 0x004000-0x0040ff
[ 0.236615] pci 0000:06:09.0: IO window: 0x004400-0x0044ff
[ 0.236620] pci 0000:06:09.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.236625] pci 0000:06:09.0: MEM window: 0xc8000000-0xcbffffff
[ 0.236630] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.236634] pci 0000:00:1e.0: IO window: 0x4000-0x4fff
[ 0.236640] pci 0000:00:1e.0: MEM window: 0xf8500000-0xf85fffff
[ 0.236645] pci 0000:00:1e.0: PREFETCH window: 0xc0000000-0xc3ffffff
[ 0.236660] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.236666] pci 0000:00:1c.0: setting latency timer to 64
[ 0.236676] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.236681] pci 0000:00:1c.2: setting latency timer to 64
[ 0.236689] pci 0000:00:1e.0: setting latency timer to 64
[ 0.236741] pci 0000:06:09.0: power state changed by ACPI to D0
[ 0.236748] pci 0000:06:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.236755] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.236757] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.236760] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.236763] pci_bus 0000:02: resource 1 mem: [0xf4000000-0xf5ffffff]
[ 0.236765] pci_bus 0000:02: resource 2 pref mem [0xc4000000-0xc41fffff]
[ 0.236768] pci_bus 0000:04: resource 0 io: [0x3000-0x3fff]
[ 0.236770] pci_bus 0000:04: resource 1 mem: [0xc4200000-0xc43fffff]
[ 0.236773] pci_bus 0000:04: resource 2 pref mem [0xc4400000-0xc45fffff]
[ 0.236775] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
[ 0.236778] pci_bus 0000:06: resource 1 mem: [0xf8500000-0xf85fffff]
[ 0.236780] pci_bus 0000:06: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.236783] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.236785] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.236788] pci_bus 0000:07: resource 0 io: [0x4000-0x40ff]
[ 0.236790] pci_bus 0000:07: resource 1 io: [0x4400-0x44ff]
[ 0.236793] pci_bus 0000:07: resource 2 pref mem [0xc0000000-0xc3ffffff]
[ 0.236795] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
[ 0.236849] NET: Registered protocol family 2
[ 0.236943] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.237552] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.239380] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.239914] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.239917] TCP reno registered
[ 0.240067] NET: Registered protocol family 1
[ 0.240090] pci 0000:00:02.0: Boot video device
[ 0.240300] Unpacking initramfs...
[ 0.324257] Freeing initrd memory: 3661k freed
[ 0.325702] Simple Boot Flag at 0x37 set to 0x1
[ 0.326827] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.326951] VFS: Disk quotas dquot_6.5.2
[ 0.326987] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.327090] msgmni has been set to 5957
[ 0.328078] alg: No test for stdrng (krng)
[ 0.328132] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.328135] io scheduler noop registered
[ 0.328151] io scheduler cfq registered (default)
[ 0.328334] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.328346] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.328582] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X
[ 0.328593] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.332002] Linux agpgart interface v0.103
[ 0.332005] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.332152] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.332653] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.332984] ahci 0000:00:1f.2: version 3.0
[ 0.333003] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.333043] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 0.333095] ahci: SSS flag set, parallel bus scan disabled
[ 0.333133] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 0.333137] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.333143] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.356119] scsi0 : ahci
[ 0.356244] scsi1 : ahci
[ 0.356336] scsi2 : ahci
[ 0.356430] scsi3 : ahci
[ 0.356523] scsi4 : ahci
[ 0.356617] scsi5 : ahci
[ 0.356708] ata1: SATA max UDMA/133 abar m2048@0xf8825000 port 0xf8825100 irq 26
[ 0.356712] ata2: SATA max UDMA/133 abar m2048@0xf8825000 port 0xf8825180 irq 26
[ 0.356714] ata3: DUMMY
[ 0.356716] ata4: DUMMY
[ 0.356718] ata5: SATA max UDMA/133 abar m2048@0xf8825000 port 0xf8825300 irq 26
[ 0.356722] ata6: SATA max UDMA/133 abar m2048@0xf8825000 port 0xf8825380 irq 26
[ 0.356965] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.359356] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 0.360788] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.360794] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.360797] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.360801] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.360803] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.360955] mice: PS/2 mouse device common for all mice
[ 0.360994] Driver 'rtc_cmos' needs updating - please use bus_type methods
[ 0.361128] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.361159] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.361198] cpuidle: using governor ladder
[ 0.361200] cpuidle: using governor menu
[ 0.361257] oprofile: using NMI interrupt.
[ 0.361581] TCP cubic registered
[ 0.361584] NET: Registered protocol family 17
[ 0.362229] rtc_cmos 00:07: setting system clock to 2009-10-25 20:33:40 UTC (1256502820)
[ 0.429518] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.676007] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.677386] ata1.00: ATA-8: Hitachi HTS543216L9A300, FB2OC40C, max UDMA/133
[ 0.677389] ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 0.679058] ata1.00: configured for UDMA/133
[ 0.692179] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
[ 0.692395] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.692425] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.692443] sd 0:0:0:0: [sda] Write Protect is off
[ 0.692446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.692470] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.692603] sda: sda1 sda2 sda3
[ 0.728310] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.416019] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.416885] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC03, max UDMA/100, ATAPI AN
[ 1.416900] ata2.00: applying bridge limits
[ 1.418312] ata2.00: configured for UDMA/100
[ 1.434456] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A SC03 PQ: 0 ANSI: 5
[ 1.441238] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.441241] Uniform CD-ROM driver Revision: 3.20
[ 1.441346] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.441428] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.760017] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.096016] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.112023] Freeing unused kernel memory: 408k freed
[ 2.158260] fan PNP0C0B:00: registered as cooling_device0
[ 2.158267] ACPI: Fan [FAN0] (off)
[ 2.158386] fan PNP0C0B:01: registered as cooling_device1
[ 2.158392] ACPI: Fan [FAN1] (off)
[ 2.161567] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.161575] ACPI: Thermal Zone [TZ00] (44 C)
[ 2.162336] thermal LNXTHERM:02: registered as thermal_zone1
[ 2.162344] ACPI: Thermal Zone [TZ01] (44 C)
[ 2.192651] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 2.192740] ACPI: Lid Switch [LID0]
[ 2.192793] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 2.192804] ACPI: Power Button [PWRB]
[ 2.192853] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 2.192857] ACPI: Sleep Button [SLPB]
[ 2.192908] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 2.192912] ACPI: Power Button [PWRF]
[ 2.238100] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.238135] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.238156] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 2.238160] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 2.238167] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.238201] ehci_hcd 0000:00:1a.7: debug port 1
[ 2.277244] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 2.277266] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf8825800
[ 2.278252] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.278523] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 2.278525] ricoh-mmc: Copyright(c) Philip Langdale
[ 2.278545] ricoh-mmc: Ricoh MMC controller found at 0000:06:09.2 [1180:0843] (rev 11)
[ 2.278566] ricoh-mmc: Controller is now disabled.
[ 2.286544] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 2.286548] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 2.294077] sdhci: Secure Digital Host Controller Interface driver
[ 2.294080] sdhci: Copyright(c) Pierre Ossman
[ 2.295129] sdhci-pci 0000:06:09.1: SDHCI controller found [1180:0822] (rev 21)
[ 2.295213] sdhci-pci 0000:06:09.1: power state changed by ACPI to D0
[ 2.295223] sdhci-pci 0000:06:09.1: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.295248] sdhci-pci 0000:06:09.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 2.295254] sdhci-pci 0000:06:09.1: setting latency timer to 64
[ 2.295298] Registered led device: mmc0::
[ 2.295333] mmc0: SDHCI controller on PCI [0000:06:09.1] using DMA
[ 2.300034] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.300060] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.300063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.300065] usb usb1: Product: EHCI Host Controller
[ 2.300067] usb usb1: Manufacturer: Linux 2.6.32-rc5 ehci_hcd
[ 2.300069] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.300150] usb usb1: configuration #1 chosen from 1 choice
[ 2.300186] hub 1-0:1.0: USB hub found
[ 2.300194] hub 1-0:1.0: 6 ports detected
[ 2.300281] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 2.301290] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[ 2.304491] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.304600] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.304610] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.304614] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 2.304621] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[ 2.304665] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001840
[ 2.304708] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.304711] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.304713] usb usb2: Product: UHCI Host Controller
[ 2.304715] usb usb2: Manufacturer: Linux 2.6.32-rc5 uhci_hcd
[ 2.304717] usb usb2: SerialNumber: 0000:00:1a.0
[ 2.304767] usb usb2: configuration #1 chosen from 1 choice
[ 2.304800] hub 2-0:1.0: USB hub found
[ 2.304808] hub 2-0:1.0: 2 ports detected
[ 2.304945] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.304953] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.305072] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 2.413269] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:13:77:b0:eb:01
[ 2.413272] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.413301] 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: ffffff-0ff
[ 2.413334] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.413353] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.413357] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.413364] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
[ 2.413396] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.417286] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 2.417304] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8825c00
[ 2.436008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.436030] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.436033] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.436035] usb usb3: Product: EHCI Host Controller
[ 2.436039] usb usb3: Manufacturer: Linux 2.6.32-rc5 ehci_hcd
[ 2.436041] usb usb3: SerialNumber: 0000:00:1d.7
[ 2.436111] usb usb3: configuration #1 chosen from 1 choice
[ 2.436152] hub 3-0:1.0: USB hub found
[ 2.436161] hub 3-0:1.0: 6 ports detected
[ 2.436283] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 2.436296] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 2.436302] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 2.436310] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 2.436362] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001860
[ 2.436400] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.436402] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.436405] usb usb4: Product: UHCI Host Controller
[ 2.436407] usb usb4: Manufacturer: Linux 2.6.32-rc5 uhci_hcd
[ 2.436409] usb usb4: SerialNumber: 0000:00:1a.1
[ 2.436455] usb usb4: configuration #1 chosen from 1 choice
[ 2.436482] hub 4-0:1.0: USB hub found
[ 2.436488] hub 4-0:1.0: 2 ports detected
[ 2.436556] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 2.436563] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 2.436566] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 2.436572] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 2.436598] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001880
[ 2.436632] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.436635] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.436637] usb usb5: Product: UHCI Host Controller
[ 2.436639] usb usb5: Manufacturer: Linux 2.6.32-rc5 uhci_hcd
[ 2.436641] usb usb5: SerialNumber: 0000:00:1a.2
[ 2.436685] usb usb5: configuration #1 chosen from 1 choice
[ 2.436711] hub 5-0:1.0: USB hub found
[ 2.436717] hub 5-0:1.0: 2 ports detected
[ 2.436782] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.436789] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.436792] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.436797] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 2.436824] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000018a0
[ 2.436858] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.436860] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.436863] usb usb6: Product: UHCI Host Controller
[ 2.436865] usb usb6: Manufacturer: Linux 2.6.32-rc5 uhci_hcd
[ 2.436867] usb usb6: SerialNumber: 0000:00:1d.0
[ 2.436911] usb usb6: configuration #1 chosen from 1 choice
[ 2.436938] hub 6-0:1.0: USB hub found
[ 2.436945] hub 6-0:1.0: 2 ports detected
[ 2.437016] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.437023] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.437026] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.437033] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 2.437059] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018c0
[ 2.437093] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.437096] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.437098] usb usb7: Product: UHCI Host Controller
[ 2.437100] usb usb7: Manufacturer: Linux 2.6.32-rc5 uhci_hcd
[ 2.437102] usb usb7: SerialNumber: 0000:00:1d.1
[ 2.437145] usb usb7: configuration #1 chosen from 1 choice
[ 2.437173] hub 7-0:1.0: USB hub found
[ 2.437179] hub 7-0:1.0: 2 ports detected
[ 2.437242] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.437248] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.437252] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.437257] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 2.437283] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018e0
[ 2.437318] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.437320] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.437323] usb usb8: Product: UHCI Host Controller
[ 2.437325] usb usb8: Manufacturer: Linux 2.6.32-rc5 uhci_hcd
[ 2.437327] usb usb8: SerialNumber: 0000:00:1d.2
[ 2.437371] usb usb8: configuration #1 chosen from 1 choice
[ 2.437398] hub 8-0:1.0: USB hub found
[ 2.437404] hub 8-0:1.0: 2 ports detected
[ 2.556461] PM: Starting manual resume from disk
[ 2.608015] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 2.611735] kjournald starting. Commit interval 5 seconds
[ 2.611740] EXT3-fs: mounted filesystem with writeback data mode.
[ 3.193518] usb 1-3: New USB device found, idVendor=174f, idProduct=5931
[ 3.193521] usb 1-3: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[ 3.193524] usb 1-3: Product: USB2.0 UVC PC Camera
[ 3.193526] usb 1-3: Manufacturer: Syntek
[ 3.193528] usb 1-3: SerialNumber: 0001
[ 3.193606] usb 1-3: configuration #1 chosen from 1 choice
[ 3.616012] usb 4-2: new full speed USB device using uhci_hcd and address 2
[ 3.779451] usb 4-2: New USB device found, idVendor=08ff, idProduct=1600
[ 3.779454] usb 4-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.779459] usb 4-2: Product: Fingerprint Sensor
[ 3.779547] usb 4-2: configuration #1 chosen from 1 choice
[ 4.020013] usb 6-2: new low speed USB device using uhci_hcd and address 2
[ 4.160556] udev: starting version 146
[ 4.196929] usb 6-2: New USB device found, idVendor=046d, idProduct=c052
[ 4.196932] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.196938] usb 6-2: Product: USB Laser Mouse
[ 4.196940] usb 6-2: Manufacturer: Logitech
[ 4.197036] usb 6-2: configuration #1 chosen from 1 choice
[ 4.410705] usbcore: registered new interface driver hiddev
[ 4.425233] input: Logitech USB Laser Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input5
[ 4.425299] generic-usb 0003:046D:C052.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB Laser Mouse] on usb-0000:00:1d.0-2/input0
[ 4.425322] usbcore: registered new interface driver usbhid
[ 4.425325] usbhid: v2.6:USB HID core driver
[ 4.501624] ACPI: AC Adapter [ADP1] (on-line)
[ 4.542659] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 4.704567] Linux video capture interface: v2.00
[ 4.712238] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera (174f:5931)
[ 4.737869] ACPI: SSDT 00000000bdb1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 4.738605] ACPI: SSDT 00000000bdb19020 00C78 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 4.741450] Monitor-Mwait will be used to enter C-1 state
[ 4.741475] Monitor-Mwait will be used to enter C-2 state
[ 4.741496] Monitor-Mwait will be used to enter C-3 state
[ 4.741504] Marking TSC unstable due to TSC halts in idle
[ 4.741528] Switching to clocksource hpet
[ 4.742025] processor LNXCPU:00: registered as cooling_device2
[ 4.742539] ACPI: SSDT 00000000bdb1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 4.742977] ACPI: SSDT 00000000bdb1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 4.744889] processor LNXCPU:01: registered as cooling_device3
[ 4.754210] ACPI: Battery Slot [BAT1] (battery present)
[ 4.766846] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround.
[ 4.785415] usbcore: registered new interface driver uvcvideo
[ 4.785418] USB Video Class driver (v0.1.0)
[ 4.799363] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[ 4.799369] ACPI: I/O resource 0000:00:1f.3 [0x1c20-0x1c3f] conflicts with ACPI region SMBI [0x1c20-0x1c2f]
[ 4.799426] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.868043] yenta_cardbus 0000:06:09.0: CardBus bridge found [144d:c045]
[ 4.997835] yenta_cardbus 0000:06:09.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 4.997839] yenta_cardbus 0000:06:09.0: Socket status: 30000006
[ 4.997843] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #07 to #0a
[ 4.997850] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[ 4.997853] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0xf8500000 - 0xf85fffff
[ 4.997858] yenta_cardbus 0000:06:09.0: pcmcia: parent PCI bridge Memory window: 0xc0000000 - 0xc3ffffff
[ 5.502704] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: 0xa04711/0xa00000
[ 5.537129] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
[ 5.818121] cfg80211: Calling CRDA to update world regulatory domain
[ 5.818164] cfg80211: Calling CRDA for country: EU
[ 6.250164] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 6.250167] iwlagn: Copyright(c) 2003-2009 Intel Corporation
[ 6.250252] iwlagn 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.250282] iwlagn 0000:02:00.0: setting latency timer to 64
[ 6.250334] iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[ 6.289758] iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 6.289837] iwlagn 0000:02:00.0: irq 28 for MSI/MSI-X
[ 6.510397] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.602346] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.602382] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.759051] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 7.752740] Adding 1992052k swap on /dev/sda3. Priority:-1 extents:1 across:1992052k
[ 7.871957] EXT3 FS on sda1, internal journal
[ 7.996442] loop: module loaded
[ 8.684019] kjournald starting. Commit interval 5 seconds
[ 8.684291] EXT3 FS on sda2, internal journal
[ 8.684296] EXT3-fs: mounted filesystem with writeback data mode.
[ 10.284255] fuse init (API version 7.13)
[ 10.829320] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 10.885089] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[ 14.717344] [drm] Initialized drm 1.1.0 20060810
[ 14.886511] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 14.886516] i915 0000:00:02.0: setting latency timer to 64
[ 14.905061] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 14.905069] [drm] set up 31M of stolen space
[ 15.033252] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-B
[ 15.043984] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-C
[ 15.049481] [drm:intel_dp_i2c_init] *ERROR* i2c_init DPDDC-D
[ 15.634908] [drm] TV-24: set mode NTSC 480i 0
[ 15.737235] NET: Registered protocol family 10
[ 15.737802] lo: Disabled Privacy Extensions
[ 15.738320] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.778450] fb0: inteldrmfb frame buffer device
[ 15.778453] registered panic notifier
[ 15.779968] ACPI Warning: _BQC returned an invalid level (20090903/video-631)
[ 15.780919] acpi device:08: registered as cooling_device4
[ 15.781447] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9
[ 15.781515] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 15.782710] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 15.950348] Console: switching to colour frame buffer device 160x50
[ 16.050993] [drm] LVDS-8: set mode 1280x800 27
[ 16.645944] [drm] TV-24: set mode NTSC 480i 0
[ 16.826112] [drm] TV-24: set mode NTSC 480i 0
[ 17.278384] [drm] TV-24: set mode NTSC 480i 0
[ 17.458543] [drm] TV-24: set mode NTSC 480i 0
[ 24.866809] iwlagn 0000:02:00.0: firmware: requesting iwlwifi-5000-2.ucode
[ 24.927609] iwlagn 0000:02:00.0: loaded firmware version 8.24.2.12
[ 25.079467] Registered led device: iwl-phy0::radio
[ 25.079826] Registered led device: iwl-phy0::assoc
[ 25.080192] Registered led device: iwl-phy0::RX
[ 25.080499] Registered led device: iwl-phy0::TX
[ 25.098415] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.154034] [drm] TV-24: set mode NTSC 480i 0
[ 39.295623] [drm] TV-24: set mode NTSC 480i 0
[ 53.506733] [drm] TV-24: set mode NTSC 480i 0
[ 53.648346] [drm] TV-24: set mode NTSC 480i 0
[ 62.415446] wlan0: deauthenticating from 00:01:e3:ad:f6:b8 by local choice (reason=3)
[ 62.415600] wlan0: direct probe to AP 00:01:e3:ad:f6:b8 (try 1)
[ 62.420498] wlan0: direct probe responded
[ 62.420506] wlan0: authenticate with AP 00:01:e3:ad:f6:b8 (try 1)
[ 62.422524] wlan0: authenticated
[ 62.422557] wlan0: associate with AP 00:01:e3:ad:f6:b8 (try 1)
[ 62.426377] wlan0: RX AssocResp from 00:01:e3:ad:f6:b8 (capab=0x431 status=0 aid=1)
[ 62.426384] wlan0: associated
[ 62.433440] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 72.804042] wlan0: no IPv6 routers present
[ 98.972153] Monitor-Mwait will be used to enter C-3 state
[-- Attachment #3: bisect.log --]
[-- Type: text/x-log, Size: 138 bytes --]
7f3591cfacf2d79c4f42238e46c7d053da8e020d good
47ea421af7479b90c481c94826f1c716fcf672cf good
947ec0b0c1e7e80eef4fe64f7763a06d0cf04d2e good
[-- Attachment #4: config-2.6.32-rc5 --]
[-- Type: text/plain, Size: 66459 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.32-rc5
# Sun Oct 25 21:23:27 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
# CONFIG_PERF_COUNTERS is not set
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_IBS is not set
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
# CONFIG_SPARSE_IRQ is not set
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
# CONFIG_KVM_CLOCK is not set
# CONFIG_KVM_GUEST is not set
# CONFIG_PARAVIRT is not set
# CONFIG_PARAVIRT_CLOCK is not set
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
# CONFIG_ACPI_POWER_METER is not set
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=m
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_INTR_REMAP=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_NETLABEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_OSF=m
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
CONFIG_CFG80211_DEFAULT_PS_VALUE=1
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not set
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_PATA_ACPI=m
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_SCH=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# See the help texts for more information.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=y
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLAGN=m
# CONFIG_IWL4965 is not set
CONFIG_IWL5000=y
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
# CONFIG_WL12XX is not set
# CONFIG_IWM is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
# CONFIG_USB_NET_ZAURUS is not set
# CONFIG_USB_HSO is not set
# CONFIG_USB_NET_INT51X1 is not set
CONFIG_WAN=y
# CONFIG_HDLC is not set
# CONFIG_DLCI is not set
# CONFIG_SBNI is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
# CONFIG_PPPOE is not set
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=800
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=m
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
CONFIG_USB_VIDEO_CLASS=m
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_PWC_INPUT_EVDEV is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
CONFIG_DRM_I915_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_GENERIC is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
# CONFIG_SND_HDA_CODEC_ATIHDMI is not set
# CONFIG_SND_HDA_CODEC_NVHDMI is not set
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_ONETOUCH=m
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_DEBUG=m
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
# CONFIG_MMC_SDHCI_PLTFM is not set
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_USB_IP_COMMON is not set
# CONFIG_W35UND is not set
# CONFIG_PRISM2_USB is not set
CONFIG_ECHO=m
# CONFIG_OTUS is not set
# CONFIG_RT2860 is not set
# CONFIG_RT2870 is not set
# CONFIG_RT3090 is not set
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_ALTERA_PCIE_CHDMA is not set
# CONFIG_RTL8187SE is not set
# CONFIG_RTL8192SU is not set
# CONFIG_RTL8192E is not set
# CONFIG_INPUT_MIMIO is not set
# CONFIG_TRANZPORT is not set
#
# Android
#
# CONFIG_ANDROID is not set
#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#
# CONFIG_INPUT_GPIO is not set
# CONFIG_DST is not set
# CONFIG_POHMELFS is not set
# CONFIG_B3DFG is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_PLAN9AUTH is not set
# CONFIG_LINE6_USB is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_UDL is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
#
# RAR Register Driver
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
CONFIG_ACPI_WMI=m
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=m
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
CONFIG_NILFS2_FS=m
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CRC32C_INTEL=m
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-25 20:57 no video output after suspend after "drm/i915: force mode set at lid open time" Riccardo Magliocchetti
@ 2009-10-26 1:52 ` Peter Stuge
2009-10-26 16:02 ` Jesse Barnes
2009-10-26 16:05 ` Jesse Barnes
1 sibling, 1 reply; 14+ messages in thread
From: Peter Stuge @ 2009-10-26 1:52 UTC (permalink / raw)
To: Riccardo Magliocchetti; +Cc: linux-kernel, jbarnes, mjg, eric
Hi,
Riccardo Magliocchetti wrote:
> i lost video output, screen stays black, after suspend after commit
> c1c7af60892070e4b82ad63bbfb95ae745056de0 "drm/i915: force mode set at lid
> open time".
I also experience this symptom.
I have an IBM ThinkPad X40, chipset with integrated 855GM graphics.
The last release kernel I used was 2.6.30, with DRI enabled but no fb.
Gentoo xorg-server-1.6.1.092 with xf86-video-intel-2.7.1. All vanilla
kernels. With that kernel I would get the mode back on restore, but
the panel backlight would not come on, so it would be very difficult
to see the screen contents, especially in dim environments.
thinkwiki.org documents this symptom on X40 and many other models.
One suggested workaround is to chvt 1 and save a copy of the VGA
device PCI config space right before echo mem > /sys/power/state,
and write it back and run vbetool post immediately after resume,
followed by chvt 7 (or wherever X is). This workaround functioned
fairly well for me, but not always reliably, and of course it's a
bit of a hack. :)
I am now running drm-intel.git a83a44 from Oct 14 with KMS enabled
and xf86-video-intel 1556c62 from Oct 8, and the workaround
(understandably) does not function anymore. I've tried permutations
with only saving PCI config space and only running vbetool but no go.
(Before this I tried 2.6.31.1 with KMS, but it didn't do Xv.)
(Oh, and Xv performance with a83a44+1556c6 is lower than 2.6.30 nofb,
but that's somewhat secondary. MPlayer performs worse than VLC, but
both are worse than MPlayer with 2.6.30+2.7.1.)
Can I help solve this somehow?
//Peter
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-26 1:52 ` Peter Stuge
@ 2009-10-26 16:02 ` Jesse Barnes
2009-10-26 19:28 ` Peter Stuge
0 siblings, 1 reply; 14+ messages in thread
From: Jesse Barnes @ 2009-10-26 16:02 UTC (permalink / raw)
To: Peter Stuge; +Cc: Riccardo Magliocchetti, linux-kernel, mjg, eric
On Mon, 26 Oct 2009 02:52:30 +0100
Peter Stuge <peter@stuge.se> wrote:
> (Before this I tried 2.6.31.1 with KMS, but it didn't do Xv.)
>
> (Oh, and Xv performance with a83a44+1556c6 is lower than 2.6.30 nofb,
> but that's somewhat secondary. MPlayer performs worse than VLC, but
> both are worse than MPlayer with 2.6.30+2.7.1.)
>
> Can I help solve this somehow?
I posted a patch that fixed an X40 I was testing:
drm/i915: save/restore BLC histogram control reg across suspend/resume
can you give it a try and see if it works for you?
It may not be related to Riccardo's report, since the above patch isn't
really related to the lid switch problem.
--
Jesse Barnes, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-26 16:02 ` Jesse Barnes
@ 2009-10-26 19:28 ` Peter Stuge
2009-10-26 19:39 ` Rafael J. Wysocki
0 siblings, 1 reply; 14+ messages in thread
From: Peter Stuge @ 2009-10-26 19:28 UTC (permalink / raw)
To: Jesse Barnes; +Cc: Riccardo Magliocchetti, linux-kernel, mjg, eric
Jesse Barnes wrote:
> > Can I help solve this somehow?
>
> I posted a patch that fixed an X40 I was testing:
> drm/i915: save/restore BLC histogram control reg across suspend/resume
>
> can you give it a try and see if it works for you?
It works beautifully. Fantastic. Thank you very much! It was marked
Accepted in patchwork but if you need one then here's a:
Tested-by: Peter Stuge <peter@stuge.se>
> It may not be related to Riccardo's report, since the above patch
> isn't really related to the lid switch problem.
Agree, I reacted to his message because he saw a similar symptom and
I was just on my way to write a message about it anyway.
//Peter
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-26 19:28 ` Peter Stuge
@ 2009-10-26 19:39 ` Rafael J. Wysocki
2009-10-26 19:42 ` Peter Stuge
0 siblings, 1 reply; 14+ messages in thread
From: Rafael J. Wysocki @ 2009-10-26 19:39 UTC (permalink / raw)
To: Peter Stuge; +Cc: Jesse Barnes, Riccardo Magliocchetti, linux-kernel, mjg, eric
On Monday 26 October 2009, Peter Stuge wrote:
> Jesse Barnes wrote:
> > > Can I help solve this somehow?
> >
> > I posted a patch that fixed an X40 I was testing:
> > drm/i915: save/restore BLC histogram control reg across suspend/resume
> >
> > can you give it a try and see if it works for you?
>
> It works beautifully. Fantastic. Thank you very much! It was marked
> Accepted in patchwork but if you need one then here's a:
>
> Tested-by: Peter Stuge <peter@stuge.se>
A link to the patch, please?
Rafael
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-26 19:39 ` Rafael J. Wysocki
@ 2009-10-26 19:42 ` Peter Stuge
2009-10-26 20:00 ` Rafael J. Wysocki
0 siblings, 1 reply; 14+ messages in thread
From: Peter Stuge @ 2009-10-26 19:42 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Jesse Barnes, Riccardo Magliocchetti, linux-kernel, mjg, eric
Rafael J. Wysocki wrote:
> > > can you give it a try and see if it works for you?
> >
> > It works beautifully. Fantastic. Thank you very much! It was marked
> > Accepted in patchwork but if you need one then here's a:
> >
> > Tested-by: Peter Stuge <peter@stuge.se>
>
> A link to the patch, please?
Sorry about that!
http://patchwork.kernel.org/patch/53783/
Had to apply it manually onto drm-intel.git, but no big deal for me.
//Peter
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-26 19:42 ` Peter Stuge
@ 2009-10-26 20:00 ` Rafael J. Wysocki
0 siblings, 0 replies; 14+ messages in thread
From: Rafael J. Wysocki @ 2009-10-26 20:00 UTC (permalink / raw)
To: Peter Stuge; +Cc: Jesse Barnes, Riccardo Magliocchetti, linux-kernel, mjg, eric
On Monday 26 October 2009, Peter Stuge wrote:
> Rafael J. Wysocki wrote:
> > > > can you give it a try and see if it works for you?
> > >
> > > It works beautifully. Fantastic. Thank you very much! It was marked
> > > Accepted in patchwork but if you need one then here's a:
> > >
> > > Tested-by: Peter Stuge <peter@stuge.se>
> >
> > A link to the patch, please?
>
> Sorry about that!
>
> http://patchwork.kernel.org/patch/53783/
>
> Had to apply it manually onto drm-intel.git, but no big deal for me.
OK, thanks.
Rafael
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-25 20:57 no video output after suspend after "drm/i915: force mode set at lid open time" Riccardo Magliocchetti
2009-10-26 1:52 ` Peter Stuge
@ 2009-10-26 16:05 ` Jesse Barnes
2009-10-27 21:21 ` Riccardo Magliocchetti
1 sibling, 1 reply; 14+ messages in thread
From: Jesse Barnes @ 2009-10-26 16:05 UTC (permalink / raw)
To: Riccardo Magliocchetti; +Cc: linux-kernel, mjg, eric
On Sun, 25 Oct 2009 21:57:32 +0100
Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
> Hello,
>
> i lost video output, screen stays black, after suspend after commit
> c1c7af60892070e4b82ad63bbfb95ae745056de0 "drm/i915: force mode set at
> lid open time".
>
> I'm attaching my dmesg with 2.6.32-rc5 (actually
> 964fe080d94db82a3268443e9b9ece4c60246414), my bisect log and my
> config.
>
> git bisect response:
>
> c1c7af60892070e4b82ad63bbfb95ae745056de0 is the first bad commit
> commit c1c7af60892070e4b82ad63bbfb95ae745056de0
> Author: Jesse Barnes <jbarnes@virtuousgeek.org>
> Date: Thu Sep 10 15:28:03 2009 -0700
>
> drm/i915: force mode set at lid open time
>
> Some laptop platforms will disable pipes and/or planes at lid
> close time
> and not restore them when the lid is opened again. So catch the
> lid event, and if the lid was opened, force a mode restore.
>
> Fixes fdo bug #21230.
>
> Acked-by: Matthew Garrett <mjg@redhat.com>
> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
> Signed-off-by: Eric Anholt <eric@anholt.net>
I wonder if this is the real problem... This patch introduced an issue
that was fixed by 06891e27a9b5dba5268bb80e41a283f51335afe7 that could
cause a blank screen on lid open or resume, depending on how lid events
were delivered. Should be easy enough to test though, you can remove
the whole
+ if (acpi_lid_open())
+ drm_helper_resume_force_mode(dev);
block and see if that also helps (in the current tree there's a lock
taken around the force_mode call, you'll need to remove those lines too
for testing).
--
Jesse Barnes, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-26 16:05 ` Jesse Barnes
@ 2009-10-27 21:21 ` Riccardo Magliocchetti
2009-10-27 21:26 ` Jesse Barnes
0 siblings, 1 reply; 14+ messages in thread
From: Riccardo Magliocchetti @ 2009-10-27 21:21 UTC (permalink / raw)
To: Jesse Barnes; +Cc: linux-kernel, mjg, eric
Jesse,
Jesse Barnes ha scritto:
> On Sun, 25 Oct 2009 21:57:32 +0100
> Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
>
>> Hello,
>>
>> i lost video output, screen stays black, after suspend after commit
>> c1c7af60892070e4b82ad63bbfb95ae745056de0 "drm/i915: force mode set at
>> lid open time".
>>
>> I'm attaching my dmesg with 2.6.32-rc5 (actually
>> 964fe080d94db82a3268443e9b9ece4c60246414), my bisect log and my
>> config.
>>
>> git bisect response:
>>
>> c1c7af60892070e4b82ad63bbfb95ae745056de0 is the first bad commit
>> commit c1c7af60892070e4b82ad63bbfb95ae745056de0
>> Author: Jesse Barnes <jbarnes@virtuousgeek.org>
>> Date: Thu Sep 10 15:28:03 2009 -0700
>>
>> drm/i915: force mode set at lid open time
>>
[snip]
>
> I wonder if this is the real problem... This patch introduced an issue
> that was fixed by 06891e27a9b5dba5268bb80e41a283f51335afe7 that could
> cause a blank screen on lid open or resume, depending on how lid events
> were delivered. Should be easy enough to test though, you can remove
> the whole
>
> + if (acpi_lid_open())
> + drm_helper_resume_force_mode(dev);
>
> block and see if that also helps (in the current tree there's a lock
> taken around the force_mode call, you'll need to remove those lines too
> for testing).
So i've tried separately both this and the patch with the fix for
thinkpad (i have a samsung p460aa01 btw) with latest git and they have
not fixed the issue.
+#if 0
if (acpi_lid_open() && !dev_priv->suspended) {
mutex_lock(&dev->mode_config.mutex);
drm_helper_resume_force_mode(dev);
mutex_unlock(&dev->mode_config.mutex);
}
+#endif
thanks,
riccardo
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-27 21:21 ` Riccardo Magliocchetti
@ 2009-10-27 21:26 ` Jesse Barnes
2009-10-31 13:42 ` Riccardo Magliocchetti
0 siblings, 1 reply; 14+ messages in thread
From: Jesse Barnes @ 2009-10-27 21:26 UTC (permalink / raw)
To: Riccardo Magliocchetti; +Cc: linux-kernel, mjg, eric
On Tue, 27 Oct 2009 22:21:39 +0100
Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
> Jesse,
>
> Jesse Barnes ha scritto:
> > On Sun, 25 Oct 2009 21:57:32 +0100
> > Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
> >
> >> Hello,
> >>
> >> i lost video output, screen stays black, after suspend after
> >> commit c1c7af60892070e4b82ad63bbfb95ae745056de0 "drm/i915: force
> >> mode set at lid open time".
> >>
> >> I'm attaching my dmesg with 2.6.32-rc5 (actually
> >> 964fe080d94db82a3268443e9b9ece4c60246414), my bisect log and my
> >> config.
> >>
> >> git bisect response:
> >>
> >> c1c7af60892070e4b82ad63bbfb95ae745056de0 is the first bad commit
> >> commit c1c7af60892070e4b82ad63bbfb95ae745056de0
> >> Author: Jesse Barnes <jbarnes@virtuousgeek.org>
> >> Date: Thu Sep 10 15:28:03 2009 -0700
> >>
> >> drm/i915: force mode set at lid open time
> >>
> [snip]
> >
> > I wonder if this is the real problem... This patch introduced an
> > issue that was fixed by 06891e27a9b5dba5268bb80e41a283f51335afe7
> > that could cause a blank screen on lid open or resume, depending on
> > how lid events were delivered. Should be easy enough to test
> > though, you can remove the whole
> >
> > + if (acpi_lid_open())
> > + drm_helper_resume_force_mode(dev);
> >
> > block and see if that also helps (in the current tree there's a lock
> > taken around the force_mode call, you'll need to remove those lines
> > too for testing).
>
> So i've tried separately both this and the patch with the fix for
> thinkpad (i have a samsung p460aa01 btw) with latest git and they
> have not fixed the issue.
>
> +#if 0
> if (acpi_lid_open() && !dev_priv->suspended) {
> mutex_lock(&dev->mode_config.mutex);
> drm_helper_resume_force_mode(dev);
> mutex_unlock(&dev->mode_config.mutex);
> }
> +#endif
So just removing the above lines doesn't fix things, but reverting the
whole patch (c1c7af60892070e4b82ad63bbfb95ae745056de0) does? If so the
only other thing I can think of is
2c907b72db4dd4e8af6dccb6e0ac122d78627b8d, which is in Linus's tree now,
but may not be in the drm-intel tree you're testing?
--
Jesse Barnes, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-27 21:26 ` Jesse Barnes
@ 2009-10-31 13:42 ` Riccardo Magliocchetti
2009-10-31 13:46 ` Riccardo Magliocchetti
0 siblings, 1 reply; 14+ messages in thread
From: Riccardo Magliocchetti @ 2009-10-31 13:42 UTC (permalink / raw)
To: Jesse Barnes; +Cc: linux-kernel, mjg, eric
[-- Attachment #1: Type: text/plain, Size: 2647 bytes --]
Jesse Barnes ha scritto:
> On Tue, 27 Oct 2009 22:21:39 +0100
> Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
>
>> Jesse,
>>
>> Jesse Barnes ha scritto:
>>> On Sun, 25 Oct 2009 21:57:32 +0100
>>> Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
>>>
>>>> Hello,
>>>>
>>>> i lost video output, screen stays black, after suspend after
>>>> commit c1c7af60892070e4b82ad63bbfb95ae745056de0 "drm/i915: force
>>>> mode set at lid open time".
>>>>
>>>> I'm attaching my dmesg with 2.6.32-rc5 (actually
>>>> 964fe080d94db82a3268443e9b9ece4c60246414), my bisect log and my
>>>> config.
>>>>
>>>> git bisect response:
>>>>
>>>> c1c7af60892070e4b82ad63bbfb95ae745056de0 is the first bad commit
>>>> commit c1c7af60892070e4b82ad63bbfb95ae745056de0
>>>> Author: Jesse Barnes <jbarnes@virtuousgeek.org>
>>>> Date: Thu Sep 10 15:28:03 2009 -0700
>>>>
>>>> drm/i915: force mode set at lid open time
>>>>
>> [snip]
>>> I wonder if this is the real problem... This patch introduced an
>>> issue that was fixed by 06891e27a9b5dba5268bb80e41a283f51335afe7
>>> that could cause a blank screen on lid open or resume, depending on
>>> how lid events were delivered. Should be easy enough to test
>>> though, you can remove the whole
>>>
>>> + if (acpi_lid_open())
>>> + drm_helper_resume_force_mode(dev);
>>>
>>> block and see if that also helps (in the current tree there's a lock
>>> taken around the force_mode call, you'll need to remove those lines
>>> too for testing).
>> So i've tried separately both this and the patch with the fix for
>> thinkpad (i have a samsung p460aa01 btw) with latest git and they
>> have not fixed the issue.
>>
>> +#if 0
>> if (acpi_lid_open() && !dev_priv->suspended) {
>> mutex_lock(&dev->mode_config.mutex);
>> drm_helper_resume_force_mode(dev);
>> mutex_unlock(&dev->mode_config.mutex);
>> }
>> +#endif
>
> So just removing the above lines doesn't fix things, but reverting the
> whole patch (c1c7af60892070e4b82ad63bbfb95ae745056de0) does? If so the
> only other thing I can think of is
> 2c907b72db4dd4e8af6dccb6e0ac122d78627b8d, which is in Linus's tree now,
> but may not be in the drm-intel tree you're testing?
Sorry for taking so long to respond. Anyway latest Linus' git master
with reverted c1c7af60892070e4b82ad63bbfb95ae745056de0 , per attached
patch, does not fix the issue for me. Please note that just reverting
the commit does not compile because of an added user of acpi_lid_open()
which requires acpi/button.h which has been added in
7121413f2accf14cf05b38539fb7a8be77543370. Will try to revert that too.
thanks,
riccardo
[-- Attachment #2: revert-c1c7af60892070e4b82ad63bbfb95ae745056de0.diff --]
[-- Type: text/x-patch, Size: 3235 bytes --]
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index f831ea1..e4d971c 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -102,7 +102,6 @@ config DRM_I915
select BACKLIGHT_CLASS_DEVICE if ACPI
select INPUT if ACPI
select ACPI_VIDEO if ACPI
- select ACPI_BUTTON if ACPI
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 6035d3d..22d8cbd 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -256,8 +256,6 @@ typedef struct drm_i915_private {
unsigned int edp_support:1;
int lvds_ssc_freq;
- struct notifier_block lid_notifier;
-
int crt_ddc_bus; /* -1 = unknown, else GPIO to use for CRT DDC */
struct drm_i915_fence_reg fence_regs[16]; /* assume 965 */
int fence_reg_start; /* 4 if userland hasn't ioctl'd us yet */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 3c14240..58b3698 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -24,8 +24,6 @@
* Eric Anholt <eric@anholt.net>
*/
-#include <linux/module.h>
-#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/kernel.h>
#include "drmP.h"
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 98ae3d7..a6d026d 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -656,24 +656,6 @@ static int intel_lvds_get_modes(struct drm_connector *connector)
return 0;
}
-static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
- void *unused)
-{
- struct drm_i915_private *dev_priv =
- container_of(nb, struct drm_i915_private, lid_notifier);
- struct drm_device *dev = dev_priv->dev;
-
- if (acpi_lid_open() && !dev_priv->suspended) {
- mutex_lock(&dev->mode_config.mutex);
- drm_helper_resume_force_mode(dev);
- mutex_unlock(&dev->mode_config.mutex);
- }
-
- drm_sysfs_hotplug_event(dev_priv->dev);
-
- return NOTIFY_OK;
-}
-
/**
* intel_lvds_destroy - unregister and free LVDS structures
* @connector: connector to free
@@ -683,14 +665,10 @@ static int intel_lid_notify(struct notifier_block *nb, unsigned long val,
*/
static void intel_lvds_destroy(struct drm_connector *connector)
{
- struct drm_device *dev = connector->dev;
struct intel_output *intel_output = to_intel_output(connector);
- struct drm_i915_private *dev_priv = dev->dev_private;
if (intel_output->ddc_bus)
intel_i2c_destroy(intel_output->ddc_bus);
- if (dev_priv->lid_notifier.notifier_call)
- acpi_lid_notifier_unregister(&dev_priv->lid_notifier);
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(connector);
@@ -1057,11 +1035,6 @@ out:
pwm |= PWM_PCH_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
}
- dev_priv->lid_notifier.notifier_call = intel_lid_notify;
- if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
- DRM_DEBUG("lid notifier registration failed\n");
- dev_priv->lid_notifier.notifier_call = NULL;
- }
drm_sysfs_connector_add(connector);
return;
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-31 13:42 ` Riccardo Magliocchetti
@ 2009-10-31 13:46 ` Riccardo Magliocchetti
2009-11-04 19:19 ` Jesse Barnes
0 siblings, 1 reply; 14+ messages in thread
From: Riccardo Magliocchetti @ 2009-10-31 13:46 UTC (permalink / raw)
To: Jesse Barnes; +Cc: linux-kernel, mjg, eric
Riccardo Magliocchetti ha scritto:
> Jesse Barnes ha scritto:
>> On Tue, 27 Oct 2009 22:21:39 +0100
>> Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
>>
>>> Jesse,
>>>
>>> Jesse Barnes ha scritto:
>>>> On Sun, 25 Oct 2009 21:57:32 +0100
>>>> Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
>>>>
>>>>> Hello,
>>>>>
>>>>> i lost video output, screen stays black, after suspend after
>>>>> commit c1c7af60892070e4b82ad63bbfb95ae745056de0 "drm/i915: force
>>>>> mode set at lid open time".
>>>>>
>>>>> I'm attaching my dmesg with 2.6.32-rc5 (actually
>>>>> 964fe080d94db82a3268443e9b9ece4c60246414), my bisect log and my
>>>>> config.
>>>>>
>>>>> git bisect response:
>>>>>
>>>>> c1c7af60892070e4b82ad63bbfb95ae745056de0 is the first bad commit
>>>>> commit c1c7af60892070e4b82ad63bbfb95ae745056de0
>>>>> Author: Jesse Barnes <jbarnes@virtuousgeek.org>
>>>>> Date: Thu Sep 10 15:28:03 2009 -0700
>>>>>
>>>>> drm/i915: force mode set at lid open time
>>>>>
>>> [snip]
>>>> I wonder if this is the real problem... This patch introduced an
>>>> issue that was fixed by 06891e27a9b5dba5268bb80e41a283f51335afe7
>>>> that could cause a blank screen on lid open or resume, depending on
>>>> how lid events were delivered. Should be easy enough to test
>>>> though, you can remove the whole
>>>>
>>>> + if (acpi_lid_open())
>>>> + drm_helper_resume_force_mode(dev);
>>>>
>>>> block and see if that also helps (in the current tree there's a lock
>>>> taken around the force_mode call, you'll need to remove those lines
>>>> too for testing).
>>> So i've tried separately both this and the patch with the fix for
>>> thinkpad (i have a samsung p460aa01 btw) with latest git and they
>>> have not fixed the issue.
>>>
>>> +#if 0
>>> if (acpi_lid_open() && !dev_priv->suspended) {
>>> mutex_lock(&dev->mode_config.mutex);
>>> drm_helper_resume_force_mode(dev);
>>> mutex_unlock(&dev->mode_config.mutex);
>>> }
>>> +#endif
>>
>> So just removing the above lines doesn't fix things, but reverting the
>> whole patch (c1c7af60892070e4b82ad63bbfb95ae745056de0) does? If so the
>> only other thing I can think of is
>> 2c907b72db4dd4e8af6dccb6e0ac122d78627b8d, which is in Linus's tree now,
>> but may not be in the drm-intel tree you're testing?
>
> Sorry for taking so long to respond. Anyway latest Linus' git master
> with reverted c1c7af60892070e4b82ad63bbfb95ae745056de0 , per attached
> patch, does not fix the issue for me. Please note that just reverting
> the commit does not compile because of an added user of acpi_lid_open()
> which requires acpi/button.h which has been added in
> 7121413f2accf14cf05b38539fb7a8be77543370. Will try to revert that too.
Sorry, that commit just change that line, it does not add the
acpi_lid_open() call.
thanks,
riccardo
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-10-31 13:46 ` Riccardo Magliocchetti
@ 2009-11-04 19:19 ` Jesse Barnes
2009-11-04 20:16 ` Riccardo Magliocchetti
0 siblings, 1 reply; 14+ messages in thread
From: Jesse Barnes @ 2009-11-04 19:19 UTC (permalink / raw)
To: Riccardo Magliocchetti; +Cc: linux-kernel, mjg, eric
On Sat, 31 Oct 2009 14:46:43 +0100
Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
> > Sorry for taking so long to respond. Anyway latest Linus' git
> > master with reverted c1c7af60892070e4b82ad63bbfb95ae745056de0 , per
> > attached patch, does not fix the issue for me. Please note that
> > just reverting the commit does not compile because of an added user
> > of acpi_lid_open() which requires acpi/button.h which has been
> > added in 7121413f2accf14cf05b38539fb7a8be77543370. Will try to
> > revert that too.
>
> Sorry, that commit just change that line, it does not add the
> acpi_lid_open() call.
Linus's tree has another change which might help:
commit c9354c85c1c7bac788ce57d3c17f2016c1c45b1d
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Mon Nov 2 09:29:55 2009 -0800
i915: fix intel graphics suspend breakage due to resume/lid event
confusion
Have you tried a tree with it included yet?
--
Jesse Barnes, Intel Open Source Technology Center
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: no video output after suspend after "drm/i915: force mode set at lid open time"
2009-11-04 19:19 ` Jesse Barnes
@ 2009-11-04 20:16 ` Riccardo Magliocchetti
0 siblings, 0 replies; 14+ messages in thread
From: Riccardo Magliocchetti @ 2009-11-04 20:16 UTC (permalink / raw)
To: Jesse Barnes; +Cc: linux-kernel, mjg, eric, Linus Torvalds
Jesse Barnes ha scritto:
> On Sat, 31 Oct 2009 14:46:43 +0100
> Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com> wrote:
>>> Sorry for taking so long to respond. Anyway latest Linus' git
>>> master with reverted c1c7af60892070e4b82ad63bbfb95ae745056de0 , per
>>> attached patch, does not fix the issue for me. Please note that
>>> just reverting the commit does not compile because of an added user
>>> of acpi_lid_open() which requires acpi/button.h which has been
>>> added in 7121413f2accf14cf05b38539fb7a8be77543370. Will try to
>>> revert that too.
>> Sorry, that commit just change that line, it does not add the
>> acpi_lid_open() call.
>
> Linus's tree has another change which might help:
>
> commit c9354c85c1c7bac788ce57d3c17f2016c1c45b1d
> Author: Linus Torvalds <torvalds@linux-foundation.org>
> Date: Mon Nov 2 09:29:55 2009 -0800
>
> i915: fix intel graphics suspend breakage due to resume/lid event
> confusion
>
> Have you tried a tree with it included yet?
Sure, i tested 2.6.32-rc6 and latest Linus' git
91d3f9bacdb4950d2f79fe2ba296aa249f60d06c which has latest pull from drm
tree.
Btw, does anybody know how to update bugzilla by email? Can't find it
mentioned anywhere.
thanks,
riccardo
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2009-11-04 20:16 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-10-25 20:57 no video output after suspend after "drm/i915: force mode set at lid open time" Riccardo Magliocchetti
2009-10-26 1:52 ` Peter Stuge
2009-10-26 16:02 ` Jesse Barnes
2009-10-26 19:28 ` Peter Stuge
2009-10-26 19:39 ` Rafael J. Wysocki
2009-10-26 19:42 ` Peter Stuge
2009-10-26 20:00 ` Rafael J. Wysocki
2009-10-26 16:05 ` Jesse Barnes
2009-10-27 21:21 ` Riccardo Magliocchetti
2009-10-27 21:26 ` Jesse Barnes
2009-10-31 13:42 ` Riccardo Magliocchetti
2009-10-31 13:46 ` Riccardo Magliocchetti
2009-11-04 19:19 ` Jesse Barnes
2009-11-04 20:16 ` Riccardo Magliocchetti
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox