From: Alexander Holler <holler@ahsoftware.de>
To: Oliver Neukum <oliver@neukum.org>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: Problems with p55-express and sleeping usb-hds
Date: Tue, 17 Nov 2009 02:11:26 +0100 [thread overview]
Message-ID: <4B01F83E.5040905@ahsoftware.de> (raw)
In-Reply-To: <4B01F3D9.5090003@ahsoftware.de>
This isn't my time, :(
Am 17.11.2009 01:52, schrieb Alexander Holler:
> Here it is, I haven't cut anything in between and have choosen some
> lines (of the 1gb-log I've got) before and after the first reset-message:
>
> --------------------------------------------------
> Nov 17 01:14:50 krabat kernel: [ 1219.910972] usb-storage: Bulk command
> transfer result=0
that was the second reset message, here is the first:
------------------------
Nov 17 01:14:14 krabat kernel: [ 1184.253782] usb-storage: Bulk data
transfer result 0x0
Nov 17 01:14:14 krabat kernel: [ 1184.253784] usb-storage: Attempting to
get CSW...
Nov 17 01:14:14 krabat kernel: [ 1184.253786] usb-storage:
usb_stor_bulk_transfer_buf: xfer 13 bytes
Nov 17 01:14:14 krabat kernel: [ 1184.253795] usb-storage: Status code
0; transferred 8192/8192
Nov 17 01:14:14 krabat kernel: [ 1184.253797] usb-storage: -- transfer
complete
Nov 17 01:14:14 krabat kernel: [ 1184.253799] usb-storage: Bulk data
transfer result 0x0
Nov 17 01:14:14 krabat kernel: [ 1184.253801] usb-storage: Attempting to
get CSW...
Nov 17 01:14:14 krabat kernel: [ 1184.253804] usb-storage:
usb_stor_bulk_transfer_buf: xfer 13 bytes
Nov 17 01:14:45 krabat kernel: [ 1214.716721] usb-storage: command_abort
called
Nov 17 01:14:45 krabat kernel: [ 1214.716725] usb-storage:
usb_stor_stop_transport called
Nov 17 01:14:45 krabat kernel: [ 1214.716727] usb-storage: -- cancelling URB
Nov 17 01:14:45 krabat kernel: [ 1214.728631] usb-storage: Status code
-104; transferred 0/13
Nov 17 01:14:45 krabat kernel: [ 1214.728634] usb-storage: -- transfer
cancelled
Nov 17 01:14:45 krabat kernel: [ 1214.728637] usb-storage: Bulk status
result = 4
Nov 17 01:14:45 krabat kernel: [ 1214.728639] usb-storage: -- command
was aborted
Nov 17 01:14:45 krabat kernel: [ 1214.728643] usb-storage:
usb_stor_pre_reset
Nov 17 01:14:45 krabat kernel: [ 1214.728738] usb-storage: Status code
0; transferred 13/13
Nov 17 01:14:45 krabat kernel: [ 1214.728741] usb-storage: -- transfer
complete
Nov 17 01:14:45 krabat kernel: [ 1214.728743] usb-storage: Bulk status
result = 0
Nov 17 01:14:45 krabat kernel: [ 1214.728746] usb-storage: Bulk Status S
0x53425355 T 0x72e1b R 0 Stat 0x0
Nov 17 01:14:45 krabat kernel: [ 1214.728750] usb-storage: scsi cmd
done, result=0x0
Nov 17 01:14:45 krabat kernel: [ 1214.728754] usb-storage: *** thread
sleeping.
Nov 17 01:14:45 krabat kernel: [ 1214.728772] usb-storage: queuecommand
called
Nov 17 01:14:45 krabat kernel: [ 1214.728784] usb-storage: *** thread
awakened.
Nov 17 01:14:45 krabat kernel: [ 1214.728788] usb-storage: Command
READ_10 (10 bytes)
Nov 17 01:14:45 krabat kernel: [ 1214.728790] usb-storage: 28 00 20 c5
3e ea 00 00 f0 00
Nov 17 01:14:45 krabat kernel: [ 1214.728804] usb-storage: Bulk Command
S 0x43425355 T 0x72e1c L 122880 F 128 Trg 0 LUN 0 CL 10
Nov 17 01:14:45 krabat kernel: [ 1214.728809] usb-storage:
usb_stor_bulk_transfer_buf: xfer 31 bytes
Nov 17 01:14:45 krabat kernel: [ 1214.752624] usb-storage: Status code
0; transferred 31/31
Nov 17 01:14:45 krabat kernel: [ 1214.752627] usb-storage: -- transfer
complete
Nov 17 01:14:45 krabat kernel: [ 1214.752629] usb-storage: Bulk command
transfer result=0
Nov 17 01:14:45 krabat kernel: [ 1214.752633] usb-storage:
usb_stor_bulk_transfer_sglist: xfer 122880 bytes, 8 entries
Nov 17 01:14:45 krabat kernel: [ 1214.779473] usb-storage: Status code
0; transferred 122880/122880
Nov 17 01:14:45 krabat kernel: [ 1214.779476] usb-storage: -- transfer
complete
Nov 17 01:14:45 krabat kernel: [ 1214.779478] usb-storage: Bulk data
transfer result 0x0
Nov 17 01:14:45 krabat kernel: [ 1214.779480] usb-storage: Attempting to
get CSW...
Nov 17 01:14:45 krabat kernel: [ 1214.779483] usb-storage:
usb_stor_bulk_transfer_buf: xfer 13 bytes
Nov 17 01:14:45 krabat kernel: [ 1214.784753] ehci_hcd 0000:00:1d.7:
port 1 high speed
Nov 17 01:14:45 krabat kernel: [ 1214.784760] ehci_hcd 0000:00:1d.7:
GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
Nov 17 01:14:45 krabat kernel: [ 1214.840337] usb 3-1: reset high speed
USB device using ehci_hcd and address 4
Nov 17 01:14:50 krabat kernel: [ 1219.839123] usb 3-1: usb-storage timed
out on ep0in len=0/64
Nov 17 01:14:50 krabat kernel: [ 1219.839213] usb-storage: Status code
0; transferred 13/13
Nov 17 01:14:50 krabat kernel: [ 1219.839216] usb-storage: -- transfer
complete
Nov 17 01:14:50 krabat kernel: [ 1219.839218] usb-storage: Bulk status
result = 0
Nov 17 01:14:50 krabat kernel: [ 1219.839221] usb-storage: Bulk Status S
0x53425355 T 0x72e1c R 0 Stat 0x0
Nov 17 01:14:50 krabat kernel: [ 1219.839225] usb-storage: scsi cmd
done, result=0x0
Nov 17 01:14:50 krabat kernel: [ 1219.839229] usb-storage: *** thread
sleeping.
Nov 17 01:14:50 krabat kernel: [ 1219.839250] usb-storage: queuecommand
called
Nov 17 01:14:50 krabat kernel: [ 1219.839263] usb-storage: *** thread
awakened.
Nov 17 01:14:50 krabat kernel: [ 1219.839267] usb-storage: Command
READ_10 (10 bytes)
Nov 17 01:14:50 krabat kernel: [ 1219.839270] usb-storage: 28 00 20 c5
3f da 00 00 10 00
Nov 17 01:14:50 krabat kernel: [ 1219.839283] usb-storage: Bulk Command
S 0x43425355 T 0x72e1d L 8192 F 128 Trg 0 LUN 0 CL 10
Nov 17 01:14:50 krabat kernel: [ 1219.839288] usb-storage:
usb_stor_bulk_transfer_buf: xfer 31 bytes
Nov 17 01:14:50 krabat kernel: [ 1219.863238] usb-storage: Status code
0; transferred 31/31
Nov 17 01:14:50 krabat kernel: [ 1219.863241] usb-storage: -- transfer
complete
Nov 17 01:14:50 krabat kernel: [ 1219.863243] usb-storage: Bulk command
transfer result=0
Nov 17 01:14:50 krabat kernel: [ 1219.863246] usb-storage:
usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
Nov 17 01:14:50 krabat kernel: [ 1219.864602] usb-storage: Status code
0; transferred 8192/8192
Nov 17 01:14:50 krabat kernel: [ 1219.864605] usb-storage: -- transfer
complete
Nov 17 01:14:50 krabat kernel: [ 1219.864607] usb-storage: Bulk data
transfer result 0x0
Nov 17 01:14:50 krabat kernel: [ 1219.864609] usb-storage: Attempting to
get CSW...
Nov 17 01:14:50 krabat kernel: [ 1219.864612] usb-storage:
usb_stor_bulk_transfer_buf: xfer 13 bytes
Nov 17 01:14:50 krabat kernel: [ 1219.887021] usb-storage: Status code
0; transferred 13/13
Nov 17 01:14:50 krabat kernel: [ 1219.887024] usb-storage: -- transfer
complete
Nov 17 01:14:50 krabat kernel: [ 1219.887027] usb-storage: Bulk status
result = 0
Nov 17 01:14:50 krabat kernel: [ 1219.887030] usb-storage: Bulk Status S
0x53425355 T 0x72e1d R 0 Stat 0x0
Nov 17 01:14:50 krabat kernel: [ 1219.887033] usb-storage: scsi cmd
done, result=0x0
Nov 17 01:14:50 krabat kernel: [ 1219.887037] usb-storage: *** thread
sleeping.
Nov 17 01:14:50 krabat kernel: [ 1219.887053] usb-storage: queuecommand
called
Nov 17 01:14:50 krabat kernel: [ 1219.887064] usb-storage: *** thread
awakened.
Nov 17 01:14:50 krabat kernel: [ 1219.887068] usb-storage: Command
READ_10 (10 bytes)
Nov 17 01:14:50 krabat kernel: [ 1219.887071] usb-storage: 28 00 20 c5
3f ea 00 00 f0 00
Nov 17 01:14:50 krabat kernel: [ 1219.887083] usb-storage: Bulk Command
S 0x43425355 T 0x72e1e L 122880 F 128 Trg 0 LUN 0 CL 10
Nov 17 01:14:50 krabat kernel: [ 1219.887089] usb-storage:
usb_stor_bulk_transfer_buf: xfer 31 bytes
Nov 17 01:14:50 krabat kernel: [ 1219.910966] usb-storage: Status code
0; transferred 31/31
Nov 17 01:14:50 krabat kernel: [ 1219.910969] usb-storage: -- transfer
complete
Nov 17 01:14:50 krabat kernel: [ 1219.910972] usb-storage: Bulk command
transfer result=0
> --------------------------------------------------
>
> If more infos are needed (or the complete log)...
>
> Regards,
>
> Alexander
next prev parent reply other threads:[~2009-11-17 1:11 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-13 22:30 Problems with p55-express and sleeping usb-hds Alexander Holler
2009-11-13 23:27 ` Robert Hancock
2009-11-14 2:02 ` Alexander Holler
2009-11-13 23:30 ` Oliver Neukum
2009-11-13 23:35 ` Alexander Holler
2009-11-14 2:50 ` Alexander Holler
2009-11-14 10:06 ` Oliver Neukum
2009-11-14 17:31 ` Alexander Holler
2009-11-17 0:19 ` Alexander Holler
2009-11-17 0:52 ` Alexander Holler
2009-11-17 1:11 ` Alexander Holler [this message]
2009-11-17 23:05 ` Alexander Holler
2009-11-18 16:22 ` Alan Stern
2009-12-10 22:28 ` Alexander Holler
2009-11-14 2:32 ` Matthew Garrett
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B01F83E.5040905@ahsoftware.de \
--to=holler@ahsoftware.de \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=oliver@neukum.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox