Re: [PATCH v3] k10temp: temperature sensor for AMD Family 10h/11h CPUs

[Clemens Ladisch <clemens@ladisch.de>]

Jean Delvare wrote:
> On Tue, 24 Nov 2009 15:09:57 +0100, Clemens Ladisch wrote:
> > This means that one of the already existing limit values must be the
> > reference base, so we'd need just a mechanism to specify which of them
> > is it, i.e., "temp1_relative_base: max".  If we'd have
> > "temp1_relative: 70000", the application would have to search among the
> > limit values for one with the same value.
> 
> I fail to see why the application would care about this at all. When in
> relative mode, all other values would be offset by the temp#_relative
> value. But that value itself would not be displayed (it has no physical
> value, otherwise we wouldn't be in absolute mode, would we?)
> ...
> 
> > temp1_relative: true
> 
> This is taking flexibility away from us, for no benefit that I can see.
> Am I missing something?

The application has to display something like "24 °C below the limit",
so how should it know that the 70°C should be named "the limit"?

To use an example, my CPU has these entries like these:
temp1_input: 29875
temp1_max: 70000
temp1_crit: 95000
temp1_crit_hyst: 92500

How should these entries be displayed?
(we know that: "40.1 °C below limit", "limit", "25 °C above limit" etc.)

But what algorithm should the application (or libsensors) use to create
those labels?  If we have "temp1_relative: 70000", then this happens to
be the "max" limit; but what if some CPU vendor decides to define, e.g.,
the value 0 as the "normal" operating temperatire, so that the entries
would look like this:
temp1_input: -1000
temp1_max: 40000
temp1_relative: 0
Should the values be labeled as "1 °C below normal" and "40 °C above
normal", and how should the application know that 0 is to be labeled
"normal"?  It might make more sense to display the temperature just as
"41 °C below max", in which case the actual value of temp1_relative is
not used at all.

"Relative" means that any value is meaningful only in comparison with
other values/limits, so it does not make sense to declare one point on
the scale as base.

> Additionally it wouldn't fit in libsensors as it exists today.

Then the best bet would probably be an entry like temp#_unit, with
0 = absolute °C (default); 1 = relative °C or °K; other values
"unknown".  Even if some silly scale is introduced later, applications
that read this entry then know that they must not display a unit like °C
for unknown unit specifications.


Best regards,
Clemens