[PATCH 1/9] pci: separate pci_setup_bridge to small functions

[Yinghai Lu <yinghai@kernel.org>]

prepare to use those small functions according to resource type later

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 drivers/pci/setup-bus.c |   54 +++++++++++++++++++++++++++++++++++++++---------
 1 file changed, 44 insertions(+), 10 deletions(-)

Index: linux-2.6/drivers/pci/setup-bus.c
===================================================================
--- linux-2.6.orig/drivers/pci/setup-bus.c
+++ linux-2.6/drivers/pci/setup-bus.c
@@ -134,19 +134,12 @@ EXPORT_SYMBOL(pci_setup_cardbus);
    config space writes, so it's quite possible that an I/O window of
    the bridge will have some undesirable address (e.g. 0) after the
    first write. Ditto 64-bit prefetchable MMIO.  */
-static void pci_setup_bridge(struct pci_bus *bus)
+static void pci_setup_bridge_io(struct pci_bus *bus)
 {
 	struct pci_dev *bridge = bus->self;
 	struct resource *res;
 	struct pci_bus_region region;
-	u32 l, bu, lu, io_upper16;
-	int pref_mem64;
-
-	if (pci_is_enabled(bridge))
-		return;
-
-	dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
-		 bus->secondary, bus->subordinate);
+	u32 l, io_upper16;
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
 	res = bus->resource[0];
@@ -172,7 +165,13 @@ static void pci_setup_bridge(struct pci_
 	pci_write_config_dword(bridge, PCI_IO_BASE, l);
 	/* Update upper 16 bits of I/O base/limit. */
 	pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
-
+}
+static void pci_setup_bridge_mmio(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	struct resource *res;
+	struct pci_bus_region region;
+	u32 l;
 	/* Set up the top and bottom of the PCI Memory segment
 	   for this bus. */
 	res = bus->resource[1];
@@ -187,6 +186,14 @@ static void pci_setup_bridge(struct pci_
 		dev_info(&bridge->dev, "  bridge window [mem disabled]\n");
 	}
 	pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
+}
+static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
+{
+	struct pci_dev *bridge = bus->self;
+	struct resource *res;
+	struct pci_bus_region region;
+	u32 l, bu, lu;
+	int pref_mem64;
 
 	/* Clear out the upper 32 bits of PREF limit.
 	   If PCI_PREF_BASE_UPPER32 was non-zero, this temporarily
@@ -219,10 +226,37 @@ static void pci_setup_bridge(struct pci_
 		pci_write_config_dword(bridge, PCI_PREF_BASE_UPPER32, bu);
 		pci_write_config_dword(bridge, PCI_PREF_LIMIT_UPPER32, lu);
 	}
+}
+static void __pci_setup_bridge(struct pci_bus *bus, unsigned long type)
+{
+	struct pci_dev *bridge = bus->self;
+
+	if (pci_is_enabled(bridge))
+		return;
+
+	dev_info(&bridge->dev, "PCI bridge to [bus %02x-%02x]\n",
+		 bus->secondary, bus->subordinate);
+
+	if (type & IORESOURCE_IO)
+		pci_setup_bridge_io(bus);
+
+	if (type & IORESOURCE_MEM)
+		pci_setup_bridge_mmio(bus);
+
+	if (type & IORESOURCE_PREFETCH)
+		pci_setup_bridge_mmio_pref(bus);
 
 	pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
 }
 
+static void pci_setup_bridge(struct pci_bus *bus)
+{
+	unsigned long type = IORESOURCE_IO | IORESOURCE_MEM |
+				  IORESOURCE_PREFETCH;
+
+	__pci_setup_bridge(bus, type);
+}
+
 /* Check whether the bridge supports optional I/O and
    prefetchable memory ranges. If not, the respective
    base/limit registers must be read-only and read as 0. */