* [PATCH 0/2 v2] pci: change PCI nomenclature according to PCI-SIG
@ 2009-12-03 11:49 Stefan Assmann
2009-12-03 11:49 ` [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) Stefan Assmann
2009-12-03 11:49 ` [PATCH 2/2 v2] pci: change PCI nomenclature in drivers/pci/ (non-comment changes) Stefan Assmann
0 siblings, 2 replies; 8+ messages in thread
From: Stefan Assmann @ 2009-12-03 11:49 UTC (permalink / raw)
To: linux-pci
Cc: jeff, linux-kernel, jbarnes, rjw, ddutile, kaneshige.kenji,
Stefan Assmann, khc
Hi,
the following patch queue changes variants of PCI-X and PCIe to the terms
listed in the "Trademark and Logo Usage Guidelines".
http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf
Due to comments from Jeff Garzik and others changes are limited to drivers/pci/
for now and split up into comment changes and non-comment changes for easier
reviewing.
Patches are based on 2.6.32.
If this works out I'd like to follow up with patches for the individual
device drivers with the concerning maintainers in Cc.
Stefan
--
Stefan Assmann | Red Hat GmbH
Software Engineer | Otto-Hahn-Strasse 20, 85609 Dornach
| HR: Amtsgericht Muenchen HRB 153243
| GF: Brendan Lane, Charlie Peters,
sassmann at redhat.com | Michael Cunningham, Charles Cachera
^ permalink raw reply [flat|nested] 8+ messages in thread* [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) 2009-12-03 11:49 [PATCH 0/2 v2] pci: change PCI nomenclature according to PCI-SIG Stefan Assmann @ 2009-12-03 11:49 ` Stefan Assmann 2009-12-03 17:04 ` Stefan Assmann 2009-12-16 19:45 ` Jesse Barnes 2009-12-03 11:49 ` [PATCH 2/2 v2] pci: change PCI nomenclature in drivers/pci/ (non-comment changes) Stefan Assmann 1 sibling, 2 replies; 8+ messages in thread From: Stefan Assmann @ 2009-12-03 11:49 UTC (permalink / raw) To: linux-pci Cc: jeff, linux-kernel, jbarnes, rjw, ddutile, kaneshige.kenji, Stefan Assmann, khc From: Stefan Assmann <sassmann@redhat.com> Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern comments only. Signed-off-by: Stefan Assmann <sassmann@redhat.com> --- drivers/pci/hotplug/shpchp.h | 2 +- drivers/pci/intel-iommu.c | 6 +++--- drivers/pci/intr_remapping.c | 2 +- drivers/pci/pci.c | 6 +++--- drivers/pci/pcie/aer/aer_inject.c | 4 ++-- drivers/pci/pcie/aer/aerdrv.c | 2 +- drivers/pci/pcie/aer/aerdrv_acpi.c | 2 +- drivers/pci/pcie/aer/aerdrv_core.c | 6 +++--- drivers/pci/pcie/aspm.c | 4 ++-- drivers/pci/search.c | 6 +++--- 10 files changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index bd588eb..8e210cd 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -121,7 +121,7 @@ struct controller { #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 #define PCI_DEVICE_ID_AMD_POGO_7458 0x7458 -/* AMD PCIX bridge registers */ +/* AMD PCI-X bridge registers */ #define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C #define PCIX_MISCII_OFFSET 0x48 #define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80 diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 1840a05..306a2eb 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -304,7 +304,7 @@ struct device_domain_info { int segment; /* PCI domain */ u8 bus; /* PCI bus number */ u8 devfn; /* PCI devfn number */ - struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */ + struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */ struct intel_iommu *iommu; /* IOMMU used by this device */ struct dmar_domain *domain; /* pointer to domain */ }; @@ -1611,7 +1611,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev, return ret; parent = parent->bus->self; } - if (tmp->is_pcie) /* this is a PCIE-to-PCI bridge */ + if (tmp->is_pcie) /* this is a PCIe-to-PCI bridge */ return domain_context_mapping_one(domain, pci_domain_nr(tmp->subordinate), tmp->subordinate->number, 0, @@ -3317,7 +3317,7 @@ static void iommu_detach_dependent_devices(struct intel_iommu *iommu, parent->devfn); parent = parent->bus->self; } - if (tmp->is_pcie) /* this is a PCIE-to-PCI bridge */ + if (tmp->is_pcie) /* this is a PCIe-to-PCI bridge */ iommu_detach_dev(iommu, tmp->subordinate->number, 0); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index 0ed78a7..cd9712d 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -486,7 +486,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev) bridge = pci_find_upstream_pcie_bridge(dev); if (bridge) { - if (bridge->is_pcie) /* this is a PCIE-to-PCI/PCIX bridge */ + if (bridge->is_pcie) /* this is a PCIe-to-PCI/PCI-X bridge */ set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, (bridge->bus->number << 8) | dev->bus->number); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 4e4c295..4d2c096 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1140,11 +1140,11 @@ pci_disable_device(struct pci_dev *dev) /** * pcibios_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * - * Sets the PCI-E reset state for the device. This is the default + * Sets the PCIe reset state for the device. This is the default * implementation. Architecture implementations can override this. */ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, @@ -1155,7 +1155,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, /** * pci_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 62d15f6..a21dee3 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -1,7 +1,7 @@ /* - * PCIE AER software error injection support. + * PCIe AER software error injection support. * - * Debuging PCIE AER code is quite difficult because it is hard to + * Debuging PCIe AER code is quite difficult because it is hard to * trigger various real hardware errors. Software based error * injection can fake almost all kinds of errors with the help of a * user space helper tool aer-inject, which can be gotten from: diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 40c3cc5..499aacd 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev) mutex_init(&rpc->rpc_mutex); init_waitqueue_head(&rpc->wait_release); - /* Use PCIE bus function to store rpc into PCIE device */ + /* Use PCIe bus function to store rpc into PCIe device */ set_service_data(dev, rpc); return rpc; diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index 8edb2f3..0481408 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -24,7 +24,7 @@ * * @return: Zero on success. Nonzero otherwise. * - * Invoked when PCIE bus loads AER service driver. To avoid conflict with + * Invoked when PCIe bus loads AER service driver. To avoid conflict with * BIOS AER support requires BIOS to yield AER control to OS native driver. **/ int aer_osc_setup(struct pcie_device *pciedev) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 9f5ccbe..9ab97a8 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -603,7 +603,7 @@ static void handle_error_source(struct pcie_device *aerdev, * aer_enable_rootport - enable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus loads AER service driver. + * Invoked when PCIe bus loads AER service driver. */ void aer_enable_rootport(struct aer_rpc *rpc) { @@ -613,7 +613,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) u32 reg32; pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - /* Clear PCIE Capability's Device Status */ + /* Clear PCIe Capability's Device Status */ pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16); pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16); @@ -647,7 +647,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) * disable_root_aer - disable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus unloads AER service driver. + * Invoked when PCIe bus unloads AER service driver. */ static void disable_root_aer(struct aer_rpc *rpc) { diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5b7056c..1dd123e 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1,6 +1,6 @@ /* * File: drivers/pci/pcie/aspm.c - * Enabling PCIE link L0s/L1 state and Clock Power Management + * Enabling PCIe link L0s/L1 state and Clock Power Management * * Copyright (C) 2007 Intel * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) @@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) int pos; u32 reg32; /* - * Some functions in a slot might not all be PCIE functions, + * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot */ list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { diff --git a/drivers/pci/search.c b/drivers/pci/search.c index ec41535..1873188 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -15,9 +15,9 @@ DECLARE_RWSEM(pci_bus_sem); /* - * find the upstream PCIE-to-PCI bridge of a PCI device + * find the upstream PCIe-to-PCI bridge of a PCI device * if the device is PCIE, return NULL - * if the device isn't connected to a PCIE bridge (that is its parent is a + * if the device isn't connected to a PCIe bridge (that is its parent is a * legacy PCI bridge and the bridge is directly connected to bus 0), return its * parent */ @@ -37,7 +37,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev) tmp = pdev; continue; } - /* PCI device should connect to a PCIE bridge */ + /* PCI device should connect to a PCIe bridge */ if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) { /* Busted hardware? */ WARN_ON_ONCE(1); -- 1.6.5.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) 2009-12-03 11:49 ` [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) Stefan Assmann @ 2009-12-03 17:04 ` Stefan Assmann 2009-12-03 17:43 ` Jeff Garzik 2009-12-16 19:45 ` Jesse Barnes 1 sibling, 1 reply; 8+ messages in thread From: Stefan Assmann @ 2009-12-03 17:04 UTC (permalink / raw) To: Stefan Assmann Cc: linux-pci, jeff, linux-kernel, jbarnes, rjw, ddutile, kaneshige.kenji, khc, Andrew Patterson repost with typo "Debuging" fixed as in patch #2. From: Stefan Assmann <sassmann@redhat.com> Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern comments only. Signed-off-by: Stefan Assmann <sassmann@redhat.com> --- drivers/pci/hotplug/shpchp.h | 2 +- drivers/pci/intel-iommu.c | 6 +++--- drivers/pci/intr_remapping.c | 2 +- drivers/pci/pci.c | 6 +++--- drivers/pci/pcie/aer/aer_inject.c | 4 ++-- drivers/pci/pcie/aer/aerdrv.c | 2 +- drivers/pci/pcie/aer/aerdrv_acpi.c | 2 +- drivers/pci/pcie/aer/aerdrv_core.c | 6 +++--- drivers/pci/pcie/aspm.c | 4 ++-- drivers/pci/search.c | 6 +++--- 10 files changed, 20 insertions(+), 20 deletions(-) diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index bd588eb..8e210cd 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -121,7 +121,7 @@ struct controller { #define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450 #define PCI_DEVICE_ID_AMD_POGO_7458 0x7458 -/* AMD PCIX bridge registers */ +/* AMD PCI-X bridge registers */ #define PCIX_MEM_BASE_LIMIT_OFFSET 0x1C #define PCIX_MISCII_OFFSET 0x48 #define PCIX_MISC_BRIDGE_ERRORS_OFFSET 0x80 diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 1840a05..306a2eb 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -304,7 +304,7 @@ struct device_domain_info { int segment; /* PCI domain */ u8 bus; /* PCI bus number */ u8 devfn; /* PCI devfn number */ - struct pci_dev *dev; /* it's NULL for PCIE-to-PCI bridge */ + struct pci_dev *dev; /* it's NULL for PCIe-to-PCI bridge */ struct intel_iommu *iommu; /* IOMMU used by this device */ struct dmar_domain *domain; /* pointer to domain */ }; @@ -1611,7 +1611,7 @@ domain_context_mapping(struct dmar_domain *domain, struct pci_dev *pdev, return ret; parent = parent->bus->self; } - if (tmp->is_pcie) /* this is a PCIE-to-PCI bridge */ + if (tmp->is_pcie) /* this is a PCIe-to-PCI bridge */ return domain_context_mapping_one(domain, pci_domain_nr(tmp->subordinate), tmp->subordinate->number, 0, @@ -3317,7 +3317,7 @@ static void iommu_detach_dependent_devices(struct intel_iommu *iommu, parent->devfn); parent = parent->bus->self; } - if (tmp->is_pcie) /* this is a PCIE-to-PCI bridge */ + if (tmp->is_pcie) /* this is a PCIe-to-PCI bridge */ iommu_detach_dev(iommu, tmp->subordinate->number, 0); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index 0ed78a7..cd9712d 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -486,7 +486,7 @@ int set_msi_sid(struct irte *irte, struct pci_dev *dev) bridge = pci_find_upstream_pcie_bridge(dev); if (bridge) { - if (bridge->is_pcie) /* this is a PCIE-to-PCI/PCIX bridge */ + if (bridge->is_pcie) /* this is a PCIe-to-PCI/PCI-X bridge */ set_irte_sid(irte, SVT_VERIFY_BUS, SQ_ALL_16, (bridge->bus->number << 8) | dev->bus->number); else /* this is a legacy PCI bridge */ diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 4e4c295..4d2c096 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1140,11 +1140,11 @@ pci_disable_device(struct pci_dev *dev) /** * pcibios_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * - * Sets the PCI-E reset state for the device. This is the default + * Sets the PCIe reset state for the device. This is the default * implementation. Architecture implementations can override this. */ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, @@ -1155,7 +1155,7 @@ int __attribute__ ((weak)) pcibios_set_pcie_reset_state(struct pci_dev *dev, /** * pci_set_pcie_reset_state - set reset state for device dev - * @dev: the PCI-E device reset + * @dev: the PCIe device reset * @state: Reset state to enter into * * diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index 62d15f6..a21dee3 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -1,7 +1,7 @@ /* - * PCIE AER software error injection support. + * PCIe AER software error injection support. * - * Debuging PCIE AER code is quite difficult because it is hard to + * Debugging PCIe AER code is quite difficult because it is hard to * trigger various real hardware errors. Software based error * injection can fake almost all kinds of errors with the help of a * user space helper tool aer-inject, which can be gotten from: diff --git a/drivers/pci/pcie/aer/aerdrv.c b/drivers/pci/pcie/aer/aerdrv.c index 40c3cc5..499aacd 100644 --- a/drivers/pci/pcie/aer/aerdrv.c +++ b/drivers/pci/pcie/aer/aerdrv.c @@ -155,7 +155,7 @@ static struct aer_rpc *aer_alloc_rpc(struct pcie_device *dev) mutex_init(&rpc->rpc_mutex); init_waitqueue_head(&rpc->wait_release); - /* Use PCIE bus function to store rpc into PCIE device */ + /* Use PCIe bus function to store rpc into PCIe device */ set_service_data(dev, rpc); return rpc; diff --git a/drivers/pci/pcie/aer/aerdrv_acpi.c b/drivers/pci/pcie/aer/aerdrv_acpi.c index 8edb2f3..0481408 100644 --- a/drivers/pci/pcie/aer/aerdrv_acpi.c +++ b/drivers/pci/pcie/aer/aerdrv_acpi.c @@ -24,7 +24,7 @@ * * @return: Zero on success. Nonzero otherwise. * - * Invoked when PCIE bus loads AER service driver. To avoid conflict with + * Invoked when PCIe bus loads AER service driver. To avoid conflict with * BIOS AER support requires BIOS to yield AER control to OS native driver. **/ int aer_osc_setup(struct pcie_device *pciedev) diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index 9f5ccbe..9ab97a8 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -603,7 +603,7 @@ static void handle_error_source(struct pcie_device *aerdev, * aer_enable_rootport - enable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus loads AER service driver. + * Invoked when PCIe bus loads AER service driver. */ void aer_enable_rootport(struct aer_rpc *rpc) { @@ -613,7 +613,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) u32 reg32; pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); - /* Clear PCIE Capability's Device Status */ + /* Clear PCIe Capability's Device Status */ pci_read_config_word(pdev, pos+PCI_EXP_DEVSTA, ®16); pci_write_config_word(pdev, pos+PCI_EXP_DEVSTA, reg16); @@ -647,7 +647,7 @@ void aer_enable_rootport(struct aer_rpc *rpc) * disable_root_aer - disable Root Port's interrupts when receiving messages * @rpc: pointer to a Root Port data structure * - * Invoked when PCIE bus unloads AER service driver. + * Invoked when PCIe bus unloads AER service driver. */ static void disable_root_aer(struct aer_rpc *rpc) { diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 5b7056c..1dd123e 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -1,6 +1,6 @@ /* * File: drivers/pci/pcie/aspm.c - * Enabling PCIE link L0s/L1 state and Clock Power Management + * Enabling PCIe link L0s/L1 state and Clock Power Management * * Copyright (C) 2007 Intel * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com) @@ -499,7 +499,7 @@ static int pcie_aspm_sanity_check(struct pci_dev *pdev) int pos; u32 reg32; /* - * Some functions in a slot might not all be PCIE functions, + * Some functions in a slot might not all be PCIe functions, * very strange. Disable ASPM for the whole slot */ list_for_each_entry(child, &pdev->subordinate->devices, bus_list) { diff --git a/drivers/pci/search.c b/drivers/pci/search.c index ec41535..1873188 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -15,9 +15,9 @@ DECLARE_RWSEM(pci_bus_sem); /* - * find the upstream PCIE-to-PCI bridge of a PCI device + * find the upstream PCIe-to-PCI bridge of a PCI device * if the device is PCIE, return NULL - * if the device isn't connected to a PCIE bridge (that is its parent is a + * if the device isn't connected to a PCIe bridge (that is its parent is a * legacy PCI bridge and the bridge is directly connected to bus 0), return its * parent */ @@ -37,7 +37,7 @@ pci_find_upstream_pcie_bridge(struct pci_dev *pdev) tmp = pdev; continue; } - /* PCI device should connect to a PCIE bridge */ + /* PCI device should connect to a PCIe bridge */ if (pdev->pcie_type != PCI_EXP_TYPE_PCI_BRIDGE) { /* Busted hardware? */ WARN_ON_ONCE(1); -- 1.6.5.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) 2009-12-03 17:04 ` Stefan Assmann @ 2009-12-03 17:43 ` Jeff Garzik 0 siblings, 0 replies; 8+ messages in thread From: Jeff Garzik @ 2009-12-03 17:43 UTC (permalink / raw) To: Stefan Assmann Cc: linux-pci, linux-kernel, jbarnes, rjw, ddutile, kaneshige.kenji, khc, Andrew Patterson On 12/03/2009 12:04 PM, Stefan Assmann wrote: > repost with typo "Debuging" fixed as in patch #2. > > > From: Stefan Assmann<sassmann@redhat.com> > > Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG > terms listed in the "Trademark and Logo Usage Guidelines". > http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf > > Patch is limited to drivers/pci/ and changes concern comments only. > > Signed-off-by: Stefan Assmann<sassmann@redhat.com> > --- > drivers/pci/hotplug/shpchp.h | 2 +- > drivers/pci/intel-iommu.c | 6 +++--- > drivers/pci/intr_remapping.c | 2 +- > drivers/pci/pci.c | 6 +++--- > drivers/pci/pcie/aer/aer_inject.c | 4 ++-- > drivers/pci/pcie/aer/aerdrv.c | 2 +- > drivers/pci/pcie/aer/aerdrv_acpi.c | 2 +- > drivers/pci/pcie/aer/aerdrv_core.c | 6 +++--- > drivers/pci/pcie/aspm.c | 4 ++-- > drivers/pci/search.c | 6 +++--- > 10 files changed, 20 insertions(+), 20 deletions(-) Thanks for splitting this up. These are definitely much more "digestable" patches. I don't have any objections to these patches, except for previous comments about code churn itself. Up to Jesse... Jeff ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) 2009-12-03 11:49 ` [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) Stefan Assmann 2009-12-03 17:04 ` Stefan Assmann @ 2009-12-16 19:45 ` Jesse Barnes 1 sibling, 0 replies; 8+ messages in thread From: Jesse Barnes @ 2009-12-16 19:45 UTC (permalink / raw) To: Stefan Assmann Cc: linux-pci, jeff, linux-kernel, rjw, ddutile, kaneshige.kenji, Stefan Assmann, khc On Thu, 3 Dec 2009 06:49:24 -0500 Stefan Assmann <sassmann@redhat.com> wrote: > From: Stefan Assmann <sassmann@redhat.com> > > Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG > terms listed in the "Trademark and Logo Usage Guidelines". > http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf > > Patch is limited to drivers/pci/ and changes concern comments only. > > Signed-off-by: Stefan Assmann <sassmann@redhat.com> > --- Applied these, thanks. The second one had a conflict since I had previously applied a hotplug cleanup patch from you, but everything else looked fine. -- Jesse Barnes, Intel Open Source Technology Center ^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/2 v2] pci: change PCI nomenclature in drivers/pci/ (non-comment changes) 2009-12-03 11:49 [PATCH 0/2 v2] pci: change PCI nomenclature according to PCI-SIG Stefan Assmann 2009-12-03 11:49 ` [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) Stefan Assmann @ 2009-12-03 11:49 ` Stefan Assmann 2009-12-03 16:27 ` Andrew Patterson 1 sibling, 1 reply; 8+ messages in thread From: Stefan Assmann @ 2009-12-03 11:49 UTC (permalink / raw) To: linux-pci Cc: jeff, linux-kernel, jbarnes, rjw, ddutile, kaneshige.kenji, Stefan Assmann, khc From: Stefan Assmann <sassmann@redhat.com> Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern non-comment parts or anything that might be visible to the user. Signed-off-by: Stefan Assmann <sassmann@redhat.com> --- drivers/pci/hotplug/pci_hotplug_core.c | 22 +++++++++++----------- drivers/pci/pcie/aer/Kconfig.debug | 4 ++-- drivers/pci/pcie/aer/aer_inject.c | 2 +- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- drivers/pci/pcie/portdrv_pci.c | 2 +- 5 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 0325d98..38183a5 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -68,26 +68,26 @@ static DEFINE_MUTEX(pci_hp_mutex); static char *pci_bus_speed_strings[] = { "33 MHz PCI", /* 0x00 */ "66 MHz PCI", /* 0x01 */ - "66 MHz PCIX", /* 0x02 */ - "100 MHz PCIX", /* 0x03 */ - "133 MHz PCIX", /* 0x04 */ + "66 MHz PCI-X", /* 0x02 */ + "100 MHz PCI-X", /* 0x03 */ + "133 MHz PCI-X", /* 0x04 */ NULL, /* 0x05 */ NULL, /* 0x06 */ NULL, /* 0x07 */ NULL, /* 0x08 */ - "66 MHz PCIX 266", /* 0x09 */ - "100 MHz PCIX 266", /* 0x0a */ - "133 MHz PCIX 266", /* 0x0b */ + "66 MHz PCI-X 266", /* 0x09 */ + "100 MHz PCI-X 266", /* 0x0a */ + "133 MHz PCI-X 266", /* 0x0b */ NULL, /* 0x0c */ NULL, /* 0x0d */ NULL, /* 0x0e */ NULL, /* 0x0f */ NULL, /* 0x10 */ - "66 MHz PCIX 533", /* 0x11 */ - "100 MHz PCIX 533", /* 0x12 */ - "133 MHz PCIX 533", /* 0x13 */ - "2.5 GT/s PCI-E", /* 0x14 */ - "5.0 GT/s PCI-E", /* 0x15 */ + "66 MHz PCI-X 533", /* 0x11 */ + "100 MHz PCI-X 533", /* 0x12 */ + "133 MHz PCI-X 533", /* 0x13 */ + "2.5 GT/s PCIe", /* 0x14 */ + "5.0 GT/s PCIe", /* 0x15 */ }; #ifdef CONFIG_HOTPLUG_PCI_CPCI diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug index b8c925c..edfe756 100644 --- a/drivers/pci/pcie/aer/Kconfig.debug +++ b/drivers/pci/pcie/aer/Kconfig.debug @@ -3,14 +3,14 @@ # config PCIEAER_INJECT - tristate "PCIE AER error injector support" + tristate "PCIe AER error injector support" depends on PCIEAER default n help This enables PCI Express Root Port Advanced Error Reporting (AER) software error injector. - Debuging PCIE AER code is quite difficult because it is hard + Debuging PCIe AER code is quite difficult because it is hard to trigger various real hardware errors. Software based error injection can fake almost all kinds of errors with the help of a user space helper tool aer-inject, which can be diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index a21dee3..8e056f2 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -462,5 +462,5 @@ static void __exit aer_inject_exit(void) module_init(aer_inject_init); module_exit(aer_inject_exit); -MODULE_DESCRIPTION("PCIE AER software error injector"); +MODULE_DESCRIPTION("PCIe AER software error injector"); MODULE_LICENSE("GPL"); diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 44acde7..9d3e4c8 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) if (info->status == 0) { AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=Unaccessible, " + "PCIe Bus Error: severity=%s, type=Unaccessible, " "id=%04x(Unregistered Agent ID)\n", aer_error_severity_string[info->severity], id); } else { @@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) agent = AER_GET_AGENT(info->severity, info->status); AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n", + "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", aer_error_severity_string[info->severity], aer_error_layer[layer], id, aer_agent_string[agent]); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index f635e47..6788d0f 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -24,7 +24,7 @@ */ #define DRIVER_VERSION "v1.0" #define DRIVER_AUTHOR "tom.l.nguyen@intel.com" -#define DRIVER_DESC "PCIE Port Bus Driver" +#define DRIVER_DESC "PCIe Port Bus Driver" MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -- 1.6.5.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2 v2] pci: change PCI nomenclature in drivers/pci/ (non-comment changes) 2009-12-03 11:49 ` [PATCH 2/2 v2] pci: change PCI nomenclature in drivers/pci/ (non-comment changes) Stefan Assmann @ 2009-12-03 16:27 ` Andrew Patterson 2009-12-03 17:00 ` Stefan Assmann 0 siblings, 1 reply; 8+ messages in thread From: Andrew Patterson @ 2009-12-03 16:27 UTC (permalink / raw) To: Stefan Assmann Cc: linux-pci, jeff, linux-kernel, jbarnes, rjw, ddutile, kaneshige.kenji, khc On Thu, 2009-12-03 at 06:49 -0500, Stefan Assmann wrote: > From: Stefan Assmann <sassmann@redhat.com> > > Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG > terms listed in the "Trademark and Logo Usage Guidelines". > http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf > > Patch is limited to drivers/pci/ and changes concern non-comment parts or > anything that might be visible to the user. > > Signed-off-by: Stefan Assmann <sassmann@redhat.com> > --- > drivers/pci/hotplug/pci_hotplug_core.c | 22 +++++++++++----------- > drivers/pci/pcie/aer/Kconfig.debug | 4 ++-- > drivers/pci/pcie/aer/aer_inject.c | 2 +- > drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- > drivers/pci/pcie/portdrv_pci.c | 2 +- > 5 files changed, 17 insertions(+), 17 deletions(-) > > diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c > index 0325d98..38183a5 100644 > --- a/drivers/pci/hotplug/pci_hotplug_core.c > +++ b/drivers/pci/hotplug/pci_hotplug_core.c > @@ -68,26 +68,26 @@ static DEFINE_MUTEX(pci_hp_mutex); > static char *pci_bus_speed_strings[] = { > "33 MHz PCI", /* 0x00 */ > "66 MHz PCI", /* 0x01 */ > - "66 MHz PCIX", /* 0x02 */ > - "100 MHz PCIX", /* 0x03 */ > - "133 MHz PCIX", /* 0x04 */ > + "66 MHz PCI-X", /* 0x02 */ > + "100 MHz PCI-X", /* 0x03 */ > + "133 MHz PCI-X", /* 0x04 */ > NULL, /* 0x05 */ > NULL, /* 0x06 */ > NULL, /* 0x07 */ > NULL, /* 0x08 */ > - "66 MHz PCIX 266", /* 0x09 */ > - "100 MHz PCIX 266", /* 0x0a */ > - "133 MHz PCIX 266", /* 0x0b */ > + "66 MHz PCI-X 266", /* 0x09 */ > + "100 MHz PCI-X 266", /* 0x0a */ > + "133 MHz PCI-X 266", /* 0x0b */ > NULL, /* 0x0c */ > NULL, /* 0x0d */ > NULL, /* 0x0e */ > NULL, /* 0x0f */ > NULL, /* 0x10 */ > - "66 MHz PCIX 533", /* 0x11 */ > - "100 MHz PCIX 533", /* 0x12 */ > - "133 MHz PCIX 533", /* 0x13 */ > - "2.5 GT/s PCI-E", /* 0x14 */ > - "5.0 GT/s PCI-E", /* 0x15 */ > + "66 MHz PCI-X 533", /* 0x11 */ > + "100 MHz PCI-X 533", /* 0x12 */ > + "133 MHz PCI-X 533", /* 0x13 */ > + "2.5 GT/s PCIe", /* 0x14 */ > + "5.0 GT/s PCIe", /* 0x15 */ > }; > > #ifdef CONFIG_HOTPLUG_PCI_CPCI > diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug > index b8c925c..edfe756 100644 > --- a/drivers/pci/pcie/aer/Kconfig.debug > +++ b/drivers/pci/pcie/aer/Kconfig.debug > @@ -3,14 +3,14 @@ > # > > config PCIEAER_INJECT > - tristate "PCIE AER error injector support" > + tristate "PCIe AER error injector support" > depends on PCIEAER > default n > help > This enables PCI Express Root Port Advanced Error Reporting > (AER) software error injector. > > - Debuging PCIE AER code is quite difficult because it is hard > + Debuging PCIe AER code is quite difficult because it is hard Why not fix the typo while changing this line. "Debuging" shoud be "Debugging". > to trigger various real hardware errors. Software based > error injection can fake almost all kinds of errors with the > help of a user space helper tool aer-inject, which can be > diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c > index a21dee3..8e056f2 100644 > --- a/drivers/pci/pcie/aer/aer_inject.c > +++ b/drivers/pci/pcie/aer/aer_inject.c > @@ -462,5 +462,5 @@ static void __exit aer_inject_exit(void) > module_init(aer_inject_init); > module_exit(aer_inject_exit); > > -MODULE_DESCRIPTION("PCIE AER software error injector"); > +MODULE_DESCRIPTION("PCIe AER software error injector"); > MODULE_LICENSE("GPL"); > diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c > index 44acde7..9d3e4c8 100644 > --- a/drivers/pci/pcie/aer/aerdrv_errprint.c > +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c > @@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) > > if (info->status == 0) { > AER_PR(info, dev, > - "PCIE Bus Error: severity=%s, type=Unaccessible, " > + "PCIe Bus Error: severity=%s, type=Unaccessible, " > "id=%04x(Unregistered Agent ID)\n", > aer_error_severity_string[info->severity], id); > } else { > @@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) > agent = AER_GET_AGENT(info->severity, info->status); > > AER_PR(info, dev, > - "PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n", > + "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", > aer_error_severity_string[info->severity], > aer_error_layer[layer], id, aer_agent_string[agent]); > > diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c > index f635e47..6788d0f 100644 > --- a/drivers/pci/pcie/portdrv_pci.c > +++ b/drivers/pci/pcie/portdrv_pci.c > @@ -24,7 +24,7 @@ > */ > #define DRIVER_VERSION "v1.0" > #define DRIVER_AUTHOR "tom.l.nguyen@intel.com" > -#define DRIVER_DESC "PCIE Port Bus Driver" > +#define DRIVER_DESC "PCIe Port Bus Driver" > MODULE_AUTHOR(DRIVER_AUTHOR); > MODULE_DESCRIPTION(DRIVER_DESC); > MODULE_LICENSE("GPL"); -- Andrew Patterson Hewlett-Packard ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 2/2 v2] pci: change PCI nomenclature in drivers/pci/ (non-comment changes) 2009-12-03 16:27 ` Andrew Patterson @ 2009-12-03 17:00 ` Stefan Assmann 0 siblings, 0 replies; 8+ messages in thread From: Stefan Assmann @ 2009-12-03 17:00 UTC (permalink / raw) To: Andrew Patterson Cc: linux-pci, jeff, linux-kernel, jbarnes, rjw, ddutile, kaneshige.kenji, khc On 03.12.2009 17:27, Andrew Patterson wrote: > On Thu, 2009-12-03 at 06:49 -0500, Stefan Assmann wrote: >> From: Stefan Assmann <sassmann@redhat.com> >> >> Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG >> terms listed in the "Trademark and Logo Usage Guidelines". >> http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf >> >> Patch is limited to drivers/pci/ and changes concern non-comment parts or >> anything that might be visible to the user. >> >> Signed-off-by: Stefan Assmann <sassmann@redhat.com> >> --- [...] >> diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug >> index b8c925c..edfe756 100644 >> --- a/drivers/pci/pcie/aer/Kconfig.debug >> +++ b/drivers/pci/pcie/aer/Kconfig.debug >> @@ -3,14 +3,14 @@ >> # >> >> config PCIEAER_INJECT >> - tristate "PCIE AER error injector support" >> + tristate "PCIe AER error injector support" >> depends on PCIEAER >> default n >> help >> This enables PCI Express Root Port Advanced Error Reporting >> (AER) software error injector. >> >> - Debuging PCIE AER code is quite difficult because it is hard >> + Debuging PCIe AER code is quite difficult because it is hard > > Why not fix the typo while changing this line. "Debuging" shoud be > "Debugging". > Thanks Andrew, I just didn't see it. Here's the new patch. Patch #1 has the same typo, so I'll repost that one as well. Stefan From: Stefan Assmann <sassmann@redhat.com> Changing occurrences of variants of PCI-X and PCIe to the PCI-SIG terms listed in the "Trademark and Logo Usage Guidelines". http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf Patch is limited to drivers/pci/ and changes concern non-comment parts or anything that might be visible to the user. Signed-off-by: Stefan Assmann <sassmann@redhat.com> --- drivers/pci/hotplug/pci_hotplug_core.c | 22 +++++++++++----------- drivers/pci/pcie/aer/Kconfig.debug | 4 ++-- drivers/pci/pcie/aer/aer_inject.c | 2 +- drivers/pci/pcie/aer/aerdrv_errprint.c | 4 ++-- drivers/pci/pcie/portdrv_pci.c | 2 +- 5 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 0325d98..38183a5 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -68,26 +68,26 @@ static DEFINE_MUTEX(pci_hp_mutex); static char *pci_bus_speed_strings[] = { "33 MHz PCI", /* 0x00 */ "66 MHz PCI", /* 0x01 */ - "66 MHz PCIX", /* 0x02 */ - "100 MHz PCIX", /* 0x03 */ - "133 MHz PCIX", /* 0x04 */ + "66 MHz PCI-X", /* 0x02 */ + "100 MHz PCI-X", /* 0x03 */ + "133 MHz PCI-X", /* 0x04 */ NULL, /* 0x05 */ NULL, /* 0x06 */ NULL, /* 0x07 */ NULL, /* 0x08 */ - "66 MHz PCIX 266", /* 0x09 */ - "100 MHz PCIX 266", /* 0x0a */ - "133 MHz PCIX 266", /* 0x0b */ + "66 MHz PCI-X 266", /* 0x09 */ + "100 MHz PCI-X 266", /* 0x0a */ + "133 MHz PCI-X 266", /* 0x0b */ NULL, /* 0x0c */ NULL, /* 0x0d */ NULL, /* 0x0e */ NULL, /* 0x0f */ NULL, /* 0x10 */ - "66 MHz PCIX 533", /* 0x11 */ - "100 MHz PCIX 533", /* 0x12 */ - "133 MHz PCIX 533", /* 0x13 */ - "2.5 GT/s PCI-E", /* 0x14 */ - "5.0 GT/s PCI-E", /* 0x15 */ + "66 MHz PCI-X 533", /* 0x11 */ + "100 MHz PCI-X 533", /* 0x12 */ + "133 MHz PCI-X 533", /* 0x13 */ + "2.5 GT/s PCIe", /* 0x14 */ + "5.0 GT/s PCIe", /* 0x15 */ }; #ifdef CONFIG_HOTPLUG_PCI_CPCI diff --git a/drivers/pci/pcie/aer/Kconfig.debug b/drivers/pci/pcie/aer/Kconfig.debug index b8c925c..edfe756 100644 --- a/drivers/pci/pcie/aer/Kconfig.debug +++ b/drivers/pci/pcie/aer/Kconfig.debug @@ -3,14 +3,14 @@ # config PCIEAER_INJECT - tristate "PCIE AER error injector support" + tristate "PCIe AER error injector support" depends on PCIEAER default n help This enables PCI Express Root Port Advanced Error Reporting (AER) software error injector. - Debuging PCIE AER code is quite difficult because it is hard + Debugging PCIe AER code is quite difficult because it is hard to trigger various real hardware errors. Software based error injection can fake almost all kinds of errors with the help of a user space helper tool aer-inject, which can be diff --git a/drivers/pci/pcie/aer/aer_inject.c b/drivers/pci/pcie/aer/aer_inject.c index a21dee3..8e056f2 100644 --- a/drivers/pci/pcie/aer/aer_inject.c +++ b/drivers/pci/pcie/aer/aer_inject.c @@ -462,5 +462,5 @@ static void __exit aer_inject_exit(void) module_init(aer_inject_init); module_exit(aer_inject_exit); -MODULE_DESCRIPTION("PCIE AER software error injector"); +MODULE_DESCRIPTION("PCIe AER software error injector"); MODULE_LICENSE("GPL"); diff --git a/drivers/pci/pcie/aer/aerdrv_errprint.c b/drivers/pci/pcie/aer/aerdrv_errprint.c index 44acde7..9d3e4c8 100644 --- a/drivers/pci/pcie/aer/aerdrv_errprint.c +++ b/drivers/pci/pcie/aer/aerdrv_errprint.c @@ -184,7 +184,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) if (info->status == 0) { AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=Unaccessible, " + "PCIe Bus Error: severity=%s, type=Unaccessible, " "id=%04x(Unregistered Agent ID)\n", aer_error_severity_string[info->severity], id); } else { @@ -194,7 +194,7 @@ void aer_print_error(struct pci_dev *dev, struct aer_err_info *info) agent = AER_GET_AGENT(info->severity, info->status); AER_PR(info, dev, - "PCIE Bus Error: severity=%s, type=%s, id=%04x(%s)\n", + "PCIe Bus Error: severity=%s, type=%s, id=%04x(%s)\n", aer_error_severity_string[info->severity], aer_error_layer[layer], id, aer_agent_string[agent]); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index f635e47..6788d0f 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -24,7 +24,7 @@ */ #define DRIVER_VERSION "v1.0" #define DRIVER_AUTHOR "tom.l.nguyen@intel.com" -#define DRIVER_DESC "PCIE Port Bus Driver" +#define DRIVER_DESC "PCIe Port Bus Driver" MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); -- 1.6.5.2 ^ permalink raw reply related [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-12-16 19:45 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-12-03 11:49 [PATCH 0/2 v2] pci: change PCI nomenclature according to PCI-SIG Stefan Assmann 2009-12-03 11:49 ` [PATCH 1/2 v2] pci: change PCI nomenclature in drivers/pci/ (comment changes) Stefan Assmann 2009-12-03 17:04 ` Stefan Assmann 2009-12-03 17:43 ` Jeff Garzik 2009-12-16 19:45 ` Jesse Barnes 2009-12-03 11:49 ` [PATCH 2/2 v2] pci: change PCI nomenclature in drivers/pci/ (non-comment changes) Stefan Assmann 2009-12-03 16:27 ` Andrew Patterson 2009-12-03 17:00 ` Stefan Assmann
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox