Intel Poulsbo [psb] driver for Asus Eeepc 1101

Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zeno Davatz]

Hi

I am looking for the Asus Eeepc Poulsbo (psb) driver in Kernel
2.6.32-rc7. When is this driver expected to make it into the kernel?

At the moment I am getting following error:

 CC [M]  /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.o
  CC [M]  /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_bo.o
/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:
In function 'drm_ttm_ipi_handler':
/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:35:
error: implicit declaration of function 'flush_agp_cache'
/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:
In function 'drm_set_caching':
/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:116:
error: implicit declaration of function 'map_page_into_agp'
/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:118:
error: implicit declaration of function 'unmap_page_from_agp'
make[2]: *** [/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.o]
Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [_module_/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1]
Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.32-rc7'
make: *** [modules] Error 2
 * ERROR: x11-drivers/psb-kmod-4.41.1_p10 failed:
 *   (no error message)
 *
 * Call stack:
 *     ebuild.sh, line  49:  Called src_compile
 *   environment, line 3471:  Called die
 * The specific snippet of code:
 *       LINUXDIR=/usr/src/linux emake DRM_MODULES=psb || die
 *

When trying to use the driver from:

http://www.happyassassin.net/2009/09/26/gma-500-poulsbo-driver-for-fedora-11-soon-to-be-in-rpm-fusion/comment-page-1/#comment-1005

I would prefer to install the driver directly from the kernel.

Thank you for your Feedback.

Let me know if you need my .config.

Best
Zeno

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Éric Piel]

Op 19-11-09 09:52, Zeno Davatz schreef:
> Hi
> 
> I am looking for the Asus Eeepc Poulsbo (psb) driver in Kernel
> 2.6.32-rc7. When is this driver expected to make it into the kernel?
> 
> At the moment I am getting following error:
> 
>  CC [M]  /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.o
>   CC [M]  /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_bo.o
> /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:
> In function 'drm_ttm_ipi_handler':
> /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:35:
> error: implicit declaration of function 'flush_agp_cache'
> /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:
> In function 'drm_set_caching':
> /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:116:
> error: implicit declaration of function 'map_page_into_agp'
> /var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.c:118:
> error: implicit declaration of function 'unmap_page_from_agp'
> make[2]: *** [/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1/drm_ttm.o]
> Error 1
> make[2]: *** Waiting for unfinished jobs....
> make[1]: *** [_module_/var/tmp/portage/x11-drivers/psb-kmod-4.41.1_p10/work/psb-kernel-source-4.41.1]
> Error 2
> make[1]: Leaving directory `/usr/src/linux-2.6.32-rc7'
> make: *** [modules] Error 2
Hi,
I'd also be interested by a patch to get the psb kernel module to
compile with 2.6.32. If anyone has this already available, please post it!
Or maybe someone knows what should be done to fix this type of errors?

Thanks,
Eric

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Éric Piel]

Op 19-11-09 15:28, Éric Piel schreef:
> Op 19-11-09 09:52, Zeno Davatz schreef:
>> Hi
>>
>> I am looking for the Asus Eeepc Poulsbo (psb) driver in Kernel
>> 2.6.32-rc7. When is this driver expected to make it into the kernel?
:
> Hi,
> I'd also be interested by a patch to get the psb kernel module to
> compile with 2.6.32. If anyone has this already available, please post it!
> Or maybe someone knows what should be done to fix this type of errors?
Hello,

I've just noticed that Zac Medico has written the fixes (as sed scripts)
for the psb driver in gentoo. Below is the patch version of his fixes.
It works for me :-)

Thanks Zac!
See you,
Eric

8<--------------------------------------------------
psb: Fix compilation with kernel 2.6.32

This patch made from the Gentoo ebuild written by Zac Medico <zmedico@gentoo.org>,
to fix compilation of the psb module with kernel 2.6.32

It should be safe to be used with older version of the kernel. It fixes two changes:
 * In commit 6a12235c7d2d75c7d94b9afcaaecd422ff845ce0 phys_to_gart was removed
   since it is a 1:1 mapping on all platforms.
 * The acpi PREFIX constant is gone.

---
diff -urP psb-4.41.1-4mdv2010.0.orig/drm_agpsupport.c psb-4.41.1-4mdv2010.0.fix2632/drm_agpsupport.c
--- psb-4.41.1-4mdv2010.0.orig/drm_agpsupport.c	2009-10-08 12:09:11.000000000 +0200
+++ psb-4.41.1-4mdv2010.0.fix2632/drm_agpsupport.c	2009-12-05 02:46:28.000421027 +0100
@@ -524,7 +524,7 @@
 	DRM_DEBUG("Current page count is %ld\n", (long) mem->page_count);
 	mem->page_count = 0;
 	for (cur_page = pages; cur_page < last_page; ++cur_page)
-		mem->pages[mem->page_count++] = phys_to_gart(page_to_phys(*cur_page));
+		mem->pages[mem->page_count++] = page_to_phys(*cur_page);
 	agp_be->mem = mem;
 	return 0;
 }
diff -urP psb-4.41.1-4mdv2010.0.orig/drm_edid.c psb-4.41.1-4mdv2010.0.fix2632/drm_edid.c
--- psb-4.41.1-4mdv2010.0.orig/drm_edid.c	2009-10-08 12:09:11.000000000 +0200
+++ psb-4.41.1-4mdv2010.0.fix2632/drm_edid.c	2009-12-05 02:46:38.155168734 +0100
@@ -39,7 +39,7 @@
 	if (obj && obj->type == ACPI_TYPE_BUFFER)
 		memcpy(edid, obj->buffer.pointer, obj->buffer.length);
 	else {
-		printk(KERN_ERR PREFIX "Invalid _DDC data\n");
+		printk(KERN_ERR "ACPI: " "Invalid _DDC data\n");
 		status = -EFAULT;
 		kfree(obj);
 	}

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zeno Davatz]

On Sat, Dec 5, 2009 at 1:35 PM, Éric Piel <Eric.Piel@tremplin-utc.net> wrote:
> Op 19-11-09 15:28, Éric Piel schreef:
>> Op 19-11-09 09:52, Zeno Davatz schreef:
>>> Hi
>>>
>>> I am looking for the Asus Eeepc Poulsbo (psb) driver in Kernel
>>> 2.6.32-rc7. When is this driver expected to make it into the kernel?
> :
>> Hi,
>> I'd also be interested by a patch to get the psb kernel module to
>> compile with 2.6.32. If anyone has this already available, please post it!
>> Or maybe someone knows what should be done to fix this type of errors?
> Hello,
>
> I've just noticed that Zac Medico has written the fixes (as sed scripts)
> for the psb driver in gentoo. Below is the patch version of his fixes.
> It works for me :-)

Ok, it does compile but when I insert the module I get:

psb: Unknown symbol i2c_bit_add_bus

I got the exact same error with 2.6.29

Best
Zeno

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zac Medico]

Zeno Davatz wrote:
> Ok, it does compile but when I insert the module I get:
> 
> psb: Unknown symbol i2c_bit_add_bus

This might solve it:

  modprobe i2c_algo_bit

That module comes from CONFIG_I2C_ALGOBIT=m in your kernel config.
-- 
Thanks,
Zac

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zeno Davatz]

On Sun, Dec 6, 2009 at 5:24 PM, Zac Medico <zmedico@gentoo.org> wrote:
> Zeno Davatz wrote:
>> Ok, it does compile but when I insert the module I get:
>>
>> psb: Unknown symbol i2c_bit_add_bus
>
> This might solve it:
>
>  modprobe i2c_algo_bit
>
> That module comes from CONFIG_I2C_ALGOBIT=m in your kernel config.

Yes, thanks. That helped another step. I am getting the correct screen
resolution after enabling that in the kernel as well. The boot [ok]
messages of Gentoo are in a higher resolution now though. That is a
good start.

But after my X starts I get a black screen with a

-

in the top left corner. They keyboard also does not work. May be an
X.org config problem.

Also this is in my /var/log/messages

[    6.348077] [drm:psb_do_init] *ERROR* Debug is 0x00000000

Best
Zeno

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Éric Piel]

Op 06-12-09 17:35, Zeno Davatz schreef:
:
> Yes, thanks. That helped another step. I am getting the correct screen
> resolution after enabling that in the kernel as well. The boot [ok]
> messages of Gentoo are in a higher resolution now though. That is a
> good start.
>
> But after my X starts I get a black screen with a
>
> -
>
> in the top left corner. They keyboard also does not work. May be an
> X.org config problem.
>
I've got similar behaviour here if psb is loaded before the X server 
starts (aka there is a framebuffer). If the console is just ascii (no 
vga=... argument on the kernel boot line, and no "modprobe psb"), then X 
starts fine.

Eric

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zeno Davatz]

On Mon, Dec 7, 2009 at 12:05 AM, Éric Piel <Eric.Piel@tremplin-utc.net> wrote:
> Op 06-12-09 17:35, Zeno Davatz schreef:
> :
>>
>> Yes, thanks. That helped another step. I am getting the correct screen
>> resolution after enabling that in the kernel as well. The boot [ok]
>> messages of Gentoo are in a higher resolution now though. That is a
>> good start.
>>
>> But after my X starts I get a black screen with a
>>
>> -
>>
>> in the top left corner. They keyboard also does not work. May be an
>> X.org config problem.
>>
> I've got similar behaviour here if psb is loaded before the X server starts
> (aka there is a framebuffer). If the console is just ascii (no vga=...
> argument on the kernel boot line, and no "modprobe psb"), then X starts
> fine.

When I do X -configure I also get:

X: symbol lookup error: /usr/lib/xorg/modules/drivers/psb_drv.so:
undefined symbol: LoaderRefSymLists

Let me know if you need any other info.

I will now try Eric's version from above.

Best
Zeno

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zeno Davatz]

On Mon, Dec 7, 2009 at 12:05 AM, Éric Piel <Eric.Piel@tremplin-utc.net> wrote:
> Op 06-12-09 17:35, Zeno Davatz schreef:
> :
>>
>> Yes, thanks. That helped another step. I am getting the correct screen
>> resolution after enabling that in the kernel as well. The boot [ok]
>> messages of Gentoo are in a higher resolution now though. That is a
>> good start.
>>
>> But after my X starts I get a black screen with a
>>
>> -
>>
>> in the top left corner. They keyboard also does not work. May be an
>> X.org config problem.
>>
> I've got similar behaviour here if psb is loaded before the X server starts
> (aka there is a framebuffer). If the console is just ascii (no vga=...
> argument on the kernel boot line, and no "modprobe psb"), then X starts
> fine.

What are the exact options that you are using for "no vga"?

My terminal seems to automatically load "psb". I have no modprobe
loading "psb" explicitly.

Best
Zeno

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Éric Piel]

Op 07-12-09 10:43, Zeno Davatz schreef:
> On Mon, Dec 7, 2009 at 12:05 AM, Éric Piel <Eric.Piel@tremplin-utc.net> wrote:
>> Op 06-12-09 17:35, Zeno Davatz schreef:
>> :
>>> Yes, thanks. That helped another step. I am getting the correct screen
>>> resolution after enabling that in the kernel as well. The boot [ok]
>>> messages of Gentoo are in a higher resolution now though. That is a
>>> good start.
>>>
>>> But after my X starts I get a black screen with a
>>>
>>> -
>>>
>>> in the top left corner. They keyboard also does not work. May be an
>>> X.org config problem.
>>>
>> I've got similar behaviour here if psb is loaded before the X server starts
>> (aka there is a framebuffer). If the console is just ascii (no vga=...
>> argument on the kernel boot line, and no "modprobe psb"), then X starts
>> fine.
> 
> What are the exact options that you are using for "no vga"?
> 
> My terminal seems to automatically load "psb". I have no modprobe
> loading "psb" explicitly.
> 
Well, I don't know exactly how it works, probably it's part of the
initrd. Here, on Mandriva, if I remove the "vga" argument, it
automatically stays in ascii mode.

You could use lsinitrd to check your initrd.
Eric

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zeno Davatz]

On Mon, Dec 7, 2009 at 10:51 AM, Éric Piel <eric.piel@tremplin-utc.net> wrote:
> Op 07-12-09 10:43, Zeno Davatz schreef:
>> On Mon, Dec 7, 2009 at 12:05 AM, Éric Piel <Eric.Piel@tremplin-utc.net> wrote:
>>> Op 06-12-09 17:35, Zeno Davatz schreef:
>>> :
>>>> Yes, thanks. That helped another step. I am getting the correct screen
>>>> resolution after enabling that in the kernel as well. The boot [ok]
>>>> messages of Gentoo are in a higher resolution now though. That is a
>>>> good start.
>>>>
>>>> But after my X starts I get a black screen with a
>>>>
>>>> -
>>>>
>>>> in the top left corner. They keyboard also does not work. May be an
>>>> X.org config problem.
>>>>
>>> I've got similar behaviour here if psb is loaded before the X server starts
>>> (aka there is a framebuffer). If the console is just ascii (no vga=...
>>> argument on the kernel boot line, and no "modprobe psb"), then X starts
>>> fine.
>>
>> What are the exact options that you are using for "no vga"?
>>
>> My terminal seems to automatically load "psb". I have no modprobe
>> loading "psb" explicitly.
>>
> Well, I don't know exactly how it works, probably it's part of the
> initrd. Here, on Mandriva, if I remove the "vga" argument, it
> automatically stays in ascii mode.

Not the same on Gentoo. I think I have to find the kernel boot-option
that I can pass to lilo.

Also: When I force remove the modules psb and drm_psb with "rmmod -f"
and then start X I get the same error:

X: symbol lookup error: /usr/lib/xorg/modules/drivers/psb_drv.so:
undefined symbol: LoaderRefSymLists

X just does not yet like psb.

;)

Best
Zeno

[OT] Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Éric Piel]

Op 07-12-09 11:02, Zeno Davatz schreef:
:
> Not the same on Gentoo. I think I have to find the kernel boot-option
> that I can pass to lilo.
> 
> Also: When I force remove the modules psb and drm_psb with "rmmod -f"
> and then start X I get the same error:
> 
> X: symbol lookup error: /usr/lib/xorg/modules/drivers/psb_drv.so:
> undefined symbol: LoaderRefSymLists
> 
> X just does not yet like psb.
You are also aware that it does not work on Xserver 1.7, right? 1.6 is
the the maximum.

See you
Eric

Re: [OT] Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zeno Davatz]

On Mon, Dec 7, 2009 at 11:09 AM, Éric Piel <eric.piel@tremplin-utc.net> wrote:
> Op 07-12-09 11:02, Zeno Davatz schreef:
> :
>> Not the same on Gentoo. I think I have to find the kernel boot-option
>> that I can pass to lilo.
>>
>> Also: When I force remove the modules psb and drm_psb with "rmmod -f"
>> and then start X I get the same error:
>>
>> X: symbol lookup error: /usr/lib/xorg/modules/drivers/psb_drv.so:
>> undefined symbol: LoaderRefSymLists
>>
>> X just does not yet like psb.
> You are also aware that it does not work on Xserver 1.7, right? 1.6 is
> the the maximum.

Thanks. I thought it should work with 1.7 as well. Will try that then.

Best
Zeno

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Zeno Davatz]

[-- Attachment #1: Type: text/plain, Size: 906 bytes --]

On Sat, Dec 5, 2009 at 1:35 PM, Éric Piel <Eric.Piel@tremplin-utc.net> wrote:
> Op 19-11-09 15:28, Éric Piel schreef:
>> Op 19-11-09 09:52, Zeno Davatz schreef:
>>> Hi
>>>
>>> I am looking for the Asus Eeepc Poulsbo (psb) driver in Kernel
>>> 2.6.32-rc7. When is this driver expected to make it into the kernel?
> :
>> Hi,
>> I'd also be interested by a patch to get the psb kernel module to
>> compile with 2.6.32. If anyone has this already available, please post it!
>> Or maybe someone knows what should be done to fix this type of errors?
> Hello,
>
> I've just noticed that Zac Medico has written the fixes (as sed scripts)
> for the psb driver in gentoo. Below is the patch version of his fixes.
> It works for me :-)

compiles fine. But I still get:

psb: Unknown symbol i2c_bit_add_bus

when inserting the module.

And this is my Xorg.0.log- see attachment.

Best
Zeno

[-- Attachment #2: Xorg.0.log --]
[-- Type: text/plain, Size: 4763 bytes --]


X.Org X Server 1.7.1
Release Date: 2009-10-23
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-rc7 i686 
Current Operating System: Linux zdavatz-eeepc 2.6.32 #12 SMP Fri Dec 4 20:32:04 CET 2009 i686
Kernel command line: BOOT_IMAGE=2.6.32 ro root=803 elevator=noop
Build Date: 17 November 2009  02:02:11PM
 
Current version of pixman: 0.16.2
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec  6 16:42:35 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Keyboard"
(**) |-->Input Device "Synaptics Touchpad"
(**) |-->Input Device "Configured Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "no"
(**) Not automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/,
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Duplicate core pointer devices.  Removing core pointer attribute from "Configured Mouse"
(II) Loader magic: 0x81e7e60
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.4
	X.Org Video Driver: 6.0
	X.Org XInput driver : 7.0
	X.Org Server Extension : 2.0
(++) using VT number 7

(--) PCI:*(0:0:2:0) 8086:8108:1043:83ce Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller rev 7, Mem @ 0xf3f80000/524288, 0xd0000000/268435456, 0xf3f40000/262144, I/O @ 0x0000c880/8
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.1.0
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.0.0
	ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "psb"
(II) Loading /usr/lib/xorg/modules/drivers/psb_drv.so
(II) Module psb: vendor="X.Org Foundation"
	compiled for 1.7.1, module version = 0.29.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 6.0
(II) Debug: psbSetup

Re: Intel Poulsbo [psb] driver for Asus Eeepc 1101

[Peter Zijlstra]

On Thu, 2009-11-19 at 09:52 +0100, Zeno Davatz wrote:
> When is this driver expected to make it into the kernel?

When they open-source the driver.