From: Yinghai Lu <yinghai@kernel.org>
To: Jens Axboe <jens.axboe@oracle.com>
Cc: Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: Bisected regression (Was Re: current -git fails to boot on nehalem-ex)
Date: Thu, 10 Dec 2009 11:19:16 -0800 [thread overview]
Message-ID: <4B2149B4.9060900@kernel.org> (raw)
In-Reply-To: <20091210190742.GS8742@kernel.dk>
Jens Axboe wrote:
> On Thu, Dec 10 2009, Jens Axboe wrote:
>>>>> [ 0.000000] Kernel panic - not syncing: Overlapping early reservations 12-f011 MP-table mpc to 0-fff BIOS data page
>>>> mptable mpc is [12 - f011]
>>>>
>>>> what a BIOS !
>>>>
>>>> can you check if it works with 2.6.32 + "acpi=off"?
>> I'll try that.
>
> Yes, 2.6.32 boots fine with acpi=off passed.
>
>>> please check if this one could workaround it.
>>>
>>> diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
>>> index d17d482..f60acec 100644
>>> --- a/arch/x86/kernel/e820.c
>>> +++ b/arch/x86/kernel/e820.c
>>> @@ -732,7 +732,7 @@ struct early_res {
>>> char overlap_ok;
>>> };
>>> static struct early_res early_res[MAX_EARLY_RES] __initdata = {
>>> - { 0, PAGE_SIZE, "BIOS data page" }, /* BIOS data page */
>>> + { 0, PAGE_SIZE, "BIOS data page", 1 }, /* BIOS data page */
>>> {}
>>> };
>> And then this. Results in 10-15min.
>
> Doesn't work, it just complains about a different overlap:
>
> [ 0.000000] Kernel panic - not syncing: Overlapping early
> reservations 12-f011 MP-table mpc to 6000-7fff TRAMPOLINE
> [ 0.000000]
> [ 0.000000] Pid: 0, comm: swapper Not tainted 2.6.32 #51
> [ 0.000000] Call Trace:
> [ 0.000000] [<ffffffff813c709b>] panic+0xa0/0x16a
> [ 0.000000] [<ffffffff8167d280>] ?
> reserve_early_overlap_ok+0x2e/0x39
> [ 0.000000] [<ffffffff8167d24a>] ?
> drop_overlaps_that_are_ok+0x117/0x11f
> [ 0.000000] [<ffffffff8167d133>] drop_overlaps_that_are_ok+0x0/0x11f
> [ 0.000000] [<ffffffff8167d2c6>] reserve_early+0x3b/0x3d
> [ 0.000000] [<ffffffff81683248>] smp_scan_config+0xe7/0x10e
> [ 0.000000] [<ffffffff816832a9>] default_find_smp_config+0x3a/0x60
> [ 0.000000] [<ffffffff8167b0be>] setup_arch+0x6ae/0xa88
> [ 0.000000] [<ffffffff816789ff>] start_kernel+0x82/0x412
> [ 0.000000] [<ffffffff81678289>] x86_64_start_reservations+0x99/0xb9
> [ 0.000000] [<ffffffff81678389>] x86_64_start_kernel+0xe0/0xf2
>
>
that is funny. we may need to use find early for our TRAMPOLINE...?
otherwise your mptable is corrupted....
YH
next prev parent reply other threads:[~2009-12-10 19:20 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-10 9:10 current -git fails to boot on nehalem-ex Jens Axboe
2009-12-10 10:39 ` Bisected regression (Was Re: current -git fails to boot on nehalem-ex) Jens Axboe
2009-12-10 16:06 ` Ingo Molnar
2009-12-10 17:26 ` Yinghai
2009-12-10 18:07 ` Jens Axboe
2009-12-10 18:34 ` Yinghai Lu
2009-12-10 18:41 ` Bisected regression Roland Dreier
2009-12-10 18:44 ` Jens Axboe
2009-12-10 19:13 ` Yinghai Lu
2009-12-10 18:44 ` Yinghai Lu
2009-12-10 18:42 ` Bisected regression (Was Re: current -git fails to boot on nehalem-ex) Yinghai Lu
2009-12-10 18:45 ` Jens Axboe
2009-12-10 19:07 ` Jens Axboe
2009-12-10 19:19 ` Yinghai Lu [this message]
2009-12-10 19:26 ` Jens Axboe
2009-12-10 19:34 ` Bisected regression Roland Dreier
2009-12-10 21:07 ` Bisected regression (Was Re: current -git fails to boot on nehalem-ex) Yinghai Lu
2009-12-10 21:15 ` Jens Axboe
2009-12-10 22:39 ` H. Peter Anvin
2009-12-10 22:45 ` Yinghai Lu
2009-12-10 22:54 ` H. Peter Anvin
2009-12-10 22:47 ` Bisected regression Roland Dreier
2009-12-10 22:50 ` H. Peter Anvin
2009-12-11 8:19 ` Bisected regression (Was Re: current -git fails to boot on nehalem-ex) Jens Axboe
2009-12-11 8:32 ` Ingo Molnar
2009-12-11 8:55 ` [tip:x86/urgent] x86: Use find_e820() instead of hard coded trampoline address tip-bot for Yinghai Lu
2009-12-10 19:28 ` Bisected regression Roland Dreier
2009-12-10 19:33 ` Yinghai Lu
2009-12-10 19:36 ` Roland Dreier
2009-12-10 19:50 ` Yinghai Lu
2009-12-10 22:44 ` H. Peter Anvin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B2149B4.9060900@kernel.org \
--to=yinghai@kernel.org \
--cc=hpa@zytor.com \
--cc=jens.axboe@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox