public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>,
	Jesse Barnes <jbarnes@virtuousgeek.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	"H. Peter Anvin" <hpa@zytor.com>,
	Andrew Morton <akpm@linux-foundation.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
	Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too
Date: Fri, 11 Dec 2009 15:35:41 -0800	[thread overview]
Message-ID: <4B22D74D.4020201@kernel.org> (raw)
In-Reply-To: <4B22D4DA.2000104@kernel.org>


should be good for 32bit too.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/pci/Makefile   |    3 +--
 arch/x86/pci/amd_bus.c  |   17 +++--------------
 arch/x86/pci/bus_numa.h |    4 ++--
 arch/x86/pci/i386.c     |    4 ----
 4 files changed, 6 insertions(+), 22 deletions(-)

Index: linux-2.6/arch/x86/pci/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/pci/Makefile
+++ linux-2.6/arch/x86/pci/Makefile
@@ -14,8 +14,7 @@ obj-$(CONFIG_X86_VISWS)		+= visws.o
 obj-$(CONFIG_X86_NUMAQ)		+= numaq_32.o
 
 obj-y				+= common.o early.o
-obj-y				+= amd_bus.o
-obj-$(CONFIG_X86_64)		+= bus_numa.o intel_bus.o
+obj-y				+= amd_bus.o bus_numa.o intel_bus.o
 
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
Index: linux-2.6/arch/x86/pci/amd_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/amd_bus.c
+++ linux-2.6/arch/x86/pci/amd_bus.c
@@ -6,9 +6,7 @@
 
 #include <asm/pci_x86.h>
 
-#ifdef CONFIG_X86_64
 #include <asm/pci-direct.h>
-#endif
 
 #include "bus_numa.h"
 
@@ -17,8 +15,6 @@
  * also get peer root bus resource for io,mmio
  */
 
-#ifdef CONFIG_X86_64
-
 struct pci_hostbridge_probe {
 	u32 bus;
 	u32 slot;
@@ -207,7 +203,7 @@ static int __init early_fill_mp_bus_info
 	address = MSR_K8_TOP_MEM1;
 	rdmsrl(address, val);
 	end = (val & 0xffffff800000ULL);
-	printk(KERN_INFO "TOM: %016lx aka %ldM\n", end, end>>20);
+	printk(KERN_INFO "TOM: %016llx aka %lldM\n", (u64)end, (u64)end>>20);
 	if (end < (1ULL<<32))
 		subtract_range(range, RANGE_NUM, 0, end - 1);
 
@@ -301,7 +297,8 @@ static int __init early_fill_mp_bus_info
 		address = MSR_K8_TOP_MEM2;
 		rdmsrl(address, val);
 		end = (val & 0xffffff800000ULL);
-		printk(KERN_INFO "TOM2: %016lx aka %ldM\n", end, end>>20);
+		printk(KERN_INFO "TOM2: %016llx aka %lldM\n", (u64)end,
+							 (u64)end>>20);
 		subtract_range(range, RANGE_NUM, 1ULL<<32, end - 1);
 	}
 
@@ -347,14 +344,6 @@ static int __init early_fill_mp_bus_info
 	return 0;
 }
 
-#else  /* !CONFIG_X86_64 */
-
-static int __init early_fill_mp_bus_info(void) { return 0; }
-
-#endif /* !CONFIG_X86_64 */
-
-/* common 32/64 bit code */
-
 #define ENABLE_CF8_EXT_CFG      (1ULL << 46)
 
 static void enable_pci_io_ecs(void *unused)
Index: linux-2.6/arch/x86/pci/i386.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/i386.c
+++ linux-2.6/arch/x86/pci/i386.c
@@ -257,10 +257,6 @@ void __init pcibios_resource_survey(void
  */
 fs_initcall(pcibios_assign_resources);
 
-void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
-{
-}
-
 /*
  *  If we set up a device for bus mastering, we need to check the latency
  *  timer as certain crappy BIOSes forget to set it properly.
Index: linux-2.6/arch/x86/pci/bus_numa.h
===================================================================
--- linux-2.6.orig/arch/x86/pci/bus_numa.h
+++ linux-2.6/arch/x86/pci/bus_numa.h
@@ -1,5 +1,5 @@
-#ifdef CONFIG_X86_64
-
+#ifndef __BUS_NUMA_H
+#define __BUS_NUMA_H
 /*
  * sub bus (transparent) will use entres from 3 to store extra from
  * root, so need to make sure we have enough slot there, Should we



  parent reply	other threads:[~2009-12-11 23:41 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <4B22D4DA.2000104@kernel.org>
2009-12-11 23:35 ` [PATCH 2/7] x86/range: check range in update range Yinghai Lu
2009-12-11 23:35 ` [PATCH 3/7] x86/pci: use resource_size_t in update_res Yinghai Lu
2009-12-11 23:35 ` [PATCH 4/7] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2009-12-11 23:35 ` [PATCH 5/7] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2009-12-11 23:55   ` H. Peter Anvin
2009-12-12  0:42     ` Yinghai Lu
2009-12-12  2:10   ` [PATCH 5/7] x86/pci: use u64 instead of size_t in amd_bus.c -v2 Yinghai Lu
2009-12-11 23:35 ` Yinghai Lu [this message]
2009-12-12  2:11   ` [PATCH 61/7] x86/pci: add cap_4g Yinghai Lu
2009-12-12  2:16     ` H. Peter Anvin
2009-12-12  2:20       ` Yinghai Lu
2009-12-12  2:25         ` H. Peter Anvin
2009-12-12  3:29           ` [PATCH 61/7] x86/pci: add cap_resource -v2 Yinghai Lu
2009-12-12  2:13   ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v2 Yinghai Lu
2009-12-12  3:28     ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v3 Yinghai Lu
2009-12-11 23:35 ` [PATCH 7/7] x86: increase MAX_EARLY_RES Yinghai Lu
2009-12-15  2:06   ` [PATCH 1/3] x86: call early_res_to_bootmem one time Yinghai Lu
2009-12-15  2:07     ` [PATCH 2/3] x86: introduce max_early_res and early_res_count Yinghai Lu
2009-12-15  2:08       ` [PATCH 3/3] x86: dynamic increase early_res array size Yinghai Lu
2009-12-16  1:11         ` [PATCH 4/3] x86: make early_node_mem get mem > 4g if possible -v2 Yinghai Lu
2009-12-17  1:01   ` [tip:x86/urgent] x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA tip-bot for Yinghai Lu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4B22D74D.4020201@kernel.org \
    --to=yinghai@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=gwingerde@gmail.com \
    --cc=hpa@zytor.com \
    --cc=jbarnes@virtuousgeek.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mingo@elte.hu \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox