From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>,
Jesse Barnes <jbarnes@virtuousgeek.org>,
Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
Gertjan van Wingerde <gwingerde@gmail.com>
Subject: [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v3
Date: Fri, 11 Dec 2009 19:28:26 -0800 [thread overview]
Message-ID: <4B230DDA.5030006@kernel.org> (raw)
In-Reply-To: <4B22FC35.5090305@kernel.org>
should be good for 32bit too.
-v3: cast res->start
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/pci/Makefile | 3 +--
arch/x86/pci/amd_bus.c | 14 +-------------
arch/x86/pci/bus_numa.h | 4 ++--
arch/x86/pci/i386.c | 4 ----
arch/x86/pci/intel_bus.c | 2 +-
5 files changed, 5 insertions(+), 22 deletions(-)
Index: linux-2.6/arch/x86/pci/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/pci/Makefile
+++ linux-2.6/arch/x86/pci/Makefile
@@ -14,8 +14,7 @@ obj-$(CONFIG_X86_VISWS) += visws.o
obj-$(CONFIG_X86_NUMAQ) += numaq_32.o
obj-y += common.o early.o
-obj-y += amd_bus.o
-obj-$(CONFIG_X86_64) += bus_numa.o intel_bus.o
+obj-y += amd_bus.o bus_numa.o intel_bus.o
ifeq ($(CONFIG_PCI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
Index: linux-2.6/arch/x86/pci/amd_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/amd_bus.c
+++ linux-2.6/arch/x86/pci/amd_bus.c
@@ -6,9 +6,7 @@
#include <asm/pci_x86.h>
-#ifdef CONFIG_X86_64
#include <asm/pci-direct.h>
-#endif
#include "bus_numa.h"
@@ -17,8 +15,6 @@
* also get peer root bus resource for io,mmio
*/
-#ifdef CONFIG_X86_64
-
struct pci_hostbridge_probe {
u32 bus;
u32 slot;
@@ -342,21 +338,13 @@ static int __init early_fill_mp_bus_info
printk(KERN_DEBUG "bus: %02x index %x %s: [%llx, %llx]\n",
busnum, j,
(res->flags & IORESOURCE_IO)?"io port":"mmio",
- res->start, res->end);
+ (u64)res->start, (u64)res->end);
}
}
return 0;
}
-#else /* !CONFIG_X86_64 */
-
-static int __init early_fill_mp_bus_info(void) { return 0; }
-
-#endif /* !CONFIG_X86_64 */
-
-/* common 32/64 bit code */
-
#define ENABLE_CF8_EXT_CFG (1ULL << 46)
static void enable_pci_io_ecs(void *unused)
Index: linux-2.6/arch/x86/pci/i386.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/i386.c
+++ linux-2.6/arch/x86/pci/i386.c
@@ -257,10 +257,6 @@ void __init pcibios_resource_survey(void
*/
fs_initcall(pcibios_assign_resources);
-void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
-{
-}
-
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
Index: linux-2.6/arch/x86/pci/bus_numa.h
===================================================================
--- linux-2.6.orig/arch/x86/pci/bus_numa.h
+++ linux-2.6/arch/x86/pci/bus_numa.h
@@ -1,5 +1,5 @@
-#ifdef CONFIG_X86_64
-
+#ifndef __BUS_NUMA_H
+#define __BUS_NUMA_H
/*
* sub bus (transparent) will use entres from 3 to store extra from
* root, so need to make sure we have enough slot there, Should we
Index: linux-2.6/arch/x86/pci/intel_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/intel_bus.c
+++ linux-2.6/arch/x86/pci/intel_bus.c
@@ -30,7 +30,7 @@ static inline void print_ioh_resources(s
busnum, i,
(res->flags & IORESOURCE_IO) ? "io port" :
"mmio",
- res->start, res->end);
+ (u64)res->start, (u64)res->end);
}
}
next prev parent reply other threads:[~2009-12-12 3:29 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4B22D4DA.2000104@kernel.org>
2009-12-11 23:35 ` [PATCH 2/7] x86/range: check range in update range Yinghai Lu
2009-12-11 23:35 ` [PATCH 3/7] x86/pci: use resource_size_t in update_res Yinghai Lu
2009-12-11 23:35 ` [PATCH 4/7] x86/pci: amd one chain system to use pci read out res Yinghai Lu
2009-12-11 23:35 ` [PATCH 5/7] x86/pci: use u64 instead of size_t in amd_bus.c Yinghai Lu
2009-12-11 23:55 ` H. Peter Anvin
2009-12-12 0:42 ` Yinghai Lu
2009-12-12 2:10 ` [PATCH 5/7] x86/pci: use u64 instead of size_t in amd_bus.c -v2 Yinghai Lu
2009-12-11 23:35 ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too Yinghai Lu
2009-12-12 2:11 ` [PATCH 61/7] x86/pci: add cap_4g Yinghai Lu
2009-12-12 2:16 ` H. Peter Anvin
2009-12-12 2:20 ` Yinghai Lu
2009-12-12 2:25 ` H. Peter Anvin
2009-12-12 3:29 ` [PATCH 61/7] x86/pci: add cap_resource -v2 Yinghai Lu
2009-12-12 2:13 ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v2 Yinghai Lu
2009-12-12 3:28 ` Yinghai Lu [this message]
2009-12-11 23:35 ` [PATCH 7/7] x86: increase MAX_EARLY_RES Yinghai Lu
2009-12-15 2:06 ` [PATCH 1/3] x86: call early_res_to_bootmem one time Yinghai Lu
2009-12-15 2:07 ` [PATCH 2/3] x86: introduce max_early_res and early_res_count Yinghai Lu
2009-12-15 2:08 ` [PATCH 3/3] x86: dynamic increase early_res array size Yinghai Lu
2009-12-16 1:11 ` [PATCH 4/3] x86: make early_node_mem get mem > 4g if possible -v2 Yinghai Lu
2009-12-17 1:01 ` [tip:x86/urgent] x86: Increase MAX_EARLY_RES; insufficient on 32-bit NUMA tip-bot for Yinghai Lu
[not found] <4B2BE063.4040704@kernel.org>
2009-12-18 20:09 ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v3 Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B230DDA.5030006@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=gwingerde@gmail.com \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox