* [PATCH] x86: fix checking of SRAT when node0 ram is not from 0
@ 2009-12-13 7:01 Yinghai Lu
2009-12-13 23:33 ` [PATCH] x86: fix checking of SRAT when node0 ram is not from 0 -v2 Yinghai Lu
0 siblings, 1 reply; 3+ messages in thread
From: Yinghai Lu @ 2009-12-13 7:01 UTC (permalink / raw)
To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton,
Mel Gorman, Suresh Siddha
Cc: linux-kernel@vger.kernel.org
Found one system that boot from socket1 instead of socket0, SRAT get rejected...
[ 0.000000] SRAT: Node 1 PXM 0 0-a0000
[ 0.000000] SRAT: Node 1 PXM 0 100000-80000000
[ 0.000000] SRAT: Node 1 PXM 0 100000000-2080000000
[ 0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000
[ 0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000
[ 0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000
[ 0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000
[ 0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000
[ 0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000
[ 0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000
...
[ 0.000000] NUMA: Allocated memnodemap from 500000 - 701040
[ 0.000000] NUMA: Using 20 for the hash shift.
[ 0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used
[ 0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used
[ 0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used
[ 0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used
[ 0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used
[ 0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used
[ 0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used
[ 0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used
[ 0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used
[ 0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used
[ 0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used.
[ 0.000000] SRAT: SRAT not used.
the early_node_map is not sorted because node0 with non zero start come first.
so try to sort it right away after all regions are registered.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/mm/srat_32.c | 2 ++
arch/x86/mm/srat_64.c | 2 ++
include/linux/mm.h | 1 +
mm/page_alloc.c | 2 +-
4 files changed, 6 insertions(+), 1 deletion(-)
Index: linux-2.6/arch/x86/mm/srat_32.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/srat_32.c
+++ linux-2.6/arch/x86/mm/srat_32.c
@@ -267,6 +267,8 @@ int __init get_memcfg_from_srat(void)
e820_register_active_regions(chunk->nid, chunk->start_pfn,
min(chunk->end_pfn, max_pfn));
}
+ /* for out of order entries in SRAT */
+ sort_node_map();
for_each_online_node(nid) {
unsigned long start = node_start_pfn[nid];
Index: linux-2.6/arch/x86/mm/srat_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/srat_64.c
+++ linux-2.6/arch/x86/mm/srat_64.c
@@ -373,6 +373,8 @@ int __init acpi_scan_nodes(unsigned long
for_each_node_mask(i, nodes_parsed)
e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT,
nodes[i].end >> PAGE_SHIFT);
+ /* for out of order entries in SRAT */
+ sort_node_map();
if (!nodes_cover_memory(nodes)) {
bad_srat();
return -1;
Index: linux-2.6/include/linux/mm.h
===================================================================
--- linux-2.6.orig/include/linux/mm.h
+++ linux-2.6/include/linux/mm.h
@@ -1022,6 +1022,7 @@ extern void add_active_range(unsigned in
extern void remove_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn);
extern void remove_all_active_ranges(void);
+void sort_node_map(void);
extern unsigned long absent_pages_in_range(unsigned long start_pfn,
unsigned long end_pfn);
extern void get_pfn_range_for_nid(unsigned int nid,
Index: linux-2.6/mm/page_alloc.c
===================================================================
--- linux-2.6.orig/mm/page_alloc.c
+++ linux-2.6/mm/page_alloc.c
@@ -4102,7 +4102,7 @@ static int __init cmp_node_active_region
}
/* sort the node_map by start_pfn */
-static void __init sort_node_map(void)
+void __init sort_node_map(void)
{
sort(early_node_map, (size_t)nr_nodemap_entries,
sizeof(struct node_active_region),
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH] x86: fix checking of SRAT when node0 ram is not from 0 -v2 2009-12-13 7:01 [PATCH] x86: fix checking of SRAT when node0 ram is not from 0 Yinghai Lu @ 2009-12-13 23:33 ` Yinghai Lu 2009-12-17 1:01 ` [tip:x86/urgent] x86: Fix checking of SRAT when node 0 ram is not from 0 tip-bot for Yinghai Lu 0 siblings, 1 reply; 3+ messages in thread From: Yinghai Lu @ 2009-12-13 23:33 UTC (permalink / raw) To: Ingo Molnar, Thomas Gleixner, H. Peter Anvin, Andrew Morton, Mel Gorman, Suresh Siddha Cc: linux-kernel@vger.kernel.org Found one system that boot from socket1 instead of socket0, SRAT get rejected... [ 0.000000] SRAT: Node 1 PXM 0 0-a0000 [ 0.000000] SRAT: Node 1 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 0 100000000-2080000000 [ 0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000 [ 0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000 [ 0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000 [ 0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000 [ 0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000 [ 0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000 [ 0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000 ... [ 0.000000] NUMA: Allocated memnodemap from 500000 - 701040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used [ 0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used [ 0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used [ 0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used [ 0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used [ 0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used [ 0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used [ 0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used [ 0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used [ 0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used [ 0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. the early_node_map is not sorted because node0 with non zero start come first. so try to sort it right away after all regions are registered. -v2: make it more solid to handle cross node case like node0 [0,4g), [8,12g) and node1 [4g, 8g), [12g, 16g) Signed-off-by: Yinghai Lu <yinghai@kernel.org> --- arch/x86/mm/srat_32.c | 2 ++ arch/x86/mm/srat_64.c | 4 +++- include/linux/mm.h | 3 +++ mm/page_alloc.c | 4 ++-- 4 files changed, 10 insertions(+), 3 deletions(-) Index: linux-2.6/arch/x86/mm/srat_32.c =================================================================== --- linux-2.6.orig/arch/x86/mm/srat_32.c +++ linux-2.6/arch/x86/mm/srat_32.c @@ -267,6 +267,8 @@ int __init get_memcfg_from_srat(void) e820_register_active_regions(chunk->nid, chunk->start_pfn, min(chunk->end_pfn, max_pfn)); } + /* for out of order entries in SRAT */ + sort_node_map(); for_each_online_node(nid) { unsigned long start = node_start_pfn[nid]; Index: linux-2.6/arch/x86/mm/srat_64.c =================================================================== --- linux-2.6.orig/arch/x86/mm/srat_64.c +++ linux-2.6/arch/x86/mm/srat_64.c @@ -317,7 +317,7 @@ static int __init nodes_cover_memory(con unsigned long s = nodes[i].start >> PAGE_SHIFT; unsigned long e = nodes[i].end >> PAGE_SHIFT; pxmram += e - s; - pxmram -= absent_pages_in_range(s, e); + pxmram -= __absent_pages_in_range(i, s, e); if ((long)pxmram < 0) pxmram = 0; } @@ -373,6 +373,8 @@ int __init acpi_scan_nodes(unsigned long for_each_node_mask(i, nodes_parsed) e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); + /* for out of order entries in SRAT */ + sort_node_map(); if (!nodes_cover_memory(nodes)) { bad_srat(); return -1; Index: linux-2.6/include/linux/mm.h =================================================================== --- linux-2.6.orig/include/linux/mm.h +++ linux-2.6/include/linux/mm.h @@ -1022,6 +1022,9 @@ extern void add_active_range(unsigned in extern void remove_active_range(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); extern void remove_all_active_ranges(void); +void sort_node_map(void); +unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn, + unsigned long end_pfn); extern unsigned long absent_pages_in_range(unsigned long start_pfn, unsigned long end_pfn); extern void get_pfn_range_for_nid(unsigned int nid, Index: linux-2.6/mm/page_alloc.c =================================================================== --- linux-2.6.orig/mm/page_alloc.c +++ linux-2.6/mm/page_alloc.c @@ -3573,7 +3573,7 @@ static unsigned long __meminit zone_span * Return the number of holes in a range on a node. If nid is MAX_NUMNODES, * then all holes in the requested range will be accounted for. */ -static unsigned long __meminit __absent_pages_in_range(int nid, +unsigned long __meminit __absent_pages_in_range(int nid, unsigned long range_start_pfn, unsigned long range_end_pfn) { @@ -4102,7 +4102,7 @@ static int __init cmp_node_active_region } /* sort the node_map by start_pfn */ -static void __init sort_node_map(void) +void __init sort_node_map(void) { sort(early_node_map, (size_t)nr_nodemap_entries, sizeof(struct node_active_region), ^ permalink raw reply [flat|nested] 3+ messages in thread
* [tip:x86/urgent] x86: Fix checking of SRAT when node 0 ram is not from 0 2009-12-13 23:33 ` [PATCH] x86: fix checking of SRAT when node0 ram is not from 0 -v2 Yinghai Lu @ 2009-12-17 1:01 ` tip-bot for Yinghai Lu 0 siblings, 0 replies; 3+ messages in thread From: tip-bot for Yinghai Lu @ 2009-12-17 1:01 UTC (permalink / raw) To: linux-tip-commits; +Cc: linux-kernel, hpa, mingo, yinghai, tglx, jens.axboe Commit-ID: 329962503692b42d8088f31584e42d52db179d52 Gitweb: http://git.kernel.org/tip/329962503692b42d8088f31584e42d52db179d52 Author: Yinghai Lu <yinghai@kernel.org> AuthorDate: Tue, 15 Dec 2009 17:59:02 -0800 Committer: H. Peter Anvin <hpa@zytor.com> CommitDate: Wed, 16 Dec 2009 16:43:37 -0800 x86: Fix checking of SRAT when node 0 ram is not from 0 Found one system that boot from socket1 instead of socket0, SRAT get rejected... [ 0.000000] SRAT: Node 1 PXM 0 0-a0000 [ 0.000000] SRAT: Node 1 PXM 0 100000-80000000 [ 0.000000] SRAT: Node 1 PXM 0 100000000-2080000000 [ 0.000000] SRAT: Node 0 PXM 1 2080000000-4080000000 [ 0.000000] SRAT: Node 2 PXM 2 4080000000-6080000000 [ 0.000000] SRAT: Node 3 PXM 3 6080000000-8080000000 [ 0.000000] SRAT: Node 4 PXM 4 8080000000-a080000000 [ 0.000000] SRAT: Node 5 PXM 5 a080000000-c080000000 [ 0.000000] SRAT: Node 6 PXM 6 c080000000-e080000000 [ 0.000000] SRAT: Node 7 PXM 7 e080000000-10080000000 ... [ 0.000000] NUMA: Allocated memnodemap from 500000 - 701040 [ 0.000000] NUMA: Using 20 for the hash shift. [ 0.000000] Adding active range (0, 0x2080000, 0x4080000) 0 entries of 3200 used [ 0.000000] Adding active range (1, 0x0, 0x96) 1 entries of 3200 used [ 0.000000] Adding active range (1, 0x100, 0x7f750) 2 entries of 3200 used [ 0.000000] Adding active range (1, 0x100000, 0x2080000) 3 entries of 3200 used [ 0.000000] Adding active range (2, 0x4080000, 0x6080000) 4 entries of 3200 used [ 0.000000] Adding active range (3, 0x6080000, 0x8080000) 5 entries of 3200 used [ 0.000000] Adding active range (4, 0x8080000, 0xa080000) 6 entries of 3200 used [ 0.000000] Adding active range (5, 0xa080000, 0xc080000) 7 entries of 3200 used [ 0.000000] Adding active range (6, 0xc080000, 0xe080000) 8 entries of 3200 used [ 0.000000] Adding active range (7, 0xe080000, 0x10080000) 9 entries of 3200 used [ 0.000000] SRAT: PXMs only cover 917504MB of your 1048566MB e820 RAM. Not used. [ 0.000000] SRAT: SRAT not used. the early_node_map is not sorted because node0 with non zero start come first. so try to sort it right away after all regions are registered. also fixs refression by 8716273c (x86: Export srat physical topology) -v2: make it more solid to handle cross node case like node0 [0,4g), [8,12g) and node1 [4g, 8g), [12g, 16g) -v3: update comments. Reported-and-tested-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B2579D2.3010201@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> --- arch/x86/mm/srat_32.c | 2 ++ arch/x86/mm/srat_64.c | 4 +++- include/linux/mm.h | 3 +++ mm/page_alloc.c | 4 ++-- 4 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 6f8aa33..9324f13 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -267,6 +267,8 @@ int __init get_memcfg_from_srat(void) e820_register_active_regions(chunk->nid, chunk->start_pfn, min(chunk->end_pfn, max_pfn)); } + /* for out of order entries in SRAT */ + sort_node_map(); for_each_online_node(nid) { unsigned long start = node_start_pfn[nid]; diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index d890754..a271241 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -317,7 +317,7 @@ static int __init nodes_cover_memory(const struct bootnode *nodes) unsigned long s = nodes[i].start >> PAGE_SHIFT; unsigned long e = nodes[i].end >> PAGE_SHIFT; pxmram += e - s; - pxmram -= absent_pages_in_range(s, e); + pxmram -= __absent_pages_in_range(i, s, e); if ((long)pxmram < 0) pxmram = 0; } @@ -373,6 +373,8 @@ int __init acpi_scan_nodes(unsigned long start, unsigned long end) for_each_node_mask(i, nodes_parsed) e820_register_active_regions(i, nodes[i].start >> PAGE_SHIFT, nodes[i].end >> PAGE_SHIFT); + /* for out of order entries in SRAT */ + sort_node_map(); if (!nodes_cover_memory(nodes)) { bad_srat(); return -1; diff --git a/include/linux/mm.h b/include/linux/mm.h index 24c3956..20a2036 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -1022,6 +1022,9 @@ extern void add_active_range(unsigned int nid, unsigned long start_pfn, extern void remove_active_range(unsigned int nid, unsigned long start_pfn, unsigned long end_pfn); extern void remove_all_active_ranges(void); +void sort_node_map(void); +unsigned long __absent_pages_in_range(int nid, unsigned long start_pfn, + unsigned long end_pfn); extern unsigned long absent_pages_in_range(unsigned long start_pfn, unsigned long end_pfn); extern void get_pfn_range_for_nid(unsigned int nid, diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 2bc2ac6..873c863 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3573,7 +3573,7 @@ static unsigned long __meminit zone_spanned_pages_in_node(int nid, * Return the number of holes in a range on a node. If nid is MAX_NUMNODES, * then all holes in the requested range will be accounted for. */ -static unsigned long __meminit __absent_pages_in_range(int nid, +unsigned long __meminit __absent_pages_in_range(int nid, unsigned long range_start_pfn, unsigned long range_end_pfn) { @@ -4102,7 +4102,7 @@ static int __init cmp_node_active_region(const void *a, const void *b) } /* sort the node_map by start_pfn */ -static void __init sort_node_map(void) +void __init sort_node_map(void) { sort(early_node_map, (size_t)nr_nodemap_entries, sizeof(struct node_active_region), ^ permalink raw reply related [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-12-17 1:02 UTC | newest] Thread overview: 3+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-12-13 7:01 [PATCH] x86: fix checking of SRAT when node0 ram is not from 0 Yinghai Lu 2009-12-13 23:33 ` [PATCH] x86: fix checking of SRAT when node0 ram is not from 0 -v2 Yinghai Lu 2009-12-17 1:01 ` [tip:x86/urgent] x86: Fix checking of SRAT when node 0 ram is not from 0 tip-bot for Yinghai Lu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox