From: Yinghai Lu <yinghai@kernel.org>
To: Ingo Molnar <mingo@elte.hu>, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
Andrew Morton <akpm@linux-foundation.org>,
Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: [PATCH 7/9] x86: make early_node_mem get mem > 4g if possible -v2
Date: Fri, 18 Dec 2009 01:48:16 -0800 [thread overview]
Message-ID: <4B2B4FE0.9080009@kernel.org> (raw)
In-Reply-To: <4B2B4C19.6010402@kernel.org>
so we could put pgdata for the node high, and later sparse
vmmap will get the section nr that need.
with this patch will make <4g ram will not use sparse vmmap
before this patch, will get, before swiotlb try get bootmem
[ 0.000000] nid=1 start=0 end=2080000 aligned=1
[ 0.000000] free [10 - 96]
[ 0.000000] free [b12 - 1000]
[ 0.000000] free [359f - 38a3]
[ 0.000000] free [38b5 - 3a00]
[ 0.000000] free [41e01 - 42000]
[ 0.000000] free [73dde - 73e00]
[ 0.000000] free [73fdd - 74000]
[ 0.000000] free [741dd - 74200]
[ 0.000000] free [743dd - 74400]
[ 0.000000] free [745dd - 74600]
[ 0.000000] free [747dd - 74800]
[ 0.000000] free [749dd - 74a00]
[ 0.000000] free [74bdd - 74c00]
[ 0.000000] free [74ddd - 74e00]
[ 0.000000] free [74fdd - 75000]
[ 0.000000] free [751dd - 75200]
[ 0.000000] free [753dd - 75400]
[ 0.000000] free [755dd - 75600]
[ 0.000000] free [757dd - 75800]
[ 0.000000] free [759dd - 75a00]
[ 0.000000] free [75bdd - 7bf5f]
[ 0.000000] free [7f730 - 7f750]
[ 0.000000] free [100000 - 2080000]
[ 0.000000] total free 1f87170
[ 93.301474] Placing 64MB software IO TLB between ffff880075bdd000 - ffff880079bdd000
[ 93.311814] software IO TLB at phys 0x75bdd000 - 0x79bdd000
with this patch will get: before swiotlb try get bootmem
[ 0.000000] nid=1 start=0 end=2080000 aligned=1
[ 0.000000] free [a - 96]
[ 0.000000] free [702 - 1000]
[ 0.000000] free [359f - 3600]
[ 0.000000] free [37de - 3800]
[ 0.000000] free [39dd - 3a00]
[ 0.000000] free [3bdd - 3c00]
[ 0.000000] free [3ddd - 3e00]
[ 0.000000] free [3fdd - 4000]
[ 0.000000] free [41dd - 4200]
[ 0.000000] free [43dd - 4400]
[ 0.000000] free [45dd - 4600]
[ 0.000000] free [47dd - 4800]
[ 0.000000] free [49dd - 4a00]
[ 0.000000] free [4bdd - 4c00]
[ 0.000000] free [4ddd - 4e00]
[ 0.000000] free [4fdd - 5000]
[ 0.000000] free [51dd - 5200]
[ 0.000000] free [53dd - 5400]
[ 0.000000] free [55dd - 7bf5f]
[ 0.000000] free [7f730 - 7f750]
[ 0.000000] free [100428 - 100600]
[ 0.000000] free [13ea01 - 13ec00]
[ 0.000000] free [170800 - 2080000]
[ 0.000000] total free 1f87170
[ 92.689485] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 92.699799] Placing 64MB software IO TLB between ffff8800055dd000 - ffff8800095dd000
[ 92.710916] software IO TLB at phys 0x55dd000 - 0x95dd000
so will get enough space below 4G, aka pfn 0x100000
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/mm/numa_64.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)
Index: linux-2.6/arch/x86/mm/numa_64.c
===================================================================
--- linux-2.6.orig/arch/x86/mm/numa_64.c
+++ linux-2.6/arch/x86/mm/numa_64.c
@@ -163,14 +163,27 @@ static void * __init early_node_mem(int
unsigned long end, unsigned long size,
unsigned long align)
{
- unsigned long mem = find_e820_area(start, end, size, align);
+ unsigned long mem;
+ /*
+ * put it on high as possible
+ * something will go with NODE_DATA
+ */
+ if (start < (MAX_DMA_PFN<<PAGE_SHIFT))
+ start = MAX_DMA_PFN<<PAGE_SHIFT;
+ if (start < (MAX_DMA32_PFN<<PAGE_SHIFT) &&
+ end > (MAX_DMA32_PFN<<PAGE_SHIFT))
+ start = MAX_DMA32_PFN<<PAGE_SHIFT;
+ mem = find_e820_area(start, end, size, align);
if (mem != -1L)
return __va(mem);
-
- start = __pa(MAX_DMA_ADDRESS);
- end = max_low_pfn_mapped << PAGE_SHIFT;
+ /* extend the search scope */
+ end = max_pfn_mapped << PAGE_SHIFT;
+ if (end > (MAX_DMA32_PFN<<PAGE_SHIFT))
+ start = MAX_DMA32_PFN<<PAGE_SHIFT;
+ else
+ start = MAX_DMA_PFN<<PAGE_SHIFT;
mem = find_e820_area(start, end, size, align);
if (mem != -1L)
return __va(mem);
next prev parent reply other threads:[~2009-12-18 9:50 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4B2B4C19.6010402@kernel.org>
2009-12-18 9:46 ` [PATCH 1/9] x86: move range related operation to one file Yinghai Lu
2009-12-18 20:10 ` H. Peter Anvin
2009-12-18 20:17 ` Yinghai Lu
2009-12-18 21:26 ` H. Peter Anvin
2009-12-18 23:47 ` Yinghai Lu
2009-12-19 0:25 ` H. Peter Anvin
2009-12-19 0:27 ` Yinghai Lu
2009-12-19 0:34 ` H. Peter Anvin
2009-12-18 9:46 ` [PATCH 2/9] x86: check range in update range Yinghai Lu
2009-12-18 17:23 ` Jesse Barnes
2009-12-18 19:39 ` Yinghai Lu
2009-12-18 9:47 ` [PATCH 3/9] x86: call early_res_to_bootmem one time Yinghai Lu
2009-12-18 9:47 ` [PATCH 4/9] x86: introduce max_early_res and early_res_count Yinghai Lu
2009-12-18 9:47 ` [PATCH 5/9] x86: dynamic increase early_res array size -v2 Yinghai Lu
2009-12-18 9:47 ` [PATCH 6/9] x86: print bootmem free before pci_iommu_alloc and free_all_bootmem -v2 Yinghai Lu
2009-12-18 9:48 ` Yinghai Lu [this message]
2009-12-18 9:48 ` [PATCH 8/9] x86: only call dma32_reserve_bootmem 64bit !CONFIG_NUMA Yinghai Lu
2009-12-18 9:48 ` [PATCH 9/9] x86: make 64 bit use early_res instead of bootmem before slab Yinghai Lu
2009-12-20 9:18 ` [PATCH 1/2] sparsemem: put usemap for one node together Yinghai Lu
2009-12-20 9:20 ` [PATCH 2/2] sparsemem: put mem map " Yinghai Lu
2009-12-28 8:35 ` Ingo Molnar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B2B4FE0.9080009@kernel.org \
--to=yinghai@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox