From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>,
Ingo Molnar <mingo@elte.hu>, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>
Subject: [PATCH 3/7] x86/pci: amd one chain system to use pci read out res
Date: Fri, 18 Dec 2009 12:09:41 -0800 [thread overview]
Message-ID: <4B2BE185.9060505@kernel.org> (raw)
In-Reply-To: <4B2BE063.4040704@kernel.org>
found MSI amd k8 based laptops is hiding [0x70000000, 0x80000000) RAM from
e820.
enable amd one chain even for all.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/pci/amd_bus.c | 7 ++++---
arch/x86/pci/bus_numa.c | 5 -----
arch/x86/pci/bus_numa.h | 1 -
3 files changed, 4 insertions(+), 9 deletions(-)
Index: linux-2.6/arch/x86/pci/amd_bus.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/amd_bus.c
+++ linux-2.6/arch/x86/pci/amd_bus.c
@@ -87,11 +87,12 @@ static int __init early_fill_mp_bus_info
struct range range[RANGE_NUM];
u64 val;
u32 address;
+ int found;
if (!early_pci_allowed())
return -1;
- found_all_numa_early = 0;
+ found = 0;
for (i = 0; i < ARRAY_SIZE(pci_probes); i++) {
u32 id;
u16 device;
@@ -105,12 +106,12 @@ static int __init early_fill_mp_bus_info
device = (id>>16) & 0xffff;
if (pci_probes[i].vendor == vendor &&
pci_probes[i].device == device) {
- found_all_numa_early = 1;
+ found = 1;
break;
}
}
- if (!found_all_numa_early)
+ if (!found)
return 0;
pci_root_num = 0;
Index: linux-2.6/arch/x86/pci/bus_numa.c
===================================================================
--- linux-2.6.orig/arch/x86/pci/bus_numa.c
+++ linux-2.6/arch/x86/pci/bus_numa.c
@@ -5,7 +5,6 @@
int pci_root_num;
struct pci_root_info pci_root_info[PCI_ROOT_NR];
-int found_all_numa_early;
void x86_pci_root_bus_res_quirks(struct pci_bus *b)
{
@@ -21,10 +20,6 @@ void x86_pci_root_bus_res_quirks(struct
if (!pci_root_num)
return;
- /* for amd, if only one root bus, don't need to do anything */
- if (pci_root_num < 2 && found_all_numa_early)
- return;
-
for (i = 0; i < pci_root_num; i++) {
if (pci_root_info[i].bus_min == b->number)
break;
Index: linux-2.6/arch/x86/pci/bus_numa.h
===================================================================
--- linux-2.6.orig/arch/x86/pci/bus_numa.h
+++ linux-2.6/arch/x86/pci/bus_numa.h
@@ -20,7 +20,6 @@ struct pci_root_info {
#define PCI_ROOT_NR 4
extern int pci_root_num;
extern struct pci_root_info pci_root_info[PCI_ROOT_NR];
-extern int found_all_numa_early;
extern void update_res(struct pci_root_info *info, resource_size_t start,
resource_size_t end, unsigned long flags, int merge);
next prev parent reply other threads:[~2009-12-18 20:12 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4B2BE063.4040704@kernel.org>
2009-12-18 20:09 ` [PATCH 1/7] x86/pci: intel ioh bus num reg accessing fix Yinghai Lu
2009-12-18 20:09 ` [PATCH 2/7] x86/pci: use resource_size_t in update_res -v2 Yinghai Lu
2010-01-15 19:49 ` Jesse Barnes
2010-01-15 21:20 ` Yinghai Lu
2010-01-15 21:39 ` Jesse Barnes
2010-01-22 1:55 ` Yinghai Lu
2010-01-25 18:49 ` Jesse Barnes
2009-12-18 20:09 ` Yinghai Lu [this message]
2009-12-18 20:09 ` [PATCH 4/7] x86/pci: use u64 instead of size_t in amd_bus.c -v2 Yinghai Lu
2010-01-15 19:49 ` Jesse Barnes
2010-01-15 21:18 ` Yinghai Lu
2009-12-18 20:09 ` [PATCH 5/7] x86/pci: add cap_resource -v2 Yinghai Lu
2009-12-18 20:09 ` [PATCH 6/7] x86/pci: enable pci root res read out for 32bit too -v3 Yinghai Lu
2009-12-18 20:09 ` [PATCH 7/7] x86/pci: don't check mmconf again if it is from MSR with amd faml0h Yinghai Lu
2010-01-15 19:42 ` Jesse Barnes
2010-01-15 21:16 ` Yinghai Lu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B2BE185.9060505@kernel.org \
--to=yinghai@kernel.org \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox