[PATCH 0/5] clean up logical flat apic mode using

[PATCH 0/5] clean up logical flat apic mode using

[Yinghai Lu]

1. instroduce nr_cpus=x, to enumlate that only one x cpus are installed
2. nur nr_cpu_ids for checking
3. make default_setup_irq_routing of 32but more like 64 bit
4. amd cpu useing logical flat even one of 8 scpu apicid >= 8
5. use dmi table to decide if we need to disabled cpus as hotplug cpus.

need to apply after putting Suresh patch back.

todo:
1. seperate probe_32.c to probe_32.c and apic_default_32.c
2. merge probe_32.c and probe_64.c or create probe.c to share dmi table

Thanks

Yinghai Lu

[PATCH -v2 1/5] use nr_cpus= to set nr_cpu_ids early

[Yinghai Lu]

on x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka CONFIG_NR_CPUS

add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on
normal config.

-v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of
     NR_CPUS.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>

---
 arch/ia64/kernel/acpi.c   |    4 ++--
 arch/x86/kernel/smpboot.c |    7 ++++---
 drivers/acpi/numa.c       |    4 ++--
 init/main.c               |   14 ++++++++++++++
 4 files changed, 22 insertions(+), 7 deletions(-)

Index: linux-2.6/init/main.c
===================================================================
--- linux-2.6.orig/init/main.c
+++ linux-2.6/init/main.c
@@ -149,6 +149,20 @@ static int __init nosmp(char *str)
 
 early_param("nosmp", nosmp);
 
+/* this is hard limit */
+static int __init nrcpus(char *str)
+{
+	int nr_cpus;
+
+	get_option(&str, &nr_cpus);
+	if (nr_cpus > 0 && nr_cpus < nr_cpu_ids)
+		nr_cpu_ids = nr_cpus;
+
+	return 0;
+}
+
+early_param("nr_cpus", nrcpus);
+
 static int __init maxcpus(char *str)
 {
 	get_option(&str, &setup_max_cpus);
Index: linux-2.6/arch/ia64/kernel/acpi.c
===================================================================
--- linux-2.6.orig/arch/ia64/kernel/acpi.c
+++ linux-2.6/arch/ia64/kernel/acpi.c
@@ -883,8 +883,8 @@ __init void prefill_possible_map(void)
 
 	possible = available_cpus + additional_cpus;
 
-	if (possible > NR_CPUS)
-		possible = NR_CPUS;
+	if (possible > nr_cpu_ids)
+		possible = nr_cpu_ids;
 
 	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
 		possible, max((possible - available_cpus), 0));
Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -1213,11 +1213,12 @@ __init void prefill_possible_map(void)
 
 	total_cpus = max_t(int, possible, num_processors + disabled_cpus);
 
-	if (possible > CONFIG_NR_CPUS) {
+	/* nr_cpu_ids could be reduced via nr_cpus= */
+	if (possible > nr_cpu_ids) {
 		printk(KERN_WARNING
 			"%d Processors exceeds NR_CPUS limit of %d\n",
-			possible, CONFIG_NR_CPUS);
-		possible = CONFIG_NR_CPUS;
+			possible, nr_cpu_ids);
+		possible = nr_cpu_ids;
 	}
 
 	printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n",
Index: linux-2.6/drivers/acpi/numa.c
===================================================================
--- linux-2.6.orig/drivers/acpi/numa.c
+++ linux-2.6/drivers/acpi/numa.c
@@ -291,9 +291,9 @@ int __init acpi_numa_init(void)
 	/* SRAT: Static Resource Affinity Table */
 	if (!acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat)) {
 		acpi_table_parse_srat(ACPI_SRAT_TYPE_X2APIC_CPU_AFFINITY,
-				      acpi_parse_x2apic_affinity, NR_CPUS);
+				     acpi_parse_x2apic_affinity, nr_cpu_ids);
 		acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
-				      acpi_parse_processor_affinity, NR_CPUS);
+				     acpi_parse_processor_affinity, nr_cpu_ids);
 		ret = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY,
 					    acpi_parse_memory_affinity,
 					    NR_NODE_MEMBLKS);

[PATCH 2/5] x86: using logical flat for amd cpu too.

[Yinghai Lu]

not sure it works again, could be bios fix the irq routing dest ?

tested that amd support logical flat too when cpus num <= 8 and even
bsp apic id > 8

so could remove vendor check...

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/kernel/apic/apic.c     |   11 ++---------
 arch/x86/kernel/apic/probe_64.c |   13 ++-----------
 2 files changed, 4 insertions(+), 20 deletions(-)

Index: linux-2.6/arch/x86/kernel/apic/apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/apic.c
+++ linux-2.6/arch/x86/kernel/apic/apic.c
@@ -1898,15 +1898,8 @@ void __cpuinit generic_processor_info(in
 		max_physical_apicid = apicid;
 
 #ifdef CONFIG_X86_32
-	switch (boot_cpu_data.x86_vendor) {
-	case X86_VENDOR_INTEL:
-		if (num_processors > 8)
-			def_to_bigsmp = 1;
-		break;
-	case X86_VENDOR_AMD:
-		if (max_physical_apicid >= 8)
-			def_to_bigsmp = 1;
-	}
+	if (num_processors > 8)
+		def_to_bigsmp = 1;
 #endif
 
 #if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
Index: linux-2.6/arch/x86/kernel/apic/probe_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/probe_64.c
+++ linux-2.6/arch/x86/kernel/apic/probe_64.c
@@ -67,17 +67,8 @@ void __init default_setup_apic_routing(v
 	}
 #endif
 
-	if (apic == &apic_flat) {
-		switch (boot_cpu_data.x86_vendor) {
-		case X86_VENDOR_INTEL:
-			if (num_processors > 8)
-				apic = &apic_physflat;
-			break;
-		case X86_VENDOR_AMD:
-			if (max_physical_apicid >= 8)
-				apic = &apic_physflat;
-		}
-	}
+	if (apic == &apic_flat && num_processors > 8)
+		apic = &apic_physflat;
 
 	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
 

[PATCH -v2 3/5] x86: according to nr_cpu_ids to decide if need to leave logical flat

[Yinghai Lu]

should use nr_cpu_ids instead of num_processor, in case we have hotplug cpus.

if current only have 8 cpus is up, but if we will have more cpus that
will be hot added later, we should use physical flat at first.

nr_cpu_ids is the total cpus that could be supported.

-v2: per linus, chenage default_setup_apic_routing to _init, and call it for uni_processor

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/kernel/apic/apic.c     |    2 --
 arch/x86/kernel/apic/probe_32.c |   20 ++++++++++++++++++--
 arch/x86/kernel/apic/probe_64.c |    3 ++-
 arch/x86/kernel/smpboot.c       |    2 --
 4 files changed, 20 insertions(+), 7 deletions(-)

Index: linux-2.6/arch/x86/kernel/apic/probe_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/probe_32.c
+++ linux-2.6/arch/x86/kernel/apic/probe_32.c
@@ -52,7 +52,7 @@ static int __init print_ipi_mode(void)
 }
 late_initcall(print_ipi_mode);
 
-void default_setup_apic_routing(void)
+static void local_default_setup_apic_routing(void)
 {
 #ifdef CONFIG_X86_IO_APIC
 	printk(KERN_INFO
@@ -103,7 +103,7 @@ struct apic apic_default = {
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= default_setup_apic_routing,
+	.setup_apic_routing		= local_default_setup_apic_routing,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
@@ -207,6 +207,22 @@ void __init generic_bigsmp_probe(void)
 			apic = &apic_bigsmp;
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
 			       apic->name);
+		}
+	}
+#endif
+}
+
+void __init default_setup_apic_routing(void)
+{
+#ifdef CONFIG_X86_BIGSMP
+	/*
+	 * make sure we go to bigsmp according to real nr_cpu_ids
+	 */
+	if (!cmdline_apic && apic == &apic_default) {
+		if (nr_cpu_ids > 8) {
+			apic = &apic_bigsmp;
+			printk(KERN_INFO "Overriding APIC driver with %s\n",
+			       apic->name);
 		}
 	}
 #endif
Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -1083,9 +1083,7 @@ void __init native_smp_prepare_cpus(unsi
 	set_cpu_sibling_map(0);
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	if (smp_sanity_check(max_cpus) < 0) {
 		printk(KERN_INFO "SMP disabled\n");
Index: linux-2.6/arch/x86/kernel/apic/probe_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/probe_64.c
+++ linux-2.6/arch/x86/kernel/apic/probe_64.c
@@ -67,7 +67,8 @@ void __init default_setup_apic_routing(v
 	}
 #endif
 
-	if (apic == &apic_flat && num_processors > 8)
+	/* not just num_processors, we could have hotplug cpus */
+	if (apic == &apic_flat && nr_cpu_ids > 8)
 		apic = &apic_physflat;
 
 	printk(KERN_INFO "Setting APIC routing to %s\n", apic->name);
Index: linux-2.6/arch/x86/kernel/apic/apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/apic.c
+++ linux-2.6/arch/x86/kernel/apic/apic.c
@@ -1647,9 +1647,7 @@ int __init APIC_init_uniprocessor(void)
 #endif
 
 	enable_IR_x2apic();
-#ifdef CONFIG_X86_64
 	default_setup_apic_routing();
-#endif
 
 	verify_local_APIC();
 	connect_bsp_APIC();

[PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Yinghai Lu]

some systems that have disable cpus entries because same
  BIOS will support 2 sockets and 4 sockets and more at
  same time, BIOS just leave some disable entries, but
  those system do not support cpu hotplug. we don't need
  treat disabled_cpus as hotplug cpus.
so we can make nr_cpu_ids smaller and save more space
  (pcpu data allocations), and could make some systems run
  with logical flat instead of physical flat apic mode

-v2: change to black list instead

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/kernel/smpboot.c |   76 ++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 74 insertions(+), 2 deletions(-)

Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -47,6 +47,7 @@
 #include <linux/bootmem.h>
 #include <linux/err.h>
 #include <linux/nmi.h>
+#include <linux/dmi.h>
 #include <linux/tboot.h>
 
 #include <asm/acpi.h>
@@ -1178,6 +1179,59 @@ static int __init _setup_possible_cpus(c
 }
 early_param("possible_cpus", _setup_possible_cpus);
 
+static __initdata int treat_disabled_cpus_as_hotplug = 1;
+static __init int hotplug_cpus_check(const struct dmi_system_id *d)
+{
+        printk(KERN_NOTICE "%s detected: treat disabled cpus as hotplug ones\n", d->ident);
+        treat_disabled_cpus_as_hotplug = 0;
+
+        return 0;
+}
+
+static struct dmi_system_id hotplug_cpus_dmi_table[] __initdata = {
+        {
+                .callback = hotplug_cpus_check,
+                .ident = "Sun Microsystems Sun Fire X4440",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4440"),
+                },
+        },
+        {
+                .callback = hotplug_cpus_check,
+                .ident = "Sun Microsystems Sun Fire X4240",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4240"),
+                },
+        },
+        {
+                .callback = hotplug_cpus_check,
+                .ident = "Sun Microsystems Sun Fire X4140",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4140"),
+                },
+        },
+        {
+                .callback = hotplug_cpus_check,
+                .ident = "Sun Microsystems Sun Fire X4600",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4600"),
+                },
+        },
+        {
+                .callback = hotplug_cpus_check,
+                .ident = "Sun Microsystems Sun Fire X4640",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4640"),
+                },
+        },
+        { } /* NULL entry stops DMI scanning */
+};
+
 
 /*
  * cpu_possible_mask should be static, it cannot change as cpu's
@@ -1204,8 +1258,26 @@ __init void prefill_possible_map(void)
 	if (!num_processors)
 		num_processors = 1;
 
-	if (setup_possible_cpus == -1)
-		possible = num_processors + disabled_cpus;
+	if (setup_possible_cpus == -1) {
+		possible = num_processors;
+		/*
+		 * do we have better way to detect hotplug cpus?
+		 *
+		 * some systems that have disable cpus entries because same
+		 *  BIOS will support 2 sockets and 4 sockets and more at
+		 *  same time, BIOS just leave some disabled entries with wild
+		 *  apicid, but those system do not support cpu hotplug.
+		 *  we don't need treat disabled_cpus as hotplug cpus.
+		 * so we can make nr_cpu_ids smaller and save more space
+		 *  (pcpu data allocations), and could make some systems run
+		 *  with logical flat instead of physical flat apic mode
+		 */
+		if (disabled_cpus) {
+			dmi_check_system(hotplug_cpus_dmi_table);
+			if (treat_disabled_cpus_as_hotplug)
+				possible += disabled_cpus;
+		}
+	}
 	else
 		possible = setup_possible_cpus;
 

[PATCH 4/5] x86: make 32bit apic flat to physflat switch like 64bit

[Yinghai Lu]

kill def_to_bigsmp
and move switch from default to bigsmp at default_setup_apic_routing...
so make default_setup_apic_routing more like 64 bit
also make the dmi relate code to be __init/__initdata

Signed-off-by: Yinghai Lu <yinghai@kernel.org>

---
 arch/x86/include/asm/apic.h      |    3 -
 arch/x86/include/asm/mpspec.h    |    1 
 arch/x86/kernel/acpi/boot.c      |    3 -
 arch/x86/kernel/apic/apic.c      |    5 --
 arch/x86/kernel/apic/bigsmp_32.c |   48 -----------------------
 arch/x86/kernel/apic/probe_32.c  |   80 ++++++++++++++++++++-------------------
 arch/x86/kernel/mpparse.c        |    4 -
 arch/x86/kernel/setup.c          |    2 
 arch/x86/kernel/smpboot.c        |    2 
 9 files changed, 46 insertions(+), 102 deletions(-)

Index: linux-2.6/arch/x86/include/asm/mpspec.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/mpspec.h
+++ linux-2.6/arch/x86/include/asm/mpspec.h
@@ -23,7 +23,6 @@ extern int pic_mode;
 
 #define MAX_IRQ_SOURCES		256
 
-extern unsigned int def_to_bigsmp;
 extern u8 apicid_2_node[];
 
 #ifdef CONFIG_X86_NUMAQ
Index: linux-2.6/arch/x86/kernel/apic/apic.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/apic.c
+++ linux-2.6/arch/x86/kernel/apic/apic.c
@@ -1895,11 +1895,6 @@ void __cpuinit generic_processor_info(in
 	if (apicid > max_physical_apicid)
 		max_physical_apicid = apicid;
 
-#ifdef CONFIG_X86_32
-	if (num_processors > 8)
-		def_to_bigsmp = 1;
-#endif
-
 #if defined(CONFIG_SMP) || defined(CONFIG_X86_64)
 	early_per_cpu(x86_cpu_to_apicid, cpu) = apicid;
 	early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
Index: linux-2.6/arch/x86/kernel/apic/bigsmp_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/bigsmp_32.c
+++ linux-2.6/arch/x86/kernel/apic/bigsmp_32.c
@@ -7,7 +7,6 @@
 #include <linux/cpumask.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/dmi.h>
 #include <linux/smp.h>
 
 #include <asm/apicdef.h>
@@ -73,13 +72,6 @@ static void bigsmp_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-static void bigsmp_setup_apic_routing(void)
-{
-	printk(KERN_INFO
-		"Enabling APIC mode:  Physflat.  Using %d I/O APICs\n",
-		nr_ioapics);
-}
-
 static int bigsmp_apicid_to_node(int logical_apicid)
 {
 	return apicid_2_node[hard_smp_processor_id()];
@@ -154,52 +146,16 @@ static void bigsmp_send_IPI_all(int vect
 	bigsmp_send_IPI_mask(cpu_online_mask, vector);
 }
 
-static int dmi_bigsmp; /* can be set by dmi scanners */
-
-static int hp_ht_bigsmp(const struct dmi_system_id *d)
-{
-	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
-	dmi_bigsmp = 1;
-
-	return 0;
-}
-
-
-static const struct dmi_system_id bigsmp_dmi_table[] = {
-	{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
-		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-			DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
-		}
-	},
-
-	{ hp_ht_bigsmp, "HP ProLiant DL740",
-		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
-			DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
-		}
-	},
-	{ } /* NULL entry stops DMI scanning */
-};
-
 static void bigsmp_vector_allocation_domain(int cpu, struct cpumask *retmask)
 {
 	cpumask_clear(retmask);
 	cpumask_set_cpu(cpu, retmask);
 }
 
-static int probe_bigsmp(void)
-{
-	if (def_to_bigsmp)
-		dmi_bigsmp = 1;
-	else
-		dmi_check_system(bigsmp_dmi_table);
-
-	return dmi_bigsmp;
-}
-
 struct apic apic_bigsmp = {
 
 	.name				= "bigsmp",
-	.probe				= probe_bigsmp,
+	.probe				= NULL,
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= bigsmp_apic_id_registered,
 
@@ -217,7 +173,7 @@ struct apic apic_bigsmp = {
 	.init_apic_ldr			= bigsmp_init_apic_ldr,
 
 	.ioapic_phys_id_map		= bigsmp_ioapic_phys_id_map,
-	.setup_apic_routing		= bigsmp_setup_apic_routing,
+	.setup_apic_routing		= NULL,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= bigsmp_apicid_to_node,
 	.cpu_to_logical_apicid		= bigsmp_cpu_to_logical_apicid,
Index: linux-2.6/arch/x86/kernel/apic/probe_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/apic/probe_32.c
+++ linux-2.6/arch/x86/kernel/apic/probe_32.c
@@ -14,6 +14,8 @@
 #include <linux/ctype.h>
 #include <linux/init.h>
 #include <linux/errno.h>
+#include <linux/dmi.h>
+
 #include <asm/fixmap.h>
 #include <asm/mpspec.h>
 #include <asm/apicdef.h>
@@ -52,15 +54,6 @@ static int __init print_ipi_mode(void)
 }
 late_initcall(print_ipi_mode);
 
-static void local_default_setup_apic_routing(void)
-{
-#ifdef CONFIG_X86_IO_APIC
-	printk(KERN_INFO
-		"Enabling APIC mode:  Flat.  Using %d I/O APICs\n",
-		nr_ioapics);
-#endif
-}
-
 static void default_vector_allocation_domain(int cpu, struct cpumask *retmask)
 {
 	/*
@@ -76,16 +69,10 @@ static void default_vector_allocation_do
 	cpumask_bits(retmask)[0] = APIC_ALL_CPUS;
 }
 
-/* should be called last. */
-static int probe_default(void)
-{
-	return 1;
-}
-
 struct apic apic_default = {
 
 	.name				= "default",
-	.probe				= probe_default,
+	.probe				= NULL,
 	.acpi_madt_oem_check		= NULL,
 	.apic_id_registered		= default_apic_id_registered,
 
@@ -103,7 +90,7 @@ struct apic apic_default = {
 	.init_apic_ldr			= default_init_apic_ldr,
 
 	.ioapic_phys_id_map		= default_ioapic_phys_id_map,
-	.setup_apic_routing		= local_default_setup_apic_routing,
+	.setup_apic_routing		= NULL,
 	.multi_timer_check		= NULL,
 	.apicid_to_node			= default_apicid_to_node,
 	.cpu_to_logical_apicid		= default_cpu_to_logical_apicid,
@@ -192,24 +179,40 @@ static int __init parse_apic(char *arg)
 }
 early_param("apic", parse_apic);
 
-void __init generic_bigsmp_probe(void)
+static int dmi_bigsmp __initdata; /* can be set by dmi scanners */
+
+static int __init hp_ht_bigsmp(const struct dmi_system_id *d)
 {
-#ifdef CONFIG_X86_BIGSMP
-	/*
-	 * This routine is used to switch to bigsmp mode when
-	 * - There is no apic= option specified by the user
-	 * - generic_apic_probe() has chosen apic_default as the sub_arch
-	 * - we find more than 8 CPUs in acpi LAPIC listing with xAPIC support
-	 */
+	printk(KERN_NOTICE "%s detected: force use of apic=bigsmp\n", d->ident);
+	dmi_bigsmp = 1;
 
-	if (!cmdline_apic && apic == &apic_default) {
-		if (apic_bigsmp.probe()) {
-			apic = &apic_bigsmp;
-			printk(KERN_INFO "Overriding APIC driver with %s\n",
-			       apic->name);
+	return 0;
+}
+
+static struct dmi_system_id bigsmp_dmi_table[] __initdata = {
+	{ hp_ht_bigsmp, "HP ProLiant DL760 G2",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+			DMI_MATCH(DMI_BIOS_VERSION, "P44-"),
 		}
-	}
+	},
+
+	{ hp_ht_bigsmp, "HP ProLiant DL740",
+		{	DMI_MATCH(DMI_BIOS_VENDOR, "HP"),
+			DMI_MATCH(DMI_BIOS_VERSION, "P47-"),
+		}
+	},
+	{ } /* NULL entry stops DMI scanning */
+};
+
+static inline const char *get_apic_name(struct apic *apic)
+{
+	if (apic == &apic_default)
+		return "flat";
+#ifdef CONFIG_X86_BIGSMP
+	if (apic == &apic_bigsmp);
+		return "physical flat";
 #endif
+	return apic->name;
 }
 
 void __init default_setup_apic_routing(void)
@@ -219,13 +222,19 @@ void __init default_setup_apic_routing(v
 	 * make sure we go to bigsmp according to real nr_cpu_ids
 	 */
 	if (!cmdline_apic && apic == &apic_default) {
-		if (nr_cpu_ids > 8) {
+		dmi_check_system(bigsmp_dmi_table);
+		if (nr_cpu_ids > 8 || dmi_bigsmp) {
 			apic = &apic_bigsmp;
 			printk(KERN_INFO "Overriding APIC driver with %s\n",
-			       apic->name);
+			       get_apic_name(apic));
 		}
 	}
 #endif
+#ifdef CONFIG_X86_IO_APIC
+	printk(KERN_INFO
+		"Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+		get_apic_name(apic), nr_ioapics);
+#endif
 }
 
 void __init generic_apic_probe(void)
@@ -233,14 +242,11 @@ void __init generic_apic_probe(void)
 	if (!cmdline_apic) {
 		int i;
 		for (i = 0; apic_probe[i]; i++) {
-			if (apic_probe[i]->probe()) {
+			if (apic_probe[i]->probe && apic_probe[i]->probe()) {
 				apic = apic_probe[i];
 				break;
 			}
 		}
-		/* Not visible without early console */
-		if (!apic_probe[i])
-			panic("Didn't find an APIC driver");
 	}
 	printk(KERN_INFO "Using APIC driver %s\n", apic->name);
 }
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -184,8 +184,6 @@ static void set_mca_bus(int x)
 #endif
 }
 
-unsigned int def_to_bigsmp;
-
 /* for MCA, but anyone else can use it if they want */
 unsigned int machine_id;
 unsigned int machine_submodel_id;
Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -946,7 +946,7 @@ static int __init smp_sanity_check(unsig
 	preempt_disable();
 
 #if !defined(CONFIG_X86_BIGSMP) && defined(CONFIG_X86_32)
-	if (def_to_bigsmp && nr_cpu_ids > 8) {
+	if (apic == &apic_default && nr_cpu_ids > 8) {
 		unsigned int cpu;
 		unsigned nr;
 
Index: linux-2.6/arch/x86/include/asm/apic.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/apic.h
+++ linux-2.6/arch/x86/include/asm/apic.h
@@ -456,9 +456,6 @@ static inline void default_wait_for_init
 	return;
 }
 
-extern void generic_bigsmp_probe(void);
-
-
 #ifdef CONFIG_X86_LOCAL_APIC
 
 #include <asm/smp.h>
Index: linux-2.6/arch/x86/kernel/acpi/boot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/acpi/boot.c
+++ linux-2.6/arch/x86/kernel/acpi/boot.c
@@ -1185,9 +1185,6 @@ static void __init acpi_process_madt(voi
 		if (!error) {
 			acpi_lapic = 1;
 
-#ifdef CONFIG_X86_BIGSMP
-			generic_bigsmp_probe();
-#endif
 			/*
 			 * Parse MADT IO-APIC entries
 			 */
Index: linux-2.6/arch/x86/kernel/mpparse.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mpparse.c
+++ linux-2.6/arch/x86/kernel/mpparse.c
@@ -359,10 +359,6 @@ static int __init smp_read_mpc(struct mp
 		x86_init.mpparse.mpc_record(1);
 	}
 
-#ifdef CONFIG_X86_BIGSMP
-	generic_bigsmp_probe();
-#endif
-
 	if (apic->setup_apic_routing)
 		apic->setup_apic_routing();
 

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Suresh Siddha]

On Tue, 2010-01-12 at 15:17 -0800, Yinghai Lu wrote:
> some systems that have disable cpus entries because same
>   BIOS will support 2 sockets and 4 sockets and more at
>   same time, BIOS just leave some disable entries, but
>   those system do not support cpu hotplug. we don't need
>   treat disabled_cpus as hotplug cpus.
> so we can make nr_cpu_ids smaller and save more space
>   (pcpu data allocations), and could make some systems run
>   with logical flat instead of physical flat apic mode
> 
> -v2: change to black list instead

I don't think this list will work because every HT system with HT
disabled in the bios shows that logical cpu as disabled.

> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> 
> ---
>  arch/x86/kernel/smpboot.c |   76 ++++++++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 74 insertions(+), 2 deletions(-)
> 
> Index: linux-2.6/arch/x86/kernel/smpboot.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/smpboot.c
> +++ linux-2.6/arch/x86/kernel/smpboot.c
> @@ -47,6 +47,7 @@
>  #include <linux/bootmem.h>
>  #include <linux/err.h>
>  #include <linux/nmi.h>
> +#include <linux/dmi.h>
>  #include <linux/tboot.h>
>  
>  #include <asm/acpi.h>
> @@ -1178,6 +1179,59 @@ static int __init _setup_possible_cpus(c
>  }
>  early_param("possible_cpus", _setup_possible_cpus);
>  
> +static __initdata int treat_disabled_cpus_as_hotplug = 1;
> +static __init int hotplug_cpus_check(const struct dmi_system_id *d)
> +{
> +        printk(KERN_NOTICE "%s detected: treat disabled cpus as hotplug ones\n", d->ident);
> +        treat_disabled_cpus_as_hotplug = 0;
> +
> +        return 0;
> +}
> +
> +static struct dmi_system_id hotplug_cpus_dmi_table[] __initdata = {
> +        {
> +                .callback = hotplug_cpus_check,
> +                .ident = "Sun Microsystems Sun Fire X4440",
> +                .matches = {
> +                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4440"),
> +                },
> +        },
> +        {
> +                .callback = hotplug_cpus_check,
> +                .ident = "Sun Microsystems Sun Fire X4240",
> +                .matches = {
> +                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4240"),
> +                },
> +        },
> +        {
> +                .callback = hotplug_cpus_check,
> +                .ident = "Sun Microsystems Sun Fire X4140",
> +                .matches = {
> +                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4140"),
> +                },
> +        },
> +        {
> +                .callback = hotplug_cpus_check,
> +                .ident = "Sun Microsystems Sun Fire X4600",
> +                .matches = {
> +                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4600"),
> +                },
> +        },
> +        {
> +                .callback = hotplug_cpus_check,
> +                .ident = "Sun Microsystems Sun Fire X4640",
> +                .matches = {
> +                        DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"),
> +			DMI_MATCH(DMI_PRODUCT_NAME, "Sun Fire X4640"),
> +                },
> +        },
> +        { } /* NULL entry stops DMI scanning */
> +};
> +
>  
>  /*
>   * cpu_possible_mask should be static, it cannot change as cpu's
> @@ -1204,8 +1258,26 @@ __init void prefill_possible_map(void)
>  	if (!num_processors)
>  		num_processors = 1;
>  
> -	if (setup_possible_cpus == -1)
> -		possible = num_processors + disabled_cpus;
> +	if (setup_possible_cpus == -1) {
> +		possible = num_processors;
> +		/*
> +		 * do we have better way to detect hotplug cpus?
> +		 *
> +		 * some systems that have disable cpus entries because same
> +		 *  BIOS will support 2 sockets and 4 sockets and more at
> +		 *  same time, BIOS just leave some disabled entries with wild
> +		 *  apicid, but those system do not support cpu hotplug.
> +		 *  we don't need treat disabled_cpus as hotplug cpus.
> +		 * so we can make nr_cpu_ids smaller and save more space
> +		 *  (pcpu data allocations), and could make some systems run
> +		 *  with logical flat instead of physical flat apic mode
> +		 */
> +		if (disabled_cpus) {
> +			dmi_check_system(hotplug_cpus_dmi_table);
> +			if (treat_disabled_cpus_as_hotplug)
> +				possible += disabled_cpus;
> +		}
> +	}
>  	else
>  		possible = setup_possible_cpus;
>  

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Yinghai Lu]

On 01/12/2010 03:56 PM, Suresh Siddha wrote:
> On Tue, 2010-01-12 at 15:17 -0800, Yinghai Lu wrote:
>> some systems that have disable cpus entries because same
>>   BIOS will support 2 sockets and 4 sockets and more at
>>   same time, BIOS just leave some disable entries, but
>>   those system do not support cpu hotplug. we don't need
>>   treat disabled_cpus as hotplug cpus.
>> so we can make nr_cpu_ids smaller and save more space
>>   (pcpu data allocations), and could make some systems run
>>   with logical flat instead of physical flat apic mode
>>
>> -v2: change to black list instead
> 
> I don't think this list will work because every HT system with HT
> disabled in the bios shows that logical cpu as disabled.

so you want to treat those disabled cpus in the those system as hotplug cpus or not?

YH

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Suresh Siddha]

On Tue, 2010-01-12 at 16:05 -0800, Yinghai Lu wrote:
> On 01/12/2010 03:56 PM, Suresh Siddha wrote:
> > On Tue, 2010-01-12 at 15:17 -0800, Yinghai Lu wrote:
> >> some systems that have disable cpus entries because same
> >>   BIOS will support 2 sockets and 4 sockets and more at
> >>   same time, BIOS just leave some disable entries, but
> >>   those system do not support cpu hotplug. we don't need
> >>   treat disabled_cpus as hotplug cpus.
> >> so we can make nr_cpu_ids smaller and save more space
> >>   (pcpu data allocations), and could make some systems run
> >>   with logical flat instead of physical flat apic mode
> >>
> >> -v2: change to black list instead
> > 
> > I don't think this list will work because every HT system with HT
> > disabled in the bios shows that logical cpu as disabled.
> 
> so you want to treat those disabled cpus in the those system as hotplug cpus or not?

They are really not hot plug cpus, so they can also take advantage of
what you are trying to provide with this patch.

Also I am very confused with what exactly you are doing with the dmi
list..

+        printk(KERN_NOTICE "%s detected: treat disabled cpus as hotplug ones\n", d->ident);
+        treat_disabled_cpus_as_hotplug = 0;

???

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Yinghai Lu]

On 01/12/2010 05:48 PM, Suresh Siddha wrote:
> On Tue, 2010-01-12 at 16:05 -0800, Yinghai Lu wrote:
>> On 01/12/2010 03:56 PM, Suresh Siddha wrote:
>>> On Tue, 2010-01-12 at 15:17 -0800, Yinghai Lu wrote:
>>>> some systems that have disable cpus entries because same
>>>>   BIOS will support 2 sockets and 4 sockets and more at
>>>>   same time, BIOS just leave some disable entries, but
>>>>   those system do not support cpu hotplug. we don't need
>>>>   treat disabled_cpus as hotplug cpus.
>>>> so we can make nr_cpu_ids smaller and save more space
>>>>   (pcpu data allocations), and could make some systems run
>>>>   with logical flat instead of physical flat apic mode
>>>>
>>>> -v2: change to black list instead
>>>
>>> I don't think this list will work because every HT system with HT
>>> disabled in the bios shows that logical cpu as disabled.
>>
>> so you want to treat those disabled cpus in the those system as hotplug cpus or not?
> 
> They are really not hot plug cpus, so they can also take advantage of
> what you are trying to provide with this patch.

you mean this blacklist could be too long?

switch to whitelist for the box can treat disabled cpus as hotplug cpus?

> 
> Also I am very confused with what exactly you are doing with the dmi
> list..
> 
> +        printk(KERN_NOTICE "%s detected: treat disabled cpus as hotplug ones\n", d->ident);
> +        treat_disabled_cpus_as_hotplug = 0;
> 
sorry, forget to change the print out.

YH

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Suresh Siddha]

On Tue, 2010-01-12 at 17:55 -0800, Yinghai Lu wrote:
> you mean this blacklist could be too long?

yes.

> 
> switch to whitelist for the box can treat disabled cpus as hotplug
> cpus?

Do we really need all this? Systems which support physical hotplug
typically have lot's of cpu's (mostly will have atleast > 8). Even if we
really need to identify, then perhaps we can check if ACPI has any hints
regarding the physical hotplug support at boot time (we should check
with Andi Kleen or Len Brown on this).

For now, I think we can keep it simple by using the detected enabled
cpu's.

thanks,
suresh

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Yinghai Lu]

On 01/12/2010 06:06 PM, Suresh Siddha wrote:
> On Tue, 2010-01-12 at 17:55 -0800, Yinghai Lu wrote:
>> you mean this blacklist could be too long?
> 
> yes.
> 
>>
>> switch to whitelist for the box can treat disabled cpus as hotplug
>> cpus?
> 
> Do we really need all this? Systems which support physical hotplug
> typically have lot's of cpu's (mostly will have atleast > 8). Even if we
> really need to identify, then perhaps we can check if ACPI has any hints
> regarding the physical hotplug support at boot time (we should check
> with Andi Kleen or Len Brown on this).
> 
> For now, I think we can keep it simple by using the detected enabled
> cpu's.

sth like this ?

---
 arch/x86/kernel/smpboot.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Index: linux-2.6/arch/x86/kernel/smpboot.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/smpboot.c
+++ linux-2.6/arch/x86/kernel/smpboot.c
@@ -1190,7 +1190,6 @@ early_param("possible_cpus", _setup_poss
  * - Ashok Raj
  *
  * Three ways to find out the number of additional hotplug CPUs:
- * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
  * - The user can overwrite it with possible_cpus=NUM
  * - Otherwise don't reserve additional CPUs.
  * We do this because additional CPUs waste a lot of memory.
@@ -1205,7 +1204,7 @@ __init void prefill_possible_map(void)
 		num_processors = 1;
 
 	if (setup_possible_cpus == -1)
-		possible = num_processors + disabled_cpus;
+		possible = num_processors;
 	else
 		possible = setup_possible_cpus;
 

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Suresh Siddha]

On Tue, 2010-01-12 at 18:13 -0800, Yinghai Lu wrote:
> On 01/12/2010 06:06 PM, Suresh Siddha wrote:
> > On Tue, 2010-01-12 at 17:55 -0800, Yinghai Lu wrote:
> >> you mean this blacklist could be too long?
> > 
> > yes.
> > 
> >>
> >> switch to whitelist for the box can treat disabled cpus as hotplug
> >> cpus?
> > 
> > Do we really need all this? Systems which support physical hotplug
> > typically have lot's of cpu's (mostly will have atleast > 8). Even if we
> > really need to identify, then perhaps we can check if ACPI has any hints
> > regarding the physical hotplug support at boot time (we should check
> > with Andi Kleen or Len Brown on this).
> > 
> > For now, I think we can keep it simple by using the detected enabled
> > cpu's.
> 
> sth like this ?

Well, I was referring more to the apic model selection than the prefill
case. About this possible cpu's, will the wastage be more than few kb
for few disabled cpu's.

thanks,
suresh

> ---
>  arch/x86/kernel/smpboot.c |    3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> Index: linux-2.6/arch/x86/kernel/smpboot.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/smpboot.c
> +++ linux-2.6/arch/x86/kernel/smpboot.c
> @@ -1190,7 +1190,6 @@ early_param("possible_cpus", _setup_poss
>   * - Ashok Raj
>   *
>   * Three ways to find out the number of additional hotplug CPUs:
> - * - If the BIOS specified disabled CPUs in ACPI/mptables use that.
>   * - The user can overwrite it with possible_cpus=NUM
>   * - Otherwise don't reserve additional CPUs.
>   * We do this because additional CPUs waste a lot of memory.
> @@ -1205,7 +1204,7 @@ __init void prefill_possible_map(void)
>  		num_processors = 1;
>  
>  	if (setup_possible_cpus == -1)
> -		possible = num_processors + disabled_cpus;
> +		possible = num_processors;
>  	else
>  		possible = setup_possible_cpus;
>  

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Yinghai Lu]

On 01/12/2010 06:21 PM, Suresh Siddha wrote:
> On Tue, 2010-01-12 at 18:13 -0800, Yinghai Lu wrote:
>> On 01/12/2010 06:06 PM, Suresh Siddha wrote:
>>> On Tue, 2010-01-12 at 17:55 -0800, Yinghai Lu wrote:
>>>> you mean this blacklist could be too long?
>>>
>>> yes.
>>>
>>>>
>>>> switch to whitelist for the box can treat disabled cpus as hotplug
>>>> cpus?
>>>
>>> Do we really need all this? Systems which support physical hotplug
>>> typically have lot's of cpu's (mostly will have atleast > 8). Even if we
>>> really need to identify, then perhaps we can check if ACPI has any hints
>>> regarding the physical hotplug support at boot time (we should check
>>> with Andi Kleen or Len Brown on this).
>>>
>>> For now, I think we can keep it simple by using the detected enabled
>>> cpu's.
>>
>> sth like this ?
> 
> Well, I was referring more to the apic model selection than the prefill
> case. About this possible cpu's, will the wastage be more than few kb
> for few disabled cpu's.

for 8 sockets systems if only have two cpus instatalled.

that disabled cpus will be 6 * 8 * 2 = 96.

and per_cpu area is about per cpu 2M, so will waste about 96 x 2M

YH

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Andi Kleen]

Yinghai Lu <yinghai@kernel.org> writes:
>
> so you want to treat those disabled cpus in the those system as hotplug cpus or not?

Why not? It's not that a hotplug cpu is particularly expensive.
It's just a bunch of memory and not even very much of it.

White and blacklists just to save a small amount of memory
seem like a bad idea.

-Andi

-- 
ak@linux.intel.com -- Speaking for myself only.

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[H. Peter Anvin]

On 01/13/2010 01:46 PM, Andi Kleen wrote:
> Yinghai Lu <yinghai@kernel.org> writes:
>>
>> so you want to treat those disabled cpus in the those system as hotplug cpus or not?
> 
> Why not? It's not that a hotplug cpu is particularly expensive.
> It's just a bunch of memory and not even very much of it.
> 
> White and blacklists just to save a small amount of memory
> seem like a bad idea.
> 

There are configurations in which percpu memory is in the megabytes.
This is exactly why we need high water mark allocation of percpu memory:
for configurations where there are possible hotpluggable CPU sockets
(which may be virtual, and a lot larger number than necessary) we
shouldn't need to allocate memory for a processor which has never been
added and is net unlikely to ever be added.  The only alternative is to
go to great length to keep the
(percpu memory) x (possible cpus - actual cpus) product as small as
possible, which is shortchanging the utility of the percpu memory system.

	-hpa

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Andi Kleen]

> There are configurations in which percpu memory is in the megabytes.

There used to be some like this (with some broken debug code), but they
got all fixed i believe to only allocate on real cpu hotplug. 

If not the right way is to fix them, not add DMI blacklists.

Beside when you enable debug code you probably don't care about 
a few MB too much.

> This is exactly why we need high water mark allocation of percpu memory:

No we just need to fix any percpu pigs (if there are really any left,
I did a couple of patches some time ago)

"Don't work around broken code -- fix it"

-Andi
-- 
ak@linux.intel.com -- Speaking for myself only.

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[H. Peter Anvin]

On 01/13/2010 02:23 PM, Andi Kleen wrote:
>> There are configurations in which percpu memory is in the megabytes.
> 
> There used to be some like this (with some broken debug code), but they
> got all fixed i believe to only allocate on real cpu hotplug. 
> 
> If not the right way is to fix them, not add DMI blacklists.
> 
> Beside when you enable debug code you probably don't care about 
> a few MB too much.
> 
>> This is exactly why we need high water mark allocation of percpu memory:
> 
> No we just need to fix any percpu pigs (if there are really any left,
> I did a couple of patches some time ago)
> 
> "Don't work around broken code -- fix it"
> 

Well, that *is* working around broken code, in this case the broken code
is the percpu allocation strategy.

	-hpa

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Suresh Siddha]

On Wed, 2010-01-13 at 14:27 -0800, H. Peter Anvin wrote:
> On 01/13/2010 02:23 PM, Andi Kleen wrote:
> >> There are configurations in which percpu memory is in the megabytes.
> > 
> > There used to be some like this (with some broken debug code), but they
> > got all fixed i believe to only allocate on real cpu hotplug. 
> > 
> > If not the right way is to fix them, not add DMI blacklists.
> > 
> > Beside when you enable debug code you probably don't care about 
> > a few MB too much.
> > 
> >> This is exactly why we need high water mark allocation of percpu memory:
> > 
> > No we just need to fix any percpu pigs (if there are really any left,
> > I did a couple of patches some time ago)
> > 
> > "Don't work around broken code -- fix it"
> > 
> 
> Well, that *is* working around broken code, in this case the broken code
> is the percpu allocation strategy.

Andi, Recently percpu folks changed the per-cpu static first chunk to
PMD SIZE right. I think that is what causing all this issue.

thanks,
suresh

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[H. Peter Anvin]

On 01/13/2010 02:29 PM, Suresh Siddha wrote:
>>
>> Well, that *is* working around broken code, in this case the broken code
>> is the percpu allocation strategy.
> 
> Andi, Recently percpu folks changed the per-cpu static first chunk to
> PMD SIZE right. I think that is what causing all this issue.
> 

Please don't tell me we're allocating 2 MB per CPU and throwing away
most of it...
	
	-hpa

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Suresh Siddha]

On Wed, 2010-01-13 at 14:36 -0800, H. Peter Anvin wrote:
> On 01/13/2010 02:29 PM, Suresh Siddha wrote:
> >>
> >> Well, that *is* working around broken code, in this case the broken code
> >> is the percpu allocation strategy.
> > 
> > Andi, Recently percpu folks changed the per-cpu static first chunk to
> > PMD SIZE right. I think that is what causing all this issue.
> > 
> 
> Please don't tell me we're allocating 2 MB per CPU and throwing away
> most of it...

Looking at the percpu code, they do seem to free the unused memory in
that hole.

Yinghai, what are the configurations that need MB's of per cpu area?

thanks,
suresh

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Yinghai Lu]

[-- Attachment #1: Type: text/plain, Size: 706 bytes --]

On 01/13/2010 02:49 PM, Suresh Siddha wrote:
> On Wed, 2010-01-13 at 14:36 -0800, H. Peter Anvin wrote:
>> On 01/13/2010 02:29 PM, Suresh Siddha wrote:
>>>>
>>>> Well, that *is* working around broken code, in this case the broken code
>>>> is the percpu allocation strategy.
>>>
>>> Andi, Recently percpu folks changed the per-cpu static first chunk to
>>> PMD SIZE right. I think that is what causing all this issue.
>>>
>>
>> Please don't tell me we're allocating 2 MB per CPU and throwing away
>> most of it...
> 
> Looking at the percpu code, they do seem to free the unused memory in
> that hole.
> 
> Yinghai, what are the configurations that need MB's of per cpu area?

please check attached...

YH

[-- Attachment #2: config.fullx --]
[-- Type: text/plain, Size: 73256 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc2
# Mon Jan  4 15:06:51 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_GPIO=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-yh"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
# CONFIG_AUDIT is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TREE_PREEMPT_RCU is not set
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=21
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_TRACEPOINTS=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y

#
# GCOV-based kernel profiling
#
CONFIG_SLOW_WORK=y
CONFIG_SLOW_WORK_DEBUG=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CFQ_GROUP_IOSCHED is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
# CONFIG_MUTEX_SPIN_ON_OWNER is not set
CONFIG_FREEZER=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_X2APIC=y
CONFIG_SPARSE_IRQ=y
CONFIG_NUMA_IRQ_DESC=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=512
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
CONFIG_X86_MCE_INJECT=y
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_K8_NUMA=y
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=9
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=999999
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
# CONFIG_X86_RESERVE_LOW_64K is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y

#
# Power management and ACPI options
#
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_PM_RUNTIME=y
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_POWER_METER=y
CONFIG_ACPI_SYSFS_POWER=y
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_APEI=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_SFI is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_POWERNOW_K8=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Memory power savings
#
CONFIG_I7300_IDLE_IOAT_CHANNEL=y
CONFIG_I7300_IDLE=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
CONFIG_INTR_REMAP=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
CONFIG_PCIEAER_INJECT=y
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEBUG=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
CONFIG_PCI_STUB=y
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
# CONFIG_PCMCIA is not set
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PCCARD_NONSTATIC=y
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
CONFIG_HOTPLUG_PCI_CPCI=y
# CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=y
CONFIG_HOTPLUG_PCI_SHPC=y

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
CONFIG_IP_DCCP=y
CONFIG_INET_DCCP_DIAG=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
CONFIG_IP_DCCP_TFRC_LIB=y

#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
CONFIG_RDS=y
CONFIG_RDS_RDMA=y
CONFIG_RDS_TCP=y
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=y
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="ql2100_fw.bin ql2300_fw.bin ql2400_fw.bin ql2200_fw.bin ql2322_fw.bin ql2500_fw.bin"
CONFIG_EXTRA_FIRMWARE_DIR="../firmware"
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_OSD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=262144
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=y
CONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=y
CONFIG_TIFM_7XX1=y
# CONFIG_ICS932S401 is not set
CONFIG_ENCLOSURE_SERVICES=y
# CONFIG_CS5535_MFGPT is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_DS1682 is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
CONFIG_EEPROM_AT25=y
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=y
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
# CONFIG_IWMC3200TOP is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_ENCLOSURE=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=y
CONFIG_SCSI_CXGB3_ISCSI=y
CONFIG_SCSI_BNX2_ISCSI=y
CONFIG_BE2ISCSI=y
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
CONFIG_SCSI_3W_9XXX=y
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
CONFIG_SCSI_AACRAID=y
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_BUILD_FIRMWARE is not set
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=y
CONFIG_SCSI_MVSAS_DEBUG=y
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
CONFIG_MEGARAID_LEGACY=y
CONFIG_MEGARAID_SAS=y
CONFIG_SCSI_MPT2SAS=y
CONFIG_SCSI_MPT2SAS_MAX_SGE=128
CONFIG_SCSI_MPT2SAS_LOGGING=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_VMWARE_PVSCSI is not set
CONFIG_LIBFC=y
CONFIG_LIBFCOE=y
CONFIG_FCOE=y
CONFIG_FCOE_FNIC=y
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
CONFIG_SCSI_QLA_FC=y
CONFIG_SCSI_QLA_ISCSI=y
CONFIG_SCSI_LPFC=y
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_PMCRAID=y
# CONFIG_SCSI_PM8001 is not set
CONFIG_SCSI_SRP=y
CONFIG_SCSI_BFA_FC=y
CONFIG_SCSI_DH=y
CONFIG_SCSI_DH_RDAC=y
# CONFIG_SCSI_DH_HP_SW is not set
# CONFIG_SCSI_DH_EMC is not set
# CONFIG_SCSI_DH_ALUA is not set
CONFIG_SCSI_OSD_INITIATOR=y
CONFIG_SCSI_OSD_ULD=y
CONFIG_SCSI_OSD_DPRINT_SENSE=1
CONFIG_SCSI_OSD_DEBUG=y
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
CONFIG_SATA_MV=y
CONFIG_SATA_NV=y
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=y
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
CONFIG_PATA_ATIIXP=y
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=y
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
CONFIG_PATA_VIA=y
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=y
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=y
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=y
CONFIG_FUSION_LAN=y
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#

#
# You can enable one or both FireWire driver stacks.
#

#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_VIDEO1394=y
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
CONFIG_MACVLAN=y
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
CONFIG_VETH=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=y
CONFIG_DAVICOM_PHY=y
CONFIG_QSEMI_PHY=y
CONFIG_LXT_PHY=y
CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
CONFIG_FORCEDETH_NAPI=y
CONFIG_E100=y
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
CONFIG_IGB=y
CONFIG_IGB_DCA=y
CONFIG_IGBVF=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
CONFIG_SKGE=y
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_VIA_VELOCITY=y
CONFIG_TIGON3=y
CONFIG_BNX2=y
CONFIG_CNIC=y
CONFIG_QLA3XXX=y
CONFIG_ATL1=y
CONFIG_ATL1E=y
CONFIG_ATL1C=y
CONFIG_JME=y
CONFIG_NETDEV_10000=y
CONFIG_MDIO=y
CONFIG_CHELSIO_T1=y
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T3_DEPENDS=y
CONFIG_CHELSIO_T3=y
CONFIG_ENIC=y
CONFIG_IXGBE=y
CONFIG_IXGBE_DCA=y
CONFIG_IXGBEVF=y
CONFIG_IXGB=y
CONFIG_S2IO=y
CONFIG_MYRI10GE=y
CONFIG_MYRI10GE_DCA=y
CONFIG_NIU=y
CONFIG_MLX4_EN=y
CONFIG_MLX4_CORE=y
CONFIG_MLX4_DEBUG=y
CONFIG_TEHUTI=y
CONFIG_BNX2X=y
CONFIG_QLGE=y
CONFIG_SFC=y
CONFIG_BE2NET=y
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#

#
# USB Network Adapters
#
CONFIG_USB_CATC=y
CONFIG_USB_KAWETH=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_RTL8150=y
CONFIG_USB_USBNET=y
CONFIG_USB_NET_AX8817X=y
CONFIG_USB_NET_CDCETHER=y
# CONFIG_USB_NET_CDC_EEM is not set
CONFIG_USB_NET_DM9601=y
CONFIG_USB_NET_SMSC95XX=y
CONFIG_USB_NET_GL620A=y
CONFIG_USB_NET_NET1080=y
CONFIG_USB_NET_PLUSB=y
CONFIG_USB_NET_MCS7830=y
CONFIG_USB_NET_RNDIS_HOST=y
CONFIG_USB_NET_CDC_SUBSET=y
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=y
# CONFIG_USB_NET_INT51X1 is not set
# CONFIG_WAN is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
CONFIG_SKFP=y
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_NET_FC=y
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
CONFIG_VIRTIO_NET=y
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=y
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
# CONFIG_IPMI_WATCHDOG is not set
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_VIA=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=y
CONFIG_TCG_TIS=y
CONFIG_TCG_NSC=y
CONFIG_TCG_ATMEL=y
CONFIG_TCG_INFINEON=y
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_ISCH=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
# CONFIG_SPI_GPIO is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_DESIGNWARE is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set

#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
CONFIG_GPIOLIB=y
# CONFIG_DEBUG_GPIO is not set
CONFIG_GPIO_SYSFS=y

#
# Memory mapped GPIO expanders:
#

#
# I2C GPIO expanders:
#
CONFIG_GPIO_MAX732X=y
CONFIG_GPIO_PCA953X=y
CONFIG_GPIO_PCF857X=y

#
# PCI GPIO expanders:
#
# CONFIG_GPIO_CS5535 is not set
CONFIG_GPIO_BT8XX=y
# CONFIG_GPIO_LANGWELL is not set

#
# SPI GPIO expanders:
#
CONFIG_GPIO_MAX7301=y
CONFIG_GPIO_MCP23S08=y
# CONFIG_GPIO_MC33880 is not set

#
# AC97 GPIO expanders:
#
CONFIG_W1=y
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=y
CONFIG_W1_MASTER_DS2490=y
CONFIG_W1_MASTER_DS2482=y
CONFIG_W1_MASTER_GPIO=y

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=y
CONFIG_W1_SLAVE_SMEM=y
# CONFIG_W1_SLAVE_DS2431 is not set
CONFIG_W1_SLAVE_DS2433=y
# CONFIG_W1_SLAVE_DS2433_CRC is not set
CONFIG_W1_SLAVE_DS2760=y
# CONFIG_W1_SLAVE_BQ27000 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
CONFIG_SENSORS_ADM1026=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_K8TEMP=y
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=y
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
CONFIG_SENSORS_PC87427=y
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_DME1737=y
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
CONFIG_SENSORS_SMSC47B397=y
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
CONFIG_SENSORS_W83627HF=y
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_88PM8607 is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
CONFIG_MEDIA_SUPPORT=y

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
CONFIG_DVB_CORE=y
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
CONFIG_IR_CORE=y
CONFIG_VIDEO_IR=y
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF_GEN=y
CONFIG_VIDEOBUF_VMALLOC=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=y
CONFIG_VIDEO_VIVI=y
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_SAA7164 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_SOC_CAMERA=y
# CONFIG_SOC_CAMERA_MT9M001 is not set
# CONFIG_SOC_CAMERA_MT9M111 is not set
# CONFIG_SOC_CAMERA_MT9T031 is not set
# CONFIG_SOC_CAMERA_MT9T112 is not set
# CONFIG_SOC_CAMERA_MT9V022 is not set
# CONFIG_SOC_CAMERA_RJ54N1 is not set
# CONFIG_SOC_CAMERA_TW9910 is not set
# CONFIG_SOC_CAMERA_PLATFORM is not set
# CONFIG_SOC_CAMERA_OV772X is not set
# CONFIG_SOC_CAMERA_OV9640 is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=y
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
CONFIG_USB_GSPCA_SPCA505=y
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_ZC0301 is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_TEF6862 is not set
CONFIG_DVB_MAX_ADAPTERS=8
CONFIG_DVB_DYNAMIC_MINORS=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_SMS_SIANO_MDTV is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set

#
# Supported FireWire (IEEE 1394) Adapters
#
# CONFIG_DVB_FIREDTV is not set

#
# Supported Earthsoft PT1 Adapters
#
# CONFIG_DVB_PT1 is not set

#
# Supported DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
CONFIG_DAB=y
CONFIG_USB_DABUSB=y

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FONT_8x16=y
CONFIG_SOUND=y
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
CONFIG_SND_SERIAL_U16550=y
CONFIG_SND_MPU401=y
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_INPUT_JACK is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
# CONFIG_SND_HDA_POWER_SAVE is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=y
CONFIG_SND_INTEL8X0M=y
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=y
# CONFIG_SND_USB_USX2Y is not set
CONFIG_SND_USB_CAIAQ=y
CONFIG_SND_USB_CAIAQ_INPUT=y
# CONFIG_SND_USB_US122L is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_I2C_AND_SPI=y
# CONFIG_SND_SOC_ALL_CODECS is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_MON is not set
CONFIG_USB_WUSB=y
CONFIG_USB_WUSB_CBAF=y
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_C67X00_HCD=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_HCD_DEBUGGING=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_OXU210HP_HCD=y
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_ISP1362_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
CONFIG_USB_R8A66597_HCD=y
CONFIG_USB_HWA_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_WDM=y
CONFIG_USB_TMC=y

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
CONFIG_USB_SERIAL_DEBUG=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=y
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=y
CONFIG_USB_CYPRESS_CY7C63=y
CONFIG_USB_CYTHERM=y
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=y
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set

#
# OTG and related infrastructure
#
CONFIG_USB_OTG_UTILS=y
# CONFIG_USB_GPIO_VBUS is not set
CONFIG_NOP_USB_XCEIV=y
CONFIG_UWB=y
CONFIG_UWB_HWA=y
CONFIG_UWB_WHCI=y
CONFIG_UWB_WLP=y
CONFIG_UWB_I1480U=y
CONFIG_UWB_I1480U_WLP=y
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=y
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=y
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PCI=y
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_WBSD=y
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_TIFM_SD=y
CONFIG_MMC_SPI=y
CONFIG_MMC_CB710=y
CONFIG_MMC_VIA_SDMMC=y
CONFIG_MEMSTICK=y
CONFIG_MEMSTICK_DEBUG=y

#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=y

#
# MemoryStick Host Controller Drivers
#
CONFIG_MEMSTICK_TIFM_MS=y
CONFIG_MEMSTICK_JMICRON_38X=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_GPIO is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_DAC124S085 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_LT3593 is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=y
CONFIG_INFINIBAND_USER_MAD=y
CONFIG_INFINIBAND_USER_ACCESS=y
CONFIG_INFINIBAND_USER_MEM=y
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=y
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=y
CONFIG_INFINIBAND_AMSO1100=y
CONFIG_INFINIBAND_AMSO1100_DEBUG=y
CONFIG_INFINIBAND_CXGB3=y
CONFIG_INFINIBAND_CXGB3_DEBUG=y
CONFIG_MLX4_INFINIBAND=y
CONFIG_INFINIBAND_NES=y
CONFIG_INFINIBAND_NES_DEBUG=y
CONFIG_INFINIBAND_IPOIB=y
CONFIG_INFINIBAND_IPOIB_CM=y
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=y
CONFIG_INFINIBAND_ISER=y
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y

#
# DMA Devices
#
CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH=y
CONFIG_INTEL_IOATDMA=y
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
CONFIG_DMATEST=m
CONFIG_DCA=y
CONFIG_AUXDISPLAY=y
CONFIG_UIO=y
# CONFIG_UIO_CIF is not set
CONFIG_UIO_PDRV=y
CONFIG_UIO_PDRV_GENIRQ=y
# CONFIG_UIO_SMX is not set
# CONFIG_UIO_AEC is not set
# CONFIG_UIO_SERCOS3 is not set
# CONFIG_UIO_PCI_GENERIC is not set

#
# TI VLYNQ
#
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_DELL_WMI is not set
# CONFIG_HP_WMI is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_EFI_VARS=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=y

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_FS_XIP=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=y
CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=y
CONFIG_OCFS2_FS_O2CB=y
CONFIG_OCFS2_FS_USERSPACE_CLUSTER=y
CONFIG_OCFS2_FS_STATS=y
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QUOTA_TREE=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_CUSE=y

#
# Caches
#
CONFIG_FSCACHE=y
CONFIG_FSCACHE_STATS=y
CONFIG_FSCACHE_HISTOGRAM=y
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=y
# CONFIG_CACHEFILES_DEBUG is not set
CONFIG_CACHEFILES_HISTOGRAM=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=y
CONFIG_MINIX_FS=y
CONFIG_OMFS_FS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_ROMFS_BACKED_BY_BLOCK=y
# CONFIG_ROMFS_BACKED_BY_MTD is not set
# CONFIG_ROMFS_BACKED_BY_BOTH is not set
CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=y
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
# CONFIG_EXOFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not set
CONFIG_ROOT_NFS=y
CONFIG_NFS_FSCACHE=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=y
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_LKDTM=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
# CONFIG_FAIL_IO_TIMEOUT is not set
CONFIG_FAULT_INJECTION_DEBUG_FS=y
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FTRACE_NMI_ENTER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACER_MAX_TRACE=y
CONFIG_RING_BUFFER=y
CONFIG_FTRACE_NMI_ENTER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
CONFIG_IRQSOFF_TRACER=y
CONFIG_SYSPROF_TRACER=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BOOT_TRACER=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_POWER_TRACER=y
CONFIG_KSYM_TRACER=y
# CONFIG_PROFILE_KSYM_TRACER is not set
CONFIG_STACK_TRACER=y
CONFIG_KMEMTRACE=y
CONFIG_WORKQUEUE_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENT=y
CONFIG_DYNAMIC_FTRACE=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
CONFIG_MMIOTRACE=y
# CONFIG_MMIOTRACE_TEST is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_TRACEPOINTS is not set
CONFIG_SAMPLE_TRACE_EVENTS=m
CONFIG_SAMPLE_KOBJECT=m
# CONFIG_SAMPLE_KPROBES is not set
# CONFIG_SAMPLE_HW_BREAKPOINT is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
CONFIG_EARLY_PRINTK_DBGP=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_X86_PTDUMP=y
# CONFIG_DEBUG_RODATA is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
CONFIG_SECURITYFS=y
# CONFIG_INTEL_TXT is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_ASYNC_PQ=y
CONFIG_ASYNC_RAID6_RECOV=y
CONFIG_ASYNC_TX_DISABLE_PQ_VAL_DMA=y
CONFIG_ASYNC_TX_DISABLE_XOR_VAL_DMA=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=y
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
CONFIG_KVM_INTEL=y
CONFIG_KVM_AMD=y
CONFIG_VIRTIO=y
CONFIG_VIRTIO_RING=y
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[H. Peter Anvin]

On 01/13/2010 03:02 PM, Yinghai Lu wrote:
> On 01/13/2010 02:49 PM, Suresh Siddha wrote:
>> On Wed, 2010-01-13 at 14:36 -0800, H. Peter Anvin wrote:
>>> On 01/13/2010 02:29 PM, Suresh Siddha wrote:
>>>>>
>>>>> Well, that *is* working around broken code, in this case the broken code
>>>>> is the percpu allocation strategy.
>>>>
>>>> Andi, Recently percpu folks changed the per-cpu static first chunk to
>>>> PMD SIZE right. I think that is what causing all this issue.
>>>>
>>>
>>> Please don't tell me we're allocating 2 MB per CPU and throwing away
>>> most of it...
>>
>> Looking at the percpu code, they do seem to free the unused memory in
>> that hole.
>>
>> Yinghai, what are the configurations that need MB's of per cpu area?
> 
> please check attached...
> 

I just built an allyesconfig kernel, and it has 1904K of percpu data.
1791K of that is in per_cpu__cpu_lock_stats.  So everything else is
~113K.  Still.  We should not be restricted from doing legitimately
large percpu allocations because of ghost cpus (and Tejun knows my
position on this), but it doesn't sound like the house is burning, either.

	-hpa

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Andi Kleen]

> I just built an allyesconfig kernel, and it has 1904K of percpu data.
> 1791K of that is in per_cpu__cpu_lock_stats.  So everything else is

Ok so we need to fix lock stats, I'll put it on my todo list.

> ~113K.  Still.  We should not be restricted from doing legitimately
> large percpu allocations because of ghost cpus (and Tejun knows my
> position on this), but it doesn't sound like the house is burning, either.

I think it's legitimate to require explicit allocation on
add/remove event for anything large.

Static per cpu is really only for "lazy users" anyways.

-Andi
-- 
ak@linux.intel.com -- Speaking for myself only.

Re: [PATCH -v2 5/5] x86: use dmi check to treat disabled cpus as hotplug cpus.

[Andi Kleen]

On Wed, Jan 13, 2010 at 02:49:18PM -0800, Suresh Siddha wrote:
> On Wed, 2010-01-13 at 14:36 -0800, H. Peter Anvin wrote:
> > On 01/13/2010 02:29 PM, Suresh Siddha wrote:
> > >>
> > >> Well, that *is* working around broken code, in this case the broken code
> > >> is the percpu allocation strategy.
> > > 
> > > Andi, Recently percpu folks changed the per-cpu static first chunk to
> > > PMD SIZE right. I think that is what causing all this issue.
> > > 
> > 
> > Please don't tell me we're allocating 2 MB per CPU and throwing away
> > most of it...
> 
> Looking at the percpu code, they do seem to free the unused memory in
> that hole.

I took a look at alloc_percpu() at least and it seems to always
allocate for all possible cpus.

Unfortunately we don't have a nice accounting mechanism for it in /proc,
perhaps we should. So it's unclear right now if that is a problem or not.

-Andi

-- 
ak@linux.intel.com -- Speaking for myself only.