From: Yinghai Lu <yinghai@kernel.org>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ingo Molnar <mingo@elte.hu>,
Linus Torvalds <torvalds@linux-foundation.org>,
Ivan Kokshaysky <ink@jurassic.park.msu.ru>,
Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>,
Alex Chiang <achiang@hp.com>,
Bjorn Helgaas <bjorn.helgaas@hp.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org
Subject: Re: [PATCH 10/14] pci: pciehp clean flow in pciehp_configure_device
Date: Fri, 15 Jan 2010 13:14:31 -0800 [thread overview]
Message-ID: <4B50DAB7.80209@kernel.org> (raw)
In-Reply-To: <20100115111445.4a1312d1@jbarnes-piketon>
On 01/15/2010 11:14 AM, Jesse Barnes wrote:
> On Tue, 22 Dec 2009 15:02:30 -0800
> Yinghai Lu <yinghai@kernel.org> wrote:
>
>> move out bus_size_bridges and assign resources out of
>> pciehp_add_bridge() and at last do them all together one time
>> including slot bridge, to avoid to call assign resources several
>> times, when there are several bridges under the slot bridge.
>> use pci_assign_nassigned_bridge_resources
>>
>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>> ---
>> drivers/pci/hotplug/pciehp_pci.c | 23 +++++++++++++++++------
>> 1 files changed, 17 insertions(+), 6 deletions(-)
>>
>> diff --git a/drivers/pci/hotplug/pciehp_pci.c
>> b/drivers/pci/hotplug/pciehp_pci.c index 2173310..0a16444 100644
>> --- a/drivers/pci/hotplug/pciehp_pci.c
>> +++ b/drivers/pci/hotplug/pciehp_pci.c
>> @@ -53,17 +53,15 @@ static int __ref pciehp_add_bridge(struct pci_dev
>> *dev) busnr = pci_scan_bridge(parent, dev, busnr, pass);
>> if (!dev->subordinate)
>> return -1;
>> - pci_bus_size_bridges(dev->subordinate);
>> - pci_bus_assign_resources(parent);
>> - pci_enable_bridges(parent);
>> - pci_bus_add_devices(parent);
>> +
>> return 0;
>> }
>>
>> int pciehp_configure_device(struct slot *p_slot)
>> {
>> struct pci_dev *dev;
>> - struct pci_bus *parent =
>> p_slot->ctrl->pcie->port->subordinate;
>> + struct pci_dev *bridge = p_slot->ctrl->pcie->port;
>> + struct pci_bus *parent = bridge->subordinate;
>> int num, fn;
>> struct controller *ctrl = p_slot->ctrl;
>>
>> @@ -96,12 +94,25 @@ int pciehp_configure_device(struct slot *p_slot)
>> (dev->hdr_type ==
>> PCI_HEADER_TYPE_CARDBUS)) { pciehp_add_bridge(dev);
>> }
>> + pci_dev_put(dev);
>> + }
>> +
>> + pci_assign_unassigned_bridge_resources(bridge);
>> +
>> + for (fn = 0; fn < 8; fn++) {
>> + dev = pci_get_slot(parent, PCI_DEVFN(0, fn));
>> + if (!dev)
>> + continue;
>> + if ((dev->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
>> + pci_dev_put(dev);
>> + continue;
>> + }
>> pci_configure_slot(dev);
>> pci_dev_put(dev);
>> }
>>
>> - pci_bus_assign_resources(parent);
>> pci_bus_add_devices(parent);
>> +
>> return 0;
>> }
>
> This seems like a nice cleanup, can you rebase on the merged patches
> from 9/14 (including the master bit change Kenji-san wanted)?
that share some functions from 0 - 6...
YH
next prev parent reply other threads:[~2010-01-15 21:15 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-22 23:02 [PATCH 00/14] pci: update pci bridge resources Yinghai Lu
2009-12-22 23:02 ` [PATCH 01/14] pci: separate pci_setup_bridge to small functions Yinghai Lu
2010-01-15 18:54 ` Jesse Barnes
2009-12-22 23:02 ` [PATCH 02/14] resource: add release_child_resources Yinghai Lu
2010-01-15 18:54 ` Jesse Barnes
2009-12-22 23:02 ` [PATCH 03/14] pci: add pci_bridge_release_unused_res and pci_bus_release_unused_bridge_res Yinghai Lu
2010-01-15 18:53 ` Jesse Barnes
2010-01-16 0:20 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 04/14] pci: don't dump it when bus resource flags is not used Yinghai Lu
2010-01-15 18:54 ` Jesse Barnes
2009-12-22 23:02 ` [PATCH 05/14] pci: add failed_list to record failed one for pci_bus_assign_resources Yinghai Lu
2010-01-15 18:56 ` Jesse Barnes
2010-01-15 21:13 ` Yinghai Lu
2010-01-15 21:41 ` Bjorn Helgaas
2009-12-22 23:02 ` [PATCH 06/14] pci: reject mmio range start from 0 on pci_bridge read Yinghai Lu
2010-01-15 19:19 ` Jesse Barnes
2010-01-15 21:15 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 07/14] pci: don't shrink bridge resources Yinghai Lu
2010-01-15 19:04 ` Jesse Barnes
2010-01-15 21:09 ` Yinghai Lu
2010-01-15 21:31 ` Jesse Barnes
2010-01-16 0:32 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 08/14] pci: update bridge res to get more big range in pci assign unssign Yinghai Lu
2010-01-15 19:12 ` Jesse Barnes
2010-01-15 21:12 ` Yinghai Lu
2010-01-15 21:34 ` Bjorn Helgaas
2010-01-15 21:34 ` Jesse Barnes
2009-12-22 23:02 ` [PATCH 09/14] pci: introduce pci_assign_unassigned_bridge_resources Yinghai Lu
2010-01-13 0:50 ` Kenji Kaneshige
2010-01-13 1:58 ` Yinghai Lu
2010-01-13 7:31 ` Kenji Kaneshige
2010-01-13 7:52 ` Yinghai Lu
2009-12-22 23:02 ` [PATCH 10/14] pci: pciehp clean flow in pciehp_configure_device Yinghai Lu
2010-01-15 19:14 ` Jesse Barnes
2010-01-15 21:14 ` Yinghai Lu [this message]
2009-12-22 23:02 ` [PATCH 11/14] pci: pciehp second try to get big range for pcie devices Yinghai Lu
2009-12-22 23:02 ` [PATCH 12/14] pci: pci_bridge_release_res Yinghai Lu
2009-12-22 23:02 ` [PATCH 13/14] pciehp: add support for bridge resource reallocation Yinghai Lu
2009-12-22 23:02 ` [PATCH 14/14] pci: set PCI_PREF_RANGE_TYPE_64 in pci_bridge_check_ranges Yinghai Lu
2010-01-08 21:33 ` [PATCH 00/14] pci: update pci bridge resources Patrick Keller
2010-01-11 21:57 ` Patrick Keller
2010-01-12 18:18 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B50DAB7.80209@kernel.org \
--to=yinghai@kernel.org \
--cc=achiang@hp.com \
--cc=bjorn.helgaas@hp.com \
--cc=ink@jurassic.park.msu.ru \
--cc=jbarnes@virtuousgeek.org \
--cc=kaneshige.kenji@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox