Re: [PATCH 07/14] pci: don't shrink bridge resources

[Yinghai Lu <yinghai@kernel.org>]

On 01/15/2010 01:31 PM, Jesse Barnes wrote:
> On Fri, 15 Jan 2010 13:09:31 -0800
> Yinghai Lu <yinghai@kernel.org> wrote:
> 
>> On 01/15/2010 11:04 AM, Jesse Barnes wrote:
>>> On Tue, 22 Dec 2009 15:02:27 -0800
>>> Yinghai Lu <yinghai@kernel.org> wrote:
>>>
>>>> when we are clearing leaf bridge resource and try to get big one,
>>>> we could shrink the bridge if there is no resource under it.
>>>>
>>>> let check with old resource size and make sure we are trying to get
>>>> big one.
>>>>
>>>> -v2: keep disable window print out, still could happen on non pci
>>>> hotplug system
>>>>
>>>> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
>>>> ---
>>>>  drivers/pci/setup-bus.c |   14 ++++++++++++--
>>>>  1 files changed, 12 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
>>>> index 9bb4435..d53b42e 100644
>>>> --- a/drivers/pci/setup-bus.c
>>>> +++ b/drivers/pci/setup-bus.c
>>>> @@ -387,7 +387,7 @@ static void pbus_size_io(struct pci_bus *bus,
>>>> resource_size_t min_size) {
>>>>  	struct pci_dev *dev;
>>>>  	struct resource *b_res = find_free_bus_resource(bus,
>>>> IORESOURCE_IO);
>>>> -	unsigned long size = 0, size1 = 0;
>>>> +	unsigned long size = 0, size1 = 0, old_size;
>>>>  
>>>>  	if (!b_res)
>>>>   		return;
>>>> @@ -412,12 +412,17 @@ static void pbus_size_io(struct pci_bus *bus,
>>>> resource_size_t min_size) }
>>>>  	if (size < min_size)
>>>>  		size = min_size;
>>>> +	old_size = resource_size(b_res);
>>>> +	if (old_size == 1)
>>>> +		old_size = 0;
>>>
>>> Do we even need these == 1 checks?  If old_size really was 1, it
>>> means we had a very small decode range.  Might make more sense to
>>> do...
>>
>> when start=0 and end =0, will get old_size = 1
> 
> ...
> if (old_size == 1)
>   old_size = 0
> ...
> if (size < old_size)
>   size = old_size
> ...
> 
> 
> If old_size > 1 we'll make sure size doesn't decrease.
> 
> If old_size == 1, we'll never touch the changed size because size < 0
> will never be true for size (unsigned).
> 
> However, if old_size == 1 and we left it at 1, we'd only set size =
> old_size if size was 0, which is why I suggested the size check.
> 

but:
for
if (size && size < old_size)

if the new one will 0 ( no device under it and it is not hotplug supported <so min_size = 0> )
then we will overwrite the real old size...during second try.

YH