[PATCH] doc: document IPv6 parameters

[PATCH] doc: document IPv6 parameters

[Brian Haley]

Update documentation to describe IPv6 parameters.
Reported by <greg@enjellic.com>.

Signed-off-by: Brian Haley <brian.haley@hp.com>
---

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 736d456..3ca7f8f 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -54,6 +54,7 @@ parameter is applicable:
 	IMA     Integrity measurement architecture is enabled.
 	IOSCHED	More than one I/O scheduler is enabled.
 	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
+	IPV6	IPv6 support is enabled.
 	ISAPNP	ISA PnP code is enabled.
 	ISDN	Appropriate ISDN support is enabled.
 	JOY	Appropriate joystick support is enabled.
@@ -347,6 +348,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			Change the amount of debugging information output
 			when initialising the APIC and IO-APIC components.
 
+	autoconf=	[IPV6]
+			See Documentation/networking/ipv6.txt.
+
 	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
 			Limit apic dumping. The parameter defines the maximal
 			number of local apics being dumped. Also it is possible
@@ -629,6 +633,12 @@ and is between 256 and 4096 characters. It is defined in the file
 			See drivers/char/README.epca and
 			Documentation/serial/digiepca.txt.
 
+	disable=	[IPV6]
+			See Documentation/networking/ipv6.txt.
+
+	disable_ipv6=	[IPV6]
+			See Documentation/networking/ipv6.txt.
+
 	disable_mtrr_cleanup [X86]
 			The kernel tries to adjust MTRR layout from continuous
 			to discrete, to make X server driver able to add WB

Re: [PATCH] doc: document IPv6 parameters

[Brian Haley]

Hi Randy,

Brian Haley wrote:
> Update documentation to describe IPv6 parameters.
> Reported by <greg@enjellic.com>.

I hadn't received any ACK/NACK from linux-doc, just seeing if this is
still in your queue.

Thanks,

-Brian


> Signed-off-by: Brian Haley <brian.haley@hp.com>
> ---
> 
> diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
> index 736d456..3ca7f8f 100644
> --- a/Documentation/kernel-parameters.txt
> +++ b/Documentation/kernel-parameters.txt
> @@ -54,6 +54,7 @@ parameter is applicable:
>  	IMA     Integrity measurement architecture is enabled.
>  	IOSCHED	More than one I/O scheduler is enabled.
>  	IP_PNP	IP DHCP, BOOTP, or RARP is enabled.
> +	IPV6	IPv6 support is enabled.
>  	ISAPNP	ISA PnP code is enabled.
>  	ISDN	Appropriate ISDN support is enabled.
>  	JOY	Appropriate joystick support is enabled.
> @@ -347,6 +348,9 @@ and is between 256 and 4096 characters. It is defined in the file
>  			Change the amount of debugging information output
>  			when initialising the APIC and IO-APIC components.
>  
> +	autoconf=	[IPV6]
> +			See Documentation/networking/ipv6.txt.
> +
>  	show_lapic=	[APIC,X86] Advanced Programmable Interrupt Controller
>  			Limit apic dumping. The parameter defines the maximal
>  			number of local apics being dumped. Also it is possible
> @@ -629,6 +633,12 @@ and is between 256 and 4096 characters. It is defined in the file
>  			See drivers/char/README.epca and
>  			Documentation/serial/digiepca.txt.
>  
> +	disable=	[IPV6]
> +			See Documentation/networking/ipv6.txt.
> +
> +	disable_ipv6=	[IPV6]
> +			See Documentation/networking/ipv6.txt.
> +
>  	disable_mtrr_cleanup [X86]
>  			The kernel tries to adjust MTRR layout from continuous
>  			to discrete, to make X server driver able to add WB
>