* 2.6.33-rc7 problems
@ 2010-02-09 22:06 ST
2010-02-10 23:40 ` 2.6.33-rc7 problems usb CF ST
2010-02-11 0:52 ` 2.6.33-rc7 problems Robert Hancock
0 siblings, 2 replies; 9+ messages in thread
From: ST @ 2010-02-09 22:06 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: Text/Plain, Size: 2044 bytes --]
Hi
I am currently running the linus main git tree with the last commit beeing:
deb0c98c7f6035d47a247e548384517a955314a5 (2.6.33-rc7)
USB Cardreader:
Since i am now in my third attempt to get my usb flashreader going under this
kernel (damn this must be simple right?). I have my doubts if this is probably
not a .config but a kernel problem. If i plug in the usb card reader i get the
output as attached in the file "usb_problems". The .config will be also
attached. So i thought "ok, no problem i messed up", what about the defconfig.
(arch/x86/configs/x86_64_defconfig).
The defconfig works slightly better by omitting the repeating thread
awake/thread sleeping output but no device is found usable. The distribution
is Debian/Sid. The hardware is working with the standard Debian kernel 2.6.30.
I had a similar error when i had an typo in the default codepage "utf-8" vs.
"utf8". But this error is fixed now and USB Sticks are working fine.
Firmware loading:
Firmware loading seems to hang this machine. It can be worked arround by
embedding the firmware for the device (radeon onboard gfx) into the kernel
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="radeon/R600_rlc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
The microcode firmware loading also hangs for quite some time.
Disk access:
This is the most annoying: When dooing a md raid 1 level resync the machine
is barely usable. I haven't testet it with the current configuration but even
when "update-grub" from grub2 is called the slowdown is really still there.
There is a file attached "timeouts" which give a output of such a scenario.
And boy 120s starvation is quite bad, right? Besides it doesn't seem fair to
me either.
I am happy to test any patches you throw at me. Any hints tips are also very
welcome.
Thanks
ST
PS: This is whitebox hw with a ASUS M4A78T-E Mainboard and 8 Gigs of ECC
Memory and two SAMSUNG HD103SI in MD Raid 1 configuration.
PPS: Please CC as im am not subscribed on the list.
[-- Attachment #2: usb_problems.txt --]
[-- Type: text/plain, Size: 59573 bytes --]
Feb 9 22:38:38 localhost kernel: hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0008
Feb 9 22:38:38 localhost kernel: hub 1-4:1.0: port 3, status 0101, change 0001, 12 Mb/s
Feb 9 22:38:38 localhost kernel: hub 1-4:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
Feb 9 22:38:38 localhost kernel: hub 1-4:1.0: port 3 not reset yet, waiting 10ms
Feb 9 22:38:38 localhost kernel: usb 1-4.3: new high speed USB device using ehci_hcd and address 6
Feb 9 22:38:38 localhost kernel: hub 1-4:1.0: port 3 not reset yet, waiting 10ms
Feb 9 22:38:38 localhost kernel: usb 1-4.3: skipped 1 descriptor after interface
Feb 9 22:38:38 localhost kernel: usb 1-4.3: default language 0x0409
Feb 9 22:38:38 localhost kernel: usb 1-4.3: udev 6, busnum 1, minor = 5
Feb 9 22:38:38 localhost kernel: usb 1-4.3: New USB device found, idVendor=058f, idProduct=6364
Feb 9 22:38:38 localhost kernel: usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 9 22:38:38 localhost kernel: usb 1-4.3: Product: Mass Storage Device
Feb 9 22:38:38 localhost kernel: usb 1-4.3: Manufacturer: Generic
Feb 9 22:38:38 localhost kernel: usb 1-4.3: SerialNumber: 058F63646476
Feb 9 22:38:38 localhost kernel: usb 1-4.3: uevent
Feb 9 22:38:38 localhost kernel: usb 1-4.3: usb_probe_device
Feb 9 22:38:38 localhost kernel: usb 1-4.3: configuration #1 chosen from 1 choice
Feb 9 22:38:38 localhost kernel: usb 1-4.3: adding 1-4.3:1.0 (config #1, interface 0)
Feb 9 22:38:38 localhost kernel: usb 1-4.3:1.0: uevent
Feb 9 22:38:38 localhost kernel: usb 1-4.3: adding 1-4.3:1.1 (config #1, interface 1)
Feb 9 22:38:38 localhost kernel: usb 1-4.3:1.1: uevent
Feb 9 22:38:38 localhost kernel: usbhid 1-4.3:1.1: usb_probe_interface
Feb 9 22:38:38 localhost kernel: usbhid 1-4.3:1.1: usb_probe_interface - got id
Feb 9 22:38:38 localhost kernel: generic-usb: probe of 0003:058F:6364.0003 failed with error -22
Feb 9 22:38:38 localhost kernel: drivers/usb/core/inode.c: creating file '006'
Feb 9 22:38:38 localhost kernel: hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0008
Feb 9 22:38:38 localhost kernel: usb 1-4.3: uevent
Feb 9 22:38:38 localhost kernel: Initializing USB Mass Storage driver...
Feb 9 22:38:38 localhost kernel: usb-storage 1-4.3:1.0: usb_probe_interface
Feb 9 22:38:38 localhost kernel: usb-storage 1-4.3:1.0: usb_probe_interface - got id
Feb 9 22:38:38 localhost kernel: usb-storage: USB Mass Storage device detected
Feb 9 22:38:38 localhost kernel: usb-storage: -- associate_dev
Feb 9 22:38:38 localhost kernel: usb-storage: Vendor: 0x058f, Product: 0x6364, Revision: 0x0100
Feb 9 22:38:38 localhost kernel: usb-storage: Interface Subclass: 0x06, Protocol: 0x50
Feb 9 22:38:38 localhost kernel: usb-storage: Transport: Bulk
Feb 9 22:38:38 localhost kernel: usb-storage: Protocol: Transparent SCSI
Feb 9 22:38:38 localhost kernel: scsi8 : usb-storage 1-4.3:1.0
Feb 9 22:38:38 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:38 localhost kernel: usb-storage 1-4.3:1.0: device found
Feb 9 22:38:38 localhost kernel: usb-storage 1-4.3:1.0: waiting for device to settle before scanning
Feb 9 22:38:38 localhost kernel: usbcore: registered new interface driver usb-storage
Feb 9 22:38:38 localhost kernel: USB Mass Storage support registered.
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1
Feb 9 22:38:43 localhost kernel: usb-storage: GetMaxLUN command result is 1, data is 3
Feb 9 22:38:43 localhost kernel: usb-storage 1-4.3:1.0: scan complete
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command INQUIRY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 12 00 00 00 24 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 36 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 36/36
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x1 R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x0
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Bad target number (1:0)
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x40000
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Bad target number (2:0)
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x40000
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Bad target number (3:0)
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x40000
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Bad target number (4:0)
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x40000
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Bad target number (5:0)
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x40000
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Bad target number (6:0)
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x40000
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Bad target number (7:0)
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x40000
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x2 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: sd 8:0:0:0: Attached scsi generic sg3 type 0
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x2 R 0 Stat 0x1
Feb 9 22:38:43 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:43 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x3 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x3 R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:43 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x4 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x4 R 0 Stat 0x1
Feb 9 22:38:43 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:43 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x5 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x5 R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:43 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: sd 8:0:0:0: [sdc] Attached SCSI removable disk
Feb 9 22:38:43 localhost kernel: usb 1-4.3:1.0: uevent
Feb 9 22:38:43 localhost kernel: usb 1-4.3: uevent
Feb 9 22:38:43 localhost kernel: usb 1-4.3:1.0: uevent
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x6 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x6 R 0 Stat 0x1
Feb 9 22:38:43 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:43 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x7 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x7 R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:43 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x8 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x8 R 0 Stat 0x1
Feb 9 22:38:43 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:43 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x9 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x9 R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:43 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0xa L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0xa R 0 Stat 0x1
Feb 9 22:38:43 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:43 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0xb L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0xb R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:43 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0xc L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0xc R 0 Stat 0x1
Feb 9 22:38:43 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:43 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0xd L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0xd R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:43 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0xe L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0xe R 0 Stat 0x1
Feb 9 22:38:43 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:43 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0xf L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0xf R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:43 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:43 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:43 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:43 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x10 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x1
Feb 9 22:38:43 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:43 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x11 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:43 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:43 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:43 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:43 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:43 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:43 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:43 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:43 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x12 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x13 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x14 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x15 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x16 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x16 R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x17 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x17 R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x18 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x18 R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x19 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x19 R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 1e 00 00 00 01 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x1a L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x1a R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x1b L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x1b R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x5, ASC: 0x26, ASCQ: 0x2
Feb 9 22:38:46 localhost kernel: usb-storage: Illegal Request: Parameter value invalid
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x1c L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x1c R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x1d L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x1d R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x1e L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x1e R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x1f L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x1f R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x20 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x20 R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x21 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x21 R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: usb-storage: queuecommand called
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: Command TEST_UNIT_READY (6 bytes)
Feb 9 22:38:46 localhost kernel: usb-storage: 00 00 00 00 00 00
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x22 L 0 F 0 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x22 R 0 Stat 0x1
Feb 9 22:38:46 localhost kernel: usb-storage: -- transport indicates command failure
Feb 9 22:38:46 localhost kernel: usb-storage: Issuing auto-REQUEST_SENSE
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Command S 0x43425355 T 0x23 L 18 F 128 Trg 0 LUN 0 CL 6
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 31/31
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk command transfer result=0
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 18 bytes, 1 entries
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 18/18
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk data transfer result 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Attempting to get CSW...
Feb 9 22:38:46 localhost kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
Feb 9 22:38:46 localhost kernel: usb-storage: Status code 0; transferred 13/13
Feb 9 22:38:46 localhost kernel: usb-storage: -- transfer complete
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk status result = 0
Feb 9 22:38:46 localhost kernel: usb-storage: Bulk Status S 0x53425355 T 0x23 R 0 Stat 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: -- Result from auto-sense is 0
Feb 9 22:38:46 localhost kernel: usb-storage: -- code: 0xf0, key: 0x2, ASC: 0x3a, ASCQ: 0x0
Feb 9 22:38:46 localhost kernel: usb-storage: Not Ready: Medium not present
Feb 9 22:38:46 localhost kernel: usb-storage: scsi cmd done, result=0x2
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread sleeping.
Feb 9 22:38:46 localhost kernel: hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0008
Feb 9 22:38:46 localhost kernel: hub 1-4:1.0: port 3, status 0100, change 0001, 12 Mb/s
Feb 9 22:38:46 localhost kernel: usb 1-4.3: USB disconnect, address 6
Feb 9 22:38:46 localhost kernel: usb 1-4.3: unregistering device
Feb 9 22:38:46 localhost kernel: usb 1-4.3: usb_disable_device nuking all URBs
Feb 9 22:38:46 localhost kernel: usb 1-4.3: unregistering interface 1-4.3:1.0
Feb 9 22:38:46 localhost kernel: usb-storage: storage_disconnect() called
Feb 9 22:38:46 localhost kernel: usb-storage: -- usb_stor_release_resources
Feb 9 22:38:46 localhost kernel: usb-storage: -- sending exit command to thread
Feb 9 22:38:46 localhost kernel: usb-storage: *** thread awakened.
Feb 9 22:38:46 localhost kernel: usb-storage: -- exiting
Feb 9 22:38:46 localhost kernel: usb-storage: -- dissociate_dev
Feb 9 22:38:46 localhost kernel: usb 1-4.3:1.0: uevent
Feb 9 22:38:46 localhost kernel: usb 1-4.3: unregistering interface 1-4.3:1.1
Feb 9 22:38:46 localhost kernel: usb 1-4.3:1.1: uevent
Feb 9 22:38:46 localhost kernel: usb 1-4.3: uevent
Feb 9 22:38:46 localhost kernel: hub 1-4:1.0: debounce: port 3: total 100ms stable 100ms status 0x100
Feb 9 22:39:01 localhost /USR/SBIN/CRON[3684]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -type f -cmin +$(/usr/lib/php5/maxlifetime) -print0 | xargs -n 200 -r -0 rm)
[-- Attachment #3: timeouts --]
[-- Type: text/plain, Size: 59849 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.30-1-amd64 (Debian 2.6.30-6) (waldi@debian.org) (gcc version 4.3.4 (Debian 4.3.4-1) ) #1 SMP Sat Aug 15 18:09:19 UTC 2009
[ 0.000000] Command line: root=/dev/sda4 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe90000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe90000 - 00000000bfea8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfea8000 - 00000000bfed0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfed0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x100000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000230000000 aka 8960M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfe90 max_arch_pfn = 0x100000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfe90000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfe90000 page 4k
[ 0.000000] kernel direct mapping tables up to bfe90000 @ 10000-13000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] 0100000000 - 0200000000 page 1G
[ 0.000000] 0200000000 - 0230000000 page 2M
[ 0.000000] kernel direct mapping tables up to 230000000 @ 12000-14000
[ 0.000000] RAMDISK: 37886000 - 37fef11b
[ 0.000000] ACPI: RSDP 00000000000fb8b0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000bfe90100 00054 (v01 060509 XSDT1006 20090605 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000bfe90290 000F4 (v03 060509 FACP1006 20090605 MSFT 00000097)
[ 0.000000] ACPI Warning (tbfadt-0562): Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 [20090320]
[ 0.000000] ACPI: DSDT 00000000bfe90440 0E6E4 (v01 A1152 A1152000 00000000 INTL 20060113)
[ 0.000000] ACPI: FACS 00000000bfea8000 00040
[ 0.000000] ACPI: APIC 00000000bfe90390 0006C (v01 060509 APIC1006 20090605 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000bfe90400 0003C (v01 060509 OEMMCFG 20090605 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000bfea8040 00072 (v01 060509 OEMB1006 20090605 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000bfe9f440 00038 (v01 060509 OEMHPET 20090605 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000bfe9f480 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000230000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000230000000
[ 0.000000] NODE_DATA [0000000000013000 - 000000000001afff]
[ 0.000000] bootmap [000000000001b000 - 0000000000060fff] pages 46
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0230000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 00007dd8cc] TEXT DATA BSS ==> [0000200000 - 00007dd8cc]
[ 0.000000] #3 [0037886000 - 0037fef11b] RAMDISK ==> [0037886000 - 0037fef11b]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00007de000 - 00007de290] BRK ==> [00007de000 - 00007de290]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] [ffffe20000000000-ffffe20007bfffff] PMD -> [ffff880028200000-ffff88002effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00230000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bfe90
[ 0.000000] 0: 0x00100000 -> 0x00230000
[ 0.000000] On node 0 totalpages: 2031135
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1603 pages reserved
[ 0.000000] DMA zone: 2324 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767688 pages, LIFO batch:31
[ 0.000000] Normal zone: 17024 pages used for memmap
[ 0.000000] Normal zone: 1228160 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfe90000 - 00000000bfea8000
[ 0.000000] PM: Registered nosave memory: 00000000bfea8000 - 00000000bfed0000
[ 0.000000] PM: Registered nosave memory: 00000000bfed0000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: bff00000:40000000)
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages at ffff880028034000, static data 76256 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1998172
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda4 ro quiet
[ 0.000000] Initializing CPU#0
[ 0.000000] Experimental hierarchical RCU implementation.
[ 0.000000] Experimental hierarchical RCU init done.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3211.077 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Checking aperture...
[ 0.004000] No AGP bridge found
[ 0.004000] Node 0: aperture @ 4000000 size 32 MB
[ 0.004000] Aperture pointing to e820 RAM. Ignoring.
[ 0.004000] Your BIOS doesn't leave a aperture memory hole
[ 0.004000] Please enable the IOMMU option in the BIOS setup
[ 0.004000] This costs you 64 MB of RAM
[ 0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.004000] Memory: 7932016k/9175040k available (2784k kernel code, 1050500k absent, 192524k reserved, 1415k data, 560k init)
[ 0.004000] hpet clockevent registered
[ 0.004000] alloc irq_desc for 24 on cpu 0 node 0
[ 0.004000] alloc kstat_irqs on cpu 0 node 0
[ 0.004000] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 6422.14 BogoMIPS (lpj=12844292)
[ 0.004054] Security Framework initialized
[ 0.004057] SELinux: Disabled at boot.
[ 0.004509] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.006513] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.007391] Mount-cache hash table entries: 256
[ 0.007474] Initializing cgroup subsys ns
[ 0.007477] Initializing cgroup subsys cpuacct
[ 0.007479] Initializing cgroup subsys devices
[ 0.007481] Initializing cgroup subsys freezer
[ 0.007482] Initializing cgroup subsys net_cls
[ 0.007498] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.007499] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.007500] CPU 0/0x0 -> Node 0
[ 0.007502] tseg: 0000000000
[ 0.007512] CPU: Physical Processor ID: 0
[ 0.007512] CPU: Processor Core ID: 0
[ 0.007518] using C1E aware idle routine
[ 0.008057] ACPI: Core revision 20090320
[ 0.024039] Setting APIC routing to flat
[ 0.024327] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.064881] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 6421.93 BogoMIPS (lpj=12843864)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1/0x1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.152863] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.152869] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156014] System has AMD C1E enabled
[ 0.156024] Switch to broadcast mode on CPU1
[ 0.156060] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.004000] Initializing CPU#2
[ 0.004000] Calibrating delay using timer specific routine.. 6421.92 BogoMIPS (lpj=12843840)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 2/0x2 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 2
[ 0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.244799] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.244804] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.248017] Switch to broadcast mode on CPU2
[ 0.248064] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.004000] Initializing CPU#3
[ 0.004000] Calibrating delay using timer specific routine.. 6421.88 BogoMIPS (lpj=12843762)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 3/0x3 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 3
[ 0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[ 0.336816] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.336820] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340020] Brought up 4 CPUs
[ 0.340022] Total of 4 processors activated (25687.87 BogoMIPS).
[ 0.340019] Switch to broadcast mode on CPU3
[ 0.340073] CPU0 attaching sched-domain:
[ 0.340075] domain 0: span 0-3 level MC
[ 0.340077] groups: 0 1 2 3
[ 0.340081] CPU1 attaching sched-domain:
[ 0.340082] domain 0: span 0-3 level MC
[ 0.340083] groups: 1 2 3 0
[ 0.340087] CPU2 attaching sched-domain:
[ 0.340088] domain 0: span 0-3 level MC
[ 0.340089] groups: 2 3 0 1
[ 0.340092] CPU3 attaching sched-domain:
[ 0.340093] domain 0: span 0-3 level MC
[ 0.340094] groups: 3 0 1 2
[ 0.340147] Switch to broadcast mode on CPU0
[ 0.340147] net_namespace: 1936 bytes
[ 0.340147] Booting paravirtualized kernel on bare hardware
[ 0.340147] regulator: core version 0.5
[ 0.340147] NET: Registered protocol family 16
[ 0.340147] node 0 link 0: io port [1000, ffffff]
[ 0.340147] TOM: 00000000d0000000 aka 3328M
[ 0.340147] Fam 10h mmconf [e0000000, efffffff]
[ 0.340147] node 0 link 0: mmio [a0000, bffff]
[ 0.340147] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
[ 0.340147] node 0 link 0: mmio [f0000000, fbcfffff]
[ 0.340147] node 0 link 0: mmio [fbd00000, fbefffff]
[ 0.340147] node 0 link 0: mmio [fbf00000, ffefffff]
[ 0.340147] TOM2: 0000000230000000 aka 8960M
[ 0.340147] bus: [00,07] on node 0 link 0
[ 0.340147] bus: 00 index 0 io port: [0, ffff]
[ 0.340147] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.340147] bus: 00 index 2 mmio: [d0000000, dfffffff]
[ 0.340147] bus: 00 index 3 mmio: [f0000000, ffffffff]
[ 0.340147] bus: 00 index 4 mmio: [230000000, fcffffffff]
[ 0.340147] ACPI: bus type pci registered
[ 0.340147] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.340147] PCI: Not using MMCONFIG.
[ 0.340147] PCI: Using configuration type 1 for base access
[ 0.340147] PCI: Using configuration type 1 for extended access
[ 0.340147] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.340147] mtrr: probably your BIOS does not setup all CPUs.
[ 0.340147] mtrr: corrected configuration.
[ 0.340147] bio: create slab <bio-0> at 0
[ 0.340451] ACPI: EC: Look up EC in DSDT
[ 0.431345] ACPI: Interpreter enabled
[ 0.431348] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.431368] ACPI: Using IOAPIC for interrupt routing
[ 0.431421] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.436846] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.442943] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.449672] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 05, should be FC [20090320]
[ 0.449672] ACPI: No dock devices found.
[ 0.449672] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.449672] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.449672] pci 0000:00:06.0: PME# disabled
[ 0.449672] pci 0000:00:11.0: reg 10 io port: [0xc000-0xc007]
[ 0.449672] pci 0000:00:11.0: reg 14 io port: [0xb000-0xb003]
[ 0.449672] pci 0000:00:11.0: reg 18 io port: [0xa000-0xa007]
[ 0.449672] pci 0000:00:11.0: reg 1c io port: [0x9000-0x9003]
[ 0.449672] pci 0000:00:11.0: reg 20 io port: [0x8000-0x800f]
[ 0.449672] pci 0000:00:11.0: reg 24 32bit mmio: [0xfbcffc00-0xfbcfffff]
[ 0.449672] pci 0000:00:12.0: reg 10 32bit mmio: [0xfbcfd000-0xfbcfdfff]
[ 0.449672] pci 0000:00:12.1: reg 10 32bit mmio: [0xfbcfe000-0xfbcfefff]
[ 0.449672] pci 0000:00:12.2: reg 10 32bit mmio: [0xfbcff800-0xfbcff8ff]
[ 0.449672] pci 0000:00:12.2: supports D1 D2
[ 0.449672] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.449672] pci 0000:00:12.2: PME# disabled
[ 0.452023] pci 0000:00:13.0: reg 10 32bit mmio: [0xfbcfb000-0xfbcfbfff]
[ 0.452070] pci 0000:00:13.1: reg 10 32bit mmio: [0xfbcfc000-0xfbcfcfff]
[ 0.452133] pci 0000:00:13.2: reg 10 32bit mmio: [0xfbcff400-0xfbcff4ff]
[ 0.452179] pci 0000:00:13.2: supports D1 D2
[ 0.452180] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.452183] pci 0000:00:13.2: PME# disabled
[ 0.452284] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.452290] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.452295] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.452301] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.452306] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.452363] pci 0000:00:14.2: reg 10 64bit mmio: [0xfbcf4000-0xfbcf7fff]
[ 0.452400] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.452403] pci 0000:00:14.2: PME# disabled
[ 0.452495] pci 0000:00:14.5: reg 10 32bit mmio: [0xfbcfa000-0xfbcfafff]
[ 0.452599] pci 0000:01:05.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[ 0.452602] pci 0000:01:05.0: reg 14 io port: [0xd000-0xd0ff]
[ 0.452604] pci 0000:01:05.0: reg 18 32bit mmio: [0xfbee0000-0xfbeeffff]
[ 0.452609] pci 0000:01:05.0: reg 24 32bit mmio: [0xfbd00000-0xfbdfffff]
[ 0.452618] pci 0000:01:05.0: supports D1 D2
[ 0.452631] pci 0000:01:05.1: reg 10 32bit mmio: [0xfbefc000-0xfbefffff]
[ 0.452645] pci 0000:01:05.1: supports D1 D2
[ 0.452679] pci 0000:00:01.0: bridge io port: [0xd000-0xdfff]
[ 0.452681] pci 0000:00:01.0: bridge 32bit mmio: [0xfbd00000-0xfbefffff]
[ 0.452684] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.452725] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
[ 0.452731] pci 0000:02:00.0: reg 18 io port: [0xec00-0xec7f]
[ 0.452775] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.452778] pci 0000:02:00.0: PME# disabled
[ 0.452828] pci 0000:00:06.0: bridge io port: [0xe000-0xefff]
[ 0.452829] pci 0000:00:06.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.452882] pci 0000:00:14.4: transparent bridge
[ 0.452901] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.453083] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.453143] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.453209] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.456134] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
[ 0.456206] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.456319] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
[ 0.456432] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15)
[ 0.456545] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.456658] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.456771] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
[ 0.456884] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.456930] usbcore: registered new interface driver usbfs
[ 0.456930] usbcore: registered new interface driver hub
[ 0.456930] usbcore: registered new device driver usb
[ 0.456930] PCI: Using ACPI for IRQ routing
[ 0.472074] PCI-DMA: Disabling AGP.
[ 0.472122] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.472122] PCI-DMA: using GART IOMMU.
[ 0.472122] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.473764] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 0
[ 0.473769] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.480021] hpet: hpet2 irq 24 for MSI
[ 0.503988] Switched to high resolution mode on CPU 3
[ 0.503992] Switched to high resolution mode on CPU 1
[ 0.503996] Switched to high resolution mode on CPU 2
[ 0.504012] Switched to high resolution mode on CPU 0
[ 0.508252] pnp: PnP ACPI init
[ 0.508267] ACPI: bus type pnp registered
[ 0.513014] pnp: PnP ACPI: found 15 devices
[ 0.513015] ACPI: ACPI bus type pnp unregistered
[ 0.513022] system 00:01: iomem range 0xc0000000-0xcfffffff has been reserved
[ 0.513027] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.513029] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.513033] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.513035] system 00:08: ioport range 0x40b-0x40b has been reserved
[ 0.513036] system 00:08: ioport range 0x4d6-0x4d6 has been reserved
[ 0.513038] system 00:08: ioport range 0xc00-0xc01 has been reserved
[ 0.513040] system 00:08: ioport range 0xc14-0xc14 has been reserved
[ 0.513041] system 00:08: ioport range 0xc50-0xc51 has been reserved
[ 0.513043] system 00:08: ioport range 0xc52-0xc52 has been reserved
[ 0.513045] system 00:08: ioport range 0xc6c-0xc6c has been reserved
[ 0.513046] system 00:08: ioport range 0xc6f-0xc6f has been reserved
[ 0.513048] system 00:08: ioport range 0xcd0-0xcd1 has been reserved
[ 0.513050] system 00:08: ioport range 0xcd2-0xcd3 has been reserved
[ 0.513052] system 00:08: ioport range 0xcd4-0xcd5 has been reserved
[ 0.513053] system 00:08: ioport range 0xcd6-0xcd7 has been reserved
[ 0.513055] system 00:08: ioport range 0xcd8-0xcdf has been reserved
[ 0.513057] system 00:08: ioport range 0xb00-0xb3f has been reserved
[ 0.513058] system 00:08: ioport range 0x800-0x89f has been reserved
[ 0.513060] system 00:08: ioport range 0xb00-0xb0f has been reserved
[ 0.513062] system 00:08: ioport range 0xb20-0xb3f has been reserved
[ 0.513064] system 00:08: ioport range 0x900-0x90f has been reserved
[ 0.513065] system 00:08: ioport range 0x910-0x91f has been reserved
[ 0.513067] system 00:08: ioport range 0xfe00-0xfefe has been reserved
[ 0.513069] system 00:08: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.513071] system 00:08: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.513075] system 00:0c: ioport range 0x230-0x23f has been reserved
[ 0.513077] system 00:0c: ioport range 0x290-0x29f has been reserved
[ 0.513078] system 00:0c: ioport range 0xf40-0xf4f has been reserved
[ 0.513080] system 00:0c: ioport range 0xa30-0xa3f has been reserved
[ 0.513083] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.513086] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.513088] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.513090] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.513092] system 00:0e: iomem range 0x100000-0xbfefffff could not be reserved
[ 0.513094] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.517976] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.517978] pci 0000:00:01.0: IO window: 0xd000-0xdfff
[ 0.517980] pci 0000:00:01.0: MEM window: 0xfbd00000-0xfbefffff
[ 0.517982] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.517985] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 0.517986] pci 0000:00:06.0: IO window: 0xe000-0xefff
[ 0.517988] pci 0000:00:06.0: MEM window: 0xfbf00000-0xfbffffff
[ 0.517990] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.517993] pci 0000:00:14.4: PCI bridge, secondary bus 0000:03
[ 0.517994] pci 0000:00:14.4: IO window: disabled
[ 0.517998] pci 0000:00:14.4: MEM window: disabled
[ 0.518001] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.518011] alloc irq_desc for 18 on cpu 0 node 0
[ 0.518013] alloc kstat_irqs on cpu 0 node 0
[ 0.518016] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.518018] pci 0000:00:06.0: setting latency timer to 64
[ 0.518024] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.518026] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.518027] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff]
[ 0.518029] pci_bus 0000:01: resource 1 mem: [0xfbd00000-0xfbefffff]
[ 0.518030] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.518032] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
[ 0.518033] pci_bus 0000:02: resource 1 mem: [0xfbf00000-0xfbffffff]
[ 0.518035] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.518037] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.518108] NET: Registered protocol family 2
[ 0.576402] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.577314] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.579100] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.579328] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.579329] TCP reno registered
[ 0.608323] NET: Registered protocol family 1
[ 0.608359] Trying to unpack rootfs image as initramfs...
[ 0.717788] Freeing initrd memory: 7588k freed
[ 0.720648] audit: initializing netlink socket (disabled)
[ 0.720659] type=2000 audit(1252659046.720:1): initialized
[ 0.721097] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.721215] VFS: Disk quotas dquot_6.5.2
[ 0.721238] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.721273] msgmni has been set to 15507
[ 0.721408] alg: No test for stdrng (krng)
[ 0.721462] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.721464] io scheduler noop registered
[ 0.721465] io scheduler anticipatory registered
[ 0.721466] io scheduler deadline registered
[ 0.721483] io scheduler cfq registered (default)
[ 0.868259] pci 0000:01:05.0: Boot video device
[ 0.868395] alloc irq_desc for 25 on cpu 0 node 0
[ 0.868397] alloc kstat_irqs on cpu 0 node 0
[ 0.868403] pcieport-driver 0000:00:06.0: irq 25 for MSI/MSI-X
[ 0.868409] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 0.870879] Linux agpgart interface v0.103
[ 0.870881] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.870995] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.871325] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.872473] brd: module loaded
[ 0.872532] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.872662] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.872664] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.872755] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.872842] mice: PS/2 mouse device common for all mice
[ 0.872881] rtc_cmos 00:03: RTC can wake from S4
[ 0.872911] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.872933] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.872953] cpuidle: using governor ladder
[ 0.872954] cpuidle: using governor menu
[ 0.872957] No iBFT detected.
[ 0.873174] TCP cubic registered
[ 0.873221] NET: Registered protocol family 10
[ 0.873512] lo: Disabled Privacy Extensions
[ 0.873695] Mobile IPv6
[ 0.873697] NET: Registered protocol family 17
[ 0.873798] registered taskstats version 1
[ 0.873912] rtc_cmos 00:03: setting system clock to 2009-09-11 08:50:47 UTC (1252659047)
[ 0.873944] Freeing unused kernel memory: 560k freed
[ 0.874068] Write protecting the kernel read-only data: 3812k
[ 0.889125] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.943988] Floppy drive(s): fd0 is 1.44M
[ 0.947547] ATL1E 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.947556] ATL1E 0000:02:00.0: setting latency timer to 64
[ 0.955809] SCSI subsystem initialized
[ 0.960337] Uniform Multi-Platform E-IDE driver
[ 0.961255] FDC 0 is a post-1991 82077
[ 0.961259] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.961310] alloc irq_desc for 17 on cpu 0 node 0
[ 0.961311] alloc kstat_irqs on cpu 0 node 0
[ 0.961317] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.961341] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.961402] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.961442] ehci_hcd 0000:00:12.2: debug port 1
[ 0.961457] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfbcff800
[ 0.970101] libata version 3.00 loaded.
[ 0.970488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.976040] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.976056] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.976058] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.976059] usb usb1: Product: EHCI Host Controller
[ 0.976061] usb usb1: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[ 0.976062] usb usb1: SerialNumber: 0000:00:12.2
[ 0.976115] usb usb1: configuration #1 chosen from 1 choice
[ 0.976133] hub 1-0:1.0: USB hub found
[ 0.976138] hub 1-0:1.0: 6 ports detected
[ 0.976265] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
[ 0.976274] alloc irq_desc for 16 on cpu 0 node 0
[ 0.976275] alloc kstat_irqs on cpu 0 node 0
[ 0.976280] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.976293] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[ 0.976297] ide0: BM-DMA at 0xff00-0xff07
[ 0.976302] atiixp 0000:00:14.1: simplex device: DMA disabled
[ 0.976304] ide1: DMA disabled
[ 0.976305] Probing IDE interface ide0...
[ 2.048254] hdb: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
[ 2.048285] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 2.048777] hdb: UDMA/33 mode selected
[ 2.049359] Probing IDE interface ide1...
[ 2.616283] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.624641] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.624825] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.624856] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 2.624903] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
[ 2.624926] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfbcfd000
[ 2.684250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.684252] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.684254] usb usb2: Product: OHCI Host Controller
[ 2.684255] usb usb2: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 2.684256] usb usb2: SerialNumber: 0000:00:12.0
[ 2.684293] usb usb2: configuration #1 chosen from 1 choice
[ 2.684310] hub 2-0:1.0: USB hub found
[ 2.684318] hub 2-0:1.0: 3 ports detected
[ 2.684497] ahci 0000:00:11.0: version 3.0
[ 2.684507] alloc irq_desc for 22 on cpu 0 node 0
[ 2.684509] alloc kstat_irqs on cpu 0 node 0
[ 2.684513] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.684549] alloc irq_desc for 26 on cpu 0 node 0
[ 2.684550] alloc kstat_irqs on cpu 0 node 0
[ 2.684559] ahci 0000:00:11.0: irq 26 for MSI/MSI-X
[ 2.684651] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.684654] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.684924] scsi0 : ahci
[ 2.685045] scsi1 : ahci
[ 2.685104] scsi2 : ahci
[ 2.685160] scsi3 : ahci
[ 2.685215] scsi4 : ahci
[ 2.685272] scsi5 : ahci
[ 2.685350] ata1: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd00 irq 26
[ 2.685353] ata2: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffd80 irq 26
[ 2.685355] ata3: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe00 irq 26
[ 2.685358] ata4: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcffe80 irq 26
[ 2.685360] ata5: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff00 irq 26
[ 2.685363] ata6: SATA max UDMA/133 abar m1024@0xfbcffc00 port 0xfbcfff80 irq 26
[ 2.685488] alloc irq_desc for 19 on cpu 0 node 0
[ 2.685490] alloc kstat_irqs on cpu 0 node 0
[ 2.685493] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.685504] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 2.685542] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
[ 2.685571] ehci_hcd 0000:00:13.2: debug port 1
[ 2.685583] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfbcff400
[ 2.696251] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.696261] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.696263] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.696264] usb usb3: Product: EHCI Host Controller
[ 2.696266] usb usb3: Manufacturer: Linux 2.6.30-1-amd64 ehci_hcd
[ 2.696267] usb usb3: SerialNumber: 0000:00:13.2
[ 2.696295] usb usb3: configuration #1 chosen from 1 choice
[ 2.696310] hub 3-0:1.0: USB hub found
[ 2.696315] hub 3-0:1.0: 6 ports detected
[ 2.696624] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.696634] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 2.696675] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 2.696690] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfbcfe000
[ 2.756242] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.756244] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.756245] usb usb4: Product: OHCI Host Controller
[ 2.756246] usb usb4: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 2.756247] usb usb4: SerialNumber: 0000:00:12.1
[ 2.756275] usb usb4: configuration #1 chosen from 1 choice
[ 2.756291] hub 4-0:1.0: USB hub found
[ 2.756298] hub 4-0:1.0: 3 ports detected
[ 2.756472] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.756482] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.756517] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 2.756536] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfbcfb000
[ 2.816247] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.816249] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.816251] usb usb5: Product: OHCI Host Controller
[ 2.816252] usb usb5: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 2.816253] usb usb5: SerialNumber: 0000:00:13.0
[ 2.816287] usb usb5: configuration #1 chosen from 1 choice
[ 2.816303] hub 5-0:1.0: USB hub found
[ 2.816309] hub 5-0:1.0: 3 ports detected
[ 2.816487] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.816498] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 2.816533] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 2.816547] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfbcfc000
[ 2.876248] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.876250] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.876251] usb usb6: Product: OHCI Host Controller
[ 2.876252] usb usb6: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 2.876253] usb usb6: SerialNumber: 0000:00:13.1
[ 2.876284] usb usb6: configuration #1 chosen from 1 choice
[ 2.876301] hub 6-0:1.0: USB hub found
[ 2.876307] hub 6-0:1.0: 3 ports detected
[ 2.876594] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.876606] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 2.876641] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 2.876656] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfbcfa000
[ 2.936245] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.936247] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.936248] usb usb7: Product: OHCI Host Controller
[ 2.936249] usb usb7: Manufacturer: Linux 2.6.30-1-amd64 ohci_hcd
[ 2.936251] usb usb7: SerialNumber: 0000:00:14.5
[ 2.936285] usb usb7: configuration #1 chosen from 1 choice
[ 2.936301] hub 7-0:1.0: USB hub found
[ 2.936307] hub 7-0:1.0: 2 ports detected
[ 3.005776] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.005800] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.005822] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.005843] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.088257] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 3.168262] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.168281] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.175137] ata3.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 3.175139] ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.175154] ata1.00: ATA-7: SAMSUNG HD103SI, 1AG01118, max UDMA7
[ 3.175156] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.182364] ata1.00: configured for UDMA/133
[ 3.182379] ata3.00: configured for UDMA/133
[ 3.196312] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 3.196416] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SI 1AG0 PQ: 0 ANSI: 5
[ 3.200547] ide-cd driver 5.00
[ 3.202162] ide-cd: hdb: ATAPI 48X DVD-ROM drive, 512kB Cache
[ 3.202165] Uniform CD-ROM driver Revision: 3.20
[ 3.205340] Driver 'sd' needs updating - please use bus_type methods
[ 3.205439] sd 0:0:0:0: [sda] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 3.205444] sd 2:0:0:0: [sdb] 1953525168 512-byte hardware sectors: (1.00 TB/931 GiB)
[ 3.205448] sd 0:0:0:0: [sda] Write Protect is off
[ 3.205450] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.205454] sd 2:0:0:0: [sdb] Write Protect is off
[ 3.205456] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.205461] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.205466] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.205539] sda:<6> sdb: sdb1 sdb2 < sda1 sda2 < sda5 > sda3 sda4
[ 3.239815] sdb5 > sdb3
[ 3.250606] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 3.254632] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.258260] usb 4-2: New USB device found, idVendor=046d, idProduct=c404
[ 3.258262] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.258264] usb 4-2: Product: Trackball
[ 3.258265] usb 4-2: Manufacturer: Logitech
[ 3.258311] usb 4-2: configuration #1 chosen from 1 choice
[ 3.264216] usbcore: registered new interface driver hiddev
[ 3.270662] input: Logitech Trackball as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/input/input2
[ 3.270694] generic-usb 0003:046D:C404.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:12.1-2/input0
[ 3.270704] usbcore: registered new interface driver usbhid
[ 3.270706] usbhid: v2.6:USB HID core driver
[ 3.580175] kjournald starting. Commit interval 5 seconds
[ 3.580184] EXT3-fs: mounted filesystem with ordered data mode.
[ 4.458039] udev: starting version 141
[ 4.909210] ACPI: WMI: Mapper loaded
[ 4.914686] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 4.917684] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 4.917709] ACPI: Power Button [PWRF]
[ 4.917760] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 4.917775] ACPI: Power Button [PWRB]
[ 4.942731] processor ACPI_CPU:00: registered as cooling_device0
[ 4.942735] ACPI: Processor [P001] (supports 8 throttling states)
[ 4.943126] processor ACPI_CPU:01: registered as cooling_device1
[ 4.943507] processor ACPI_CPU:02: registered as cooling_device2
[ 4.943881] processor ACPI_CPU:03: registered as cooling_device3
[ 4.945020] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.945260] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.004048] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
[ 5.004051] shpchp 0000:00:01.0: Cannot reserve MMIO region
[ 5.004098] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.229737] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.288712] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.288733] HDA Intel 0000:01:05.1: setting latency timer to 64
[ 5.885748] EXT3 FS on sda4, internal journal
[ 5.952118] it87: Found IT8720F chip at 0x290, revision 2
[ 5.952125] it87: in3 is VCC (+5V)
[ 5.952126] it87: in7 is VCCH (+5V Stand-By)
[ 7.054111] alloc irq_desc for 27 on cpu 0 node 0
[ 7.054113] alloc kstat_irqs on cpu 0 node 0
[ 7.054125] ATL1E 0000:02:00.0: irq 27 for MSI/MSI-X
[ 7.054243] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 7.054974] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 7.055707] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 7.107242] powernow-k8: Found 1 AMD Phenom(tm) II X4 955 Processor processors (4 cpu cores) (version 2.20.00)
[ 7.107284] powernow-k8: 0 : pstate 0 (3200 MHz)
[ 7.107286] powernow-k8: 1 : pstate 1 (2500 MHz)
[ 7.107287] powernow-k8: 2 : pstate 2 (2100 MHz)
[ 7.107289] powernow-k8: 3 : pstate 3 (800 MHz)
[ 7.676807] lp: driver loaded but no devices found
[ 7.685134] ppdev: user-space parallel port driver
[ 10.337210] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.453362] [drm] Initialized drm 1.1.0 20060810
[ 10.466261] pci 0000:01:05.0: setting latency timer to 64
[ 10.466503] [drm] Initialized radeon 1.30.0 20080528 for 0000:01:05.0 on minor 0
[ 10.816372] [drm] Setting GART location based on new memory map
[ 10.816689] [drm] Loading RS780 CP Microcode
[ 10.816691] platform r600_cp.0: firmware: requesting radeon/RS780_cp.bin
[ 10.914434] r600_cp: Failed to load firmware "radeon/RS780_cp.bin"
[ 10.914442] [drm:r600_do_init_cp] *ERROR* Failed to load firmware!
[ 17.653510] eth0: no IPv6 routers present
[ 282.049596] device-mapper: uevent: version 1.0.3
[ 282.050101] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 547.682886] md: md0 stopped.
[ 547.685061] md: bind<sdb5>
[ 547.685354] md: bind<sda5>
[ 547.685365] md: md0: raid array is not clean -- starting background reconstruction
[ 547.708856] md: raid1 personality registered for level 1
[ 547.709757] raid1: raid set md0 active with 2 out of 2 mirrors
[ 547.709901] md: resync of RAID array md0
[ 547.709909] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 547.709915] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 547.709925] md: using 128k window, over a total of 488279488 blocks.
[ 547.709930] md: resuming resync of md0 from checkpoint.
[ 547.710637] md0: unknown partition table
[ 1229.604867] kjournald starting. Commit interval 5 seconds
[ 1229.877564] EXT3 FS on sda1, internal journal
[ 1229.877576] EXT3-fs: mounted filesystem with ordered data mode.
[ 1895.360272] kjournald starting. Commit interval 5 seconds
[ 1895.366343] EXT3 FS on dm-0, internal journal
[ 1895.366354] EXT3-fs: mounted filesystem with ordered data mode.
[ 2280.720380] INFO: task kjournald:1168 blocked for more than 120 seconds.
[ 2280.720388] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2280.720395] kjournald D ffff88002807a0c0 0 1168 2
[ 2280.720405] ffff88022f19e140 0000000000000046 ffff880217bd2c28 ffff880217bc06e0
[ 2280.720415] 0000000000000086 00000000000120c0 000000000000e250 ffff88022f244280
[ 2280.720424] ffff88022f244570 0000000200000000 0000000000000000 ffffffff8020e5a9
[ 2280.720432] Call Trace:
[ 2280.720448] [<ffffffff8020e5a9>] ? __switch_to+0xae/0x263
[ 2280.720458] [<ffffffff80235f09>] ? set_next_entity+0x34/0x56
[ 2280.720469] [<ffffffff804b4500>] ? schedule+0x9/0x1d
[ 2280.720500] [<ffffffffa012fd4e>] ? journal_commit_transaction+0x108/0xdf6 [jbd]
[ 2280.720510] [<ffffffff8025473e>] ? autoremove_wake_function+0x0/0x2e
[ 2280.720520] [<ffffffff8024ad47>] ? try_to_del_timer_sync+0x52/0x5b
[ 2280.720541] [<ffffffffa01332e3>] ? kjournald+0xe4/0x229 [jbd]
[ 2280.720549] [<ffffffff8025473e>] ? autoremove_wake_function+0x0/0x2e
[ 2280.720568] [<ffffffffa01331ff>] ? kjournald+0x0/0x229 [jbd]
[ 2280.720585] [<ffffffffa01331ff>] ? kjournald+0x0/0x229 [jbd]
[ 2280.720594] [<ffffffff80254382>] ? kthread+0x54/0x80
[ 2280.720602] [<ffffffff80210aca>] ? child_rip+0xa/0x20
[ 2280.720611] [<ffffffff8025432e>] ? kthread+0x0/0x80
[ 2280.720617] [<ffffffff80210ac0>] ? child_rip+0x0/0x20
[ 2280.720644] INFO: task konqueror:2948 blocked for more than 120 seconds.
[ 2280.720648] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2280.720654] konqueror D ffff8800280940c0 0 2948 2868
[ 2280.720662] ffff88022c50b690 0000000000000082 ffff88020dd4cc90 ffffffff802dd7f7
[ 2280.720671] 00000000ffffffff 00000000000120c0 000000000000e250 ffff88022c63a400
[ 2280.720679] ffff88022c63a6f0 0000000310dc8748 ffff880217bd2bc0 ffff880217bd2c28
[ 2280.720687] Call Trace:
[ 2280.720695] [<ffffffff802dd7f7>] ? __find_get_block+0x176/0x186
[ 2280.720705] [<ffffffff80215db6>] ? read_tsc+0xa/0x20
[ 2280.720712] [<ffffffff802de217>] ? sync_buffer+0x0/0x40
[ 2280.720719] [<ffffffff804b4500>] ? schedule+0x9/0x1d
[ 2280.720727] [<ffffffff804b4577>] ? io_schedule+0x63/0xa5
[ 2280.720734] [<ffffffff802de252>] ? sync_buffer+0x3b/0x40
[ 2280.720742] [<ffffffff804b488c>] ? __wait_on_bit+0x41/0x70
[ 2280.720748] [<ffffffff802de217>] ? sync_buffer+0x0/0x40
[ 2280.720757] [<ffffffff804b4926>] ? out_of_line_wait_on_bit+0x6b/0x77
[ 2280.720764] [<ffffffff8025476c>] ? wake_bit_function+0x0/0x23
[ 2280.720793] [<ffffffffa0148034>] ? ext3_find_entry+0x3aa/0x558 [ext3]
[ 2280.720802] [<ffffffff802bb130>] ? kmem_getpages+0xdc/0x12b
[ 2280.720809] [<ffffffff802bbb8f>] ? cache_alloc_refill+0x6d/0x1f9
[ 2280.720837] [<ffffffffa0148a2c>] ? ext3_lookup+0x30/0xe4 [ext3]
[ 2280.720845] [<ffffffff802c816d>] ? __lookup_hash+0xc6/0xe7
[ 2280.720853] [<ffffffff802ca2e6>] ? do_filp_open+0x1e2/0x85a
[ 2280.720862] [<ffffffff802d2e24>] ? alloc_fd+0x67/0x10c
[ 2280.720869] [<ffffffff802bf2ad>] ? do_sys_open+0x4b/0xc8
[ 2280.720878] [<ffffffff8020fa42>] ? system_call_fastpath+0x16/0x1b
[ 2280.720891] INFO: task groupadd:10911 blocked for more than 120 seconds.
[ 2280.720895] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2280.720900] groupadd D ffff88002807a0c0 0 10911 10910
[ 2280.720908] ffff88022f171510 0000000000000086 ffff88022ac8f978 00000000000e0201
[ 2280.720916] ffff88022ac0e610 00000000000120c0 000000000000e250 ffff88022b50e300
[ 2280.720924] ffff88022b50e5f0 000000022b42ac48 ffff88022e8ef200 0000000000000000
[ 2280.720932] Call Trace:
[ 2280.720940] [<ffffffff80215db6>] ? read_tsc+0xa/0x20
[ 2280.720947] [<ffffffff802de217>] ? sync_buffer+0x0/0x40
[ 2280.720955] [<ffffffff804b4500>] ? schedule+0x9/0x1d
[ 2280.720962] [<ffffffff804b4577>] ? io_schedule+0x63/0xa5
[ 2280.720969] [<ffffffff802de252>] ? sync_buffer+0x3b/0x40
[ 2280.720977] [<ffffffff804b478f>] ? __wait_on_bit_lock+0x3f/0x84
[ 2280.720984] [<ffffffff802de217>] ? sync_buffer+0x0/0x40
[ 2280.720992] [<ffffffff804b483f>] ? out_of_line_wait_on_bit_lock+0x6b/0x77
[ 2280.720999] [<ffffffff8025476c>] ? wake_bit_function+0x0/0x23
[ 2280.721021] [<ffffffff802dd7f7>] ? __find_get_block+0x176/0x186
[ 2280.721042] [<ffffffffa012f042>] ? do_get_write_access+0x6a/0x409 [jbd]
[ 2280.721055] [<ffffffff802dd825>] ? __getblk+0x1e/0x295
[ 2280.721079] [<ffffffffa012f403>] ? journal_get_write_access+0x22/0x33 [jbd]
[ 2280.721115] [<ffffffffa014f281>] ? __ext3_journal_get_write_access+0x1e/0x47 [ext3]
[ 2280.721146] [<ffffffffa01431a8>] ? ext3_reserve_inode_write+0x3e/0x75 [ext3]
[ 2280.721177] [<ffffffffa01431f5>] ? ext3_mark_inode_dirty+0x16/0x31 [ext3]
[ 2280.721208] [<ffffffffa014923b>] ? ext3_rename+0x486/0x555 [ext3]
[ 2280.721221] [<ffffffff802c9b64>] ? vfs_rename+0x215/0x36e
[ 2280.721233] [<ffffffff802cad57>] ? sys_renameat+0x16d/0x1e9
[ 2280.721246] [<ffffffff802c407d>] ? sys_newlstat+0x23/0x30
[ 2280.721260] [<ffffffff8020fa42>] ? system_call_fastpath+0x16/0x1b
[ 2640.720039] INFO: task pdflush:262 blocked for more than 120 seconds.
[ 2640.720047] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2640.720054] pdflush D ffff8800280600c0 0 262 2
[ 2640.720063] ffff88022f1614d0 0000000000000046 ffffe2000523e358 ffffe2000523e3c8
[ 2640.720073] ffffe20006021fd8 00000000000120c0 000000000000e250 ffff88022f26c340
[ 2640.720082] ffff88022f26c630 00000001296df738 0000000000000008 ffff8802296df738
[ 2640.720091] Call Trace:
[ 2640.720108] [<ffffffff8020e5a9>] ? __switch_to+0xae/0x263
[ 2640.720120] [<ffffffff804b4ad5>] ? __mutex_lock_common+0x10f/0x17f
[ 2640.720130] [<ffffffff804b4944>] ? mutex_lock+0x12/0x28
[ 2640.720139] [<ffffffff802c23c1>] ? sync_supers+0x42/0xa6
[ 2640.720147] [<ffffffff802987f3>] ? wb_kupdate+0x2f/0x121
[ 2640.720156] [<ffffffff802994d7>] ? pdflush+0x159/0x23b
[ 2640.720164] [<ffffffff802987c4>] ? wb_kupdate+0x0/0x121
[ 2640.720171] [<ffffffff8029937e>] ? pdflush+0x0/0x23b
[ 2640.720181] [<ffffffff80254382>] ? kthread+0x54/0x80
[ 2640.720188] [<ffffffff80210aca>] ? child_rip+0xa/0x20
[ 2640.720197] [<ffffffff8025432e>] ? kthread+0x0/0x80
[ 2640.720203] [<ffffffff80210ac0>] ? child_rip+0x0/0x20
[ 2640.720213] INFO: task kjournald:1168 blocked for more than 120 seconds.
[ 2640.720217] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2640.720222] kjournald D ffff8800280940c0 0 1168 2
[ 2640.720230] ffff88022c50b690 0000000000000046 000000002b037ca0 0000000000000001
[ 2640.720239] ffff8802111b9200 00000000000120c0 000000000000e250 ffff88022f244280
[ 2640.720248] ffff88022f244570 0000000300000001 ffff88022e91f370 ffffffff8025b4d5
[ 2640.720256] Call Trace:
[ 2640.720265] [<ffffffff8025b4d5>] ? getnstimeofday+0x55/0xaf
[ 2640.720273] [<ffffffff802573be>] ? ktime_get_ts+0x21/0x49
[ 2640.720281] [<ffffffff80215db6>] ? read_tsc+0xa/0x20
[ 2640.720289] [<ffffffff802de217>] ? sync_buffer+0x0/0x40
[ 2640.720297] [<ffffffff804b4500>] ? schedule+0x9/0x1d
[ 2640.720304] [<ffffffff804b4577>] ? io_schedule+0x63/0xa5
[ 2640.720311] [<ffffffff802de252>] ? sync_buffer+0x3b/0x40
[ 2640.720319] [<ffffffff804b488c>] ? __wait_on_bit+0x41/0x70
[ 2640.720326] [<ffffffff802de217>] ? sync_buffer+0x0/0x40
[ 2640.720334] [<ffffffff804b4926>] ? out_of_line_wait_on_bit+0x6b/0x77
[ 2640.720341] [<ffffffff8025476c>] ? wake_bit_function+0x0/0x23
[ 2640.720372] [<ffffffffa013053b>] ? journal_commit_transaction+0x8f5/0xdf6 [jbd]
[ 2640.720383] [<ffffffff8024accf>] ? lock_timer_base+0x26/0x4c
[ 2640.720405] [<ffffffffa01332e3>] ? kjournald+0xe4/0x229 [jbd]
[ 2640.720412] [<ffffffff8025473e>] ? autoremove_wake_function+0x0/0x2e
[ 2640.720431] [<ffffffffa01331ff>] ? kjournald+0x0/0x229 [jbd]
[ 2640.720449] [<ffffffffa01331ff>] ? kjournald+0x0/0x229 [jbd]
[ 2640.720457] [<ffffffff80254382>] ? kthread+0x54/0x80
[ 2640.720464] [<ffffffff80210aca>] ? child_rip+0xa/0x20
[ 2640.720473] [<ffffffff8025432e>] ? kthread+0x0/0x80
[ 2640.720480] [<ffffffff80210ac0>] ? child_rip+0x0/0x20
[ 2640.720494] INFO: task Xorg:2614 blocked for more than 120 seconds.
[ 2640.720499] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2640.720503] Xorg D ffff8800280940c0 0 2614 2598
[ 2640.720511] ffff88022c50b690 0000000000000086 ffff88022d1b3978 000000000003d08f
[ 2640.720519] 0000000000000282 00000000000120c0 000000000000e250 ffff88022e90a2c0
[ 2640.720528] ffff88022e90a5b0 000000032d1b3978 ffff88022d1b3d48 ffffffff80256fa5
[ 2640.720535] Call Trace:
[ 2640.720543] [<ffffffff80256fa5>] ? hrtimer_cancel+0xc/0x16
[ 2640.720551] [<ffffffff804b4c9b>] ? schedule_hrtimeout_range+0xc8/0xf3
[ 2640.720560] [<ffffffff80215db6>] ? read_tsc+0xa/0x20
[ 2640.720567] [<ffffffff802de217>] ? sync_buffer+0x0/0x40
[ 2640.720574] [<ffffffff804b4500>] ? schedule+0x9/0x1d
[ 2640.720582] [<ffffffff804b4577>] ? io_schedule+0x63/0xa5
[ 2640.720588] [<ffffffff802de252>] ? sync_buffer+0x3b/0x40
[ 2640.720596] [<ffffffff804b478f>] ? __wait_on_bit_lock+0x3f/0x84
[ 2640.720603] [<ffffffff802de217>] ? sync_buffer+0x0/0x40
[ 2640.720611] [<ffffffff804b483f>] ? out_of_line_wait_on_bit_lock+0x6b/0x77
[ 2640.720618] [<ffffffff8025476c>] ? wake_bit_function+0x0/0x23
[ 2640.720625] [<ffffffff802dd7f7>] ? __find_get_block+0x176/0x186
[ 2640.720645] [<ffffffffa012f042>] ? do_get_write_access+0x6a/0x409 [jbd]
[ 2640.720652] [<ffffffff802dd825>] ? __getblk+0x1e/0x295
[ 2640.720661] [<ffffffff8040b0d6>] ? __alloc_skb+0x66/0x138
[ 2640.720681] [<ffffffffa012f403>] ? journal_get_write_access+0x22/0x33 [jbd]
[ 2640.720713] [<ffffffffa014f281>] ? __ext3_journal_get_write_access+0x1e/0x47 [ext3]
[ 2640.720740] [<ffffffffa01431a8>] ? ext3_reserve_inode_write+0x3e/0x75 [ext3]
[ 2640.720765] [<ffffffffa01431f5>] ? ext3_mark_inode_dirty+0x16/0x31 [ext3]
[ 2640.720784] [<ffffffffa012fb58>] ? journal_start+0x9a/0xce [jbd]
[ 2640.720809] [<ffffffffa0143347>] ? ext3_dirty_inode+0x63/0x7b [ext3]
[ 2640.720819] [<ffffffff802d9893>] ? __mark_inode_dirty+0x29/0x18a
[ 2640.720828] [<ffffffff802d0bf1>] ? file_update_time+0xb0/0xf5
[ 2640.720836] [<ffffffff802930ce>] ? __generic_file_aio_write_nolock+0x16e/0x293
[ 2640.720844] [<ffffffff8029399d>] ? generic_file_aio_write+0x64/0xc4
[ 2640.720869] [<ffffffffa0141384>] ? ext3_file_write+0x16/0x96 [ext3]
[ 2640.720877] [<ffffffff802c0a08>] ? do_sync_write+0xce/0x113
[ 2640.720884] [<ffffffff8025473e>] ? autoremove_wake_function+0x0/0x2e
[ 2640.720893] [<ffffffff8025277e>] ? synchronize_rcu+0x45/0x4b
[ 2640.720901] [<ffffffff80281785>] ? rcu_start_gp+0xdc/0x112
[ 2640.720908] [<ffffffff802c13a1>] ? vfs_write+0xa9/0x102
[ 2640.720916] [<ffffffff802c14b6>] ? sys_write+0x45/0x6e
[ 2640.720924] [<ffffffff8020fa42>] ? system_call_fastpath+0x16/0x1b
[ 2640.720933] INFO: task plasma-desktop:2912 blocked for more than 120 seconds.
[ 2640.720937] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2640.720942] plasma-deskto D ffff8800280940c0 0 2912 1
[ 2640.720950] ffff88022e90a2c0 0000000000000082 ffff88022c835e68 ffff8802294ef118
[ 2640.720958] ffff88022947ee00 00000000000120c0 000000000000e250 ffff88022e900fe0
[ 2640.720966] ffff88022e9012d0 00000003294ce118 ffffffff802c8532 ffff8802111fa000
[ 2640.720974] Call Trace:
[ 2640.720981] [<ffffffff802c8532>] ? inode_permission+0x82/0xa1
[ 2640.720989] [<ffffffff802c867c>] ? __link_path_walk+0x12b/0x70b
[ 2640.720998] [<ffffffff804b4ad5>] ? __mutex_lock_common+0x10f/0x17f
[ 2640.721022] [<ffffffff804b4944>] ? mutex_lock+0x12/0x28
[ 2640.721029] [<ffffffff802ca2de>] ? do_filp_open+0x1da/0x85a
[ 2640.721043] [<ffffffff802d2e24>] ? alloc_fd+0x67/0x10c
[ 2640.721054] [<ffffffff802bf2ad>] ? do_sys_open+0x4b/0xc8
[ 2640.721067] [<ffffffff8020fa42>] ? system_call_fastpath+0x16/0x1b
[ 2640.721078] INFO: task konqueror:2948 blocked for more than 120 seconds.
[ 2640.721085] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2640.721094] konqueror D ffff8800280940c0 0 2948 2868
[ 2640.721108] ffff88022f333590 0000000000000082 ffff88022a959e68 ffff8802294ef118
[ 2640.721128] ffff88022947ee00 00000000000120c0 000000000000e250 ffff88022c63a400
[ 2640.721147] ffff88022c63a6f0 00000003294ce118 ffffffff802c8532 ffff88022ccdc000
[ 2640.721166] Call Trace:
[ 2640.721177] [<ffffffff802c8532>] ? inode_permission+0x82/0xa1
[ 2640.721188] [<ffffffff802c867c>] ? __link_path_walk+0x12b/0x70b
[ 2640.721202] [<ffffffff804b4ad5>] ? __mutex_lock_common+0x10f/0x17f
[ 2640.721214] [<ffffffff804b4944>] ? mutex_lock+0x12/0x28
[ 2640.721226] [<ffffffff802ca2de>] ? do_filp_open+0x1da/0x85a
[ 2640.721238] [<ffffffff802d2e24>] ? alloc_fd+0x67/0x10c
[ 2640.721249] [<ffffffff802bf2ad>] ? do_sys_open+0x4b/0xc8
[ 2640.721261] [<ffffffff8020fa42>] ? system_call_fastpath+0x16/0x1b
[ 2640.721271] INFO: task konsole:2997 blocked for more than 120 seconds.
[ 2640.721278] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2640.721287] konsole D ffff8800280460c0 0 2997 1
[ 2640.721300] ffff88022e90a2c0 0000000000000082 ffff880210ddd198 ffff880210dc3678
[ 2640.721319] 0000000000000000 00000000000120c0 000000000000e250 ffff88022f2bc500
[ 2640.721338] ffff88022f2bc7f0 00000000802dd825 ffff8802214bd118 000000010000000b
[ 2640.721357] Call Trace:
[ 2640.721369] [<ffffffff804b4500>] ? schedule+0x9/0x1d
[ 2640.721393] [<ffffffffa012f1e0>] ? do_get_write_access+0x208/0x409 [jbd]
[ 2640.721404] [<ffffffff8025476c>] ? wake_bit_function+0x0/0x23
[ 2640.721417] [<ffffffff802dd825>] ? __getblk+0x1e/0x295
[ 2640.721440] [<ffffffffa012f403>] ? journal_get_write_access+0x22/0x33 [jbd]
[ 2640.721473] [<ffffffffa014f281>] ? __ext3_journal_get_write_access+0x1e/0x47 [ext3]
[ 2640.721503] [<ffffffffa0141ca9>] ? ext3_new_inode+0x4e9/0x9d9 [ext3]
[ 2640.721532] [<ffffffffa012f98f>] ? start_this_handle+0x2cd/0x33e [jbd]
[ 2640.721565] [<ffffffffa01487d1>] ? ext3_create+0x8f/0x10c [ext3]
[ 2640.721577] [<ffffffff802c96b2>] ? vfs_create+0x6d/0x89
[ 2640.721589] [<ffffffff802ca3ac>] ? do_filp_open+0x2a8/0x85a
[ 2640.721603] [<ffffffff802bf2ad>] ? do_sys_open+0x4b/0xc8
[ 2640.721616] [<ffffffff8020fa42>] ? system_call_fastpath+0x16/0x1b
[ 2640.721626] INFO: task xulrunner-stub:9276 blocked for more than 120 seconds.
[ 2640.721634] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 2640.721642] xulrunner-stu D ffff8800280460c0 0 9276 2928
[ 2640.721656] ffffffff805c2390 0000000000000086 ffffffff00000001 ffff88020dcbde70
[ 2640.721676] ffff88022d0eded8 00000000000120c0 000000000000e250 ffff88022c4aade0
[ 2640.721695] ffff88022c4ab0d0 000000000025e00a 0000000000001000 ffffffff8025465f
[ 2640.721714] Call Trace:
[ 2640.721725] [<ffffffff8025465f>] ? bit_waitqueue+0x10/0xa0
[ 2640.721735] [<ffffffff8025472d>] ? wake_up_bit+0x11/0x22
[ 2640.721746] [<ffffffff8025465f>] ? bit_waitqueue+0x10/0xa0
[ 2640.721758] [<ffffffff804b4500>] ? schedule+0x9/0x1d
[ 2640.721781] [<ffffffffa012f1e0>] ? do_get_write_access+0x208/0x409 [jbd]
[ 2640.721793] [<ffffffff8025476c>] ? wake_bit_function+0x0/0x23
[ 2640.721816] [<ffffffffa012f403>] ? journal_get_write_access+0x22/0x33 [jbd]
[ 2640.721850] [<ffffffffa014f281>] ? __ext3_journal_get_write_access+0x1e/0x47 [ext3]
[ 2640.721882] [<ffffffffa0148cd3>] ? ext3_orphan_add+0x7c/0x15e [ext3]
[ 2640.721912] [<ffffffffa0143207>] ? ext3_mark_inode_dirty+0x28/0x31 [ext3]
[ 2640.721944] [<ffffffffa0149633>] ? ext3_unlink+0x166/0x1b4 [ext3]
[ 2640.721956] [<ffffffff802c9852>] ? vfs_unlink+0x72/0xb2
[ 2640.721968] [<ffffffff802cae92>] ? do_unlinkat+0xad/0x134
[ 2640.721980] [<ffffffff802bf18e>] ? filp_close+0x5b/0x62
[ 2640.721993] [<ffffffff8020fa42>] ? system_call_fastpath+0x16/0x1b
[ 7671.134661] md: md0: resync done.
[ 7671.262254] RAID1 conf printout:
[ 7671.262261] --- wd:2 rd:2
[ 7671.262267] disk 0, wo:0, o:1, dev:sda5
[ 7671.262273] disk 1, wo:0, o:1, dev:sdb5
[-- Attachment #4: config --]
[-- Type: text/x-mpsub, Size: 69698 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc7
# Mon Feb 8 23:54:37 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
# CONFIG_TREE_RCU is not set
CONFIG_TREE_PREEMPT_RCU=y
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEBUG_CFQ_IOSCHED is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_K8_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda3"
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_LBLC is not set
# CONFIG_IP_VS_LBLCR is not set
# CONFIG_IP_VS_DH is not set
# CONFIG_IP_VS_SH is not set
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
#
# IPVS application helper
#
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="radeon/R600_rlc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_CB710_CORE=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
CONFIG_PATA_ATIIXP=m
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1920
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=m
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ATK0110=m
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_88PM8607 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_IR_CORE=m
CONFIG_VIDEO_IR=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=30
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=m
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set
#
# LED drivers
#
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD64=y
CONFIG_EDAC_AMD64_ERROR_INJECTION=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_USB_IP_COMMON is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_RT2860 is not set
CONFIG_RT2870=m
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_ALTERA_PCIE_CHDMA is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192SU is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTL8192E is not set
# CONFIG_INPUT_MIMIO is not set
# CONFIG_TRANZPORT is not set
#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#
# CONFIG_INPUT_GPIO is not set
# CONFIG_POHMELFS is not set
# CONFIG_B3DFG is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_PLAN9AUTH is not set
# CONFIG_LINE6_USB is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_NOUVEAU is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_UDL is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
#
# RAR Register Driver
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set
# CONFIG_RAMZSWAP is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_STRIP is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=1250
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
[-- Attachment #5: lspci --]
[-- Type: text/plain, Size: 2000 bytes --]
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3300 Graphics
01:05.1 Audio device: ATI Technologies Inc RS780 Azalia controller
02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403
03:06.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
[-- Attachment #6: lsusb --]
[-- Type: text/plain, Size: 711 bytes --]
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:c404 Logitech, Inc. TrackMan Wheel
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 046d:c401 Logitech, Inc. TrackMan Marble Wheel
Bus 001 Device 004: ID 046a:002d Cherry GmbH SmartTerminal XX44
Bus 001 Device 002: ID 0424:2504 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[-- Attachment #7: cpuinfo --]
[-- Type: text/plain, Size: 3340 bytes --]
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 955 Processor
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 0
cpu cores : 4
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6423.08
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 955 Processor
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 1
cpu cores : 4
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6424.47
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 2
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 955 Processor
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 2
cpu cores : 4
apicid : 2
initial apicid : 2
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6424.41
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 3
vendor_id : AuthenticAMD
cpu family : 16
model : 4
model name : AMD Phenom(tm) II X4 955 Processor
stepping : 2
cpu MHz : 800.000
cache size : 512 KB
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
apicid : 3
initial apicid : 3
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
bogomips : 6424.47
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.33-rc7 problems usb CF
2010-02-09 22:06 2.6.33-rc7 problems ST
@ 2010-02-10 23:40 ` ST
2010-02-11 0:52 ` 2.6.33-rc7 problems Robert Hancock
1 sibling, 0 replies; 9+ messages in thread
From: ST @ 2010-02-10 23:40 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: Text/Plain, Size: 642 bytes --]
Hi
Concerning the problems in the non working card reader. The SD Cards are
working but the CF Card is not. (Cardreader: Logitech (Alcor Micro) USB )
So if anybody has a working .config for a recent kernel
where a USB Compact Flash reader is known to work, i would be happy if she/he
could send this config file to me.
I am really out of clues why this is not working. It works under Debian with
Stock kernel but not with my config. It also works with Ubuntu Karmic (2.6.32)
but not with my config and a vanilla 2.6.32 kernel. I also consider it an error
that a "make defconfig" kernel is also not able to read the cf card.
Thanks
ST
[-- Attachment #2: .config --]
[-- Type: text/x-mpsub, Size: 69699 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc7
# Thu Feb 11 00:21:28 2010
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_CONSTRUCTORS=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="tim"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
# CONFIG_TREE_RCU is not set
CONFIG_TREE_PREEMPT_RCU=y
# CONFIG_TINY_RCU is not set
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_RESOURCE_COUNTERS=y
# CONFIG_CGROUP_MEM_RES_CTLR is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_PERF_COUNTERS is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_SLOW_WORK=y
# CONFIG_SLOW_WORK_DEBUG is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_CFQ_GROUP_IOSCHED=y
# CONFIG_DEBUG_CFQ_IOSCHED is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_PREEMPT_NOTIFIERS=y
# CONFIG_INLINE_SPIN_TRYLOCK is not set
# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK is not set
# CONFIG_INLINE_SPIN_LOCK_BH is not set
# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
# CONFIG_INLINE_SPIN_UNLOCK is not set
# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_READ_TRYLOCK is not set
# CONFIG_INLINE_READ_LOCK is not set
# CONFIG_INLINE_READ_LOCK_BH is not set
# CONFIG_INLINE_READ_LOCK_IRQ is not set
# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
# CONFIG_INLINE_READ_UNLOCK is not set
# CONFIG_INLINE_READ_UNLOCK_BH is not set
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
# CONFIG_INLINE_WRITE_TRYLOCK is not set
# CONFIG_INLINE_WRITE_LOCK is not set
# CONFIG_INLINE_WRITE_LOCK_BH is not set
# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
# CONFIG_INLINE_WRITE_UNLOCK is not set
# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set
# CONFIG_X86_MPPARSE is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_PARAVIRT_GUEST=y
# CONFIG_XEN is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_MEMTEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_AMD_IOMMU=y
CONFIG_AMD_IOMMU_STATS=y
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_IOMMU_API=y
CONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
# CONFIG_MICROCODE_INTEL is not set
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
# CONFIG_K8_NUMA is not set
CONFIG_X86_64_ACPI_NUMA=y
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not set
CONFIG_NODES_SHIFT=4
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION_NVS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION="/dev/sda3"
# CONFIG_PM_RUNTIME is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_POWER_METER=m
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=m
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_P4_CLOCKMOD=m
#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_DMAR=y
CONFIG_DMAR_DEFAULT_ON=y
CONFIG_DMAR_FLOPPY_WA=y
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIE_ECRC=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_STUB=m
CONFIG_HT_IRQ=y
CONFIG_PCI_IOV=y
CONFIG_PCI_IOAPIC=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=y
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_MAC is not set
# CONFIG_NETFILTER_XT_MATCH_MARK is not set
# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_TIME is not set
# CONFIG_NETFILTER_XT_MATCH_U32 is not set
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
# CONFIG_IP_VS_PROTO_TCP is not set
# CONFIG_IP_VS_PROTO_UDP is not set
# CONFIG_IP_VS_PROTO_ESP is not set
# CONFIG_IP_VS_PROTO_AH is not set
#
# IPVS scheduler
#
# CONFIG_IP_VS_RR is not set
# CONFIG_IP_VS_WRR is not set
# CONFIG_IP_VS_LC is not set
# CONFIG_IP_VS_WLC is not set
# CONFIG_IP_VS_LBLC is not set
# CONFIG_IP_VS_LBLCR is not set
# CONFIG_IP_VS_DH is not set
# CONFIG_IP_VS_SH is not set
# CONFIG_IP_VS_SED is not set
# CONFIG_IP_VS_NQ is not set
#
# IPVS application helper
#
#
# IP: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV4 is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=y
CONFIG_BRIDGE=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=y
# CONFIG_VLAN_8021Q_GVRP is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_BT_MRVL is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_PRIV=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_LIB80211 is not set
#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE="radeon/R600_rlc.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
CONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_CB710_CORE=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=m
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=m
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
# CONFIG_IDE_PROC_FS is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_PLATFORM=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
#
# PCI IDE chipsets support
#
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=m
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATP867X is not set
CONFIG_PATA_ATIIXP=m
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
# CONFIG_MULTICORE_RAID456 is not set
CONFIG_MD_RAID6_PQ=m
# CONFIG_ASYNC_RAID6_TEST is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks.
#
#
# The newer stack is recommended.
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_ATL1E=m
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_WLAN=y
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_PRISM54 is not set
CONFIG_USB_ZD1201=m
# CONFIG_HOSTAP is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_VIRTIO_NET is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1920
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
# CONFIG_TABLET_USB_AIPTEK is not set
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=m
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
# CONFIG_INPUT_UINPUT is not set
# CONFIG_INPUT_WINBOND_CIR is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
CONFIG_HW_RANDOM_AMD=y
# CONFIG_HW_RANDOM_VIA is not set
CONFIG_HW_RANDOM_VIRTIO=m
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
CONFIG_SENSORS_ATK0110=m
# CONFIG_SENSORS_LIS3LV02D is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_SBC_FITPC2_WATCHDOG is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_ITCO_WDT is not set
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not set
# CONFIG_MFD_88PM8607 is not set
CONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_MAX8660 is not set
# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_REGULATOR_TPS65023 is not set
# CONFIG_REGULATOR_TPS6507X is not set
CONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_IR_CORE=m
CONFIG_VIDEO_IR=m
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_MEDIA_TUNER_MC44S803=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_IR_I2C=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
CONFIG_USB_GSPCA=m
# CONFIG_USB_M5602 is not set
# CONFIG_USB_STV06XX is not set
# CONFIG_USB_GL860 is not set
# CONFIG_USB_GSPCA_CONEX is not set
# CONFIG_USB_GSPCA_ETOMS is not set
# CONFIG_USB_GSPCA_FINEPIX is not set
# CONFIG_USB_GSPCA_JEILINJ is not set
# CONFIG_USB_GSPCA_MARS is not set
# CONFIG_USB_GSPCA_MR97310A is not set
# CONFIG_USB_GSPCA_OV519 is not set
# CONFIG_USB_GSPCA_OV534 is not set
# CONFIG_USB_GSPCA_PAC207 is not set
# CONFIG_USB_GSPCA_PAC7302 is not set
# CONFIG_USB_GSPCA_PAC7311 is not set
# CONFIG_USB_GSPCA_SN9C20X is not set
# CONFIG_USB_GSPCA_SONIXB is not set
# CONFIG_USB_GSPCA_SONIXJ is not set
# CONFIG_USB_GSPCA_SPCA500 is not set
# CONFIG_USB_GSPCA_SPCA501 is not set
# CONFIG_USB_GSPCA_SPCA505 is not set
# CONFIG_USB_GSPCA_SPCA506 is not set
# CONFIG_USB_GSPCA_SPCA508 is not set
# CONFIG_USB_GSPCA_SPCA561 is not set
# CONFIG_USB_GSPCA_SQ905 is not set
# CONFIG_USB_GSPCA_SQ905C is not set
# CONFIG_USB_GSPCA_STK014 is not set
# CONFIG_USB_GSPCA_STV0680 is not set
# CONFIG_USB_GSPCA_SUNPLUS is not set
# CONFIG_USB_GSPCA_T613 is not set
# CONFIG_USB_GSPCA_TV8532 is not set
# CONFIG_USB_GSPCA_VC032X is not set
# CONFIG_USB_GSPCA_ZC3XX is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
CONFIG_USB_PWC_INPUT_EVDEV=y
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_I2C_SI4713 is not set
# CONFIG_RADIO_SI4713 is not set
# CONFIG_USB_DSBR is not set
# CONFIG_RADIO_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not set
# CONFIG_RADIO_TEF6862 is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_DRM=y
CONFIG_DRM_KMS_HELPER=y
CONFIG_DRM_TTM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
CONFIG_DRM_RADEON_KMS=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_BACKLIGHT is not set
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_INPUT_JACK=y
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_INTELHDMI=y
CONFIG_SND_HDA_ELD=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=30
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
CONFIG_SND_USB_USX2Y=m
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=m
CONFIG_HID_KYE=m
CONFIG_HID_GYRATION=m
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_NTRIG=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
CONFIG_HID_GREENASIA=m
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=m
# CONFIG_SMARTJOYPLUS_FF is not set
CONFIG_HID_TOPSEED=m
CONFIG_HID_THRUSTMASTER=m
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_WACOM=m
CONFIG_HID_ZEROPLUS=m
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options
#
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
# CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_FUNSOFT is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
CONFIG_MMC_TEST=m
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_SDHCI_PCI is not set
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=m
# CONFIG_MMC_AT91 is not set
# CONFIG_MMC_ATMELMCI is not set
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set
#
# LED drivers
#
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_AMD64=y
CONFIG_EDAC_AMD64_ERROR_INJECTION=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5000 is not set
# CONFIG_EDAC_I5100 is not set
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
CONFIG_STAGING=y
# CONFIG_STAGING_EXCLUDE_BUILD is not set
# CONFIG_ET131X is not set
# CONFIG_SLICOSS is not set
# CONFIG_VIDEO_GO7007 is not set
# CONFIG_USB_IP_COMMON is not set
# CONFIG_PRISM2_USB is not set
# CONFIG_ECHO is not set
# CONFIG_RT2860 is not set
CONFIG_RT2870=m
# CONFIG_COMEDI is not set
# CONFIG_ASUS_OLED is not set
# CONFIG_ALTERA_PCIE_CHDMA is not set
# CONFIG_R8187SE is not set
# CONFIG_RTL8192SU is not set
# CONFIG_RTL8192U is not set
# CONFIG_RTL8192E is not set
# CONFIG_INPUT_MIMIO is not set
# CONFIG_TRANZPORT is not set
#
# Qualcomm MSM Camera And Video
#
#
# Camera Sensor Selection
#
# CONFIG_INPUT_GPIO is not set
# CONFIG_POHMELFS is not set
# CONFIG_B3DFG is not set
# CONFIG_IDE_PHISON is not set
# CONFIG_PLAN9AUTH is not set
# CONFIG_LINE6_USB is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_NOUVEAU is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_USB_SERIAL_QUATECH2 is not set
# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
# CONFIG_VT6655 is not set
# CONFIG_VT6656 is not set
# CONFIG_FB_UDL is not set
# CONFIG_HYPERV is not set
# CONFIG_VME_BUS is not set
#
# RAR Register Driver
#
# CONFIG_RAR_REGISTER is not set
# CONFIG_IIO is not set
# CONFIG_RAMZSWAP is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_STRIP is not set
# CONFIG_FB_SM7XX is not set
# CONFIG_X86_PLATFORM_DEVICES is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT23=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
# CONFIG_INOTIFY is not set
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not set
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_OPTIMIZE_INLINING is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_INTEL_TXT is not set
# CONFIG_DEFAULT_SECURITY_SELINUX is not set
# CONFIG_DEFAULT_SECURITY_SMACK is not set
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_NLATTR=y
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.33-rc7 problems
2010-02-09 22:06 2.6.33-rc7 problems ST
2010-02-10 23:40 ` 2.6.33-rc7 problems usb CF ST
@ 2010-02-11 0:52 ` Robert Hancock
2010-02-11 21:11 ` ST
2010-02-11 22:54 ` ST
1 sibling, 2 replies; 9+ messages in thread
From: Robert Hancock @ 2010-02-11 0:52 UTC (permalink / raw)
To: ST; +Cc: linux-kernel
On 02/09/2010 04:06 PM, ST wrote:
> Hi
>
> I am currently running the linus main git tree with the last commit beeing:
> deb0c98c7f6035d47a247e548384517a955314a5 (2.6.33-rc7)
>
> USB Cardreader:
> Since i am now in my third attempt to get my usb flashreader going under this
> kernel (damn this must be simple right?). I have my doubts if this is probably
> not a .config but a kernel problem. If i plug in the usb card reader i get the
> output as attached in the file "usb_problems". The .config will be also
> attached. So i thought "ok, no problem i messed up", what about the defconfig.
> (arch/x86/configs/x86_64_defconfig).
> The defconfig works slightly better by omitting the repeating thread
> awake/thread sleeping output but no device is found usable. The distribution
> is Debian/Sid. The hardware is working with the standard Debian kernel 2.6.30.
> I had a similar error when i had an typo in the default codepage "utf-8" vs.
> "utf8". But this error is fixed now and USB Sticks are working fine.
Well, the card reader apparently reports medium not present.. is there
anything in there? how is it not working?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.33-rc7 problems
2010-02-11 0:52 ` 2.6.33-rc7 problems Robert Hancock
@ 2010-02-11 21:11 ` ST
2010-02-11 22:54 ` ST
1 sibling, 0 replies; 9+ messages in thread
From: ST @ 2010-02-11 21:11 UTC (permalink / raw)
To: Robert Hancock; +Cc: linux-kernel
Hi Robert
Thanks for your reply.
> Well, the card reader apparently reports medium not present.. is there
> anything in there? how is it not working?
Well thats exactly the problem since there is a CF Card plugged into the
reader.
I just checked with Fedora 12 and 2.6.31. The output there looks
like this (and i am 100% sure its not an HW error. Since i plugged out the
USB plug not the CF card an use the same USB port while dualbooting):
usb 1-4.3: SerialNumber: 058F63646476
usb 1-4.3: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
generic-usb: probe of 0003:058F:6364.0004 failed with error -22
usb-storage: device scan complete
scsi 9:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
scsi 9:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 9:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
scsi 9:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
CCS
sd 9:0:0:0: Attached scsi generic sg3 type 0
sd 9:0:0:1: Attached scsi generic sg4 type 0
sd 9:0:0:2: Attached scsi generic sg5 type 0
sd 9:0:0:3: Attached scsi generic sg6 type 0
sd 9:0:0:3: [sdf] Attached SCSI removable disk
sd 9:0:0:1: [sdd] 15858864 512-byte logical blocks: (8.11 GB/7.56 GiB)
With my config it stops with :
scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
So either some CF Card stuff is missing (old ata stuff needed?) or there is
some other SCSI stuff going on i don't understand...
Since the device scan with my strange config never completes it never has any
devices to offer...
I also checked with 2.6.32 with my config. Same bad result, so i guess it is
not a regression.
Best regards
ST
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.33-rc7 problems
2010-02-11 0:52 ` 2.6.33-rc7 problems Robert Hancock
2010-02-11 21:11 ` ST
@ 2010-02-11 22:54 ` ST
2010-02-12 1:49 ` Robert Hancock
1 sibling, 1 reply; 9+ messages in thread
From: ST @ 2010-02-11 22:54 UTC (permalink / raw)
To: Robert Hancock; +Cc: linux-kernel
Hi
> Well, the card reader apparently reports medium not present.. is there
> anything in there? how is it not working?
Just another information: It seems as if *only* the SD Card component of
the reader is detected. This explains why there are only no medium present
results in the calls. There was no SD card plugged into the usb-reader. The
others like CF,Xd,MS are not detected as it seems, while the SD Card component
is indeed working as expected and seen in the log.
ST
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.33-rc7 problems
2010-02-11 22:54 ` ST
@ 2010-02-12 1:49 ` Robert Hancock
2010-02-12 23:18 ` ST
0 siblings, 1 reply; 9+ messages in thread
From: Robert Hancock @ 2010-02-12 1:49 UTC (permalink / raw)
To: ST; +Cc: linux-kernel
On Thu, Feb 11, 2010 at 4:54 PM, ST <st@iss.tu-darmstadt.de> wrote:
> Hi
>> Well, the card reader apparently reports medium not present.. is there
>> anything in there? how is it not working?
> Just another information: It seems as if *only* the SD Card component of
> the reader is detected. This explains why there are only no medium present
> results in the calls. There was no SD card plugged into the usb-reader. The
> others like CF,Xd,MS are not detected as it seems, while the SD Card component
> is indeed working as expected and seen in the log.
It looks like this device is like a lot of other multi card-readers in
that it actually is 4 separate logical units (one for SD/MMC, one for
CF, one for SM/xD and one for MS). Each of them operates
independently, which is why you get (or should get) 4 separate drives
showing up. I'm still not sure what you're saying the problem is
though - you're not getting all of the drives detected? Can you post
the full dmesg from 2.6.32 when connecting the drive?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.33-rc7 problems
2010-02-12 1:49 ` Robert Hancock
@ 2010-02-12 23:18 ` ST
2010-02-13 1:14 ` Robert Hancock
0 siblings, 1 reply; 9+ messages in thread
From: ST @ 2010-02-12 23:18 UTC (permalink / raw)
To: Robert Hancock; +Cc: linux-kernel
Hi Robert
> Can you post
> the full dmesg from 2.6.32 when connecting the drive?
The dmesg when connecting the drive is attached. This is
from a Fedora 12 installation. Hopefully this is enough?
Mh, it seems as if the following lines are missing in the failing case?:
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
Is there probably a wrong driver bound to the wrong driver?
(Didn't find anything suspicious under /sysfs)
Why is "usb_stor_init" not called?
I just tried to get a working kernel by using "make localyesconfig"
under fedora. But it still only detects the the SD card...
Thank you very much for your help.
ST
The Fedora 12 installation with 2.6.31.5-127.fc12.x86_64:
udev: starting version 145
usb 1-4.3: new high speed USB device using ehci_hcd and address 6
usb 1-4.3: New USB device found, idVendor=058f, idProduct=6364
usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.3: Product: Mass Storage Device
usb 1-4.3: Manufacturer: Generic
usb 1-4.3: SerialNumber: 058F63646476
usb 1-4.3: configuration #1 chosen from 1 choice
generic-usb: probe of 0003:058F:6364.0003 failed with error -22
Initializing USB Mass Storage driver...
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
scsi 8:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0
scsi 8:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0
CCS
sd 8:0:0:0: Attached scsi generic sg3 type 0
sd 8:0:0:1: Attached scsi generic sg4 type 0
sd 8:0:0:2: Attached scsi generic sg5 type 0
sd 8:0:0:3: Attached scsi generic sg6 type 0
sd 8:0:0:2: [sde] Attached SCSI removable disk
sd 8:0:0:0: [sdc] Attached SCSI removable disk
sd 8:0:0:3: [sdf] Attached SCSI removable disk
sd 8:0:0:1: [sdd] 15858864 512-byte logical blocks: (8.11 GB/7.56 GiB)
sd 8:0:0:1: [sdd] Write Protect is off
sd 8:0:0:1: [sdd] Mode Sense: 03 00 00 00
sd 8:0:0:1: [sdd] Assuming drive cache: write through
sd 8:0:0:1: [sdd] Assuming drive cache: write through
sdd: sdd1 sdd2
sd 8:0:0:1: [sdd] Assuming drive cache: write through
sd 8:0:0:1: [sdd] Attached SCSI removable disk
The failure without usb block debug output:
hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0008
hub 1-4:1.0: port 3, status 0101, change 0001, 12 Mb/s
hub 1-4:1.0: debounce: port 3: total 100ms stable 100ms status 0x101
hub 1-4:1.0: port 3 not reset yet, waiting 10ms
usb 1-4.3: new high speed USB device using ehci_hcd and address 6
hub 1-4:1.0: port 3 not reset yet, waiting 10ms
usb 1-4.3: skipped 1 descriptor after interface
usb 1-4.3: default language 0x0409
usb 1-4.3: udev 6, busnum 1, minor = 5
usb 1-4.3: New USB device found, idVendor=058f, idProduct=6364
usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4.3: Product: Mass Storage Device
usb 1-4.3: Manufacturer: Generic
usb 1-4.3: SerialNumber: 058F63646476
usb 1-4.3: uevent
usb 1-4.3: usb_probe_device
usb 1-4.3: configuration #1 chosen from 1 choice
usb 1-4.3: adding 1-4.3:1.0 (config #1, interface 0)
usb 1-4.3:1.0: uevent
usb-storage 1-4.3:1.0: usb_probe_interface
usb-storage 1-4.3:1.0: usb_probe_interface - got id
scsi8 : usb-storage 1-4.3:1.0
usb 1-4.3: adding 1-4.3:1.1 (config #1, interface 1)
usb 1-4.3:1.1: uevent
usbhid 1-4.3:1.1: usb_probe_interface
usbhid 1-4.3:1.1: usb_probe_interface - got id
generic-usb: probe of 0003:058F:6364.0003 failed with error -22
drivers/usb/core/inode.c: creating file '006'
hub 1-4:1.0: state 7 ports 4 chg 0000 evt 0008
usb 1-4.3: uevent
scsi 8:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0
sd 8:0:0:0: [sdc] Attached SCSI removable disk
usb 1-4.3:1.0: uevent
usb 1-4.3: uevent
usb 1-4.3:1.0: uevent
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: 2.6.33-rc7 problems
2010-02-12 23:18 ` ST
@ 2010-02-13 1:14 ` Robert Hancock
2010-02-13 20:02 ` PATCH was " ST
0 siblings, 1 reply; 9+ messages in thread
From: Robert Hancock @ 2010-02-13 1:14 UTC (permalink / raw)
To: ST; +Cc: linux-kernel
On Fri, Feb 12, 2010 at 5:18 PM, ST <st@iss.tu-darmstadt.de> wrote:
> Hi Robert
>> Can you post
>> the full dmesg from 2.6.32 when connecting the drive?
> The dmesg when connecting the drive is attached. This is
> from a Fedora 12 installation. Hopefully this is enough?
>
> Mh, it seems as if the following lines are missing in the failing case?:
> Initializing USB Mass Storage driver...
> scsi8 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 6
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> usb-storage: device scan complete
>
> Is there probably a wrong driver bound to the wrong driver?
> (Didn't find anything suspicious under /sysfs)
> Why is "usb_stor_init" not called?
>
> I just tried to get a working kernel by using "make localyesconfig"
> under fedora. But it still only detects the the SD card...
>
> Thank you very much for your help.
> ST
>
Do you have CONFIG_SCSI_MULTI_LUN=y set in your kernel configuration?
^ permalink raw reply [flat|nested] 9+ messages in thread
* PATCH was Re: 2.6.33-rc7 problems
2010-02-13 1:14 ` Robert Hancock
@ 2010-02-13 20:02 ` ST
0 siblings, 0 replies; 9+ messages in thread
From: ST @ 2010-02-13 20:02 UTC (permalink / raw)
To: Robert Hancock; +Cc: linux-kernel
Hi Robert and lkml
> Do you have CONFIG_SCSI_MULTI_LUN=y set in your kernel configuration?
Ah, hit the nail right on the head. Thank you very much! So if you happen to
be close to Darmstadt: I owe you a drink just drop me a mail.
To spare others this torment not to be able to configure their on kernel (well
at least partially) please change the defconfig to have CONFIG_SCSI_MULTI_LUN
enabled. Given the low price of these usb multi card readers this is quite a
common use case?
Best regards
ST
Signed-off-by: ST <st@iss.tu-darmstadt.de>
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index d28fad1..053e8bf 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -847,7 +847,7 @@ CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index 6c86acd..3f64c27 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -842,7 +842,7 @@ CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
-# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-02-13 20:02 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-02-09 22:06 2.6.33-rc7 problems ST
2010-02-10 23:40 ` 2.6.33-rc7 problems usb CF ST
2010-02-11 0:52 ` 2.6.33-rc7 problems Robert Hancock
2010-02-11 21:11 ` ST
2010-02-11 22:54 ` ST
2010-02-12 1:49 ` Robert Hancock
2010-02-12 23:18 ` ST
2010-02-13 1:14 ` Robert Hancock
2010-02-13 20:02 ` PATCH was " ST
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox