[PATCH] eeepc-laptop: check wireless hotplug events

[Alan Jenkins <alan-jenkins@tuffmail.co.uk>]

Before we mark the wireless device as unplugged, check PCI config space
to see whether the wireless device is really disabled (and vice versa).
This works around newer models which don't want the hotplug code, where
we end up disabling the wired network device.

My old 701 still works correctly with this.  I can also simulate an
afflicted model by changing the hardcoded PCI bus/slot number in the
driver, and it seems to work nicely (although it is a bit noisy).

In future this type of hotplug support will be implemented by the PCI
core.  The existing blacklist and the new warning message will be
removed at that point.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>

diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 6a47bb7..9a844ca 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -578,6 +578,8 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
 	struct pci_dev *dev;
 	struct pci_bus *bus;
 	bool blocked = eeepc_wlan_rfkill_blocked(eeepc);
+	bool absent;
+	u32 l;
 
 	if (eeepc->wlan_rfkill)
 		rfkill_set_sw_state(eeepc->wlan_rfkill, blocked);
@@ -591,6 +593,22 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
 			goto out_unlock;
 		}
 
+		if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) {
+			pr_err("Unable to read PCI config space?\n");
+			goto out_unlock;
+		}
+		absent = (l == 0xffffffff);
+
+		if (blocked != absent) {
+			pr_warning("BIOS says wireless lan is %s, "
+					"but the pci device is %s\n",
+				blocked ? "blocked" : "unblocked",
+				absent ? "absent" : "present");
+			pr_warning("skipped wireless hotplug as probably "
+					"inappropriate for this model\n");
+			goto out_unlock;
+		}
+
 		if (!blocked) {
 			dev = pci_get_slot(bus, 0);
 			if (dev) {