From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751744Ab0CATN3 (ORCPT ); Mon, 1 Mar 2010 14:13:29 -0500 Received: from pindarots.xs4all.nl ([80.101.128.228]:53048 "EHLO pindarots.xs4all.nl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751601Ab0CATN1 (ORCPT ); Mon, 1 Mar 2010 14:13:27 -0500 X-Greylist: delayed 3131 seconds by postgrey-1.27 at vger.kernel.org; Mon, 01 Mar 2010 14:13:27 EST Message-ID: <4B8C0598.2060000@xs4all.nl> Date: Mon, 01 Mar 2010 19:21:12 +0100 From: Udo van den Heuvel User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.7) Gecko/20100120 Fedora/3.0.1-1.fc12 Lightning/1.0b2pre Thunderbird/3.0.1 MIME-Version: 1.0 To: linux-kernel@vger.kernel.org Subject: 2.6.33 on jetway nc81-lf board X-Enigmail-Version: 1.0.1 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Hello, I just compiled 2.6.33 on a Jetway NC81-LF board with AMD 235E CPU. While trying to get lm_sensors to work I get in dmesg stuff like: f71882fg: Found f71862fg chip at 0x220, revision 18 ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region IP__ [0x225-0x226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver No other sensor-related modules are loaded. What could be wrong? # lspci 00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge 00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx) 00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0) 00:05.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 1) 00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] 00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller 00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller 00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a) 00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller 00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] HyperTransport Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Miscellaneous Control 00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h [Opteron, Athlon64, Sempron] Link Control 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon HD 3200 Graphics 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) # dmesg|grep -i acpi BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS) BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data) ACPI: RSDP 00000000000f83d0 00024 (v02 RS780 ) ACPI: XSDT 00000000bffe3080 0004C (v01 RS780 AWRDACPI 42302E31 AWRD 00000000) ACPI: FACP 00000000bffea480 000F4 (v03 RS780 AWRDACPI 42302E31 AWRD 00000000) ACPI: DSDT 00000000bffe3200 0724B (v01 RS780 AWRDACPI 00001000 MSFT 03000000) ACPI: FACS 00000000bffe0000 00040 ACPI: SSDT 00000000bffea640 0095E (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000bffeafc0 00038 (v01 RS780 AWRDACPI 42302E31 AWRD 00000098) ACPI: MCFG 00000000bffeb000 0003C (v01 RS780 AWRDACPI 42302E31 AWRD 00000000) ACPI: APIC 00000000bffea580 00084 (v01 RS780 AWRDACPI 42302E31 AWRD 00000000) ACPI: Local APIC address 0xfee00000 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 ACPI: Core revision 20091214 ACPI: bus type pci registered ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20091214/nspredef-1040) ACPI: Expecting a [Reference] package element, found type 0 ACPI: Invalid passive threshold ACPI: Thermal Zone [THRM] (40 C) ACPI: Power Button [PWRB] ACPI: Power Button [PWRF] ACPI: Fan [FAN] (on) ACPI: I/O resource f71882fg [0x220-0x227] conflicts with ACPI region IP__ [0x225-0x226] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver (etc) Udo