From: Etienne Basset <etienne.basset@numericable.fr>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-ide@vger.kernel.org
Subject: [2.6.34-rc1][libata] regression?
Date: Tue, 09 Mar 2010 22:47:46 +0100 [thread overview]
Message-ID: <4B96C202.6050606@numericable.fr> (raw)
hello,
with .34-rc1 i see some "stalls"; systems is frozen for say 30seconds, then comes backs to life
The only clue i have is strange ATA logs that I didn't have before, see below.
My disk may be dying, it's 6 years old, but i shows the messages only in .34-rc1, never in .33 or .32
If the stalls are unrelated to ata, how could I debug that with perf? i got lots of 'WARNING: failed to keep up with mmap data' when using perf top....
'
thx
Etienne
lscpi
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
cat /var/log/messages
Mar 9 21:13:08 etienne-desktop kernel: ata1: clearing spurious IRQ
Mar 9 21:13:38 etienne-desktop kernel: ata1: lost interrupt (Status 0x50)
Mar 9 21:13:38 etienne-desktop kernel: ata1: soft resetting link
Mar 9 21:13:39 etienne-desktop kernel: ata1.00: configured for UDMA/133
Mar 9 21:13:39 etienne-desktop kernel: ata1.00: device reported invalid CHS sector 0
Mar 9 21:13:39 etienne-desktop kernel: ata1: EH complete
Mar 9 21:19:01 etienne-desktop kernel: ata1: clearing spurious IRQ
Mar 9 21:19:31 etienne-desktop kernel: ata1: lost interrupt (Status 0x50)
Mar 9 21:19:31 etienne-desktop kernel: ata1: soft resetting link
Mar 9 21:19:32 etienne-desktop kernel: ata1.00: configured for UDMA/133
Mar 9 21:19:32 etienne-desktop kernel: ata1.00: device reported invalid CHS sector 0
Mar 9 21:19:32 etienne-desktop kernel: ata1: EH complete
dmesg
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
ata1.00: ATA-6: ST3160023AS, 8.05, max UDMA/133
ata1.00: 312581808 sectors, multi 8: LBA48
ata1.00: configured for UDMA/133
next reply other threads:[~2010-03-09 21:56 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-09 21:47 Etienne Basset [this message]
2010-03-16 20:04 ` [2.6.34-rc1][libata] regression? Maciej Rutecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B96C202.6050606@numericable.fr \
--to=etienne.basset@numericable.fr \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox