[2.6.34-rc1][libata] regression?

[2.6.34-rc1][libata] regression?

[Etienne Basset]

hello,


with .34-rc1 i see some "stalls"; systems is frozen for say 30seconds, then comes backs to life
The only clue i have is strange ATA logs that I didn't have before, see below.
My disk may be dying, it's 6 years old, but i shows the messages only in .34-rc1, never in .33 or .32

If the stalls are unrelated to ata, how could I debug that with perf? i got lots of 'WARNING: failed to keep up with mmap data' when using perf top....
'

thx
Etienne

lscpi
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
                                                        
cat /var/log/messages
Mar  9 21:13:08 etienne-desktop kernel: ata1: clearing spurious IRQ
Mar  9 21:13:38 etienne-desktop kernel: ata1: lost interrupt (Status 0x50)
Mar  9 21:13:38 etienne-desktop kernel: ata1: soft resetting link
Mar  9 21:13:39 etienne-desktop kernel: ata1.00: configured for UDMA/133
Mar  9 21:13:39 etienne-desktop kernel: ata1.00: device reported invalid CHS sector 0
Mar  9 21:13:39 etienne-desktop kernel: ata1: EH complete
Mar  9 21:19:01 etienne-desktop kernel: ata1: clearing spurious IRQ
Mar  9 21:19:31 etienne-desktop kernel: ata1: lost interrupt (Status 0x50)
Mar  9 21:19:31 etienne-desktop kernel: ata1: soft resetting link
Mar  9 21:19:32 etienne-desktop kernel: ata1.00: configured for UDMA/133
Mar  9 21:19:32 etienne-desktop kernel: ata1.00: device reported invalid CHS sector 0
Mar  9 21:19:32 etienne-desktop kernel: ata1: EH complete

dmesg
libata version 3.00 loaded.                                                                                     
ata_piix 0000:00:1f.2: version 2.13                                                                             
ata_piix 0000:00:1f.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20                                               
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]                                                                      
ata_piix 0000:00:1f.2: setting latency timer to 64                                                              
scsi0 : ata_piix                                                                                                
scsi1 : ata_piix                                                                                                
ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20                                               
ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
ata1.00: ATA-6: ST3160023AS, 8.05, max UDMA/133
ata1.00: 312581808 sectors, multi 8: LBA48
ata1.00: configured for UDMA/133

Re: [2.6.34-rc1][libata] regression?

[Maciej Rutecki]

On wtorek, 9 marca 2010 o 22:47:46 Etienne Basset wrote:
> hello,
> 
> 
> with .34-rc1 i see some "stalls"; systems is frozen for say 30seconds, then
>  comes backs to life The only clue i have is strange ATA logs that I didn't
>  have before, see below. My disk may be dying, it's 6 years old, but i
>  shows the messages only in .34-rc1, never in .33 or .32
> 
I created a Bugzilla entry at http://bugzilla.kernel.org/show_bug.cgi?id=15549
for your bug report, please add your address to the CC list in there, thanks!

-- 
Maciej Rutecki
http://www.maciek.unixy.pl