* ata1 timeouts on 2.6.34-rc1
@ 2010-03-10 10:08 Zeno Davatz
2010-03-10 14:31 ` Jeff Garzik
0 siblings, 1 reply; 7+ messages in thread
From: Zeno Davatz @ 2010-03-10 10:08 UTC (permalink / raw)
To: linux-kernel
I am on 2.6.34-r1 and I get the same ATA timeouts as Linus gets here:
http://lkml.org/lkml/2010/3/9/345
ata1: clearing spurious IRQ
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: WRITE DMA
ata1.00: cmd ca/00:08:75:98:89/00:00:00:00:00/e3 tag 0 dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
ata1: clearing spurious IRQ
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:5d:ba:7b/00:00:00:00:00/e4 tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
ata1: clearing spurious IRQ
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:7d:7b:7d/00:00:00:00:00/e4 tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
ata1: clearing spurious IRQ
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:1d:a2:68/00:00:00:00:00/ea tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
I am also on an Intel SSD (160 GB). Every timeout blocks my PC for some seconds.
Best
Zeno
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: ata1 timeouts on 2.6.34-rc1 2010-03-10 10:08 ata1 timeouts on 2.6.34-rc1 Zeno Davatz @ 2010-03-10 14:31 ` Jeff Garzik 2010-03-10 15:41 ` Zeno Davatz 0 siblings, 1 reply; 7+ messages in thread From: Jeff Garzik @ 2010-03-10 14:31 UTC (permalink / raw) To: Zeno Davatz; +Cc: linux-kernel On 03/10/2010 05:08 AM, Zeno Davatz wrote: > I am also on an Intel SSD (160 GB). Every timeout blocks my PC for some seconds. PLEASE provide full information standard to any bug report. Just posting that you have a timeout tells us nothing about the hardware involved. lspci and full dmesg output is needed, at a minimum. Jeff ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1 2010-03-10 14:31 ` Jeff Garzik @ 2010-03-10 15:41 ` Zeno Davatz 2010-03-10 16:30 ` Jeff Garzik 0 siblings, 1 reply; 7+ messages in thread From: Zeno Davatz @ 2010-03-10 15:41 UTC (permalink / raw) To: Jeff Garzik; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 4746 bytes --] On Wed, Mar 10, 2010 at 3:31 PM, Jeff Garzik <jeff@garzik.org> wrote: > On 03/10/2010 05:08 AM, Zeno Davatz wrote: >> >> I am also on an Intel SSD (160 GB). Every timeout blocks my PC for some >> seconds. > > > PLEASE provide full information standard to any bug report. Just posting > that you have a timeout tells us nothing about the hardware involved. > > lspci and full dmesg output is needed, at a minimum. lspci: 00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 0e) 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 0e) 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 05) 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 05) 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 05) 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 05) 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 05) 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5) 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 05) 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 05) 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 05) 02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 02:06.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05) /var/log/messages Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno ; USER=root ; COMMAND=/usr/bin/emerge --sync Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50) Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA Mar 10 13:34:19 zenogentoo ata1.00: cmd c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY } Mar 10 13:34:19 zenogentoo ata1: soft resetting link Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133 Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0 Mar 10 13:34:19 zenogentoo ata1: EH complete Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50) Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA Mar 10 13:36:26 zenogentoo ata1.00: cmd ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY } Mar 10 13:36:26 zenogentoo ata1: soft resetting link Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133 Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0 Mar 10 13:36:26 zenogentoo ata1: EH complete Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons ) Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno ; USER=root ; COMMAND=/usr/bin/emerge portage Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50) Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA Mar 10 13:49:53 zenogentoo ata1.00: cmd ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY } Mar 10 13:49:53 zenogentoo ata1: soft resetting link Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133 Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0 Mar 10 13:49:53 zenogentoo ata1: EH complete Let me know if I can supply you with anymore information. Also see attached lspci-v file. Best Zeno [-- Attachment #2: lspci-v --] [-- Type: application/octet-stream, Size: 5762 bytes --] 00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 0e) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 0e) (prog-if 00 [VGA controller]) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fbe80000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at fbe40000 (32-bit, non-prefetchable) [size=256K] Capabilities: [d0] Power Management version 2 Kernel driver in use: i915 00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 05) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, fast devsel, latency 0, IRQ 10 Memory at fbe38000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel <?> Capabilities: [130] Root Complex Link <?> 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 05) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, medium devsel, latency 0, IRQ 23 I/O ports at d880 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 05) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, medium devsel, latency 0, IRQ 19 I/O ports at d800 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 05) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at d480 [size=32] Kernel driver in use: uhci_hcd 00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 05) (prog-if 00 [UHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, medium devsel, latency 0, IRQ 16 I/O ports at d400 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 05) (prog-if 20 [EHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at fbe37c00 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5) (prog-if 01 [Subtractive decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Capabilities: [50] Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 05) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, medium devsel, latency 0 00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 05) (prog-if 8a [Master SecP PriP]) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, medium devsel, latency 0, IRQ 18 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at ffa0 [size=16] Kernel driver in use: PIIX_IDE 00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19 I/O ports at d080 [size=8] I/O ports at d000 [size=4] I/O ports at cc00 [size=8] I/O ports at c880 [size=4] I/O ports at c800 [size=16] Capabilities: [70] Power Management version 2 Kernel driver in use: ata_piix 00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 05) Subsystem: Micro-Star International Co., Ltd. Unknown device 1370 Flags: medium devsel, IRQ 10 I/O ports at 0400 [size=32] 02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI]) Subsystem: Micro-Star International Co., Ltd. Unknown device 0122 Flags: bus master, medium devsel, latency 64, IRQ 19 Memory at fbfff800 (32-bit, non-prefetchable) [size=2K] I/O ports at ec00 [size=128] Capabilities: [50] Power Management version 2 Kernel driver in use: ohci1394 02:06.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05) Subsystem: Micro-Star International Co., Ltd. Unknown device 822c Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18 Memory at fbfc0000 (32-bit, non-prefetchable) [size=128K] Memory at fbfa0000 (32-bit, non-prefetchable) [size=128K] I/O ports at e880 [size=64] Expansion ROM at fbf80000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Capabilities: [e4] PCI-X non-bridge device Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Kernel driver in use: e1000 ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1 2010-03-10 15:41 ` Zeno Davatz @ 2010-03-10 16:30 ` Jeff Garzik 2010-03-10 17:43 ` Zeno Davatz 0 siblings, 1 reply; 7+ messages in thread From: Jeff Garzik @ 2010-03-10 16:30 UTC (permalink / raw) To: Zeno Davatz; +Cc: linux-kernel On 03/10/2010 10:41 AM, Zeno Davatz wrote: > Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x > /usr/sbin/run-crons&& /usr/sbin/run-crons ) > Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno > ; USER=root ; COMMAND=/usr/bin/emerge --sync > Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ > Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50) > Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr > 0x0 action 0x6 frozen > Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA > Mar 10 13:34:19 zenogentoo ata1.00: cmd > c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in > Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 > Emask 0x4 (timeout) > Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY } > Mar 10 13:34:19 zenogentoo ata1: soft resetting link > Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133 > Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0 > Mar 10 13:34:19 zenogentoo ata1: EH complete > Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ > Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50) > Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr > 0x0 action 0x6 frozen > Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA > Mar 10 13:36:26 zenogentoo ata1.00: cmd > ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out > Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 > Emask 0x4 (timeout) > Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY } > Mar 10 13:36:26 zenogentoo ata1: soft resetting link > Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133 > Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0 > Mar 10 13:36:26 zenogentoo ata1: EH complete > Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x > /usr/sbin/run-crons&& /usr/sbin/run-crons ) > Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno > ; USER=root ; COMMAND=/usr/bin/emerge portage > Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ > Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50) > Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr > 0x0 action 0x6 frozen > Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA > Mar 10 13:49:53 zenogentoo ata1.00: cmd > ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out > Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 > Emask 0x4 (timeout) > Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY } > Mar 10 13:49:53 zenogentoo ata1: soft resetting link > Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133 > Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0 > Mar 10 13:49:53 zenogentoo ata1: EH complete > > Let me know if I can supply you with anymore information. Also see > attached lspci-v file. > need full dmesg from boot, not just error snippet. Jeff ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1 2010-03-10 16:30 ` Jeff Garzik @ 2010-03-10 17:43 ` Zeno Davatz 2010-03-10 18:37 ` Jeff Garzik 0 siblings, 1 reply; 7+ messages in thread From: Zeno Davatz @ 2010-03-10 17:43 UTC (permalink / raw) To: Jeff Garzik; +Cc: linux-kernel On Wed, Mar 10, 2010 at 5:30 PM, Jeff Garzik <jeff@garzik.org> wrote: > On 03/10/2010 10:41 AM, Zeno Davatz wrote: >> >> Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x >> /usr/sbin/run-crons&& /usr/sbin/run-crons ) >> Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno >> ; USER=root ; COMMAND=/usr/bin/emerge --sync >> Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ >> Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50) >> Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >> 0x0 action 0x6 frozen >> Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA >> Mar 10 13:34:19 zenogentoo ata1.00: cmd >> c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in >> Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >> Emask 0x4 (timeout) >> Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY } >> Mar 10 13:34:19 zenogentoo ata1: soft resetting link >> Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133 >> Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0 >> Mar 10 13:34:19 zenogentoo ata1: EH complete >> Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ >> Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50) >> Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >> 0x0 action 0x6 frozen >> Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA >> Mar 10 13:36:26 zenogentoo ata1.00: cmd >> ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out >> Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >> Emask 0x4 (timeout) >> Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY } >> Mar 10 13:36:26 zenogentoo ata1: soft resetting link >> Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133 >> Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0 >> Mar 10 13:36:26 zenogentoo ata1: EH complete >> Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x >> /usr/sbin/run-crons&& /usr/sbin/run-crons ) >> Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno >> ; USER=root ; COMMAND=/usr/bin/emerge portage >> Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ >> Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50) >> Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >> 0x0 action 0x6 frozen >> Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA >> Mar 10 13:49:53 zenogentoo ata1.00: cmd >> ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out >> Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >> Emask 0x4 (timeout) >> Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY } >> Mar 10 13:49:53 zenogentoo ata1: soft resetting link >> Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133 >> Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0 >> Mar 10 13:49:53 zenogentoo ata1: EH complete >> >> Let me know if I can supply you with anymore information. Also see >> attached lspci-v file. >> > need full dmesg from boot, not just error snippet. This is the first message I get after boot that concerns ata: Mar 10 08:11:13 zenogentoo ata1: clearing spurious IRQ Mar 10 08:11:44 zenogentoo ata1: lost interrupt (Status 0x50) Mar 10 08:11:44 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Mar 10 08:11:44 zenogentoo ata1.00: failed command: WRITE DMA Mar 10 08:11:44 zenogentoo ata1.00: cmd ca/00:08:75:98:89/00:00:00:00:00/e3 tag 0 dma 4096 out Mar 10 08:11:44 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Mar 10 08:11:44 zenogentoo ata1.00: status: { DRDY } Mar 10 08:11:44 zenogentoo ata1: soft resetting link Mar 10 08:11:44 zenogentoo ata1.00: configured for UDMA/133 Mar 10 08:11:44 zenogentoo ata1.00: device reported invalid CHS sector 0 Mar 10 08:11:44 zenogentoo ata1: EH complete and then it continues with: Mar 10 08:26:14 zenogentoo ata1: clearing spurious IRQ Mar 10 08:26:44 zenogentoo ata1: lost interrupt (Status 0x50) Mar 10 08:26:44 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Mar 10 08:26:44 zenogentoo ata1.00: failed command: READ DMA Mar 10 08:26:44 zenogentoo ata1.00: cmd c8/00:00:5d:ba:7b/00:00:00:00:00/e4 tag 0 dma 131072 in Mar 10 08:26:44 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Mar 10 08:26:44 zenogentoo ata1.00: status: { DRDY } Mar 10 08:26:44 zenogentoo ata1: soft resetting link Mar 10 08:26:44 zenogentoo ata1.00: configured for UDMA/133 Mar 10 08:26:44 zenogentoo ata1.00: device reported invalid CHS sector 0 Mar 10 08:26:44 zenogentoo ata1: EH complete and so on: Mar 10 09:35:56 zenogentoo ata1: clearing spurious IRQ Mar 10 09:36:27 zenogentoo ata1: lost interrupt (Status 0x50) Mar 10 09:36:27 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Mar 10 09:36:27 zenogentoo ata1.00: failed command: READ DMA Mar 10 09:36:27 zenogentoo ata1.00: cmd c8/00:00:7d:7b:7d/00:00:00:00:00/e4 tag 0 dma 131072 in Mar 10 09:36:27 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Mar 10 09:36:27 zenogentoo ata1.00: status: { DRDY } Mar 10 09:36:27 zenogentoo ata1: soft resetting link Mar 10 09:36:27 zenogentoo ata1.00: configured for UDMA/133 Mar 10 09:36:27 zenogentoo ata1.00: device reported invalid CHS sector 0 Mar 10 09:36:27 zenogentoo ata1: EH complete I can send you my complete /var/log/messages file if you want. Best Zeno ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1 2010-03-10 17:43 ` Zeno Davatz @ 2010-03-10 18:37 ` Jeff Garzik 2010-03-10 19:52 ` Zeno Davatz 0 siblings, 1 reply; 7+ messages in thread From: Jeff Garzik @ 2010-03-10 18:37 UTC (permalink / raw) To: Zeno Davatz; +Cc: linux-kernel On 03/10/2010 12:43 PM, Zeno Davatz wrote: > On Wed, Mar 10, 2010 at 5:30 PM, Jeff Garzik<jeff@garzik.org> wrote: >> On 03/10/2010 10:41 AM, Zeno Davatz wrote: >>> >>> Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x >>> /usr/sbin/run-crons&& /usr/sbin/run-crons ) >>> Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno >>> ; USER=root ; COMMAND=/usr/bin/emerge --sync >>> Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ >>> Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50) >>> Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >>> 0x0 action 0x6 frozen >>> Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA >>> Mar 10 13:34:19 zenogentoo ata1.00: cmd >>> c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in >>> Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >>> Emask 0x4 (timeout) >>> Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY } >>> Mar 10 13:34:19 zenogentoo ata1: soft resetting link >>> Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133 >>> Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0 >>> Mar 10 13:34:19 zenogentoo ata1: EH complete >>> Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ >>> Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50) >>> Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >>> 0x0 action 0x6 frozen >>> Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA >>> Mar 10 13:36:26 zenogentoo ata1.00: cmd >>> ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out >>> Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >>> Emask 0x4 (timeout) >>> Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY } >>> Mar 10 13:36:26 zenogentoo ata1: soft resetting link >>> Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133 >>> Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0 >>> Mar 10 13:36:26 zenogentoo ata1: EH complete >>> Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x >>> /usr/sbin/run-crons&& /usr/sbin/run-crons ) >>> Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno >>> ; USER=root ; COMMAND=/usr/bin/emerge portage >>> Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ >>> Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50) >>> Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >>> 0x0 action 0x6 frozen >>> Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA >>> Mar 10 13:49:53 zenogentoo ata1.00: cmd >>> ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out >>> Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >>> Emask 0x4 (timeout) >>> Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY } >>> Mar 10 13:49:53 zenogentoo ata1: soft resetting link >>> Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133 >>> Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0 >>> Mar 10 13:49:53 zenogentoo ata1: EH complete >>> >>> Let me know if I can supply you with anymore information. Also see >>> attached lspci-v file. >>> >> need full dmesg from boot, not just error snippet. > > This is the first message I get after boot that concerns ata: Not -after- boot, full dmesg including boot, please. Run /bin/dmesg just after booting. Jeff ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1 2010-03-10 18:37 ` Jeff Garzik @ 2010-03-10 19:52 ` Zeno Davatz 0 siblings, 0 replies; 7+ messages in thread From: Zeno Davatz @ 2010-03-10 19:52 UTC (permalink / raw) To: Jeff Garzik; +Cc: linux-kernel [-- Attachment #1: Type: text/plain, Size: 3605 bytes --] On Wed, Mar 10, 2010 at 7:37 PM, Jeff Garzik <jeff@garzik.org> wrote: > On 03/10/2010 12:43 PM, Zeno Davatz wrote: >> >> On Wed, Mar 10, 2010 at 5:30 PM, Jeff Garzik<jeff@garzik.org> wrote: >>> >>> On 03/10/2010 10:41 AM, Zeno Davatz wrote: >>>> >>>> Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x >>>> /usr/sbin/run-crons&& /usr/sbin/run-crons ) >>>> Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno >>>> ; USER=root ; COMMAND=/usr/bin/emerge --sync >>>> Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ >>>> Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50) >>>> Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >>>> 0x0 action 0x6 frozen >>>> Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA >>>> Mar 10 13:34:19 zenogentoo ata1.00: cmd >>>> c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in >>>> Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >>>> Emask 0x4 (timeout) >>>> Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY } >>>> Mar 10 13:34:19 zenogentoo ata1: soft resetting link >>>> Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133 >>>> Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0 >>>> Mar 10 13:34:19 zenogentoo ata1: EH complete >>>> Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ >>>> Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50) >>>> Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >>>> 0x0 action 0x6 frozen >>>> Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA >>>> Mar 10 13:36:26 zenogentoo ata1.00: cmd >>>> ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out >>>> Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >>>> Emask 0x4 (timeout) >>>> Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY } >>>> Mar 10 13:36:26 zenogentoo ata1: soft resetting link >>>> Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133 >>>> Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0 >>>> Mar 10 13:36:26 zenogentoo ata1: EH complete >>>> Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x >>>> /usr/sbin/run-crons&& /usr/sbin/run-crons ) >>>> Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno >>>> ; USER=root ; COMMAND=/usr/bin/emerge portage >>>> Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ >>>> Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50) >>>> Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr >>>> 0x0 action 0x6 frozen >>>> Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA >>>> Mar 10 13:49:53 zenogentoo ata1.00: cmd >>>> ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out >>>> Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00 >>>> Emask 0x4 (timeout) >>>> Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY } >>>> Mar 10 13:49:53 zenogentoo ata1: soft resetting link >>>> Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133 >>>> Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0 >>>> Mar 10 13:49:53 zenogentoo ata1: EH complete >>>> >>>> Let me know if I can supply you with anymore information. Also see >>>> attached lspci-v file. >>>> >>> need full dmesg from boot, not just error snippet. >> >> This is the first message I get after boot that concerns ata: > > Not -after- boot, full dmesg including boot, please. Run /bin/dmesg just > after booting. Ok, thanks for the tip, see attachment. Best Zeno [-- Attachment #2: dmesg --] [-- Type: application/octet-stream, Size: 15771 bytes --] t [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI Warning: Incorrect checksum in table [OEMB] - 0A, should be 07 (20100121/tbutils-314) ACPI: No dock devices found. PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xffffffff] (ignored) pci 0000:00:02.0: reg 10: [mem 0xfbe80000-0xfbefffff] pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref] pci 0000:00:02.0: reg 1c: [mem 0xfbe40000-0xfbe7ffff] pci 0000:00:1b.0: reg 10: [mem 0xfbe38000-0xfbe3bfff 64bit] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1d.0: reg 20: [io 0xd880-0xd89f] pci 0000:00:1d.1: reg 20: [io 0xd800-0xd81f] pci 0000:00:1d.2: reg 20: [io 0xd480-0xd49f] pci 0000:00:1d.3: reg 20: [io 0xd400-0xd41f] pci 0000:00:1d.7: reg 10: [mem 0xfbe37c00-0xfbe37fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087] pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003] pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07] pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883] pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] pci 0000:02:03.0: reg 10: [mem 0xfbfff800-0xfbffffff] pci 0000:02:03.0: reg 14: [io 0xec00-0xec7f] pci 0000:02:03.0: supports D2 pci 0000:02:03.0: PME# supported from D2 D3hot D3cold pci 0000:02:03.0: PME# disabled pci 0000:02:06.0: reg 10: [mem 0xfbfc0000-0xfbfdffff] pci 0000:02:06.0: reg 14: [mem 0xfbfa0000-0xfbfbffff] pci 0000:02:06.0: reg 18: [io 0xe880-0xe8bf] pci 0000:02:06.0: reg 30: [mem 0xfbf80000-0xfbf9ffff pref] pci 0000:02:06.0: PME# supported from D0 D3hot D3cold pci 0000:02:06.0: PME# disabled pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:1e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.22.1. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009fc00 - 000000000009ffff reserve RAM buffer: 000000007f7d0000 - 000000007fffffff hpet clockevent registered Switching to clocksource tsc Slow work thread pool: Starting up Slow work thread pool: Ready FS-Cache: Loaded CacheFiles: Loaded pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved system 00:08: [io 0x0680-0x06ff] has been reserved system 00:08: [io 0x0295-0x0296] has been reserved system 00:09: [io 0x04d0-0x04d1] has been reserved system 00:09: [io 0x0800-0x087f] has been reserved system 00:09: [io 0x0480-0x04bf] has been reserved system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved system 00:0b: [mem 0xffc00000-0xfff7ffff] has been reserved system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved system 00:0f: [mem 0x00100000-0x7f7fffff] could not be reserved PCI: max bus depth: 1 pci_try_num: 2 pci 0000:00:1e.0: PCI bridge to [bus 02-02] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device PCI: CLS 32 bytes, default 64 kvm: no hardware support highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.29 [Flags: R/W DEBUG]. JFS: nTxBlock = 8192, nTxLock = 65536 msgmni has been set to 1727 io scheduler noop registered (default) io scheduler deadline registered io scheduler cfq registered input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 ACPI: Power Button [PWRF] lp: driver loaded but no devices found Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 915G Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 [drm] set up 7M of stolen space Switched to NOHz mode on CPU #0 Switched to NOHz mode on CPU #1 [drm] initialized overlay support Console: switching to colour frame buffer device 160x64 fb0: inteldrmfb frame buffer device registered panic notifier [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A floppy0: no floppy controllers found loop: module loaded Uniform Multi-Platform E-IDE driver piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x05) PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 piix 0000:00:1f.1: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7 ide1: BM-DMA at 0xffa8-0xffaf Probing IDE interface ide0... hda: LITE-ON DVDRW SHW-1635S, ATAPI CD/DVD-ROM drive hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/66 mode selected Probing IDE interface ide1... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports ide-gd driver 1.18 ide-cd driver 5.00 ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19 ata2: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19 Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Copyright (c) 1999-2006 Intel Corporation. e1000 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ata1.00: ATA-7: INTEL SSDSA2MH160G1GC, 045C8820, max UDMA/133 ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/31) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2MH16 045C PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA e1000: 0000:02:06.0: e1000_probe: (PCI:33MHz:32-bit) 00:13:d3:b4:3c:6c sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> ohci1394 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fbfff800-fbffffff] Max Packet=[2048] IR/IT contexts=[4/8] ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe37c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.3: setting latency timer to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for symbol usbcore: registered new interface driver symbol USB Serial support registered for Handspring Visor / Palm OS USB Serial support registered for Sony Clie 3.5 USB Serial support registered for Sony Clie 5.0 usbcore: registered new interface driver visor visor: USB HandSpring Visor / Palm OS driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver usbcore: registered new interface driver snd-usb-audio ALSA device list: No soundcards found. oprofile: using NMI interrupt. TCP cubic registered NET: Registered protocol family 17 Bridge firewalling registered Using IPI No-Shortcut mode kmemleak: Kernel memory leak detector initialized kmemleak: Automatic memory scanning thread started UDF-fs: No partition found (1) VFS: Mounted root (jfs filesystem) readonly on device 8:3. Freeing unused kernel memory: 432k freed usb 2-2: new full speed USB device using uhci_hcd and address 2 input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.3/input/input2 generic-usb 0003:046D:0A01.0001: input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2/input3 udev: starting version 135 ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc00c7cc9c] usb 3-1: new low speed USB device using uhci_hcd and address 2 input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3 generic-usb 0003:046D:C00C.0002: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0 usb 3-2: new full speed USB device using uhci_hcd and address 3 hub 3-2:1.0: USB hub found hub 3-2:1.0: 4 ports detected usb 3-2.2: new full speed USB device using uhci_hcd and address 4 input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/input/input4 generic-usb 0003:05F3:0007.0003: input: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:1d.1-2.2/input0 input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.1/input/input5 generic-usb 0003:05F3:0007.0004: input: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:1d.1-2.2/input1 Adding 192776k swap on /dev/sda2. Priority:-1 extents:1 across:192776k SS e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-03-10 19:52 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2010-03-10 10:08 ata1 timeouts on 2.6.34-rc1 Zeno Davatz 2010-03-10 14:31 ` Jeff Garzik 2010-03-10 15:41 ` Zeno Davatz 2010-03-10 16:30 ` Jeff Garzik 2010-03-10 17:43 ` Zeno Davatz 2010-03-10 18:37 ` Jeff Garzik 2010-03-10 19:52 ` Zeno Davatz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox