* ata1 timeouts on 2.6.34-rc1
@ 2010-03-10 10:08 Zeno Davatz
2010-03-10 14:31 ` Jeff Garzik
0 siblings, 1 reply; 7+ messages in thread
From: Zeno Davatz @ 2010-03-10 10:08 UTC (permalink / raw)
To: linux-kernel
I am on 2.6.34-r1 and I get the same ATA timeouts as Linus gets here:
http://lkml.org/lkml/2010/3/9/345
ata1: clearing spurious IRQ
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: WRITE DMA
ata1.00: cmd ca/00:08:75:98:89/00:00:00:00:00/e3 tag 0 dma 4096 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
ata1: clearing spurious IRQ
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:5d:ba:7b/00:00:00:00:00/e4 tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
ata1: clearing spurious IRQ
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:7d:7b:7d/00:00:00:00:00/e4 tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
ata1: clearing spurious IRQ
ata1: lost interrupt (Status 0x50)
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:00:1d:a2:68/00:00:00:00:00/ea tag 0 dma 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata1.00: status: { DRDY }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1.00: device reported invalid CHS sector 0
ata1: EH complete
I am also on an Intel SSD (160 GB). Every timeout blocks my PC for some seconds.
Best
Zeno
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1
2010-03-10 10:08 ata1 timeouts on 2.6.34-rc1 Zeno Davatz
@ 2010-03-10 14:31 ` Jeff Garzik
2010-03-10 15:41 ` Zeno Davatz
0 siblings, 1 reply; 7+ messages in thread
From: Jeff Garzik @ 2010-03-10 14:31 UTC (permalink / raw)
To: Zeno Davatz; +Cc: linux-kernel
On 03/10/2010 05:08 AM, Zeno Davatz wrote:
> I am also on an Intel SSD (160 GB). Every timeout blocks my PC for some seconds.
PLEASE provide full information standard to any bug report. Just
posting that you have a timeout tells us nothing about the hardware
involved.
lspci and full dmesg output is needed, at a minimum.
Jeff
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1
2010-03-10 14:31 ` Jeff Garzik
@ 2010-03-10 15:41 ` Zeno Davatz
2010-03-10 16:30 ` Jeff Garzik
0 siblings, 1 reply; 7+ messages in thread
From: Zeno Davatz @ 2010-03-10 15:41 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 4746 bytes --]
On Wed, Mar 10, 2010 at 3:31 PM, Jeff Garzik <jeff@garzik.org> wrote:
> On 03/10/2010 05:08 AM, Zeno Davatz wrote:
>>
>> I am also on an Intel SSD (160 GB). Every timeout blocks my PC for some
>> seconds.
>
>
> PLEASE provide full information standard to any bug report. Just posting
> that you have a timeout tells us nothing about the hardware involved.
>
> lspci and full dmesg output is needed, at a minimum.
lspci:
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory
Controller Hub (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL
Integrated Graphics Controller (rev 0e)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) High Definition Audio Controller (rev 05)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 05)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 05)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 05)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 05)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC
Interface Bridge (rev 05)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) IDE Controller (rev 05)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA
Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
SMBus Controller (rev 05)
02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 80)
02:06.0 Ethernet controller: Intel Corporation 82541GI Gigabit
Ethernet Controller (rev 05)
/var/log/messages
Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x
/usr/sbin/run-crons && /usr/sbin/run-crons )
Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
; USER=root ; COMMAND=/usr/bin/emerge --sync
Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ
Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50)
Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x6 frozen
Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA
Mar 10 13:34:19 zenogentoo ata1.00: cmd
c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in
Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
Emask 0x4 (timeout)
Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY }
Mar 10 13:34:19 zenogentoo ata1: soft resetting link
Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133
Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0
Mar 10 13:34:19 zenogentoo ata1: EH complete
Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ
Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50)
Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x6 frozen
Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA
Mar 10 13:36:26 zenogentoo ata1.00: cmd
ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out
Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
Emask 0x4 (timeout)
Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY }
Mar 10 13:36:26 zenogentoo ata1: soft resetting link
Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133
Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0
Mar 10 13:36:26 zenogentoo ata1: EH complete
Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x
/usr/sbin/run-crons && /usr/sbin/run-crons )
Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
; USER=root ; COMMAND=/usr/bin/emerge portage
Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ
Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50)
Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x6 frozen
Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA
Mar 10 13:49:53 zenogentoo ata1.00: cmd
ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out
Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
Emask 0x4 (timeout)
Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY }
Mar 10 13:49:53 zenogentoo ata1: soft resetting link
Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133
Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0
Mar 10 13:49:53 zenogentoo ata1: EH complete
Let me know if I can supply you with anymore information. Also see
attached lspci-v file.
Best
Zeno
[-- Attachment #2: lspci-v --]
[-- Type: application/octet-stream, Size: 5762 bytes --]
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 0e)
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Integrated Graphics Controller (rev 0e) (prog-if 00 [VGA controller])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at fbe80000 (32-bit, non-prefetchable) [size=512K]
I/O ports at dc00 [size=8]
Memory at d0000000 (32-bit, prefetchable) [size=256M]
Memory at fbe40000 (32-bit, non-prefetchable) [size=256K]
Capabilities: [d0] Power Management version 2
Kernel driver in use: i915
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, fast devsel, latency 0, IRQ 10
Memory at fbe38000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
Capabilities: [100] Virtual Channel <?>
Capabilities: [130] Root Complex Link <?>
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 05) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 05) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 05) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 05) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at fbe37c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d5) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Capabilities: [50] Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 05)
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 05) (prog-if 8a [Master SecP PriP])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 01f0 [size=8]
I/O ports at 03f4 [size=1]
I/O ports at 0170 [size=8]
I/O ports at 0374 [size=1]
I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at d080 [size=8]
I/O ports at d000 [size=4]
I/O ports at cc00 [size=8]
I/O ports at c880 [size=4]
I/O ports at c800 [size=16]
Capabilities: [70] Power Management version 2
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. Unknown device 1370
Flags: medium devsel, IRQ 10
I/O ports at 0400 [size=32]
02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Unknown device 0122
Flags: bus master, medium devsel, latency 64, IRQ 19
Memory at fbfff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at ec00 [size=128]
Capabilities: [50] Power Management version 2
Kernel driver in use: ohci1394
02:06.0 Ethernet controller: Intel Corporation 82541GI Gigabit Ethernet Controller (rev 05)
Subsystem: Micro-Star International Co., Ltd. Unknown device 822c
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
Memory at fbfc0000 (32-bit, non-prefetchable) [size=128K]
Memory at fbfa0000 (32-bit, non-prefetchable) [size=128K]
I/O ports at e880 [size=64]
Expansion ROM at fbf80000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Kernel driver in use: e1000
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1
2010-03-10 15:41 ` Zeno Davatz
@ 2010-03-10 16:30 ` Jeff Garzik
2010-03-10 17:43 ` Zeno Davatz
0 siblings, 1 reply; 7+ messages in thread
From: Jeff Garzik @ 2010-03-10 16:30 UTC (permalink / raw)
To: Zeno Davatz; +Cc: linux-kernel
On 03/10/2010 10:41 AM, Zeno Davatz wrote:
> Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x
> /usr/sbin/run-crons&& /usr/sbin/run-crons )
> Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
> ; USER=root ; COMMAND=/usr/bin/emerge --sync
> Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ
> Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50)
> Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
> 0x0 action 0x6 frozen
> Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA
> Mar 10 13:34:19 zenogentoo ata1.00: cmd
> c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in
> Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
> Emask 0x4 (timeout)
> Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY }
> Mar 10 13:34:19 zenogentoo ata1: soft resetting link
> Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133
> Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0
> Mar 10 13:34:19 zenogentoo ata1: EH complete
> Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ
> Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50)
> Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
> 0x0 action 0x6 frozen
> Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA
> Mar 10 13:36:26 zenogentoo ata1.00: cmd
> ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out
> Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
> Emask 0x4 (timeout)
> Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY }
> Mar 10 13:36:26 zenogentoo ata1: soft resetting link
> Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133
> Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0
> Mar 10 13:36:26 zenogentoo ata1: EH complete
> Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x
> /usr/sbin/run-crons&& /usr/sbin/run-crons )
> Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
> ; USER=root ; COMMAND=/usr/bin/emerge portage
> Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ
> Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50)
> Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
> 0x0 action 0x6 frozen
> Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA
> Mar 10 13:49:53 zenogentoo ata1.00: cmd
> ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out
> Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
> Emask 0x4 (timeout)
> Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY }
> Mar 10 13:49:53 zenogentoo ata1: soft resetting link
> Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133
> Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0
> Mar 10 13:49:53 zenogentoo ata1: EH complete
>
> Let me know if I can supply you with anymore information. Also see
> attached lspci-v file.
>
need full dmesg from boot, not just error snippet.
Jeff
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1
2010-03-10 16:30 ` Jeff Garzik
@ 2010-03-10 17:43 ` Zeno Davatz
2010-03-10 18:37 ` Jeff Garzik
0 siblings, 1 reply; 7+ messages in thread
From: Zeno Davatz @ 2010-03-10 17:43 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-kernel
On Wed, Mar 10, 2010 at 5:30 PM, Jeff Garzik <jeff@garzik.org> wrote:
> On 03/10/2010 10:41 AM, Zeno Davatz wrote:
>>
>> Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x
>> /usr/sbin/run-crons&& /usr/sbin/run-crons )
>> Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
>> ; USER=root ; COMMAND=/usr/bin/emerge --sync
>> Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ
>> Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50)
>> Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>> 0x0 action 0x6 frozen
>> Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA
>> Mar 10 13:34:19 zenogentoo ata1.00: cmd
>> c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in
>> Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>> Emask 0x4 (timeout)
>> Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY }
>> Mar 10 13:34:19 zenogentoo ata1: soft resetting link
>> Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133
>> Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0
>> Mar 10 13:34:19 zenogentoo ata1: EH complete
>> Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ
>> Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50)
>> Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>> 0x0 action 0x6 frozen
>> Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA
>> Mar 10 13:36:26 zenogentoo ata1.00: cmd
>> ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out
>> Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>> Emask 0x4 (timeout)
>> Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY }
>> Mar 10 13:36:26 zenogentoo ata1: soft resetting link
>> Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133
>> Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0
>> Mar 10 13:36:26 zenogentoo ata1: EH complete
>> Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x
>> /usr/sbin/run-crons&& /usr/sbin/run-crons )
>> Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
>> ; USER=root ; COMMAND=/usr/bin/emerge portage
>> Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ
>> Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50)
>> Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>> 0x0 action 0x6 frozen
>> Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA
>> Mar 10 13:49:53 zenogentoo ata1.00: cmd
>> ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out
>> Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>> Emask 0x4 (timeout)
>> Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY }
>> Mar 10 13:49:53 zenogentoo ata1: soft resetting link
>> Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133
>> Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0
>> Mar 10 13:49:53 zenogentoo ata1: EH complete
>>
>> Let me know if I can supply you with anymore information. Also see
>> attached lspci-v file.
>>
> need full dmesg from boot, not just error snippet.
This is the first message I get after boot that concerns ata:
Mar 10 08:11:13 zenogentoo ata1: clearing spurious IRQ
Mar 10 08:11:44 zenogentoo ata1: lost interrupt (Status 0x50)
Mar 10 08:11:44 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x6 frozen
Mar 10 08:11:44 zenogentoo ata1.00: failed command: WRITE DMA
Mar 10 08:11:44 zenogentoo ata1.00: cmd
ca/00:08:75:98:89/00:00:00:00:00/e3 tag 0 dma 4096 out
Mar 10 08:11:44 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
Emask 0x4 (timeout)
Mar 10 08:11:44 zenogentoo ata1.00: status: { DRDY }
Mar 10 08:11:44 zenogentoo ata1: soft resetting link
Mar 10 08:11:44 zenogentoo ata1.00: configured for UDMA/133
Mar 10 08:11:44 zenogentoo ata1.00: device reported invalid CHS sector 0
Mar 10 08:11:44 zenogentoo ata1: EH complete
and then it continues with:
Mar 10 08:26:14 zenogentoo ata1: clearing spurious IRQ
Mar 10 08:26:44 zenogentoo ata1: lost interrupt (Status 0x50)
Mar 10 08:26:44 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x6 frozen
Mar 10 08:26:44 zenogentoo ata1.00: failed command: READ DMA
Mar 10 08:26:44 zenogentoo ata1.00: cmd
c8/00:00:5d:ba:7b/00:00:00:00:00/e4 tag 0 dma 131072 in
Mar 10 08:26:44 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
Emask 0x4 (timeout)
Mar 10 08:26:44 zenogentoo ata1.00: status: { DRDY }
Mar 10 08:26:44 zenogentoo ata1: soft resetting link
Mar 10 08:26:44 zenogentoo ata1.00: configured for UDMA/133
Mar 10 08:26:44 zenogentoo ata1.00: device reported invalid CHS sector 0
Mar 10 08:26:44 zenogentoo ata1: EH complete
and so on:
Mar 10 09:35:56 zenogentoo ata1: clearing spurious IRQ
Mar 10 09:36:27 zenogentoo ata1: lost interrupt (Status 0x50)
Mar 10 09:36:27 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
0x0 action 0x6 frozen
Mar 10 09:36:27 zenogentoo ata1.00: failed command: READ DMA
Mar 10 09:36:27 zenogentoo ata1.00: cmd
c8/00:00:7d:7b:7d/00:00:00:00:00/e4 tag 0 dma 131072 in
Mar 10 09:36:27 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
Emask 0x4 (timeout)
Mar 10 09:36:27 zenogentoo ata1.00: status: { DRDY }
Mar 10 09:36:27 zenogentoo ata1: soft resetting link
Mar 10 09:36:27 zenogentoo ata1.00: configured for UDMA/133
Mar 10 09:36:27 zenogentoo ata1.00: device reported invalid CHS sector 0
Mar 10 09:36:27 zenogentoo ata1: EH complete
I can send you my complete /var/log/messages file if you want.
Best
Zeno
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1
2010-03-10 17:43 ` Zeno Davatz
@ 2010-03-10 18:37 ` Jeff Garzik
2010-03-10 19:52 ` Zeno Davatz
0 siblings, 1 reply; 7+ messages in thread
From: Jeff Garzik @ 2010-03-10 18:37 UTC (permalink / raw)
To: Zeno Davatz; +Cc: linux-kernel
On 03/10/2010 12:43 PM, Zeno Davatz wrote:
> On Wed, Mar 10, 2010 at 5:30 PM, Jeff Garzik<jeff@garzik.org> wrote:
>> On 03/10/2010 10:41 AM, Zeno Davatz wrote:
>>>
>>> Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x
>>> /usr/sbin/run-crons&& /usr/sbin/run-crons )
>>> Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
>>> ; USER=root ; COMMAND=/usr/bin/emerge --sync
>>> Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ
>>> Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50)
>>> Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>>> 0x0 action 0x6 frozen
>>> Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA
>>> Mar 10 13:34:19 zenogentoo ata1.00: cmd
>>> c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in
>>> Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>>> Emask 0x4 (timeout)
>>> Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY }
>>> Mar 10 13:34:19 zenogentoo ata1: soft resetting link
>>> Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133
>>> Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0
>>> Mar 10 13:34:19 zenogentoo ata1: EH complete
>>> Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ
>>> Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50)
>>> Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>>> 0x0 action 0x6 frozen
>>> Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA
>>> Mar 10 13:36:26 zenogentoo ata1.00: cmd
>>> ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out
>>> Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>>> Emask 0x4 (timeout)
>>> Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY }
>>> Mar 10 13:36:26 zenogentoo ata1: soft resetting link
>>> Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133
>>> Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0
>>> Mar 10 13:36:26 zenogentoo ata1: EH complete
>>> Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x
>>> /usr/sbin/run-crons&& /usr/sbin/run-crons )
>>> Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
>>> ; USER=root ; COMMAND=/usr/bin/emerge portage
>>> Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ
>>> Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50)
>>> Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>>> 0x0 action 0x6 frozen
>>> Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA
>>> Mar 10 13:49:53 zenogentoo ata1.00: cmd
>>> ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out
>>> Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>>> Emask 0x4 (timeout)
>>> Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY }
>>> Mar 10 13:49:53 zenogentoo ata1: soft resetting link
>>> Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133
>>> Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0
>>> Mar 10 13:49:53 zenogentoo ata1: EH complete
>>>
>>> Let me know if I can supply you with anymore information. Also see
>>> attached lspci-v file.
>>>
>> need full dmesg from boot, not just error snippet.
>
> This is the first message I get after boot that concerns ata:
Not -after- boot, full dmesg including boot, please. Run /bin/dmesg
just after booting.
Jeff
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ata1 timeouts on 2.6.34-rc1
2010-03-10 18:37 ` Jeff Garzik
@ 2010-03-10 19:52 ` Zeno Davatz
0 siblings, 0 replies; 7+ messages in thread
From: Zeno Davatz @ 2010-03-10 19:52 UTC (permalink / raw)
To: Jeff Garzik; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 3605 bytes --]
On Wed, Mar 10, 2010 at 7:37 PM, Jeff Garzik <jeff@garzik.org> wrote:
> On 03/10/2010 12:43 PM, Zeno Davatz wrote:
>>
>> On Wed, Mar 10, 2010 at 5:30 PM, Jeff Garzik<jeff@garzik.org> wrote:
>>>
>>> On 03/10/2010 10:41 AM, Zeno Davatz wrote:
>>>>
>>>> Mar 10 13:30:01 zenogentoo cron[12528]: (root) CMD (test -x
>>>> /usr/sbin/run-crons&& /usr/sbin/run-crons )
>>>> Mar 10 13:33:32 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
>>>> ; USER=root ; COMMAND=/usr/bin/emerge --sync
>>>> Mar 10 13:33:48 zenogentoo ata1: clearing spurious IRQ
>>>> Mar 10 13:34:19 zenogentoo ata1: lost interrupt (Status 0x50)
>>>> Mar 10 13:34:19 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>>>> 0x0 action 0x6 frozen
>>>> Mar 10 13:34:19 zenogentoo ata1.00: failed command: READ DMA
>>>> Mar 10 13:34:19 zenogentoo ata1.00: cmd
>>>> c8/00:08:d5:20:cb/00:00:00:00:00/e9 tag 0 dma 4096 in
>>>> Mar 10 13:34:19 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>>>> Emask 0x4 (timeout)
>>>> Mar 10 13:34:19 zenogentoo ata1.00: status: { DRDY }
>>>> Mar 10 13:34:19 zenogentoo ata1: soft resetting link
>>>> Mar 10 13:34:19 zenogentoo ata1.00: configured for UDMA/133
>>>> Mar 10 13:34:19 zenogentoo ata1.00: device reported invalid CHS sector 0
>>>> Mar 10 13:34:19 zenogentoo ata1: EH complete
>>>> Mar 10 13:35:55 zenogentoo ata1: clearing spurious IRQ
>>>> Mar 10 13:36:26 zenogentoo ata1: lost interrupt (Status 0x50)
>>>> Mar 10 13:36:26 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>>>> 0x0 action 0x6 frozen
>>>> Mar 10 13:36:26 zenogentoo ata1.00: failed command: WRITE DMA
>>>> Mar 10 13:36:26 zenogentoo ata1.00: cmd
>>>> ca/00:10:1d:ad:52/00:00:00:00:00/e6 tag 0 dma 8192 out
>>>> Mar 10 13:36:26 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>>>> Emask 0x4 (timeout)
>>>> Mar 10 13:36:26 zenogentoo ata1.00: status: { DRDY }
>>>> Mar 10 13:36:26 zenogentoo ata1: soft resetting link
>>>> Mar 10 13:36:26 zenogentoo ata1.00: configured for UDMA/133
>>>> Mar 10 13:36:26 zenogentoo ata1.00: device reported invalid CHS sector 0
>>>> Mar 10 13:36:26 zenogentoo ata1: EH complete
>>>> Mar 10 13:40:01 zenogentoo cron[12707]: (root) CMD (test -x
>>>> /usr/sbin/run-crons&& /usr/sbin/run-crons )
>>>> Mar 10 13:48:05 zenogentoo sudo: zeno : TTY=pts/0 ; PWD=/home/zeno
>>>> ; USER=root ; COMMAND=/usr/bin/emerge portage
>>>> Mar 10 13:49:22 zenogentoo ata1: clearing spurious IRQ
>>>> Mar 10 13:49:53 zenogentoo ata1: lost interrupt (Status 0x50)
>>>> Mar 10 13:49:53 zenogentoo ata1.00: exception Emask 0x0 SAct 0x0 SErr
>>>> 0x0 action 0x6 frozen
>>>> Mar 10 13:49:53 zenogentoo ata1.00: failed command: WRITE DMA
>>>> Mar 10 13:49:53 zenogentoo ata1.00: cmd
>>>> ca/00:08:05:21:df/00:00:00:00:00/ef tag 0 dma 4096 out
>>>> Mar 10 13:49:53 zenogentoo res 40/00:00:00:00:00/00:00:00:00:00/00
>>>> Emask 0x4 (timeout)
>>>> Mar 10 13:49:53 zenogentoo ata1.00: status: { DRDY }
>>>> Mar 10 13:49:53 zenogentoo ata1: soft resetting link
>>>> Mar 10 13:49:53 zenogentoo ata1.00: configured for UDMA/133
>>>> Mar 10 13:49:53 zenogentoo ata1.00: device reported invalid CHS sector 0
>>>> Mar 10 13:49:53 zenogentoo ata1: EH complete
>>>>
>>>> Let me know if I can supply you with anymore information. Also see
>>>> attached lspci-v file.
>>>>
>>> need full dmesg from boot, not just error snippet.
>>
>> This is the first message I get after boot that concerns ata:
>
> Not -after- boot, full dmesg including boot, please. Run /bin/dmesg just
> after booting.
Ok, thanks for the tip, see attachment.
Best
Zeno
[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 15771 bytes --]
t [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - 0A, should be 07 (20100121/tbutils-314)
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xffffffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xfbe80000-0xfbefffff]
pci 0000:00:02.0: reg 14: [io 0xdc00-0xdc07]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:02.0: reg 1c: [mem 0xfbe40000-0xfbe7ffff]
pci 0000:00:1b.0: reg 10: [mem 0xfbe38000-0xfbe3bfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xd880-0xd89f]
pci 0000:00:1d.1: reg 20: [io 0xd800-0xd81f]
pci 0000:00:1d.2: reg 20: [io 0xd480-0xd49f]
pci 0000:00:1d.3: reg 20: [io 0xd400-0xd41f]
pci 0000:00:1d.7: reg 10: [mem 0xfbe37c00-0xfbe37fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 2 PIO at 0290-029f
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10: [io 0xd080-0xd087]
pci 0000:00:1f.2: reg 14: [io 0xd000-0xd003]
pci 0000:00:1f.2: reg 18: [io 0xcc00-0xcc07]
pci 0000:00:1f.2: reg 1c: [io 0xc880-0xc883]
pci 0000:00:1f.2: reg 20: [io 0xc800-0xc80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:02:03.0: reg 10: [mem 0xfbfff800-0xfbffffff]
pci 0000:02:03.0: reg 14: [io 0xec00-0xec7f]
pci 0000:02:03.0: supports D2
pci 0000:02:03.0: PME# supported from D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:02:06.0: reg 10: [mem 0xfbfc0000-0xfbfdffff]
pci 0000:02:06.0: reg 14: [mem 0xfbfa0000-0xfbfbffff]
pci 0000:02:06.0: reg 18: [io 0xe880-0xe8bf]
pci 0000:02:06.0: reg 30: [mem 0xfbf80000-0xfbf9ffff pref]
pci 0000:02:06.0: PME# supported from D0 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000 - 000fffff pref] reg reading
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.22.1.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009fc00 - 000000000009ffff
reserve RAM buffer: 000000007f7d0000 - 000000007fffffff
hpet clockevent registered
Switching to clocksource tsc
Slow work thread pool: Starting up
Slow work thread pool: Ready
FS-Cache: Loaded
CacheFiles: Loaded
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
system 00:08: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x0295-0x0296] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x0800-0x087f] has been reserved
system 00:09: [io 0x0480-0x04bf] has been reserved
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0x7f7fffff] could not be reserved
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1e.0: PCI bridge to [bus 02-02]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 32 bytes, default 64
kvm: no hardware support
highmem bounce pool size: 64 pages
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NTFS driver 2.1.29 [Flags: R/W DEBUG].
JFS: nTxBlock = 8192, nTxLock = 65536
msgmni has been set to 1727
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
lp: driver loaded but no devices found
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 915G Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
[drm] set up 7M of stolen space
Switched to NOHz mode on CPU #0
Switched to NOHz mode on CPU #1
[drm] initialized overlay support
Console: switching to colour frame buffer device 160x64
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
floppy0: no floppy controllers found
loop: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x266f rev 0x05)
PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7
ide1: BM-DMA at 0xffa8-0xffaf
Probing IDE interface ide0...
hda: LITE-ON DVDRW SHW-1635S, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
ide-cd driver 5.00
ide-cd: hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
ata2: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata1.00: ATA-7: INTEL SSDSA2MH160G1GC, 045C8820, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/31)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA INTEL SSDSA2MH16 045C PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
e1000: 0000:02:06.0: e1000_probe: (PCI:33MHz:32-bit) 00:13:d3:b4:3c:6c
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ohci1394 0000:02:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[fbfff800-fbffffff] Max Packet=[2048] IR/IT contexts=[4/8]
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbe37c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for symbol
usbcore: registered new interface driver symbol
USB Serial support registered for Handspring Visor / Palm OS
USB Serial support registered for Sony Clie 3.5
USB Serial support registered for Sony Clie 5.0
usbcore: registered new interface driver visor
visor: USB HandSpring Visor / Palm OS driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbcore: registered new interface driver snd-usb-audio
ALSA device list:
No soundcards found.
oprofile: using NMI interrupt.
TCP cubic registered
NET: Registered protocol family 17
Bridge firewalling registered
Using IPI No-Shortcut mode
kmemleak: Kernel memory leak detector initialized
kmemleak: Automatic memory scanning thread started
UDF-fs: No partition found (1)
VFS: Mounted root (jfs filesystem) readonly on device 8:3.
Freeing unused kernel memory: 432k freed
usb 2-2: new full speed USB device using uhci_hcd and address 2
input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.3/input/input2
generic-usb 0003:046D:0A01.0001: input: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1d.0-2/input3
udev: starting version 135
ieee1394: Host added: ID:BUS[0-00:1023] GUID[000010dc00c7cc9c]
usb 3-1: new low speed USB device using uhci_hcd and address 2
input: Logitech USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input3
generic-usb 0003:046D:C00C.0002: input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.1-1/input0
usb 3-2: new full speed USB device using uhci_hcd and address 3
hub 3-2:1.0: USB hub found
hub 3-2:1.0: 4 ports detected
usb 3-2.2: new full speed USB device using uhci_hcd and address 4
input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.0/input/input4
generic-usb 0003:05F3:0007.0003: input: USB HID v1.00 Keyboard [HID 05f3:0007] on usb-0000:00:1d.1-2.2/input0
input: HID 05f3:0007 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2.2/3-2.2:1.1/input/input5
generic-usb 0003:05F3:0007.0004: input: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:1d.1-2.2/input1
Adding 192776k swap on /dev/sda2. Priority:-1 extents:1 across:192776k SS
e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2010-03-10 19:52 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-10 10:08 ata1 timeouts on 2.6.34-rc1 Zeno Davatz
2010-03-10 14:31 ` Jeff Garzik
2010-03-10 15:41 ` Zeno Davatz
2010-03-10 16:30 ` Jeff Garzik
2010-03-10 17:43 ` Zeno Davatz
2010-03-10 18:37 ` Jeff Garzik
2010-03-10 19:52 ` Zeno Davatz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox