From: Sergei Shtylyov <sshtylyov@mvista.com>
To: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
Cc: linux-kernel@vger.kernel.org,
davinci-linux-open-source@linux.davincidsp.com,
akpm@linux-foundation.org
Subject: Re: [PATCH] davinci: MMC: Pass number of SG segments as platform data
Date: Thu, 11 Mar 2010 14:00:45 +0300 [thread overview]
Message-ID: <4B98CD5D.3080709@mvista.com> (raw)
In-Reply-To: <1268292756-5369-1-git-send-email-sudhakar.raj@ti.com>
Hello.
Sudhakar Rajashekhara wrote:
> On some platforms like DM355, the number of EDMA parameter
> slots available for EDMA_SLOT_ANY usage are few. In such cases,
> if MMC/SD uses 16 slots for each instance of MMC controller,
> then the number of slots available for other modules will be
> very few.
>
> By passing the number of EDMA slots to be used in MMC driver
> from platform data, EDMA slots available for other purposes
> can be controlled.
>
> Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com>
> ---
> arch/arm/mach-davinci/include/mach/mmc.h | 3 +++
> drivers/mmc/host/davinci_mmc.c | 22 +++++++++++++++-------
> 2 files changed, 18 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h
> index 5a85e24..384fc0e 100644
> --- a/arch/arm/mach-davinci/include/mach/mmc.h
> +++ b/arch/arm/mach-davinci/include/mach/mmc.h
> @@ -22,6 +22,9 @@ struct davinci_mmc_config {
>
> /* Version of the MMC/SD controller */
> u8 version;
> +
> + /* Number of sg segments */
> + u32 nr_sg;
>
Why waste 4 bytres if the maximum number is 16?
> diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
> index 3bd0ba2..19c050c 100644
> --- a/drivers/mmc/host/davinci_mmc.c
> +++ b/drivers/mmc/host/davinci_mmc.c
> @@ -137,15 +137,15 @@
>
> /*
> * One scatterlist dma "segment" is at most MAX_CCNT rw_threshold units,
> - * and we handle up to NR_SG segments. MMC_BLOCK_BOUNCE kicks in only
> + * and we handle up to MAX_NR_SG segments. MMC_BLOCK_BOUNCE kicks in only
> * for drivers with max_hw_segs == 1, making the segments bigger (64KB)
> - * than the page or two that's otherwise typical. NR_SG == 16 gives at
> - * least the same throughput boost, using EDMA transfer linkage instead
> - * of spending CPU time copying pages.
> + * than the page or two that's otherwise typical. nr_sg (passed from
> + * platform data) == 16 gives at least the same throughput boost, using
> + * EDMA transfer linkage instead of spending CPU time copying pages.
> */
> #define MAX_CCNT ((1 << 16) - 1)
>
> -#define NR_SG 16
> +#define MAX_NR_SG 16
>
> static unsigned rw_threshold = 32;
> module_param(rw_threshold, uint, S_IRUGO);
> @@ -192,7 +192,7 @@ struct mmc_davinci_host {
> struct edmacc_param tx_template;
> struct edmacc_param rx_template;
> unsigned n_link;
> - u32 links[NR_SG - 1];
> + u32 links[MAX_NR_SG - 1];
>
> /* For PIO we walk scatterlists one segment at a time. */
>
> unsigned int sg_len;
> @@ -202,6 +202,8 @@ struct mmc_davinci_host {
> u8 version;
> /* for ns in one cycle calculation */
> unsigned ns_in_one_cycle;
> + /* Number of sg segments */
> + u32 nr_sg;
>
Same question.
WBR, Sergei
next prev parent reply other threads:[~2010-03-11 11:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-11 7:32 [PATCH] davinci: MMC: Pass number of SG segments as platform data Sudhakar Rajashekhara
2010-03-11 11:00 ` Sergei Shtylyov [this message]
2010-03-11 23:39 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4B98CD5D.3080709@mvista.com \
--to=sshtylyov@mvista.com \
--cc=akpm@linux-foundation.org \
--cc=davinci-linux-open-source@linux.davincidsp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=sudhakar.raj@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox