* [PATCH] staging: winbond: reg.c Coding style fixes.
@ 2010-03-20 15:14 Lars Lindley
2010-03-20 16:24 ` Dan Carpenter
0 siblings, 1 reply; 10+ messages in thread
From: Lars Lindley @ 2010-03-20 15:14 UTC (permalink / raw)
To: gregkh, greg, penberg, pavel, harvey.harrison
Cc: devel, linux-kernel, Lars Lindley
I fixed all problems reported by checkpatch.pl except some
(a lot of) long lines and some printk:s.
I removed "commented away" code and version comments.
Signed-off-by: Lars Lindley <lindley@coyote.org>
---
drivers/staging/winbond/reg.c | 3984 +++++++++++++++++++----------------------
1 files changed, 1846 insertions(+), 2138 deletions(-)
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 5f5048a..2bddf8f 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -1,514 +1,452 @@
#include "sysdef.h"
#include "wbhal_f.h"
-///////////////////////////////////////////////////////////////////////////////////////////////////
-// Original Phy.h
-//*****************************************************************************
-
-/*****************************************************************************
-; For MAXIM2825/6/7 Ver. 331 or more
-; Edited by Tiger, Sep-17-2003
-; revised by Ben, Sep-18-2003
-
-0x00 0x000a2
-0x01 0x21cc0
-;0x02 0x13802
-0x02 0x1383a
-
-;channe1 01 ; 0x03 0x30142 ; 0x04 0x0b333;
-;channe1 02 ;0x03 0x32141 ;0x04 0x08444;
-;channe1 03 ;0x03 0x32143 ;0x04 0x0aeee;
-;channe1 04 ;0x03 0x32142 ;0x04 0x0b333;
-;channe1 05 ;0x03 0x31141 ;0x04 0x08444;
-;channe1 06 ;
-0x03 0x31143;
-0x04 0x0aeee;
-;channe1 07 ;0x03 0x31142 ;0x04 0x0b333;
-;channe1 08 ;0x03 0x33141 ;0x04 0x08444;
-;channe1 09 ;0x03 0x33143 ;0x04 0x0aeee;
-;channe1 10 ;0x03 0x33142 ;0x04 0x0b333;
-;channe1 11 ;0x03 0x30941 ;0x04 0x08444;
-;channe1 12 ;0x03 0x30943 ;0x04 0x0aeee;
-;channe1 13 ;0x03 0x30942 ;0x04 0x0b333;
-
-0x05 0x28986
-0x06 0x18008
-0x07 0x38400
-0x08 0x05100; 100 Hz DC
-;0x08 0x05900; 30 KHz DC
-0x09 0x24f08
-0x0a 0x17e00, 0x17ea0
-0x0b 0x37d80
-0x0c 0x0c900 // 0x0ca00 (lager power 9db than 0x0c000), 0x0c000
-*****************************************************************************/
-// MAX2825 (pure b/g)
-u32 max2825_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x21cc0,
- (0x02<<18)|0x13806,
- (0x03<<18)|0x30142,
- (0x04<<18)|0x0b333,
- (0x05<<18)|0x289A6,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x38000,
- (0x08<<18)|0x05100,
- (0x09<<18)|0x24f08,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37d80,
- (0x0C<<18)|0x0c100 // 11a: 0x0c300, 11g: 0x0c100
-};
+/*
+ * ====================================================
+ * Original Phy.h
+ * ====================================================
+ */
-u32 max2825_channel_data_24[][3] =
-{
- {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
- {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
- {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
- {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
- {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
- {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
- {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
- {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
- {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
- {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
- {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
- {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
- {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
- {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6} // 14 (2484MHz) hhmodify
+/*
+ * ====================================================
+ * For MAXIM2825/6/7 Ver. 331 or more
+ *
+ * 0x00 0x000a2
+ * 0x01 0x21cc0
+ * 0x02 0x13802
+ * 0x02 0x1383a
+ *
+ * channe1 01 ; 0x03 0x30142 ; 0x04 0x0b333;
+ * channe1 02 ; 0x03 0x32141 ; 0x04 0x08444;
+ * channe1 03 ; 0x03 0x32143 ; 0x04 0x0aeee;
+ * channe1 04 ; 0x03 0x32142 ; 0x04 0x0b333;
+ * channe1 05 ; 0x03 0x31141 ; 0x04 0x08444;
+ * channe1 06 ; 0x03 0x31143 ; 0x04 0x0aeee;
+ * channe1 07 ; 0x03 0x31142 ; 0x04 0x0b333;
+ * channe1 08 ; 0x03 0x33141 ; 0x04 0x08444;
+ * channe1 09 ; 0x03 0x33143 ; 0x04 0x0aeee;
+ * channe1 10 ; 0x03 0x33142 ; 0x04 0x0b333;
+ * channe1 11 ; 0x03 0x30941 ; 0x04 0x08444;
+ * channe1 12 ; 0x03 0x30943 ; 0x04 0x0aeee;
+ * channe1 13 ; 0x03 0x30942 ; 0x04 0x0b333;
+ *
+ * 0x05 0x28986
+ * 0x06 0x18008
+ * 0x07 0x38400
+ * 0x08 0x05100; 100 Hz DC
+ * 0x08 0x05900; 30 KHz DC
+ * 0x09 0x24f08
+ * 0x0a 0x17e00, 0x17ea0
+ * 0x0b 0x37d80
+ * 0x0c 0x0c900 -- 0x0ca00 (lager power 9db than 0x0c000), 0x0c000
+ */
+
+/* MAX2825 (pure b/g) */
+u32 max2825_rf_data[] = {
+ (0x00<<18) | 0x000a2,
+ (0x01<<18) | 0x21cc0,
+ (0x02<<18) | 0x13806,
+ (0x03<<18) | 0x30142,
+ (0x04<<18) | 0x0b333,
+ (0x05<<18) | 0x289A6,
+ (0x06<<18) | 0x18008,
+ (0x07<<18) | 0x38000,
+ (0x08<<18) | 0x05100,
+ (0x09<<18) | 0x24f08,
+ (0x0A<<18) | 0x14000,
+ (0x0B<<18) | 0x37d80,
+ (0x0C<<18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */
};
-u32 max2825_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-
-/****************************************************************************/
-// MAX2827 (a/b/g)
-u32 max2827_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x21cc0,
- (0x02<<18)|0x13806,
- (0x03<<18)|0x30142,
- (0x04<<18)|0x0b333,
- (0x05<<18)|0x289A6,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x38000,
- (0x08<<18)|0x05100,
- (0x09<<18)|0x24f08,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37d80,
- (0x0C<<18)|0x0c100 // 11a: 0x0c300, 11g: 0x0c100
+u32 max2825_channel_data_24[][3] = {
+ {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 01 */
+ {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 02 */
+ {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 03 */
+ {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 04 */
+ {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 05 */
+ {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 06 */
+ {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 07 */
+ {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 08 */
+ {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 09 */
+ {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 10 */
+ {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channel 11 */
+ {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channel 12 */
+ {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 13 */
+ {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */
};
-u32 max2827_channel_data_24[][3] =
-{
- {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
- {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
- {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
- {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
- {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
- {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
- {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
- {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
- {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
- {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
- {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
- {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
- {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
- {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6} // 14 (2484MHz) hhmodify
+u32 max2825_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+
+/* ========================================== */
+/* MAX2827 (a/b/g) */
+u32 max2827_rf_data[] = {
+ (0x00 << 18) | 0x000a2,
+ (0x01 << 18) | 0x21cc0,
+ (0x02 << 18) | 0x13806,
+ (0x03 << 18) | 0x30142,
+ (0x04 << 18) | 0x0b333,
+ (0x05 << 18) | 0x289A6,
+ (0x06 << 18) | 0x18008,
+ (0x07 << 18) | 0x38000,
+ (0x08 << 18) | 0x05100,
+ (0x09 << 18) | 0x24f08,
+ (0x0A << 18) | 0x14000,
+ (0x0B << 18) | 0x37d80,
+ (0x0C << 18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */
};
-u32 max2827_channel_data_50[][3] =
-{
- {(0x03<<18)|0x33cc3, (0x04<<18)|0x08ccc, (0x05<<18)|0x2A9A6}, // channel 36
- {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x2A9A6}, // channel 40
- {(0x03<<18)|0x302c2, (0x04<<18)|0x0b333, (0x05<<18)|0x2A9A6}, // channel 44
- {(0x03<<18)|0x322c1, (0x04<<18)|0x09999, (0x05<<18)|0x2A9A6}, // channel 48
- {(0x03<<18)|0x312c1, (0x04<<18)|0x0a666, (0x05<<18)|0x2A9A6}, // channel 52
- {(0x03<<18)|0x332c3, (0x04<<18)|0x08ccc, (0x05<<18)|0x2A9A6}, // channel 56
- {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x2A9A6}, // channel 60
- {(0x03<<18)|0x30ac2, (0x04<<18)|0x0b333, (0x05<<18)|0x2A9A6} // channel 64
+u32 max2827_channel_data_24[][3] = {
+ {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */
+ {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */
+ {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */
+ {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 04 */
+ {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 05 */
+ {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 06 */
+ {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 07 */
+ {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 08 */
+ {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 09 */
+ {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 10 */
+ {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 11 */
+ {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 12 */
+ {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 13 */
+ {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */
};
-u32 max2827_power_data_24[] = {(0x0C<<18)|0x0C000, (0x0C<<18)|0x0D600, (0x0C<<18)|0x0C100};
-u32 max2827_power_data_50[] = {(0x0C<<18)|0x0C400, (0x0C<<18)|0x0D500, (0x0C<<18)|0x0C300};
-
-/****************************************************************************/
-// MAX2828 (a/b/g)
-u32 max2828_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x21cc0,
- (0x02<<18)|0x13806,
- (0x03<<18)|0x30142,
- (0x04<<18)|0x0b333,
- (0x05<<18)|0x289A6,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x38000,
- (0x08<<18)|0x05100,
- (0x09<<18)|0x24f08,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37d80,
- (0x0C<<18)|0x0c100 // 11a: 0x0c300, 11g: 0x0c100
+u32 max2827_channel_data_50[][3] = {
+ {(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 36 */
+ {(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 40 */
+ {(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6}, /* channel 44 */
+ {(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x2A9A6}, /* channel 48 */
+ {(0x03 << 18) | 0x312c1, (0x04 << 18) | 0x0a666, (0x05 << 18) | 0x2A9A6}, /* channel 52 */
+ {(0x03 << 18) | 0x332c3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x2A9A6}, /* channel 56 */
+ {(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2A9A6}, /* channel 60 */
+ {(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2A9A6} /* channel 64 */
};
-u32 max2828_channel_data_24[][3] =
-{
- {(0x03<<18)|0x30142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 01
- {(0x03<<18)|0x32141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 02
- {(0x03<<18)|0x32143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 03
- {(0x03<<18)|0x32142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 04
- {(0x03<<18)|0x31141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 05
- {(0x03<<18)|0x31143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 06
- {(0x03<<18)|0x31142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 07
- {(0x03<<18)|0x33141, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 08
- {(0x03<<18)|0x33143, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 09
- {(0x03<<18)|0x33142, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 10
- {(0x03<<18)|0x30941, (0x04<<18)|0x08444, (0x05<<18)|0x289A6}, // channe1 11
- {(0x03<<18)|0x30943, (0x04<<18)|0x0aeee, (0x05<<18)|0x289A6}, // channe1 12
- {(0x03<<18)|0x30942, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channe1 13
- {(0x03<<18)|0x32941, (0x04<<18)|0x09999, (0x05<<18)|0x289A6} // 14 (2484MHz) hhmodify
+u32 max2827_power_data_24[] = {(0x0C << 18) | 0x0C000, (0x0C << 18) | 0x0D600, (0x0C << 18) | 0x0C100};
+u32 max2827_power_data_50[] = {(0x0C << 18) | 0x0C400, (0x0C << 18) | 0x0D500, (0x0C << 18) | 0x0C300};
+
+/* ======================================================= */
+/* MAX2828 (a/b/g) */
+u32 max2828_rf_data[] = {
+ (0x00 << 18) | 0x000a2,
+ (0x01 << 18) | 0x21cc0,
+ (0x02 << 18) | 0x13806,
+ (0x03 << 18) | 0x30142,
+ (0x04 << 18) | 0x0b333,
+ (0x05 << 18) | 0x289A6,
+ (0x06 << 18) | 0x18008,
+ (0x07 << 18) | 0x38000,
+ (0x08 << 18) | 0x05100,
+ (0x09 << 18) | 0x24f08,
+ (0x0A << 18) | 0x14000,
+ (0x0B << 18) | 0x37d80,
+ (0x0C << 18) | 0x0c100 /* 11a: 0x0c300, 11g: 0x0c100 */
};
-u32 max2828_channel_data_50[][3] =
-{
- {(0x03<<18)|0x33cc3, (0x04<<18)|0x08ccc, (0x05<<18)|0x289A6}, // channel 36
- {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x289A6}, // channel 40
- {(0x03<<18)|0x302c2, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6}, // channel 44
- {(0x03<<18)|0x322c1, (0x04<<18)|0x09999, (0x05<<18)|0x289A6}, // channel 48
- {(0x03<<18)|0x312c1, (0x04<<18)|0x0a666, (0x05<<18)|0x289A6}, // channel 52
- {(0x03<<18)|0x332c3, (0x04<<18)|0x08ccc, (0x05<<18)|0x289A6}, // channel 56
- {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x289A6}, // channel 60
- {(0x03<<18)|0x30ac2, (0x04<<18)|0x0b333, (0x05<<18)|0x289A6} // channel 64
+u32 max2828_channel_data_24[][3] = {
+ {(0x03 << 18) | 0x30142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 01 */
+ {(0x03 << 18) | 0x32141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 02 */
+ {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 03 */
+ {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 04 */
+ {(0x03 << 18) | 0x31141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 05 */
+ {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 06 */
+ {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 07 */
+ {(0x03 << 18) | 0x33141, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 08 */
+ {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 09 */
+ {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 10 */
+ {(0x03 << 18) | 0x30941, (0x04 << 18) | 0x08444, (0x05 << 18) | 0x289A6}, /* channe1 11 */
+ {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0aeee, (0x05 << 18) | 0x289A6}, /* channe1 12 */
+ {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channe1 13 */
+ {(0x03 << 18) | 0x32941, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6} /* channel 14 (2484MHz) */
};
-u32 max2828_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-u32 max2828_power_data_50[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-
-/****************************************************************************/
-// LA20040728 kevin
-// MAX2829 (a/b/g)
-u32 max2829_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x23520,
- (0x02<<18)|0x13802,
- (0x03<<18)|0x30142,
- (0x04<<18)|0x0b333,
- (0x05<<18)|0x28906,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x3B500,
- (0x08<<18)|0x05100,
- (0x09<<18)|0x24f08,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37d80,
- (0x0C<<18)|0x0F300 //TXVGA=51, (MAX-6 dB)
+u32 max2828_channel_data_50[][3] = {
+ {(0x03 << 18) | 0x33cc3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 36 */
+ {(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 40 */
+ {(0x03 << 18) | 0x302c2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6}, /* channel 44 */
+ {(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x289A6}, /* channel 48 */
+ {(0x03 << 18) | 0x312c1, (0x04 << 18) | 0x0a666, (0x05 << 18) | 0x289A6}, /* channel 52 */
+ {(0x03 << 18) | 0x332c3, (0x04 << 18) | 0x08ccc, (0x05 << 18) | 0x289A6}, /* channel 56 */
+ {(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x289A6}, /* channel 60 */
+ {(0x03 << 18) | 0x30ac2, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x289A6} /* channel 64 */
};
-u32 max2829_channel_data_24[][3] =
-{
- {(3<<18)|0x30142, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 01 (2412MHz)
- {(3<<18)|0x32141, (4<<18)|0x08444, (5<<18)|0x289C6}, // 02 (2417MHz)
- {(3<<18)|0x32143, (4<<18)|0x0aeee, (5<<18)|0x289C6}, // 03 (2422MHz)
- {(3<<18)|0x32142, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 04 (2427MHz)
- {(3<<18)|0x31141, (4<<18)|0x08444, (5<<18)|0x289C6}, // 05 (2432MHz)
- {(3<<18)|0x31143, (4<<18)|0x0aeee, (5<<18)|0x289C6}, // 06 (2437MHz)
- {(3<<18)|0x31142, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 07 (2442MHz)
- {(3<<18)|0x33141, (4<<18)|0x08444, (5<<18)|0x289C6}, // 08 (2447MHz)
- {(3<<18)|0x33143, (4<<18)|0x0aeee, (5<<18)|0x289C6}, // 09 (2452MHz)
- {(3<<18)|0x33142, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 10 (2457MHz)
- {(3<<18)|0x30941, (4<<18)|0x08444, (5<<18)|0x289C6}, // 11 (2462MHz)
- {(3<<18)|0x30943, (4<<18)|0x0aeee, (5<<18)|0x289C6}, // 12 (2467MHz)
- {(3<<18)|0x30942, (4<<18)|0x0b333, (5<<18)|0x289C6}, // 13 (2472MHz)
- {(3<<18)|0x32941, (4<<18)|0x09999, (5<<18)|0x289C6}, // 14 (2484MHz) hh-modify
+u32 max2828_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+u32 max2828_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+
+/* ========================================================== */
+/* MAX2829 (a/b/g) */
+u32 max2829_rf_data[] = {
+ (0x00 << 18) | 0x000a2,
+ (0x01 << 18) | 0x23520,
+ (0x02 << 18) | 0x13802,
+ (0x03 << 18) | 0x30142,
+ (0x04 << 18) | 0x0b333,
+ (0x05 << 18) | 0x28906,
+ (0x06 << 18) | 0x18008,
+ (0x07 << 18) | 0x3B500,
+ (0x08 << 18) | 0x05100,
+ (0x09 << 18) | 0x24f08,
+ (0x0A << 18) | 0x14000,
+ (0x0B << 18) | 0x37d80,
+ (0x0C << 18) | 0x0F300 /* TXVGA=51, (MAX-6 dB) */
};
-u32 max2829_channel_data_50[][4] =
-{
- {36, (3<<18)|0x33cc3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 36 (5.180GHz)
- {40, (3<<18)|0x302c0, (4<<18)|0x08000, (5<<18)|0x2A946}, // 40 (5.200GHz)
- {44, (3<<18)|0x302c2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 44 (5.220GHz)
- {48, (3<<18)|0x322c1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 48 (5.240GHz)
- {52, (3<<18)|0x312c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 52 (5.260GHz)
- {56, (3<<18)|0x332c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 56 (5.280GHz)
- {60, (3<<18)|0x30ac0, (4<<18)|0x08000, (5<<18)|0x2A946}, // 60 (5.300GHz)
- {64, (3<<18)|0x30ac2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 64 (5.320GHz)
-
- {100, (3<<18)|0x30ec0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 100 (5.500GHz)
- {104, (3<<18)|0x30ec2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 104 (5.520GHz)
- {108, (3<<18)|0x32ec1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 108 (5.540GHz)
- {112, (3<<18)|0x31ec1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 112 (5.560GHz)
- {116, (3<<18)|0x33ec3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 116 (5.580GHz)
- {120, (3<<18)|0x301c0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 120 (5.600GHz)
- {124, (3<<18)|0x301c2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 124 (5.620GHz)
- {128, (3<<18)|0x321c1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 128 (5.640GHz)
- {132, (3<<18)|0x311c1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 132 (5.660GHz)
- {136, (3<<18)|0x331c3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 136 (5.680GHz)
- {140, (3<<18)|0x309c0, (4<<18)|0x08000, (5<<18)|0x2A9C6}, // 140 (5.700GHz)
-
- {149, (3<<18)|0x329c2, (4<<18)|0x0b333, (5<<18)|0x2A9C6}, // 149 (5.745GHz)
- {153, (3<<18)|0x319c1, (4<<18)|0x09999, (5<<18)|0x2A9C6}, // 153 (5.765GHz)
- {157, (3<<18)|0x339c1, (4<<18)|0x0a666, (5<<18)|0x2A9C6}, // 157 (5.785GHz)
- {161, (3<<18)|0x305c3, (4<<18)|0x08ccc, (5<<18)|0x2A9C6}, // 161 (5.805GHz)
-
- // Japan
- { 184, (3<<18)|0x308c2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 184 (4.920GHz)
- { 188, (3<<18)|0x328c1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 188 (4.940GHz)
- { 192, (3<<18)|0x318c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 192 (4.960GHz)
- { 196, (3<<18)|0x338c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 196 (4.980GHz)
- { 8, (3<<18)|0x324c1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 8 (5.040GHz)
- { 12, (3<<18)|0x314c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 12 (5.060GHz)
- { 16, (3<<18)|0x334c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 16 (5.080GHz)
- { 34, (3<<18)|0x31cc2, (4<<18)|0x0b333, (5<<18)|0x2A946}, // 34 (5.170GHz)
- { 38, (3<<18)|0x33cc1, (4<<18)|0x09999, (5<<18)|0x2A946}, // 38 (5.190GHz)
- { 42, (3<<18)|0x302c1, (4<<18)|0x0a666, (5<<18)|0x2A946}, // 42 (5.210GHz)
- { 46, (3<<18)|0x322c3, (4<<18)|0x08ccc, (5<<18)|0x2A946}, // 46 (5.230GHz)
+u32 max2829_channel_data_24[][3] = {
+ {(3 << 18) | 0x30142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 01 (2412MHz) */
+ {(3 << 18) | 0x32141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 02 (2417MHz) */
+ {(3 << 18) | 0x32143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 03 (2422MHz) */
+ {(3 << 18) | 0x32142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 04 (2427MHz) */
+ {(3 << 18) | 0x31141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 05 (2432MHz) */
+ {(3 << 18) | 0x31143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 06 (2437MHz) */
+ {(3 << 18) | 0x31142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 07 (2442MHz) */
+ {(3 << 18) | 0x33141, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 08 (2447MHz) */
+ {(3 << 18) | 0x33143, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 09 (2452MHz) */
+ {(3 << 18) | 0x33142, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 10 (2457MHz) */
+ {(3 << 18) | 0x30941, (4 << 18) | 0x08444, (5 << 18) | 0x289C6}, /* 11 (2462MHz) */
+ {(3 << 18) | 0x30943, (4 << 18) | 0x0aeee, (5 << 18) | 0x289C6}, /* 12 (2467MHz) */
+ {(3 << 18) | 0x30942, (4 << 18) | 0x0b333, (5 << 18) | 0x289C6}, /* 13 (2472MHz) */
+ {(3 << 18) | 0x32941, (4 << 18) | 0x09999, (5 << 18) | 0x289C6}, /* 14 (2484MHz) */
};
-/*****************************************************************************
-; For MAXIM2825/6/7 Ver. 317 or less
-; Edited by Tiger, Sep-17-2003 for 2.4Ghz channels
-; Updated by Tiger, Sep-22-2003 for 5.0Ghz channels
-; Corrected by Tiger, Sep-23-2003, for 0x03 and 0x04 of 5.0Ghz channels
-
-0x00 0x00080
-0x01 0x214c0
-0x02 0x13802
-
-;2.4GHz Channels
-;channe1 01 (2.412GHz); 0x03 0x30143 ;0x04 0x0accc
-;channe1 02 (2.417GHz); 0x03 0x32140 ;0x04 0x09111
-;channe1 03 (2.422GHz); 0x03 0x32142 ;0x04 0x0bbbb
-;channe1 04 (2.427GHz); 0x03 0x32143 ;0x04 0x0accc
-;channe1 05 (2.432GHz); 0x03 0x31140 ;0x04 0x09111
-;channe1 06 (2.437GHz); 0x03 0x31142 ;0x04 0x0bbbb
-;channe1 07 (2.442GHz); 0x03 0x31143 ;0x04 0x0accc
-;channe1 08 (2.447GHz); 0x03 0x33140 ;0x04 0x09111
-;channe1 09 (2.452GHz); 0x03 0x33142 ;0x04 0x0bbbb
-;channe1 10 (2.457GHz); 0x03 0x33143 ;0x04 0x0accc
-;channe1 11 (2.462GHz); 0x03 0x30940 ;0x04 0x09111
-;channe1 12 (2.467GHz); 0x03 0x30942 ;0x04 0x0bbbb
-;channe1 13 (2.472GHz); 0x03 0x30943 ;0x04 0x0accc
-
-;5.0Ghz Channels
-;channel 36 (5.180GHz); 0x03 0x33cc0 ;0x04 0x0b333
-;channel 40 (5.200GHz); 0x03 0x302c0 ;0x04 0x08000
-;channel 44 (5.220GHz); 0x03 0x302c2 ;0x04 0x0b333
-;channel 48 (5.240GHz); 0x03 0x322c1 ;0x04 0x09999
-;channel 52 (5.260GHz); 0x03 0x312c1 ;0x04 0x0a666
-;channel 56 (5.280GHz); 0x03 0x332c3 ;0x04 0x08ccc
-;channel 60 (5.300GHz); 0x03 0x30ac0 ;0x04 0x08000
-;channel 64 (5.320GHz); 0x03 0x30ac2 ;0x04 0x08333
-
-;2.4GHz band ;0x05 0x28986;
-;5.0GHz band
-0x05 0x2a986
-
-0x06 0x18008
-0x07 0x38400
-0x08 0x05108
-0x09 0x27ff8
-0x0a 0x14000
-0x0b 0x37f99
-0x0c 0x0c000
-*****************************************************************************/
-u32 maxim_317_rf_data[] =
-{
- (0x00<<18)|0x000a2,
- (0x01<<18)|0x214c0,
- (0x02<<18)|0x13802,
- (0x03<<18)|0x30143,
- (0x04<<18)|0x0accc,
- (0x05<<18)|0x28986,
- (0x06<<18)|0x18008,
- (0x07<<18)|0x38400,
- (0x08<<18)|0x05108,
- (0x09<<18)|0x27ff8,
- (0x0A<<18)|0x14000,
- (0x0B<<18)|0x37f99,
- (0x0C<<18)|0x0c000
+u32 max2829_channel_data_50[][4] = {
+ {36, (3 << 18) | 0x33cc3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 36 (5.180GHz) */
+ {40, (3 << 18) | 0x302c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 40 (5.200GHz) */
+ {44, (3 << 18) | 0x302c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 44 (5.220GHz) */
+ {48, (3 << 18) | 0x322c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 48 (5.240GHz) */
+ {52, (3 << 18) | 0x312c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 52 (5.260GHz) */
+ {56, (3 << 18) | 0x332c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 56 (5.280GHz) */
+ {60, (3 << 18) | 0x30ac0, (4 << 18) | 0x08000, (5 << 18) | 0x2A946}, /* 60 (5.300GHz) */
+ {64, (3 << 18) | 0x30ac2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 64 (5.320GHz) */
+
+ {100, (3 << 18) | 0x30ec0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 100 (5.500GHz) */
+ {104, (3 << 18) | 0x30ec2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 104 (5.520GHz) */
+ {108, (3 << 18) | 0x32ec1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 108 (5.540GHz) */
+ {112, (3 << 18) | 0x31ec1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 112 (5.560GHz) */
+ {116, (3 << 18) | 0x33ec3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 116 (5.580GHz) */
+ {120, (3 << 18) | 0x301c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 120 (5.600GHz) */
+ {124, (3 << 18) | 0x301c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 124 (5.620GHz) */
+ {128, (3 << 18) | 0x321c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 128 (5.640GHz) */
+ {132, (3 << 18) | 0x311c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 132 (5.660GHz) */
+ {136, (3 << 18) | 0x331c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 136 (5.680GHz) */
+ {140, (3 << 18) | 0x309c0, (4 << 18) | 0x08000, (5 << 18) | 0x2A9C6}, /* 140 (5.700GHz) */
+
+ {149, (3 << 18) | 0x329c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A9C6}, /* 149 (5.745GHz) */
+ {153, (3 << 18) | 0x319c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A9C6}, /* 153 (5.765GHz) */
+ {157, (3 << 18) | 0x339c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A9C6}, /* 157 (5.785GHz) */
+ {161, (3 << 18) | 0x305c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A9C6}, /* 161 (5.805GHz) */
+
+ /* Japan */
+ { 184, (3 << 18) | 0x308c2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 184 (4.920GHz) */
+ { 188, (3 << 18) | 0x328c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 188 (4.940GHz) */
+ { 192, (3 << 18) | 0x318c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 192 (4.960GHz) */
+ { 196, (3 << 18) | 0x338c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 196 (4.980GHz) */
+ { 8, (3 << 18) | 0x324c1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 8 (5.040GHz) */
+ { 12, (3 << 18) | 0x314c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 12 (5.060GHz) */
+ { 16, (3 << 18) | 0x334c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 16 (5.080GHz) */
+ { 34, (3 << 18) | 0x31cc2, (4 << 18) | 0x0b333, (5 << 18) | 0x2A946}, /* 34 (5.170GHz) */
+ { 38, (3 << 18) | 0x33cc1, (4 << 18) | 0x09999, (5 << 18) | 0x2A946}, /* 38 (5.190GHz) */
+ { 42, (3 << 18) | 0x302c1, (4 << 18) | 0x0a666, (5 << 18) | 0x2A946}, /* 42 (5.210GHz) */
+ { 46, (3 << 18) | 0x322c3, (4 << 18) | 0x08ccc, (5 << 18) | 0x2A946}, /* 46 (5.230GHz) */
};
-u32 maxim_317_channel_data_24[][3] =
-{
- {(0x03<<18)|0x30143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 01
- {(0x03<<18)|0x32140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 02
- {(0x03<<18)|0x32142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 03
- {(0x03<<18)|0x32143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 04
- {(0x03<<18)|0x31140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 05
- {(0x03<<18)|0x31142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 06
- {(0x03<<18)|0x31143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 07
- {(0x03<<18)|0x33140, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 08
- {(0x03<<18)|0x33142, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 09
- {(0x03<<18)|0x33143, (0x04<<18)|0x0accc, (0x05<<18)|0x28986}, // channe1 10
- {(0x03<<18)|0x30940, (0x04<<18)|0x09111, (0x05<<18)|0x28986}, // channe1 11
- {(0x03<<18)|0x30942, (0x04<<18)|0x0bbbb, (0x05<<18)|0x28986}, // channe1 12
- {(0x03<<18)|0x30943, (0x04<<18)|0x0accc, (0x05<<18)|0x28986} // channe1 13
+/*
+ * ====================================================================
+ * For MAXIM2825/6/7 Ver. 317 or less
+ *
+ * 0x00 0x00080
+ * 0x01 0x214c0
+ * 0x02 0x13802
+ *
+ * 2.4GHz Channels
+ * channe1 01 (2.412GHz); 0x03 0x30143 ;0x04 0x0accc
+ * channe1 02 (2.417GHz); 0x03 0x32140 ;0x04 0x09111
+ * channe1 03 (2.422GHz); 0x03 0x32142 ;0x04 0x0bbbb
+ * channe1 04 (2.427GHz); 0x03 0x32143 ;0x04 0x0accc
+ * channe1 05 (2.432GHz); 0x03 0x31140 ;0x04 0x09111
+ * channe1 06 (2.437GHz); 0x03 0x31142 ;0x04 0x0bbbb
+ * channe1 07 (2.442GHz); 0x03 0x31143 ;0x04 0x0accc
+ * channe1 08 (2.447GHz); 0x03 0x33140 ;0x04 0x09111
+ * channe1 09 (2.452GHz); 0x03 0x33142 ;0x04 0x0bbbb
+ * channe1 10 (2.457GHz); 0x03 0x33143 ;0x04 0x0accc
+ * channe1 11 (2.462GHz); 0x03 0x30940 ;0x04 0x09111
+ * channe1 12 (2.467GHz); 0x03 0x30942 ;0x04 0x0bbbb
+ * channe1 13 (2.472GHz); 0x03 0x30943 ;0x04 0x0accc
+ *
+ * 5.0Ghz Channels
+ * channel 36 (5.180GHz); 0x03 0x33cc0 ;0x04 0x0b333
+ * channel 40 (5.200GHz); 0x03 0x302c0 ;0x04 0x08000
+ * channel 44 (5.220GHz); 0x03 0x302c2 ;0x04 0x0b333
+ * channel 48 (5.240GHz); 0x03 0x322c1 ;0x04 0x09999
+ * channel 52 (5.260GHz); 0x03 0x312c1 ;0x04 0x0a666
+ * channel 56 (5.280GHz); 0x03 0x332c3 ;0x04 0x08ccc
+ * channel 60 (5.300GHz); 0x03 0x30ac0 ;0x04 0x08000
+ * channel 64 (5.320GHz); 0x03 0x30ac2 ;0x04 0x08333
+ *
+ * 2.4GHz band ; 0x05 0x28986;
+ * 5.0GHz band ; 0x05 0x2a986
+ * 0x06 0x18008
+ * 0x07 0x38400
+ * 0x08 0x05108
+ * 0x09 0x27ff8
+ * 0x0a 0x14000
+ * 0x0b 0x37f99
+ * 0x0c 0x0c000
+ * ====================================================================
+ */
+u32 maxim_317_rf_data[] = {
+ (0x00 << 18) | 0x000a2,
+ (0x01 << 18) | 0x214c0,
+ (0x02 << 18) | 0x13802,
+ (0x03 << 18) | 0x30143,
+ (0x04 << 18) | 0x0accc,
+ (0x05 << 18) | 0x28986,
+ (0x06 << 18) | 0x18008,
+ (0x07 << 18) | 0x38400,
+ (0x08 << 18) | 0x05108,
+ (0x09 << 18) | 0x27ff8,
+ (0x0A << 18) | 0x14000,
+ (0x0B << 18) | 0x37f99,
+ (0x0C << 18) | 0x0c000
};
-u32 maxim_317_channel_data_50[][3] =
-{
- {(0x03<<18)|0x33cc0, (0x04<<18)|0x0b333, (0x05<<18)|0x2a986}, // channel 36
- {(0x03<<18)|0x302c0, (0x04<<18)|0x08000, (0x05<<18)|0x2a986}, // channel 40
- {(0x03<<18)|0x302c3, (0x04<<18)|0x0accc, (0x05<<18)|0x2a986}, // channel 44
- {(0x03<<18)|0x322c1, (0x04<<18)|0x09666, (0x05<<18)|0x2a986}, // channel 48
- {(0x03<<18)|0x312c2, (0x04<<18)|0x09999, (0x05<<18)|0x2a986}, // channel 52
- {(0x03<<18)|0x332c0, (0x04<<18)|0x0b333, (0x05<<18)|0x2a99e}, // channel 56
- {(0x03<<18)|0x30ac0, (0x04<<18)|0x08000, (0x05<<18)|0x2a99e}, // channel 60
- {(0x03<<18)|0x30ac3, (0x04<<18)|0x0accc, (0x05<<18)|0x2a99e} // channel 64
+u32 maxim_317_channel_data_24[][3] = {
+ {(0x03 << 18) | 0x30143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 01 */
+ {(0x03 << 18) | 0x32140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 02 */
+ {(0x03 << 18) | 0x32142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 03 */
+ {(0x03 << 18) | 0x32143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 04 */
+ {(0x03 << 18) | 0x31140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 05 */
+ {(0x03 << 18) | 0x31142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 06 */
+ {(0x03 << 18) | 0x31143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 07 */
+ {(0x03 << 18) | 0x33140, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 08 */
+ {(0x03 << 18) | 0x33142, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 09 */
+ {(0x03 << 18) | 0x33143, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986}, /* channe1 10 */
+ {(0x03 << 18) | 0x30940, (0x04 << 18) | 0x09111, (0x05 << 18) | 0x28986}, /* channe1 11 */
+ {(0x03 << 18) | 0x30942, (0x04 << 18) | 0x0bbbb, (0x05 << 18) | 0x28986}, /* channe1 12 */
+ {(0x03 << 18) | 0x30943, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x28986} /* channe1 13 */
};
-u32 maxim_317_power_data_24[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-u32 maxim_317_power_data_50[] = {(0x0C<<18)|0x0c000, (0x0C<<18)|0x0c100};
-
-/*****************************************************************************
-;;AL2230 MP (Mass Production Version)
-;;RF Registers Setting for Airoha AL2230 silicon after June 1st, 2004
-;;Updated by Tiger Huang (June 1st, 2004)
-;;20-bit length and LSB first
-
-;;Ch01 (2412MHz) ;0x00 0x09EFC ;0x01 0x8CCCC;
-;;Ch02 (2417MHz) ;0x00 0x09EFC ;0x01 0x8CCCD;
-;;Ch03 (2422MHz) ;0x00 0x09E7C ;0x01 0x8CCCC;
-;;Ch04 (2427MHz) ;0x00 0x09E7C ;0x01 0x8CCCD;
-;;Ch05 (2432MHz) ;0x00 0x05EFC ;0x01 0x8CCCC;
-;;Ch06 (2437MHz) ;0x00 0x05EFC ;0x01 0x8CCCD;
-;;Ch07 (2442MHz) ;0x00 0x05E7C ;0x01 0x8CCCC;
-;;Ch08 (2447MHz) ;0x00 0x05E7C ;0x01 0x8CCCD;
-;;Ch09 (2452MHz) ;0x00 0x0DEFC ;0x01 0x8CCCC;
-;;Ch10 (2457MHz) ;0x00 0x0DEFC ;0x01 0x8CCCD;
-;;Ch11 (2462MHz) ;0x00 0x0DE7C ;0x01 0x8CCCC;
-;;Ch12 (2467MHz) ;0x00 0x0DE7C ;0x01 0x8CCCD;
-;;Ch13 (2472MHz) ;0x00 0x03EFC ;0x01 0x8CCCC;
-;;Ch14 (2484Mhz) ;0x00 0x03E7C ;0x01 0x86666;
-
-0x02 0x401D8; RXDCOC BW 100Hz for RXHP low
-;;0x02 0x481DC; RXDCOC BW 30Khz for RXHP low
-
-0x03 0xCFFF0
-0x04 0x23800
-0x05 0xA3B72
-0x06 0x6DA01
-0x07 0xE1688
-0x08 0x11600
-0x09 0x99E02
-0x0A 0x5DDB0
-0x0B 0xD9900
-0x0C 0x3FFBD
-0x0D 0xB0000
-0x0F 0xF00A0
-
-;RF Calibration for Airoha AL2230
-;Edit by Ben Chang (01/30/04)
-;Updated by Tiger Huang (03/03/04)
-0x0f 0xf00a0 ; Initial Setting
-0x0f 0xf00b0 ; Activate TX DCC
-0x0f 0xf02a0 ; Activate Phase Calibration
-0x0f 0xf00e0 ; Activate Filter RC Calibration
-0x0f 0xf00a0 ; Restore Initial Setting
-*****************************************************************************/
-
-u32 al2230_rf_data[] =
-{
- (0x00<<20)|0x09EFC,
- (0x01<<20)|0x8CCCC,
- (0x02<<20)|0x40058,// 20060627 Anson 0x401D8,
- (0x03<<20)|0xCFFF0,
- (0x04<<20)|0x24100,// 20060627 Anson 0x23800,
- (0x05<<20)|0xA3B2F,// 20060627 Anson 0xA3B72
- (0x06<<20)|0x6DA01,
- (0x07<<20)|0xE3628,// 20060627 Anson 0xE1688,
- (0x08<<20)|0x11600,
- (0x09<<20)|0x9DC02,// 20060627 Anosn 0x97602,//0x99E02, //0x9AE02
- (0x0A<<20)|0x5ddb0, // 941206 For QCOM interference 0x588b0,//0x5DDB0, 940601 adj 0x5aa30 for bluetooth
- (0x0B<<20)|0xD9900,
- (0x0C<<20)|0x3FFBD,
- (0x0D<<20)|0xB0000,
- (0x0F<<20)|0xF01A0 // 20060627 Anson 0xF00A0
+u32 maxim_317_channel_data_50[][3] = {
+ {(0x03 << 18) | 0x33cc0, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2a986}, /* channel 36 */
+ {(0x03 << 18) | 0x302c0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2a986}, /* channel 40 */
+ {(0x03 << 18) | 0x302c3, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x2a986}, /* channel 44 */
+ {(0x03 << 18) | 0x322c1, (0x04 << 18) | 0x09666, (0x05 << 18) | 0x2a986}, /* channel 48 */
+ {(0x03 << 18) | 0x312c2, (0x04 << 18) | 0x09999, (0x05 << 18) | 0x2a986}, /* channel 52 */
+ {(0x03 << 18) | 0x332c0, (0x04 << 18) | 0x0b333, (0x05 << 18) | 0x2a99e}, /* channel 56 */
+ {(0x03 << 18) | 0x30ac0, (0x04 << 18) | 0x08000, (0x05 << 18) | 0x2a99e}, /* channel 60 */
+ {(0x03 << 18) | 0x30ac3, (0x04 << 18) | 0x0accc, (0x05 << 18) | 0x2a99e} /* channel 64 */
};
-u32 al2230s_rf_data[] =
-{
- (0x00<<20)|0x09EFC,
- (0x01<<20)|0x8CCCC,
- (0x02<<20)|0x40058,// 20060419 0x401D8,
- (0x03<<20)|0xCFFF0,
- (0x04<<20)|0x24100,// 20060419 0x23800,
- (0x05<<20)|0xA3B2F,// 20060419 0xA3B72,
- (0x06<<20)|0x6DA01,
- (0x07<<20)|0xE3628,// 20060419 0xE1688,
- (0x08<<20)|0x11600,
- (0x09<<20)|0x9DC02,// 20060419 0x97602,//0x99E02, //0x9AE02
- (0x0A<<20)|0x5DDB0,// 941206 For QCOM interference 0x588b0,//0x5DDB0, 940601 adj 0x5aa30 for bluetooth
- (0x0B<<20)|0xD9900,
- (0x0C<<20)|0x3FFBD,
- (0x0D<<20)|0xB0000,
- (0x0F<<20)|0xF01A0 // 20060419 0xF00A0
+u32 maxim_317_power_data_24[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+u32 maxim_317_power_data_50[] = {(0x0C << 18) | 0x0c000, (0x0C << 18) | 0x0c100};
+
+/*
+ * ===================================================================
+ * AL2230 MP (Mass Production Version)
+ * RF Registers Setting for Airoha AL2230 silicon after June 1st, 2004
+ * 20-bit length and LSB first
+ *
+ * Ch01 (2412MHz) ;0x00 0x09EFC ;0x01 0x8CCCC;
+ * Ch02 (2417MHz) ;0x00 0x09EFC ;0x01 0x8CCCD;
+ * Ch03 (2422MHz) ;0x00 0x09E7C ;0x01 0x8CCCC;
+ * Ch04 (2427MHz) ;0x00 0x09E7C ;0x01 0x8CCCD;
+ * Ch05 (2432MHz) ;0x00 0x05EFC ;0x01 0x8CCCC;
+ * Ch06 (2437MHz) ;0x00 0x05EFC ;0x01 0x8CCCD;
+ * Ch07 (2442MHz) ;0x00 0x05E7C ;0x01 0x8CCCC;
+ * Ch08 (2447MHz) ;0x00 0x05E7C ;0x01 0x8CCCD;
+ * Ch09 (2452MHz) ;0x00 0x0DEFC ;0x01 0x8CCCC;
+ * Ch10 (2457MHz) ;0x00 0x0DEFC ;0x01 0x8CCCD;
+ * Ch11 (2462MHz) ;0x00 0x0DE7C ;0x01 0x8CCCC;
+ * Ch12 (2467MHz) ;0x00 0x0DE7C ;0x01 0x8CCCD;
+ * Ch13 (2472MHz) ;0x00 0x03EFC ;0x01 0x8CCCC;
+ * Ch14 (2484Mhz) ;0x00 0x03E7C ;0x01 0x86666;
+ *
+ * 0x02 0x401D8; RXDCOC BW 100Hz for RXHP low
+ * 0x02 0x481DC; RXDCOC BW 30Khz for RXHP low
+ *
+ * 0x03 0xCFFF0
+ * 0x04 0x23800
+ * 0x05 0xA3B72
+ * 0x06 0x6DA01
+ * 0x07 0xE1688
+ * 0x08 0x11600
+ * 0x09 0x99E02
+ * 0x0A 0x5DDB0
+ * 0x0B 0xD9900
+ * 0x0C 0x3FFBD
+ * 0x0D 0xB0000
+ * 0x0F 0xF00A0
+ *
+ * RF Calibration for Airoha AL2230
+ *
+ * 0x0f 0xf00a0 ; Initial Setting
+ * 0x0f 0xf00b0 ; Activate TX DCC
+ * 0x0f 0xf02a0 ; Activate Phase Calibration
+ * 0x0f 0xf00e0 ; Activate Filter RC Calibration
+ * 0x0f 0xf00a0 ; Restore Initial Setting
+ * ==================================================================
+ */
+u32 al2230_rf_data[] = {
+ (0x00 << 20) | 0x09EFC,
+ (0x01 << 20) | 0x8CCCC,
+ (0x02 << 20) | 0x40058,
+ (0x03 << 20) | 0xCFFF0,
+ (0x04 << 20) | 0x24100,
+ (0x05 << 20) | 0xA3B2F,
+ (0x06 << 20) | 0x6DA01,
+ (0x07 << 20) | 0xE3628,
+ (0x08 << 20) | 0x11600,
+ (0x09 << 20) | 0x9DC02,
+ (0x0A << 20) | 0x5ddb0,
+ (0x0B << 20) | 0xD9900,
+ (0x0C << 20) | 0x3FFBD,
+ (0x0D << 20) | 0xB0000,
+ (0x0F << 20) | 0xF01A0
};
-u32 al2230_channel_data_24[][2] =
-{
- {(0x00<<20)|0x09EFC, (0x01<<20)|0x8CCCC}, // channe1 01
- {(0x00<<20)|0x09EFC, (0x01<<20)|0x8CCCD}, // channe1 02
- {(0x00<<20)|0x09E7C, (0x01<<20)|0x8CCCC}, // channe1 03
- {(0x00<<20)|0x09E7C, (0x01<<20)|0x8CCCD}, // channe1 04
- {(0x00<<20)|0x05EFC, (0x01<<20)|0x8CCCC}, // channe1 05
- {(0x00<<20)|0x05EFC, (0x01<<20)|0x8CCCD}, // channe1 06
- {(0x00<<20)|0x05E7C, (0x01<<20)|0x8CCCC}, // channe1 07
- {(0x00<<20)|0x05E7C, (0x01<<20)|0x8CCCD}, // channe1 08
- {(0x00<<20)|0x0DEFC, (0x01<<20)|0x8CCCC}, // channe1 09
- {(0x00<<20)|0x0DEFC, (0x01<<20)|0x8CCCD}, // channe1 10
- {(0x00<<20)|0x0DE7C, (0x01<<20)|0x8CCCC}, // channe1 11
- {(0x00<<20)|0x0DE7C, (0x01<<20)|0x8CCCD}, // channe1 12
- {(0x00<<20)|0x03EFC, (0x01<<20)|0x8CCCC}, // channe1 13
- {(0x00<<20)|0x03E7C, (0x01<<20)|0x86666} // channe1 14
+u32 al2230s_rf_data[] = {
+ (0x00 << 20) | 0x09EFC,
+ (0x01 << 20) | 0x8CCCC,
+ (0x02 << 20) | 0x40058,
+ (0x03 << 20) | 0xCFFF0,
+ (0x04 << 20) | 0x24100,
+ (0x05 << 20) | 0xA3B2F,
+ (0x06 << 20) | 0x6DA01,
+ (0x07 << 20) | 0xE3628,
+ (0x08 << 20) | 0x11600,
+ (0x09 << 20) | 0x9DC02,
+ (0x0A << 20) | 0x5DDB0,
+ (0x0B << 20) | 0xD9900,
+ (0x0C << 20) | 0x3FFBD,
+ (0x0D << 20) | 0xB0000,
+ (0x0F << 20) | 0xF01A0
};
-// Current setting. u32 airoha_power_data_24[] = {(0x09<<20)|0x90202, (0x09<<20)|0x96602, (0x09<<20)|0x97602};
-#define AIROHA_TXVGA_LOW_INDEX 31 // Index for 0x90202
-#define AIROHA_TXVGA_MIDDLE_INDEX 12 // Index for 0x96602
-#define AIROHA_TXVGA_HIGH_INDEX 8 // Index for 0x97602 1.0.24.0 1.0.28.0
-/*
-u32 airoha_power_data_24[] =
-{
- 0x9FE02, // Max - 0 dB
- 0x9BE02, // Max - 1 dB
- 0x9DE02, // Max - 2 dB
- 0x99E02, // Max - 3 dB
- 0x9EE02, // Max - 4 dB
- 0x9AE02, // Max - 5 dB
- 0x9CE02, // Max - 6 dB
- 0x98E02, // Max - 7 dB
- 0x97602, // Max - 8 dB
- 0x93602, // Max - 9 dB
- 0x95602, // Max - 10 dB
- 0x91602, // Max - 11 dB
- 0x96602, // Max - 12 dB
- 0x92602, // Max - 13 dB
- 0x94602, // Max - 14 dB
- 0x90602, // Max - 15 dB
- 0x97A02, // Max - 16 dB
- 0x93A02, // Max - 17 dB
- 0x95A02, // Max - 18 dB
- 0x91A02, // Max - 19 dB
- 0x96A02, // Max - 20 dB
- 0x92A02, // Max - 21 dB
- 0x94A02, // Max - 22 dB
- 0x90A02, // Max - 23 dB
- 0x97202, // Max - 24 dB
- 0x93202, // Max - 25 dB
- 0x95202, // Max - 26 dB
- 0x91202, // Max - 27 dB
- 0x96202, // Max - 28 dB
- 0x92202, // Max - 29 dB
- 0x94202, // Max - 30 dB
- 0x90202 // Max - 31 dB
+u32 al2230_channel_data_24[][2] = {
+ {(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 01 */
+ {(0x00 << 20) | 0x09EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 02 */
+ {(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 03 */
+ {(0x00 << 20) | 0x09E7C, (0x01 << 20) | 0x8CCCD}, /* channe1 04 */
+ {(0x00 << 20) | 0x05EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 05 */
+ {(0x00 << 20) | 0x05EFC, (0x01 << 20) | 0x8CCCD}, /* channe1 06 */
+ {(0x00 << 20) | 0x05E7C, (0x01 << 20) | 0x8CCCC}, /* channe1 07 */
+ {(0x00 << 20) | 0x05E7C, (0x01 << 20) | 0x8CCCD}, /* channe1 08 */
+ {(0x00 << 20) | 0x0DEFC, (0x01 << 20) | 0x8CCCC}, /* channe1 09 */
+ {(0x00 << 20) | 0x0DEFC, (0x01 << 20) | 0x8CCCD}, /* channe1 10 */
+ {(0x00 << 20) | 0x0DE7C, (0x01 << 20) | 0x8CCCC}, /* channe1 11 */
+ {(0x00 << 20) | 0x0DE7C, (0x01 << 20) | 0x8CCCD}, /* channe1 12 */
+ {(0x00 << 20) | 0x03EFC, (0x01 << 20) | 0x8CCCC}, /* channe1 13 */
+ {(0x00 << 20) | 0x03E7C, (0x01 << 20) | 0x86666} /* channe1 14 */
};
-*/
-// 20040927 1.1.69.1000 ybjiang
-// from John
-u32 al2230_txvga_data[][2] =
-{
- //value , index
+/* Current setting. u32 airoha_power_data_24[] = {(0x09 << 20) | 0x90202, (0x09 << 20) | 0x96602, (0x09 << 20) | 0x97602}; */
+#define AIROHA_TXVGA_LOW_INDEX 31 /* Index for 0x90202 */
+#define AIROHA_TXVGA_MIDDLE_INDEX 12 /* Index for 0x96602 */
+#define AIROHA_TXVGA_HIGH_INDEX 8 /* Index for 0x97602 1.0.24.0 1.0.28.0 */
+
+u32 al2230_txvga_data[][2] = {
+ /* value , index */
{0x090202, 0},
{0x094202, 2},
{0x092202, 4},
@@ -551,263 +489,242 @@ u32 al2230_txvga_data[][2] =
{0x09FE02, 63}
};
-//--------------------------------
-// For Airoha AL7230, 2.4Ghz band
-// Edit by Tiger, (March, 9, 2005)
-// 24bit, MSB first
-
-//channel independent registers:
-u32 al7230_rf_data_24[] =
-{
- (0x00<<24)|0x003790,
- (0x01<<24)|0x133331,
- (0x02<<24)|0x841FF2,
- (0x03<<24)|0x3FDFA3,
- (0x04<<24)|0x7FD784,
- (0x05<<24)|0x802B55,
- (0x06<<24)|0x56AF36,
- (0x07<<24)|0xCE0207,
- (0x08<<24)|0x6EBC08,
- (0x09<<24)|0x221BB9,
- (0x0A<<24)|0xE0000A,
- (0x0B<<24)|0x08071B,
- (0x0C<<24)|0x000A3C,
- (0x0D<<24)|0xFFFFFD,
- (0x0E<<24)|0x00000E,
- (0x0F<<24)|0x1ABA8F
+/*
+ * ==========================================
+ * For Airoha AL7230, 2.4Ghz band
+ * 24bit, MSB first
+ */
+
+/* channel independent registers: */
+u32 al7230_rf_data_24[] = {
+ (0x00 << 24) | 0x003790,
+ (0x01 << 24) | 0x133331,
+ (0x02 << 24) | 0x841FF2,
+ (0x03 << 24) | 0x3FDFA3,
+ (0x04 << 24) | 0x7FD784,
+ (0x05 << 24) | 0x802B55,
+ (0x06 << 24) | 0x56AF36,
+ (0x07 << 24) | 0xCE0207,
+ (0x08 << 24) | 0x6EBC08,
+ (0x09 << 24) | 0x221BB9,
+ (0x0A << 24) | 0xE0000A,
+ (0x0B << 24) | 0x08071B,
+ (0x0C << 24) | 0x000A3C,
+ (0x0D << 24) | 0xFFFFFD,
+ (0x0E << 24) | 0x00000E,
+ (0x0F << 24) | 0x1ABA8F
};
-u32 al7230_channel_data_24[][2] =
-{
- {(0x00<<24)|0x003790, (0x01<<24)|0x133331}, // channe1 01
- {(0x00<<24)|0x003790, (0x01<<24)|0x1B3331}, // channe1 02
- {(0x00<<24)|0x003790, (0x01<<24)|0x033331}, // channe1 03
- {(0x00<<24)|0x003790, (0x01<<24)|0x0B3331}, // channe1 04
- {(0x00<<24)|0x0037A0, (0x01<<24)|0x133331}, // channe1 05
- {(0x00<<24)|0x0037A0, (0x01<<24)|0x1B3331}, // channe1 06
- {(0x00<<24)|0x0037A0, (0x01<<24)|0x033331}, // channe1 07
- {(0x00<<24)|0x0037A0, (0x01<<24)|0x0B3331}, // channe1 08
- {(0x00<<24)|0x0037B0, (0x01<<24)|0x133331}, // channe1 09
- {(0x00<<24)|0x0037B0, (0x01<<24)|0x1B3331}, // channe1 10
- {(0x00<<24)|0x0037B0, (0x01<<24)|0x033331}, // channe1 11
- {(0x00<<24)|0x0037B0, (0x01<<24)|0x0B3331}, // channe1 12
- {(0x00<<24)|0x0037C0, (0x01<<24)|0x133331}, // channe1 13
- {(0x00<<24)|0x0037C0, (0x01<<24)|0x066661} // channel 14
+u32 al7230_channel_data_24[][2] = {
+ {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x133331}, /* channe1 01 */
+ {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x1B3331}, /* channe1 02 */
+ {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x033331}, /* channe1 03 */
+ {(0x00 << 24) | 0x003790, (0x01 << 24) | 0x0B3331}, /* channe1 04 */
+ {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x133331}, /* channe1 05 */
+ {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x1B3331}, /* channe1 06 */
+ {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x033331}, /* channe1 07 */
+ {(0x00 << 24) | 0x0037A0, (0x01 << 24) | 0x0B3331}, /* channe1 08 */
+ {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x133331}, /* channe1 09 */
+ {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x1B3331}, /* channe1 10 */
+ {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x033331}, /* channe1 11 */
+ {(0x00 << 24) | 0x0037B0, (0x01 << 24) | 0x0B3331}, /* channe1 12 */
+ {(0x00 << 24) | 0x0037C0, (0x01 << 24) | 0x133331}, /* channe1 13 */
+ {(0x00 << 24) | 0x0037C0, (0x01 << 24) | 0x066661} /* channel 14 */
};
-//channel independent registers:
-u32 al7230_rf_data_50[] =
-{
- (0x00<<24)|0x0FF520,
- (0x01<<24)|0x000001,
- (0x02<<24)|0x451FE2,
- (0x03<<24)|0x5FDFA3,
- (0x04<<24)|0x6FD784,
- (0x05<<24)|0x853F55,
- (0x06<<24)|0x56AF36,
- (0x07<<24)|0xCE0207,
- (0x08<<24)|0x6EBC08,
- (0x09<<24)|0x221BB9,
- (0x0A<<24)|0xE0600A,
- (0x0B<<24)|0x08044B,
- (0x0C<<24)|0x00143C,
- (0x0D<<24)|0xFFFFFD,
- (0x0E<<24)|0x00000E,
- (0x0F<<24)|0x12BACF //5Ghz default state
+/* channel independent registers: */
+u32 al7230_rf_data_50[] = {
+ (0x00 << 24) | 0x0FF520,
+ (0x01 << 24) | 0x000001,
+ (0x02 << 24) | 0x451FE2,
+ (0x03 << 24) | 0x5FDFA3,
+ (0x04 << 24) | 0x6FD784,
+ (0x05 << 24) | 0x853F55,
+ (0x06 << 24) | 0x56AF36,
+ (0x07 << 24) | 0xCE0207,
+ (0x08 << 24) | 0x6EBC08,
+ (0x09 << 24) | 0x221BB9,
+ (0x0A << 24) | 0xE0600A,
+ (0x0B << 24) | 0x08044B,
+ (0x0C << 24) | 0x00143C,
+ (0x0D << 24) | 0xFFFFFD,
+ (0x0E << 24) | 0x00000E,
+ (0x0F << 24) | 0x12BACF /* 5Ghz default state */
};
-u32 al7230_channel_data_5[][4] =
-{
- //channel dependent registers: 0x00, 0x01 and 0x04
- //11J ===========
- {184, (0x00<<24)|0x0FF520, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 184
- {188, (0x00<<24)|0x0FF520, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 188
- {192, (0x00<<24)|0x0FF530, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 192
- {196, (0x00<<24)|0x0FF530, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 196
- {8, (0x00<<24)|0x0FF540, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 008
- {12, (0x00<<24)|0x0FF540, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 012
- {16, (0x00<<24)|0x0FF550, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 016
- {34, (0x00<<24)|0x0FF560, (0x01<<24)|0x055551, (0x04<<24)|0x77F784}, // channel 034
- {38, (0x00<<24)|0x0FF570, (0x01<<24)|0x100001, (0x04<<24)|0x77F784}, // channel 038
- {42, (0x00<<24)|0x0FF570, (0x01<<24)|0x1AAAA1, (0x04<<24)|0x77F784}, // channel 042
- {46, (0x00<<24)|0x0FF570, (0x01<<24)|0x055551, (0x04<<24)|0x77F784}, // channel 046
- //11 A/H =========
- {36, (0x00<<24)|0x0FF560, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 036
- {40, (0x00<<24)|0x0FF570, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 040
- {44, (0x00<<24)|0x0FF570, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 044
- {48, (0x00<<24)|0x0FF570, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 048
- {52, (0x00<<24)|0x0FF580, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 052
- {56, (0x00<<24)|0x0FF580, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 056
- {60, (0x00<<24)|0x0FF580, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 060
- {64, (0x00<<24)|0x0FF590, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 064
- {100, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 100
- {104, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 104
- {108, (0x00<<24)|0x0FF5C0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 108
- {112, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 112
- {116, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 116
- {120, (0x00<<24)|0x0FF5D0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 120
- {124, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 124
- {128, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 128
- {132, (0x00<<24)|0x0FF5E0, (0x01<<24)|0x0AAAA1, (0x04<<24)|0x77F784}, // channel 132
- {136, (0x00<<24)|0x0FF5F0, (0x01<<24)|0x155551, (0x04<<24)|0x77F784}, // channel 136
- {140, (0x00<<24)|0x0FF5F0, (0x01<<24)|0x000001, (0x04<<24)|0x67F784}, // channel 140
- {149, (0x00<<24)|0x0FF600, (0x01<<24)|0x180001, (0x04<<24)|0x77F784}, // channel 149
- {153, (0x00<<24)|0x0FF600, (0x01<<24)|0x02AAA1, (0x04<<24)|0x77F784}, // channel 153
- {157, (0x00<<24)|0x0FF600, (0x01<<24)|0x0D5551, (0x04<<24)|0x77F784}, // channel 157
- {161, (0x00<<24)|0x0FF610, (0x01<<24)|0x180001, (0x04<<24)|0x77F784}, // channel 161
- {165, (0x00<<24)|0x0FF610, (0x01<<24)|0x02AAA1, (0x04<<24)|0x77F784} // channel 165
+u32 al7230_channel_data_5[][4] = {
+ /* channel dependent registers: 0x00, 0x01 and 0x04 */
+ /* 11J =========== */
+ {184, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 184 */
+ {188, (0x00 << 24) | 0x0FF520, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 188 */
+ {192, (0x00 << 24) | 0x0FF530, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 192 */
+ {196, (0x00 << 24) | 0x0FF530, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 196 */
+ {8, (0x00 << 24) | 0x0FF540, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 008 */
+ {12, (0x00 << 24) | 0x0FF540, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 012 */
+ {16, (0x00 << 24) | 0x0FF550, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 016 */
+ {34, (0x00 << 24) | 0x0FF560, (0x01 << 24) | 0x055551, (0x04 << 24) | 0x77F784}, /* channel 034 */
+ {38, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x100001, (0x04 << 24) | 0x77F784}, /* channel 038 */
+ {42, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x1AAAA1, (0x04 << 24) | 0x77F784}, /* channel 042 */
+ {46, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x055551, (0x04 << 24) | 0x77F784}, /* channel 046 */
+ /* 11 A/H ========= */
+ {36, (0x00 << 24) | 0x0FF560, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 036 */
+ {40, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 040 */
+ {44, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 044 */
+ {48, (0x00 << 24) | 0x0FF570, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 048 */
+ {52, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 052 */
+ {56, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 056 */
+ {60, (0x00 << 24) | 0x0FF580, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 060 */
+ {64, (0x00 << 24) | 0x0FF590, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 064 */
+ {100, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 100 */
+ {104, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 104 */
+ {108, (0x00 << 24) | 0x0FF5C0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 108 */
+ {112, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 112 */
+ {116, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 116 */
+ {120, (0x00 << 24) | 0x0FF5D0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 120 */
+ {124, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 124 */
+ {128, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 128 */
+ {132, (0x00 << 24) | 0x0FF5E0, (0x01 << 24) | 0x0AAAA1, (0x04 << 24) | 0x77F784}, /* channel 132 */
+ {136, (0x00 << 24) | 0x0FF5F0, (0x01 << 24) | 0x155551, (0x04 << 24) | 0x77F784}, /* channel 136 */
+ {140, (0x00 << 24) | 0x0FF5F0, (0x01 << 24) | 0x000001, (0x04 << 24) | 0x67F784}, /* channel 140 */
+ {149, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x180001, (0x04 << 24) | 0x77F784}, /* channel 149 */
+ {153, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x02AAA1, (0x04 << 24) | 0x77F784}, /* channel 153 */
+ {157, (0x00 << 24) | 0x0FF600, (0x01 << 24) | 0x0D5551, (0x04 << 24) | 0x77F784}, /* channel 157 */
+ {161, (0x00 << 24) | 0x0FF610, (0x01 << 24) | 0x180001, (0x04 << 24) | 0x77F784}, /* channel 161 */
+ {165, (0x00 << 24) | 0x0FF610, (0x01 << 24) | 0x02AAA1, (0x04 << 24) | 0x77F784} /* channel 165 */
};
-//; RF Calibration <=== Register 0x0F
-//0x0F 0x1ABA8F; start from 2.4Ghz default state
-//0x0F 0x9ABA8F; TXDC compensation
-//0x0F 0x3ABA8F; RXFIL adjustment
-//0x0F 0x1ABA8F; restore 2.4Ghz default state
-
-//;TXVGA Mapping Table <=== Register 0x0B
-u32 al7230_txvga_data[][2] =
-{
- {0x08040B, 0}, //TXVGA=0;
- {0x08041B, 1}, //TXVGA=1;
- {0x08042B, 2}, //TXVGA=2;
- {0x08043B, 3}, //TXVGA=3;
- {0x08044B, 4}, //TXVGA=4;
- {0x08045B, 5}, //TXVGA=5;
- {0x08046B, 6}, //TXVGA=6;
- {0x08047B, 7}, //TXVGA=7;
- {0x08048B, 8}, //TXVGA=8;
- {0x08049B, 9}, //TXVGA=9;
- {0x0804AB, 10}, //TXVGA=10;
- {0x0804BB, 11}, //TXVGA=11;
- {0x0804CB, 12}, //TXVGA=12;
- {0x0804DB, 13}, //TXVGA=13;
- {0x0804EB, 14}, //TXVGA=14;
- {0x0804FB, 15}, //TXVGA=15;
- {0x08050B, 16}, //TXVGA=16;
- {0x08051B, 17}, //TXVGA=17;
- {0x08052B, 18}, //TXVGA=18;
- {0x08053B, 19}, //TXVGA=19;
- {0x08054B, 20}, //TXVGA=20;
- {0x08055B, 21}, //TXVGA=21;
- {0x08056B, 22}, //TXVGA=22;
- {0x08057B, 23}, //TXVGA=23;
- {0x08058B, 24}, //TXVGA=24;
- {0x08059B, 25}, //TXVGA=25;
- {0x0805AB, 26}, //TXVGA=26;
- {0x0805BB, 27}, //TXVGA=27;
- {0x0805CB, 28}, //TXVGA=28;
- {0x0805DB, 29}, //TXVGA=29;
- {0x0805EB, 30}, //TXVGA=30;
- {0x0805FB, 31}, //TXVGA=31;
- {0x08060B, 32}, //TXVGA=32;
- {0x08061B, 33}, //TXVGA=33;
- {0x08062B, 34}, //TXVGA=34;
- {0x08063B, 35}, //TXVGA=35;
- {0x08064B, 36}, //TXVGA=36;
- {0x08065B, 37}, //TXVGA=37;
- {0x08066B, 38}, //TXVGA=38;
- {0x08067B, 39}, //TXVGA=39;
- {0x08068B, 40}, //TXVGA=40;
- {0x08069B, 41}, //TXVGA=41;
- {0x0806AB, 42}, //TXVGA=42;
- {0x0806BB, 43}, //TXVGA=43;
- {0x0806CB, 44}, //TXVGA=44;
- {0x0806DB, 45}, //TXVGA=45;
- {0x0806EB, 46}, //TXVGA=46;
- {0x0806FB, 47}, //TXVGA=47;
- {0x08070B, 48}, //TXVGA=48;
- {0x08071B, 49}, //TXVGA=49;
- {0x08072B, 50}, //TXVGA=50;
- {0x08073B, 51}, //TXVGA=51;
- {0x08074B, 52}, //TXVGA=52;
- {0x08075B, 53}, //TXVGA=53;
- {0x08076B, 54}, //TXVGA=54;
- {0x08077B, 55}, //TXVGA=55;
- {0x08078B, 56}, //TXVGA=56;
- {0x08079B, 57}, //TXVGA=57;
- {0x0807AB, 58}, //TXVGA=58;
- {0x0807BB, 59}, //TXVGA=59;
- {0x0807CB, 60}, //TXVGA=60;
- {0x0807DB, 61}, //TXVGA=61;
- {0x0807EB, 62}, //TXVGA=62;
- {0x0807FB, 63}, //TXVGA=63;
+/*
+ * RF Calibration <=== Register 0x0F
+ * 0x0F 0x1ABA8F; start from 2.4Ghz default state
+ * 0x0F 0x9ABA8F; TXDC compensation
+ * 0x0F 0x3ABA8F; RXFIL adjustment
+ * 0x0F 0x1ABA8F; restore 2.4Ghz default state
+ */
+
+/* TXVGA Mapping Table <=== Register 0x0B */
+u32 al7230_txvga_data[][2] = {
+ {0x08040B, 0}, /* TXVGA = 0; */
+ {0x08041B, 1}, /* TXVGA = 1; */
+ {0x08042B, 2}, /* TXVGA = 2; */
+ {0x08043B, 3}, /* TXVGA = 3; */
+ {0x08044B, 4}, /* TXVGA = 4; */
+ {0x08045B, 5}, /* TXVGA = 5; */
+ {0x08046B, 6}, /* TXVGA = 6; */
+ {0x08047B, 7}, /* TXVGA = 7; */
+ {0x08048B, 8}, /* TXVGA = 8; */
+ {0x08049B, 9}, /* TXVGA = 9; */
+ {0x0804AB, 10}, /* TXVGA = 10; */
+ {0x0804BB, 11}, /* TXVGA = 11; */
+ {0x0804CB, 12}, /* TXVGA = 12; */
+ {0x0804DB, 13}, /* TXVGA = 13; */
+ {0x0804EB, 14}, /* TXVGA = 14; */
+ {0x0804FB, 15}, /* TXVGA = 15; */
+ {0x08050B, 16}, /* TXVGA = 16; */
+ {0x08051B, 17}, /* TXVGA = 17; */
+ {0x08052B, 18}, /* TXVGA = 18; */
+ {0x08053B, 19}, /* TXVGA = 19; */
+ {0x08054B, 20}, /* TXVGA = 20; */
+ {0x08055B, 21}, /* TXVGA = 21; */
+ {0x08056B, 22}, /* TXVGA = 22; */
+ {0x08057B, 23}, /* TXVGA = 23; */
+ {0x08058B, 24}, /* TXVGA = 24; */
+ {0x08059B, 25}, /* TXVGA = 25; */
+ {0x0805AB, 26}, /* TXVGA = 26; */
+ {0x0805BB, 27}, /* TXVGA = 27; */
+ {0x0805CB, 28}, /* TXVGA = 28; */
+ {0x0805DB, 29}, /* TXVGA = 29; */
+ {0x0805EB, 30}, /* TXVGA = 30; */
+ {0x0805FB, 31}, /* TXVGA = 31; */
+ {0x08060B, 32}, /* TXVGA = 32; */
+ {0x08061B, 33}, /* TXVGA = 33; */
+ {0x08062B, 34}, /* TXVGA = 34; */
+ {0x08063B, 35}, /* TXVGA = 35; */
+ {0x08064B, 36}, /* TXVGA = 36; */
+ {0x08065B, 37}, /* TXVGA = 37; */
+ {0x08066B, 38}, /* TXVGA = 38; */
+ {0x08067B, 39}, /* TXVGA = 39; */
+ {0x08068B, 40}, /* TXVGA = 40; */
+ {0x08069B, 41}, /* TXVGA = 41; */
+ {0x0806AB, 42}, /* TXVGA = 42; */
+ {0x0806BB, 43}, /* TXVGA = 43; */
+ {0x0806CB, 44}, /* TXVGA = 44; */
+ {0x0806DB, 45}, /* TXVGA = 45; */
+ {0x0806EB, 46}, /* TXVGA = 46; */
+ {0x0806FB, 47}, /* TXVGA = 47; */
+ {0x08070B, 48}, /* TXVGA = 48; */
+ {0x08071B, 49}, /* TXVGA = 49; */
+ {0x08072B, 50}, /* TXVGA = 50; */
+ {0x08073B, 51}, /* TXVGA = 51; */
+ {0x08074B, 52}, /* TXVGA = 52; */
+ {0x08075B, 53}, /* TXVGA = 53; */
+ {0x08076B, 54}, /* TXVGA = 54; */
+ {0x08077B, 55}, /* TXVGA = 55; */
+ {0x08078B, 56}, /* TXVGA = 56; */
+ {0x08079B, 57}, /* TXVGA = 57; */
+ {0x0807AB, 58}, /* TXVGA = 58; */
+ {0x0807BB, 59}, /* TXVGA = 59; */
+ {0x0807CB, 60}, /* TXVGA = 60; */
+ {0x0807DB, 61}, /* TXVGA = 61; */
+ {0x0807EB, 62}, /* TXVGA = 62; */
+ {0x0807FB, 63}, /* TXVGA = 63; */
};
-//--------------------------------
-
+/* ============================================= */
-//; W89RF242 RFIC SPI programming initial data
-//; Winbond WLAN 11g RFIC BB-SPI register -- version FA5976A rev 1.3b
-//; Update Date: Ocotber 3, 2005 by PP10 Hsiang-Te Ho
-//;
-//; Version 1.3b revision items: (Oct. 1, 2005 by HTHo) for FA5976A
-u32 w89rf242_rf_data[] =
-{
- (0x00<<24)|0xF86100, // 20060721 0xF86100, //; 3E184; MODA (0x00) -- Normal mode ; calibration off
- (0x01<<24)|0xEFFFC2, //; 3BFFF; MODB (0x01) -- turn off RSSI, and other circuits are turned on
- (0x02<<24)|0x102504, //; 04094; FSET (0x02) -- default 20MHz crystal ; Icmp=1.5mA
- (0x03<<24)|0x026286, //; 0098A; FCHN (0x03) -- default CH7, 2442MHz
- (0x04<<24)|0x000208, // 20060612.1.a 0x0002C8, // 20050818 // 20050816 0x000388
- //; 02008; FCAL (0x04) -- XTAL Freq Trim=001000 (socket board#1); FA5976AYG_v1.3C
- (0x05<<24)|0x24C60A, // 20060612.1.a 0x24C58A, // 941003 0x24C48A, // 20050818.2 0x24848A, // 20050818 // 20050816 0x24C48A
- //; 09316; GANA (0x05) -- TX VGA default (TXVGA=0x18(12)) & TXGPK=110 ; FA5976A_1.3D
- (0x06<<24)|0x3432CC, // 941003 0x26C34C, // 20050818 0x06B40C
- //; 0D0CB; GANB (0x06) -- RXDC(DC offset) on; LNA=11; RXVGA=001011(11) ; RXFLSW=11(010001); RXGPK=00; RXGCF=00; -50dBm input
- (0x07<<24)|0x0C68CE, // 20050818.2 0x0C66CE, // 20050818 // 20050816 0x0C68CE
- //; 031A3; FILT (0x07) -- TX/RX filter with auto-tuning; TFLBW=011; RFLBW=100
- (0x08<<24)|0x100010, //; 04000; TCAL (0x08) -- //for LO
- (0x09<<24)|0x004012, // 20060612.1.a 0x6E4012, // 0x004012,
- //; 1B900; RCALA (0x09) -- FASTS=11; HPDE=01 (100nsec); SEHP=1 (select B0 pin=RXHP); RXHP=1 (Turn on RXHP function)(FA5976A_1.3C)
- (0x0A<<24)|0x704014, //; 1C100; RCALB (0x0A)
- (0x0B<<24)|0x18BDD6, // 941003 0x1805D6, // 20050818.2 0x1801D6, // 20050818 // 20050816 0x1805D6
- //; 062F7; IQCAL (0x0B) -- Turn on LO phase tuner=0111 & RX-LO phase = 0111; FA5976A_1.3B (2005/09/29)
- (0x0C<<24)|0x575558, // 20050818.2 0x555558, // 20050818 // 20050816 0x575558
- //; 15D55 ; IBSA (0x0C) -- IFPre =11 ; TC5376A_v1.3A for corner
- (0x0D<<24)|0x55545A, // 20060612.1.a 0x55555A,
- //; 15555 ; IBSB (0x0D)
- (0x0E<<24)|0x5557DC, // 20060612.1.a 0x55555C, // 941003 0x5557DC,
- //; 1555F ; IBSC (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F (2005/11/25)
- (0x10<<24)|0x000C20, // 941003 0x000020, // 20050818
- //; 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB
- (0x11<<24)|0x0C0022, // 941003 0x030022 // 20050818.2 0x030022 // 20050818 // 20050816 0x0C0022
- //; 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C)
- (0x12<<24)|0x000024 // 20060612.1.a 0x001824 // 941003 add
- //; TMODC (0x12) -- Turn OFF Tempearure sensor
+/*
+ * W89RF242 RFIC SPI programming initial data
+ * Winbond WLAN 11g RFIC BB-SPI register -- version FA5976A rev 1.3b
+ */
+u32 w89rf242_rf_data[] = {
+ (0x00 << 24) | 0xF86100, /* 3E184; MODA (0x00) -- Normal mode ; calibration off */
+ (0x01 << 24) | 0xEFFFC2, /* 3BFFF; MODB (0x01) -- turn off RSSI, and other circuits are turned on */
+ (0x02 << 24) | 0x102504, /* 04094; FSET (0x02) -- default 20MHz crystal ; Icmp=1.5mA */
+ (0x03 << 24) | 0x026286, /* 0098A; FCHN (0x03) -- default CH7, 2442MHz */
+ (0x04 << 24) | 0x000208, /* 02008; FCAL (0x04) -- XTAL Freq Trim=001000 (socket board#1); FA5976AYG_v1.3C */
+ (0x05 << 24) | 0x24C60A, /* 09316; GANA (0x05) -- TX VGA default (TXVGA=0x18(12)) & TXGPK=110 ; FA5976A_1.3D */
+ (0x06 << 24) | 0x3432CC, /* 0D0CB; GANB (0x06) -- RXDC(DC offset) on; LNA=11; RXVGA=001011(11) ; RXFLSW=11(010001); RXGPK=00; RXGCF=00; -50dBm input */
+ (0x07 << 24) | 0x0C68CE, /* 031A3; FILT (0x07) -- TX/RX filter with auto-tuning; TFLBW=011; RFLBW=100 */
+ (0x08 << 24) | 0x100010, /* 04000; TCAL (0x08) -- for LO */
+ (0x09 << 24) | 0x004012, /* 1B900; RCALA (0x09) -- FASTS=11; HPDE=01 (100nsec); SEHP=1 (select B0 pin=RXHP); RXHP=1 (Turn on RXHP function)(FA5976A_1.3C) */
+ (0x0A << 24) | 0x704014, /* 1C100; RCALB (0x0A) */
+ (0x0B << 24) | 0x18BDD6, /* 062F7; IQCAL (0x0B) -- Turn on LO phase tuner=0111 & RX-LO phase = 0111; FA5976A_1.3B */
+ (0x0C << 24) | 0x575558, /* 15D55 ; IBSA (0x0C) -- IFPre =11 ; TC5376A_v1.3A for corner */
+ (0x0D << 24) | 0x55545A, /* 15555 ; IBSB (0x0D) */
+ (0x0E << 24) | 0x5557DC, /* 1555F ; IBSC (0x0E) -- IRLNA & IRLNB (PTAT & Const current)=01/01; FA5976B_1.3F */
+ (0x10 << 24) | 0x000C20, /* 00030 ; TMODA (0x10) -- LNA_gain_step=0011 ; LNA=15/16dB */
+ (0x11 << 24) | 0x0C0022, /* 03000 ; TMODB (0x11) -- Turn ON RX-Q path Test Switch; To improve IQ path group delay (FA5976A_1.3C) */
+ (0x12 << 24) | 0x000024 /* TMODC (0x12) -- Turn OFF Tempearure sensor */
};
-u32 w89rf242_channel_data_24[][2] =
-{
- {(0x03<<24)|0x025B06, (0x04<<24)|0x080408}, // channe1 01
- {(0x03<<24)|0x025C46, (0x04<<24)|0x080408}, // channe1 02
- {(0x03<<24)|0x025D86, (0x04<<24)|0x080408}, // channe1 03
- {(0x03<<24)|0x025EC6, (0x04<<24)|0x080408}, // channe1 04
- {(0x03<<24)|0x026006, (0x04<<24)|0x080408}, // channe1 05
- {(0x03<<24)|0x026146, (0x04<<24)|0x080408}, // channe1 06
- {(0x03<<24)|0x026286, (0x04<<24)|0x080408}, // channe1 07
- {(0x03<<24)|0x0263C6, (0x04<<24)|0x080408}, // channe1 08
- {(0x03<<24)|0x026506, (0x04<<24)|0x080408}, // channe1 09
- {(0x03<<24)|0x026646, (0x04<<24)|0x080408}, // channe1 10
- {(0x03<<24)|0x026786, (0x04<<24)|0x080408}, // channe1 11
- {(0x03<<24)|0x0268C6, (0x04<<24)|0x080408}, // channe1 12
- {(0x03<<24)|0x026A06, (0x04<<24)|0x080408}, // channe1 13
- {(0x03<<24)|0x026D06, (0x04<<24)|0x080408} // channe1 14
+u32 w89rf242_channel_data_24[][2] = {
+ {(0x03 << 24) | 0x025B06, (0x04 << 24) | 0x080408}, /* channe1 01 */
+ {(0x03 << 24) | 0x025C46, (0x04 << 24) | 0x080408}, /* channe1 02 */
+ {(0x03 << 24) | 0x025D86, (0x04 << 24) | 0x080408}, /* channe1 03 */
+ {(0x03 << 24) | 0x025EC6, (0x04 << 24) | 0x080408}, /* channe1 04 */
+ {(0x03 << 24) | 0x026006, (0x04 << 24) | 0x080408}, /* channe1 05 */
+ {(0x03 << 24) | 0x026146, (0x04 << 24) | 0x080408}, /* channe1 06 */
+ {(0x03 << 24) | 0x026286, (0x04 << 24) | 0x080408}, /* channe1 07 */
+ {(0x03 << 24) | 0x0263C6, (0x04 << 24) | 0x080408}, /* channe1 08 */
+ {(0x03 << 24) | 0x026506, (0x04 << 24) | 0x080408}, /* channe1 09 */
+ {(0x03 << 24) | 0x026646, (0x04 << 24) | 0x080408}, /* channe1 10 */
+ {(0x03 << 24) | 0x026786, (0x04 << 24) | 0x080408}, /* channe1 11 */
+ {(0x03 << 24) | 0x0268C6, (0x04 << 24) | 0x080408}, /* channe1 12 */
+ {(0x03 << 24) | 0x026A06, (0x04 << 24) | 0x080408}, /* channe1 13 */
+ {(0x03 << 24) | 0x026D06, (0x04 << 24) | 0x080408} /* channe1 14 */
};
-u32 w89rf242_power_data_24[] = {(0x05<<24)|0x24C48A, (0x05<<24)|0x24C48A, (0x05<<24)|0x24C48A};
+u32 w89rf242_power_data_24[] = {(0x05 << 24) | 0x24C48A, (0x05 << 24) | 0x24C48A, (0x05 << 24) | 0x24C48A};
-// 20060315.6 Enlarge for new scale
-// 20060316.6 20060619.2.a add mapping array
-u32 w89rf242_txvga_old_mapping[][2] =
-{
- {0, 0} , // New <-> Old
+u32 w89rf242_txvga_old_mapping[][2] = {
+ {0, 0} , /* New <-> Old */
{1, 1} ,
{2, 2} ,
{3, 3} ,
{4, 4} ,
{6, 5} ,
- {8, 6 },
- {10, 7 },
- {12, 8 },
- {14, 9 },
+ {8, 6},
+ {10, 7},
+ {12, 8},
+ {14, 9},
{16, 10},
{18, 11},
{20, 12},
@@ -818,1704 +735,1513 @@ u32 w89rf242_txvga_old_mapping[][2] =
{30, 17},
{32, 18},
{34, 19},
+};
+u32 w89rf242_txvga_data[][5] = {
+ /* low gain mode */
+ {(0x05 << 24) | 0x24C00A, 0, 0x00292315, 0x0800FEFF, 0x52523131}, /* min gain */
+ {(0x05 << 24) | 0x24C80A, 1, 0x00292315, 0x0800FEFF, 0x52523131},
+ {(0x05 << 24) | 0x24C04A, 2, 0x00292315, 0x0800FEFF, 0x52523131}, /* (default) +14dBm (ANT) */
+ {(0x05 << 24) | 0x24C84A, 3, 0x00292315, 0x0800FEFF, 0x52523131},
-};
+ /* TXVGA=0x10 */
+ {(0x05 << 24) | 0x24C40A, 4, 0x00292315, 0x0800FEFF, 0x60603838},
+ {(0x05 << 24) | 0x24C40A, 5, 0x00262114, 0x0700FEFF, 0x65653B3B},
-// 20060619.3 modify from Bruce's mail
-u32 w89rf242_txvga_data[][5] =
-{
- //low gain mode
- { (0x05<<24)|0x24C00A, 0, 0x00292315, 0x0800FEFF, 0x52523131 },// ; min gain
- { (0x05<<24)|0x24C80A, 1, 0x00292315, 0x0800FEFF, 0x52523131 },
- { (0x05<<24)|0x24C04A, 2, 0x00292315, 0x0800FEFF, 0x52523131 },// (default) +14dBm (ANT)
- { (0x05<<24)|0x24C84A, 3, 0x00292315, 0x0800FEFF, 0x52523131 },
-
- //TXVGA=0x10
- { (0x05<<24)|0x24C40A, 4, 0x00292315, 0x0800FEFF, 0x60603838 },
- { (0x05<<24)|0x24C40A, 5, 0x00262114, 0x0700FEFF, 0x65653B3B },
-
- //TXVGA=0x11
- { (0x05<<24)|0x24C44A, 6, 0x00241F13, 0x0700FFFF, 0x58583333 },
- { (0x05<<24)|0x24C44A, 7, 0x00292315, 0x0800FEFF, 0x5E5E3737 },
-
- //TXVGA=0x12
- { (0x05<<24)|0x24C48A, 8, 0x00262114, 0x0700FEFF, 0x53533030 },
- { (0x05<<24)|0x24C48A, 9, 0x00241F13, 0x0700FFFF, 0x59593434 },
-
- //TXVGA=0x13
- { (0x05<<24)|0x24C4CA, 10, 0x00292315, 0x0800FEFF, 0x52523030 },
- { (0x05<<24)|0x24C4CA, 11, 0x00262114, 0x0700FEFF, 0x56563232 },
-
- //TXVGA=0x14
- { (0x05<<24)|0x24C50A, 12, 0x00292315, 0x0800FEFF, 0x54543131 },
- { (0x05<<24)|0x24C50A, 13, 0x00262114, 0x0700FEFF, 0x58583434 },
-
- //TXVGA=0x15
- { (0x05<<24)|0x24C54A, 14, 0x00292315, 0x0800FEFF, 0x54543131 },
- { (0x05<<24)|0x24C54A, 15, 0x00262114, 0x0700FEFF, 0x59593434 },
-
- //TXVGA=0x16
- { (0x05<<24)|0x24C58A, 16, 0x00292315, 0x0800FEFF, 0x55553131 },
- { (0x05<<24)|0x24C58A, 17, 0x00292315, 0x0800FEFF, 0x5B5B3535 },
-
- //TXVGA=0x17
- { (0x05<<24)|0x24C5CA, 18, 0x00262114, 0x0700FEFF, 0x51512F2F },
- { (0x05<<24)|0x24C5CA, 19, 0x00241F13, 0x0700FFFF, 0x55553131 },
-
- //TXVGA=0x18
- { (0x05<<24)|0x24C60A, 20, 0x00292315, 0x0800FEFF, 0x4F4F2E2E },
- { (0x05<<24)|0x24C60A, 21, 0x00262114, 0x0700FEFF, 0x53533030 },
-
- //TXVGA=0x19
- { (0x05<<24)|0x24C64A, 22, 0x00292315, 0x0800FEFF, 0x4E4E2D2D },
- { (0x05<<24)|0x24C64A, 23, 0x00262114, 0x0700FEFF, 0x53533030 },
-
- //TXVGA=0x1A
- { (0x05<<24)|0x24C68A, 24, 0x00292315, 0x0800FEFF, 0x50502E2E },
- { (0x05<<24)|0x24C68A, 25, 0x00262114, 0x0700FEFF, 0x55553131 },
-
- //TXVGA=0x1B
- { (0x05<<24)|0x24C6CA, 26, 0x00262114, 0x0700FEFF, 0x53533030 },
- { (0x05<<24)|0x24C6CA, 27, 0x00292315, 0x0800FEFF, 0x5A5A3434 },
-
- //TXVGA=0x1C
- { (0x05<<24)|0x24C70A, 28, 0x00292315, 0x0800FEFF, 0x55553131 },
- { (0x05<<24)|0x24C70A, 29, 0x00292315, 0x0800FEFF, 0x5D5D3636 },
-
- //TXVGA=0x1D
- { (0x05<<24)|0x24C74A, 30, 0x00292315, 0x0800FEFF, 0x5F5F3737 },
- { (0x05<<24)|0x24C74A, 31, 0x00262114, 0x0700FEFF, 0x65653B3B },
-
- //TXVGA=0x1E
- { (0x05<<24)|0x24C78A, 32, 0x00292315, 0x0800FEFF, 0x66663B3B },
- { (0x05<<24)|0x24C78A, 33, 0x00262114, 0x0700FEFF, 0x70704141 },
-
- //TXVGA=0x1F
- { (0x05<<24)|0x24C7CA, 34, 0x00292315, 0x0800FEFF, 0x72724242 }
+ /* TXVGA=0x11 */
+ { (0x05 << 24) | 0x24C44A, 6, 0x00241F13, 0x0700FFFF, 0x58583333},
+ { (0x05 << 24) | 0x24C44A, 7, 0x00292315, 0x0800FEFF, 0x5E5E3737},
+
+ /* TXVGA=0x12 */
+ {(0x05 << 24) | 0x24C48A, 8, 0x00262114, 0x0700FEFF, 0x53533030},
+ {(0x05 << 24) | 0x24C48A, 9, 0x00241F13, 0x0700FFFF, 0x59593434},
+
+ /* TXVGA=0x13 */
+ {(0x05 << 24) | 0x24C4CA, 10, 0x00292315, 0x0800FEFF, 0x52523030},
+ {(0x05 << 24) | 0x24C4CA, 11, 0x00262114, 0x0700FEFF, 0x56563232},
+
+ /* TXVGA=0x14 */
+ {(0x05 << 24) | 0x24C50A, 12, 0x00292315, 0x0800FEFF, 0x54543131},
+ {(0x05 << 24) | 0x24C50A, 13, 0x00262114, 0x0700FEFF, 0x58583434},
+
+ /* TXVGA=0x15 */
+ {(0x05 << 24) | 0x24C54A, 14, 0x00292315, 0x0800FEFF, 0x54543131},
+ {(0x05 << 24) | 0x24C54A, 15, 0x00262114, 0x0700FEFF, 0x59593434},
+
+ /* TXVGA=0x16 */
+ {(0x05 << 24) | 0x24C58A, 16, 0x00292315, 0x0800FEFF, 0x55553131},
+ {(0x05 << 24) | 0x24C58A, 17, 0x00292315, 0x0800FEFF, 0x5B5B3535},
+
+ /* TXVGA=0x17 */
+ {(0x05 << 24) | 0x24C5CA, 18, 0x00262114, 0x0700FEFF, 0x51512F2F},
+ {(0x05 << 24) | 0x24C5CA, 19, 0x00241F13, 0x0700FFFF, 0x55553131},
+
+ /* TXVGA=0x18 */
+ {(0x05 << 24) | 0x24C60A, 20, 0x00292315, 0x0800FEFF, 0x4F4F2E2E},
+ {(0x05 << 24) | 0x24C60A, 21, 0x00262114, 0x0700FEFF, 0x53533030},
+
+ /* TXVGA=0x19 */
+ {(0x05 << 24) | 0x24C64A, 22, 0x00292315, 0x0800FEFF, 0x4E4E2D2D},
+ {(0x05 << 24) | 0x24C64A, 23, 0x00262114, 0x0700FEFF, 0x53533030},
+
+ /* TXVGA=0x1A */
+ {(0x05 << 24) | 0x24C68A, 24, 0x00292315, 0x0800FEFF, 0x50502E2E},
+ {(0x05 << 24) | 0x24C68A, 25, 0x00262114, 0x0700FEFF, 0x55553131},
+
+ /* TXVGA=0x1B */
+ {(0x05 << 24) | 0x24C6CA, 26, 0x00262114, 0x0700FEFF, 0x53533030},
+ {(0x05 << 24) | 0x24C6CA, 27, 0x00292315, 0x0800FEFF, 0x5A5A3434},
+
+ /* TXVGA=0x1C */
+ {(0x05 << 24) | 0x24C70A, 28, 0x00292315, 0x0800FEFF, 0x55553131},
+ {(0x05 << 24) | 0x24C70A, 29, 0x00292315, 0x0800FEFF, 0x5D5D3636},
+
+ /* TXVGA=0x1D */
+ {(0x05 << 24) | 0x24C74A, 30, 0x00292315, 0x0800FEFF, 0x5F5F3737},
+ {(0x05 << 24) | 0x24C74A, 31, 0x00262114, 0x0700FEFF, 0x65653B3B},
+
+ /* TXVGA=0x1E */
+ {(0x05 << 24) | 0x24C78A, 32, 0x00292315, 0x0800FEFF, 0x66663B3B},
+ {(0x05 << 24) | 0x24C78A, 33, 0x00262114, 0x0700FEFF, 0x70704141},
+
+ /* TXVGA=0x1F */
+ {(0x05 << 24) | 0x24C7CA, 34, 0x00292315, 0x0800FEFF, 0x72724242}
};
-///////////////////////////////////////////////////////////////////////////////////////////////////
-///////////////////////////////////////////////////////////////////////////////////////////////////
-///////////////////////////////////////////////////////////////////////////////////////////////////
-
-
-
-//=============================================================================================================
-// Uxx_ReadEthernetAddress --
-//
-// Routine Description:
-// Reads in the Ethernet address from the IC.
-//
-// Arguments:
-// pHwData - The pHwData structure
-//
-// Return Value:
-//
-// The address is stored in EthernetIDAddr.
-//=============================================================================================================
-void
-Uxx_ReadEthernetAddress( struct hw_data * pHwData )
+/* ================================================================================================== */
+
+
+
+/*
+ * =============================================================================================================
+ * Uxx_ReadEthernetAddress --
+ *
+ * Routine Description:
+ * Reads in the Ethernet address from the IC.
+ *
+ * Arguments:
+ * pHwData - The pHwData structure
+ *
+ * Return Value:
+ *
+ * The address is stored in EthernetIDAddr.
+ * =============================================================================================================
+ */
+void Uxx_ReadEthernetAddress(struct hw_data *pHwData)
{
u32 ltmp;
- // Reading Ethernet address from EEPROM and set into hardware due to MAC address maybe change.
- // Only unplug and plug again can make hardware read EEPROM again. 20060727
- Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08000000 ); // Start EEPROM access + Read + address(0x0d)
- Wb35Reg_ReadSync( pHwData, 0x03b4, <mp );
- *(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian
- Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08010000 ); // Start EEPROM access + Read + address(0x0d)
- Wb35Reg_ReadSync( pHwData, 0x03b4, <mp );
- *(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
- Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08020000 ); // Start EEPROM access + Read + address(0x0d)
- Wb35Reg_ReadSync( pHwData, 0x03b4, <mp );
- *(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian
+ /*
+ * Reading Ethernet address from EEPROM and set into hardware due to MAC address maybe change.
+ * Only unplug and plug again can make hardware read EEPROM again.
+ */
+ Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08000000); /* Start EEPROM access + Read + address(0x0d) */
+ Wb35Reg_ReadSync(pHwData, 0x03b4, <mp);
+ *(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16) ltmp);
+ Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08010000); /* Start EEPROM access + Read + address(0x0d) */
+ Wb35Reg_ReadSync(pHwData, 0x03b4, <mp);
+ *(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16) ltmp);
+ Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08020000); /* Start EEPROM access + Read + address(0x0d) */
+ Wb35Reg_ReadSync(pHwData, 0x03b4, <mp);
+ *(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16) ltmp);
*(u16 *)(pHwData->PermanentMacAddress + 6) = 0;
- Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress) ); //20060926 anson's endian
- Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian
+ Wb35Reg_WriteSync(pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress));
+ Wb35Reg_WriteSync(pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress + 4)));
}
-//===============================================================================================================
-// CardGetMulticastBit --
-// Description:
-// For a given multicast address, returns the byte and bit in the card multicast registers that it hashes to.
-// Calls CardComputeCrc() to determine the CRC value.
-// Arguments:
-// Address - the address
-// Byte - the byte that it hashes to
-// Value - will have a 1 in the relevant bit
-// Return Value:
-// None.
-//==============================================================================================================
-void CardGetMulticastBit( u8 Address[ETH_ALEN], u8 *Byte, u8 *Value )
+/*
+ * ===============================================================================================================
+ * CardGetMulticastBit --
+ * Description:
+ * For a given multicast address, returns the byte and bit in the card multicast registers that it hashes to.
+ * Calls CardComputeCrc() to determine the CRC value.
+ * Arguments:
+ * Address - the address
+ * Byte - the byte that it hashes to
+ * Value - will have a 1 in the relevant bit
+ * Return Value:
+ * None.
+ * ==============================================================================================================
+ */
+void CardGetMulticastBit(u8 Address[ETH_ALEN], u8 *Byte, u8 *Value)
{
- u32 Crc;
- u32 BitNumber;
+ u32 Crc;
+ u32 BitNumber;
- // First compute the CRC.
- Crc = CardComputeCrc(Address, ETH_ALEN);
+ /* First compute the CRC. */
+ Crc = CardComputeCrc(Address, ETH_ALEN);
- // The computed CRC is bit0~31 from left to right
- //At first we should do right shift 25bits, and read 7bits by using '&', 2^7=128
+ /* The computed CRC is bit0~31 from left to right */
+ /* At first we should do right shift 25bits, and read 7bits by using '&', 2^7=128 */
BitNumber = (u32) ((Crc >> 26) & 0x3f);
- *Byte = (u8) (BitNumber >> 3);// 900514 original (BitNumber / 8)
- *Value = (u8) ((u8)1 << (BitNumber % 8));
+ *Byte = (u8) (BitNumber >> 3); /* 900514 original (BitNumber / 8) */
+ *Value = (u8) ((u8) 1 << (BitNumber % 8));
}
-void Uxx_power_on_procedure( struct hw_data * pHwData )
+void Uxx_power_on_procedure(struct hw_data *pHwData)
{
u32 ltmp, loop;
- if( pHwData->phy_type <= RF_MAXIM_V1 )
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xffffff38 );
- else
- {
- Wb35Reg_WriteSync( pHwData, 0x03f4, 0xFF5807FF );// 20060721 For NEW IC 0xFF5807FF
-
- // 20060511.1 Fix the following 4 steps for Rx of RF 2230 initial fail
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
- msleep(10); // Modify 20051221.1.b
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
- msleep(10); // Modify 20051221.1.b
-
+ if (pHwData->phy_type <= RF_MAXIM_V1)
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38);
+ else {
+ Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
+ msleep(10);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
ltmp = 0x4968;
- if( (pHwData->phy_type == RF_WB_242) ||
- (RF_WB_242_1 == pHwData->phy_type) ) // 20060619.5 Add
+ if ((pHwData->phy_type == RF_WB_242) ||
+ (RF_WB_242_1 == pHwData->phy_type))
ltmp = 0x4468;
- Wb35Reg_WriteSync( pHwData, 0x03d0, ltmp );
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
+ Wb35Reg_WriteSync(pHwData, 0x03d0, ltmp);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */
- msleep(20); // Modify 20051221.1.b
- Wb35Reg_ReadSync( pHwData, 0x03d0, <mp );
- loop = 500; // Wait for 5 second 20061101
- while( !(ltmp & 0x20) && loop-- )
- {
- msleep(10); // Modify 20051221.1.b
- if( !Wb35Reg_ReadSync( pHwData, 0x03d0, <mp ) )
+ msleep(20);
+ Wb35Reg_ReadSync(pHwData, 0x03d0, <mp);
+ loop = 500; /* Wait for 5 second */
+ while (!(ltmp & 0x20) && loop--) {
+ msleep(10);
+ if (!Wb35Reg_ReadSync(pHwData, 0x03d0, <mp))
break;
}
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */
}
- Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
- msleep(10); // Add this 20051221.1.b
+ Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */
+ msleep(10);
- // Set burst write delay
- Wb35Reg_WriteSync( pHwData, 0x03f8, 0x7ff );
+ /* Set burst write delay */
+ Wb35Reg_WriteSync(pHwData, 0x03f8, 0x7ff);
}
-void Set_ChanIndep_RfData_al7230_24( struct hw_data * pHwData, u32 *pltmp ,char number)
+void Set_ChanIndep_RfData_al7230_24(struct hw_data *pHwData, u32 *pltmp , char number)
{
u8 i;
- for( i=0; i<number; i++ )
- {
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al7230_rf_data_24[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_24[i]&0xffffff);
+ pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_24[i] & 0xffffff);
}
}
-void Set_ChanIndep_RfData_al7230_50( struct hw_data * pHwData, u32 *pltmp, char number)
+void Set_ChanIndep_RfData_al7230_50(struct hw_data *pHwData, u32 *pltmp, char number)
{
u8 i;
- for( i=0; i<number; i++ )
- {
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al7230_rf_data_50[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_50[i]&0xffffff);
+ pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_rf_data_50[i] & 0xffffff);
}
}
-//=============================================================================================================
-// RFSynthesizer_initial --
-//=============================================================================================================
-void
-RFSynthesizer_initial(struct hw_data * pHwData)
+/*
+ * =============================================================================================================
+ * RFSynthesizer_initial --
+ * =============================================================================================================
+ */
+void RFSynthesizer_initial(struct hw_data *pHwData)
{
u32 altmp[32];
- u32 * pltmp = altmp;
+ u32 *pltmp = altmp;
u32 ltmp;
- u8 number=0x00; // The number of register vale
+ u8 number = 0x00; /* The number of register vale */
u8 i;
- //
- // bit[31] SPI Enable.
- // 1=perform synthesizer program operation. This bit will
- // cleared automatically after the operation is completed.
- // bit[30] SPI R/W Control
- // 0=write, 1=read
- // bit[29:24] SPI Data Format Length
- // bit[17:4 ] RF Data bits.
- // bit[3 :0 ] RF address.
- switch( pHwData->phy_type )
- {
+ /*
+ * bit[31] SPI Enable.
+ * 1=perform synthesizer program operation. This bit will
+ * cleared automatically after the operation is completed.
+ * bit[30] SPI R/W Control
+ * 0=write, 1=read
+ * bit[29:24] SPI Data Format Length
+ * bit[17:4 ] RF Data bits.
+ * bit[3 :0 ] RF address.
+ */
+ switch (pHwData->phy_type) {
case RF_MAXIM_2825:
- case RF_MAXIM_V1: // 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331)
- number = sizeof(max2825_rf_data)/sizeof(max2825_rf_data[0]);
- for( i=0; i<number; i++ )
- {
- pHwData->phy_para[i] = max2825_rf_data[i];// Backup Rf parameter
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_rf_data[i], 18);
+ case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
+ number = sizeof(max2825_rf_data) / sizeof(max2825_rf_data[0]);
+ for (i = 0; i < number; i++) {
+ pHwData->phy_para[i] = max2825_rf_data[i]; /* Backup Rf parameter */
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_rf_data[i], 18);
}
break;
-
case RF_MAXIM_2827:
- number = sizeof(max2827_rf_data)/sizeof(max2827_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(max2827_rf_data) / sizeof(max2827_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2827_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_rf_data[i], 18);
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_rf_data[i], 18);
}
break;
-
case RF_MAXIM_2828:
- number = sizeof(max2828_rf_data)/sizeof(max2828_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(max2828_rf_data) / sizeof(max2828_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2828_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_rf_data[i], 18);
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_rf_data[i], 18);
}
break;
-
case RF_MAXIM_2829:
- number = sizeof(max2829_rf_data)/sizeof(max2829_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(max2829_rf_data) / sizeof(max2829_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = max2829_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_rf_data[i], 18);
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_rf_data[i], 18);
}
break;
-
case RF_AIROHA_2230:
- number = sizeof(al2230_rf_data)/sizeof(al2230_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(al2230_rf_data) / sizeof(al2230_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al2230_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[i], 20);
+ pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[i], 20);
}
break;
-
case RF_AIROHA_2230S:
- number = sizeof(al2230s_rf_data)/sizeof(al2230s_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ number = sizeof(al2230s_rf_data) / sizeof(al2230s_rf_data[0]);
+ for (i = 0; i < number; i++) {
pHwData->phy_para[i] = al2230s_rf_data[i];
- pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230s_rf_data[i], 20);
+ pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230s_rf_data[i], 20);
}
break;
-
case RF_AIROHA_7230:
-
- //Start to fill RF parameters, PLL_ON should be pulled low.
- Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
-#ifdef _PE_STATE_DUMP_
+ /* Start to fill RF parameters, PLL_ON should be pulled low. */
+ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
+ #ifdef _PE_STATE_DUMP_
printk("* PLL_ON low\n");
-#endif
-
- number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
+ #endif
+ number = sizeof(al7230_rf_data_24) / sizeof(al7230_rf_data_24[0]);
Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
break;
-
case RF_WB_242:
- case RF_WB_242_1: // 20060619.5 Add
- number = sizeof(w89rf242_rf_data)/sizeof(w89rf242_rf_data[0]);
- for( i=0; i<number; i++ )
- {
+ case RF_WB_242_1:
+ number = sizeof(w89rf242_rf_data) / sizeof(w89rf242_rf_data[0]);
+ for (i = 0; i < number; i++) {
ltmp = w89rf242_rf_data[i];
- if( i == 4 ) // Update the VCO trim from EEPROM
- {
- ltmp &= ~0xff0; // Mask bit4 ~bit11
- ltmp |= pHwData->VCO_trim<<4;
+ if (i == 4) { /* Update the VCO trim from EEPROM */
+ ltmp &= ~0xff0; /* Mask bit4 ~bit11 */
+ ltmp |= pHwData->VCO_trim << 4;
}
pHwData->phy_para[i] = ltmp;
- pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( ltmp, 24);
+ pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(ltmp, 24);
}
break;
}
pHwData->phy_number = number;
- // The 16 is the maximum capability of hardware. Here use 12
- if( number > 12 ) {
- //Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 12, NO_INCREMENT );
- for( i=0; i<12; i++ ) // For Al2230
- Wb35Reg_WriteSync( pHwData, 0x0864, pltmp[i] );
+ /* The 16 is the maximum capability of hardware. Here use 12 */
+ if (number > 12) {
+ for (i = 0; i < 12; i++) /* For Al2230 */
+ Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]);
pltmp += 12;
number -= 12;
}
- // Write to register. number must less and equal than 16
- for( i=0; i<number; i++ )
- Wb35Reg_WriteSync( pHwData, 0x864, pltmp[i] );
+ /* Write to register. number must less and equal than 16 */
+ for (i = 0; i < number; i++)
+ Wb35Reg_WriteSync(pHwData, 0x864, pltmp[i]);
- // 20060630.1 Calibration only 1 time
- if( pHwData->CalOneTime )
+ /* Calibration only 1 time */
+ if (pHwData->CalOneTime)
return;
pHwData->CalOneTime = 1;
- switch( pHwData->phy_type )
- {
- case RF_AIROHA_2230:
-
- // 20060511.1 --- Modifying the follow step for Rx issue-----------------
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x07<<20)|0xE168E, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(10);
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_rf_data[7], 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(10);
-
- case RF_AIROHA_2230S: // 20060420 Add this
-
- // 20060511.1 --- Modifying the follow step for Rx issue-----------------
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0x80 );// regulator on only
- msleep(10); // Modify 20051221.1.b
-
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xa0 );// PLL_PD REF_PD set to 0
- msleep(10); // Modify 20051221.1.b
-
- Wb35Reg_WriteSync( pHwData, 0x03d4, 0xe0 );// MLK_EN
- Wb35Reg_WriteSync( pHwData, 0x03b0, 1 );// Reset hardware first
- msleep(10); // Add this 20051221.1.b
- //------------------------------------------------------------------------
-
- // The follow code doesn't use the burst-write mode
- //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Raise Initial Setting
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- ltmp = pHwData->reg.BB5C & 0xfffff000;
- Wb35Reg_WriteSync( pHwData, 0x105c, ltmp );
- pHwData->reg.BB50 |= 0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060315.1 modify
- Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
- msleep(5);
-
- //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01B0); //Activate Filter Cal.
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01B0, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
-
- //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01e0); //Activate TX DCC
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01E0, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
-
- //phy_set_rf_data(phw_data, 0x0F, (0x0F<<20) | 0xF01A0); //Resotre Initial Setting
- ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( (0x0F<<20) | 0xF01A0, 20);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
-// //Force TXI(Q)P(N) to normal control
- Wb35Reg_WriteSync( pHwData, 0x105c, pHwData->reg.BB5C );
- pHwData->reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START);
- Wb35Reg_WriteSync( pHwData, 0x1050, pHwData->reg.BB50);
- break;
-
- case RF_AIROHA_7230:
-
- //RF parameters have filled completely, PLL_ON should be
- //pulled high
- Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON high\n");
- #endif
-
- //2.4GHz
- //ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
- //Wb35Reg_WriteSync pHwData, 0x0864, ltmp );
- //msleep(1); // Sleep 1 ms
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
-
- //5GHz
- Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000000 );
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON low\n");
- #endif
-
- number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
- Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
- // Write to register. number must less and equal than 16
- for( i=0; i<number; i++ )
- Wb35Reg_WriteSync( pHwData, 0x0864, pltmp[i] );
- msleep(5);
-
- Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
- #ifdef _PE_STATE_DUMP_
- printk("* PLL_ON high\n");
- #endif
-
- //ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
- //Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5);
-
- //Wb35Reg_WriteSync( pHwData, 0x03dc, 0x00000080 );
- //printk("* PLL_ON high\n");
- break;
-
- case RF_WB_242:
- case RF_WB_242_1: // 20060619.5 Add
-
- //
- // ; Version 1.3B revision items: for FA5976A , October 3, 2005 by HTHo
- //
- ltmp = pHwData->reg.BB5C & 0xfffff000;
- Wb35Reg_WriteSync( pHwData, 0x105c, ltmp );
- Wb35Reg_WriteSync( pHwData, 0x1058, 0 );
- pHwData->reg.BB50 |= 0x3;//(MASK_IQCAL_MODE|MASK_CALIB_START);//20060630
- Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
-
- //----- Calibration (1). VCO frequency calibration
- //Calibration (1a.0). Synthesizer reset (HTHo corrected 2005/05/10)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00101E, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5); // Sleep 5ms
- //Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFE69c0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
-
- //----- Calibration (2). TX baseband Gm-C filter auto-tuning
- //Calibration (2a). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF8EBC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (2b.0). TX filter auto-tuning BW: TFLBW=101 (TC5376A default)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x07<<24) | 0x0C68CE, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (2b). send TX reset signal (HTHo corrected May 10, 2005)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00201E, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (2c). turn-on TX Gm-C filter auto-tuning
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFCEBC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- udelay(150); // Sleep 150 us
- //turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF8EBC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //----- Calibration (3). RX baseband Gm-C filter auto-tuning
- //Calibration (3a). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default; July 26, 2005)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x07<<24) | 0x0C68CE, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (3b). send RX reset signal (HTHo corrected May 10, 2005)
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x0F<<24) | 0x00401E, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (3c). turn-on RX Gm-C filter auto-tuning
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFEEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- udelay(150); // Sleep 150 us
- //Calibration (3e). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //----- Calibration (4). TX LO leakage calibration
- //Calibration (4a). TX LO leakage calibration
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFD6BC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- udelay(150); // Sleep 150 us
-
- //----- Calibration (5). RX DC offset calibration
- //Calibration (5a). turn off ENCAL signal and set to RX SW DC caliration mode
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5b). turn off AGC servo-loop & RSSI
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x01<<24) | 0xEBFFC2, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; for LNA=11 --------
- //Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x343FCC, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
- //Calibration (5f). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; for LNA=10 --------
- //Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x342FCC, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
- //Calibration (5f). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; for LNA=01 --------
- //Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x341FCC, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
- //Calibration (5f). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; for LNA=00 --------
- //Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x06<<24) | 0x340FCC, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFF6DC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(2); // Sleep 2ms
- //Calibration (5f). turn off ENCAL signal
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xFAEDC0, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- //Calibration (5g). turn on AGC servo-loop
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x01<<24) | 0xEFFFC2, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
-
- //; ----- Calibration (7). Switch RF chip to normal mode
- //0x00 0xF86100 ; 3E184 ; Switch RF chip to normal mode
-// msleep(10); // @@ 20060721
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( (0x00<<24) | 0xF86100, 24);
- Wb35Reg_WriteSync( pHwData, 0x0864, ltmp );
- msleep(5); // Sleep 5 ms
-
-// //write back
-// Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C);
-// pHwData->reg.BB50 &= ~0x13;//(MASK_IQCAL_MODE|MASK_CALIB_START); // 20060315.1 fix
-// Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
-// msleep(1); // Sleep 1 ms
- break;
+ switch (pHwData->phy_type) {
+ case RF_AIROHA_2230:
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x07 << 20) | 0xE168E, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(10);
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_rf_data[7], 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(10);
+ case RF_AIROHA_2230S:
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
+ msleep(10);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xa0); /* PLL_PD REF_PD set to 0 */
+ msleep(10);
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xe0); /* MLK_EN */
+ Wb35Reg_WriteSync(pHwData, 0x03b0, 1); /* Reset hardware first */
+ msleep(10);
+ /* ========================================================= */
+
+ /* The follow code doesn't use the burst-write mode */
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F<<20) | 0xF01A0, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ ltmp = pHwData->reg.BB5C & 0xfffff000;
+ Wb35Reg_WriteSync(pHwData, 0x105c, ltmp);
+ pHwData->reg.BB50 |= 0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START) */
+ Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
+ msleep(5);
+
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01B0, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01E0, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+
+ ltmp = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse((0x0F << 20) | 0xF01A0, 20);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp) ;
+
+ Wb35Reg_WriteSync(pHwData, 0x105c, pHwData->reg.BB5C);
+ pHwData->reg.BB50 &= ~0x13; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */
+ Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
+ break;
+ case RF_AIROHA_7230:
+ /* RF parameters have filled completely, PLL_ON should be pulled high */
+ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
+ #ifdef _PE_STATE_DUMP_
+ printk("* PLL_ON high\n");
+ #endif
+
+ /* 2.4GHz */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x1ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+
+ /* 5GHz */
+ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000000);
+ #ifdef _PE_STATE_DUMP_
+ printk("* PLL_ON low\n");
+ #endif
+
+ number = sizeof(al7230_rf_data_50) / sizeof(al7230_rf_data_50[0]);
+ Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
+ /* Write to register. number must less and equal than 16 */
+ for (i = 0; i < number; i++)
+ Wb35Reg_WriteSync(pHwData, 0x0864, pltmp[i]);
+ msleep(5);
+
+ Wb35Reg_WriteSync(pHwData, 0x03dc, 0x00000080);
+ #ifdef _PE_STATE_DUMP_
+ printk("* PLL_ON high\n");
+ #endif
+
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x9ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x3ABA8F;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x12BACF;
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ break;
+ case RF_WB_242:
+ case RF_WB_242_1:
+ /* for FA5976A */
+ ltmp = pHwData->reg.BB5C & 0xfffff000;
+ Wb35Reg_WriteSync(pHwData, 0x105c, ltmp);
+ Wb35Reg_WriteSync(pHwData, 0x1058, 0);
+ pHwData->reg.BB50 |= 0x3; /* (MASK_IQCAL_MODE|MASK_CALIB_START); */
+ Wb35Reg_WriteSync(pHwData, 0x1050, pHwData->reg.BB50);
+
+ /* ----- Calibration (1). VCO frequency calibration */
+ /* Calibration (1a.0). Synthesizer reset */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00101E, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ /* Calibration (1a). VCO frequency calibration mode ; waiting 2msec VCO calibration time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFE69c0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+
+ /* ----- Calibration (2). TX baseband Gm-C filter auto-tuning */
+ /* Calibration (2a). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (2b.0). TX filter auto-tuning BW: TFLBW=101 (TC5376A default) */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (2b). send TX reset signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00201E, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (2c). turn-on TX Gm-C filter auto-tuning */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFCEBC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ udelay(150); /* Sleep 150 us */
+ /* turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF8EBC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* ----- Calibration (3). RX baseband Gm-C filter auto-tuning */
+ /* Calibration (3a). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (3b.0). RX filter auto-tuning BW: RFLBW=100 (TC5376A+corner default;) */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x07<<24) | 0x0C68CE, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (3b). send RX reset signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x0F<<24) | 0x00401E, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (3c). turn-on RX Gm-C filter auto-tuning */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFEEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ udelay(150); /* Sleep 150 us */
+ /* Calibration (3e). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* ----- Calibration (4). TX LO leakage calibration */
+ /* Calibration (4a). TX LO leakage calibration */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFD6BC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ udelay(150); /* Sleep 150 us */
+
+ /* ----- Calibration (5). RX DC offset calibration */
+ /* Calibration (5a). turn off ENCAL signal and set to RX SW DC calibration mode */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5b). turn off AGC servo-loop & RSSI */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEBFFC2, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* for LNA=11 -------- */
+ /* Calibration (5c-h). RX DC offset current bias ON; & LNA=11; RXVGA=111111 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x343FCC, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+ /* Calibration (5f). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* for LNA=10 -------- */
+ /* Calibration (5c-m). RX DC offset current bias ON; & LNA=10; RXVGA=111111 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x342FCC, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+ /* Calibration (5f). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* for LNA=01 -------- */
+ /* Calibration (5c-m). RX DC offset current bias ON; & LNA=01; RXVGA=111111 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x341FCC, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+ /* Calibration (5f). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* for LNA=00 -------- */
+ /* Calibration (5c-l). RX DC offset current bias ON; & LNA=00; RXVGA=111111 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x06<<24) | 0x340FCC, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5d). turn on RX DC offset cal function; and waiting 2 msec cal time */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFF6DC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(2);
+ /* Calibration (5f). turn off ENCAL signal */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xFAEDC0, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ /* Calibration (5g). turn on AGC servo-loop */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x01<<24) | 0xEFFFC2, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+
+ /* ----- Calibration (7). Switch RF chip to normal mode */
+ /* 0x00 0xF86100 ; 3E184 ; Switch RF chip to normal mode */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse((0x00<<24) | 0xF86100, 24);
+ Wb35Reg_WriteSync(pHwData, 0x0864, ltmp);
+ msleep(5);
+ break;
}
}
-void BBProcessor_AL7230_2400( struct hw_data * pHwData)
+void BBProcessor_AL7230_2400(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
u32 pltmp[12];
- pltmp[0] = 0x16A8337A; // 0x16a5215f; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9AFF9AA6; // 0x9aff9ca6; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55D00A04; // 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xFFF72031; // 0xFfFf2138; // 0x100c AGC_Ctrl4
+ pltmp[0] = 0x16A8337A; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9AFF9AA6; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xFFF72031; /* 0x100c AGC_Ctrl4 */
reg->BB0C = 0xFFF72031;
- pltmp[4] = 0x0FacDCC5; // 0x1010 AGC_Ctrl5 // 20050927 0x0FacDCB7
- pltmp[5] = 0x00CAA333; // 0x00eaa333; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xF2211111; // 0x11111111; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x06443440; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0xA8002A79; // 0xa9002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 20050927 0x40000228
- pltmp[11] = 0x232D7F30; // 0x23457f30;// 0x102c A_ACQ_Ctrl
+ pltmp[4] = 0x0FacDCC5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00CAA333; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xF2211111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x06443440; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0xA8002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528;
+ pltmp[11] = 0x232D7F30; /* 0x102c A_ACQ_Ctrl */
reg->BB2C = 0x232D7F30;
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
- pltmp[0] = 0x00002c54; // 0x1030 B_ACQ_Ctrl
+ pltmp[0] = 0x00002c54; /* 0x1030 B_ACQ_Ctrl */
reg->BB30 = 0x00002c54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00332C1B; // 0x00453B24; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0A00FEFF; // 0x0E00FEFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x2B106208; // 0x1050 MODE_Ctrl
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x00332C1B; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0A00FEFF; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x2B106208; /* 0x1050 MODE_Ctrl */
reg->BB50 = 0x2B106208;
- pltmp[9] = 0; // 0x1054
+ pltmp[9] = 0; /* 0x1054 */
reg->BB54 = 0x00000000;
- pltmp[10] = 0x52524242; // 0x64645252; // 0x1058 IQ_Alpha
+ pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
reg->BB58 = 0x52524242;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
}
-void BBProcessor_AL7230_5000( struct hw_data * pHwData)
+void BBProcessor_AL7230_5000(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
u32 pltmp[12];
- pltmp[0] = 0x16AA6678; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9AFFA0B2; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xEFFF233E; // 0x100c AGC_Ctrl4
+ pltmp[0] = 0x16AA6678; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9AFFA0B2; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xEFFF233E; /* 0x100c AGC_Ctrl4 */
reg->BB0C = 0xEFFF233E;
- pltmp[4] = 0x0FacDCC5; // 0x1010 AGC_Ctrl5 // 20050927 0x0FacDCB7
- pltmp[5] = 0x00CAA333; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xF2432111; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x05C43440; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 20050927 0x40000228
- pltmp[11] = 0x232FDF30;// 0x102c A_ACQ_Ctrl
+ pltmp[4] = 0x0FacDCC5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00CAA333; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xF2432111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x05C43440; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528;
+ pltmp[11] = 0x232FDF30;/* 0x102c A_ACQ_Ctrl */
reg->BB2C = 0x232FDF30;
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
- pltmp[0] = 0x80002C7C; // 0x1030 B_ACQ_Ctrl
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
+ pltmp[0] = 0x80002C7C; /* 0x1030 B_ACQ_Ctrl */
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00332C1B; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0A00FEFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x2B107208; // 0x1050 MODE_Ctrl
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x00332C1B; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0A00FEFF; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x2B107208; /* 0x1050 MODE_Ctrl */
reg->BB50 = 0x2B107208;
- pltmp[9] = 0; // 0x1054
+ pltmp[9] = 0; /* 0x1054 */
reg->BB54 = 0x00000000;
- pltmp[10] = 0x52524242; // 0x1058 IQ_Alpha
+ pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
reg->BB58 = 0x52524242;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
}
-//=============================================================================================================
-// BBProcessorPowerupInit --
-//
-// Description:
-// Initialize the Baseband processor.
-//
-// Arguments:
-// pHwData - Handle of the USB Device.
-//
-// Return values:
-// None.
-//=============================================================================================================
-void
-BBProcessor_initial( struct hw_data * pHwData )
+/*
+ * ===========================================================================
+ * BBProcessorPowerupInit --
+ *
+ * Description:
+ * Initialize the Baseband processor.
+ *
+ * Arguments:
+ * pHwData - Handle of the USB Device.
+ *
+ * Return values:
+ * None.
+ *============================================================================
+ */
+void BBProcessor_initial(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
u32 i, pltmp[12];
- switch( pHwData->phy_type )
- {
- case RF_MAXIM_V1: // Initializng the Winbond 2nd BB(with Phy board (v1) + Maxim 331)
-
- pltmp[0] = 0x16F47E77; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9AFFAEA4; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xEFFF1A34; // 0x100c AGC_Ctrl4
- reg->BB0C = 0xEFFF1A34;
- pltmp[4] = 0x0FABE0B7; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x00CAA332; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xF6632111; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = (pHwData->phy_type==3) ? 0x40000a28 : 0x40000228; // 0x1028 MAXIM_331(b31=0) + WBRF_V1(b11=1) : MAXIM_331(b31=0) + WBRF_V2(b11=0)
- pltmp[11] = 0x232FDF30; // 0x102c A_ACQ_Ctrl
- reg->BB2C = 0x232FDF30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B6C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0E00FEFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106208;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x64646464; // 0x1058 IQ_Alpha
- reg->BB58 = 0x64646464;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
-
- //------------------------------------------------------------------
- //[20040722 WK]
- //Only for baseband version 2
-// case RF_MAXIM_317:
- case RF_MAXIM_2825:
- case RF_MAXIM_2827:
- case RF_MAXIM_2828:
-
- pltmp[0] = 0x16b47e77; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9affaea4; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xefff1a34; // 0x100c AGC_Ctrl4
- reg->BB0C = 0xefff1a34;
- pltmp[4] = 0x0fabe0b7; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x00caa332; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xf6632111; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 0x40000128; Modify for 33's 1.0.95
- pltmp[11] = 0x232fdf30; // 0x102c A_ACQ_Ctrl
- reg->BB2C = 0x232fdf30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B6C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0D00FDFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106208;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x64646464; // 0x1058 IQ_Alpha
- reg->BB58 = 0x64646464;
- pltmp[11] = 0xAA28C000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
-
- case RF_MAXIM_2829:
-
- pltmp[0] = 0x16b47e77; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9affaea4; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xf4ff1632; // 0xefff1a34; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95
- reg->BB0C = 0xf4ff1632; // 0xefff1a34; Modify for 33's 1.0.95
- pltmp[4] = 0x0fabe0b7; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x00caa332; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xf8632112; // 0xf6632111; // 0x1018 AGC_Ctrl7 Modify for 33's 1.0.95
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04CC3640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 0x40000128; modify for 33's 1.0.95
- pltmp[11] = 0x232fdf30; // 0x102c A_ACQ_Ctrl
- reg->BB2C = 0x232fdf30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5b2c8769; // 0x5B6C8769; // 0x1038 B_TXRX_Ctrl Modify for 33's 1.0.95
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x002c2617; // 0x00453B24; // 0x1048 11b TX RC filter Modify for 33's 1.0.95
- pltmp[7] = 0x0800feff; // 0x0D00FDFF; // 0x104c 11b TX RC filter Modify for 33's 1.0.95
- pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106208;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x64644a4a; // 0x64646464; // 0x1058 IQ_Alpha Modify for 33's 1.0.95
- reg->BB58 = 0x64646464;
- pltmp[11] = 0xAA28C000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
-
- case RF_AIROHA_2230:
-
- pltmp[0] = 0X16764A77; // 0x1000 AGC_Ctrl1 //0x16765A77
- pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xFFFd203c; // 0xFFFb203a; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95.xxx version
- reg->BB0C = 0xFFFd203c;
- pltmp[4] = 0X0FBFDCc5; // 0X0FBFDCA0; // 0x1010 AGC_Ctrl5 //0x0FB2E0B7 Modify for 33's 1.0.95.xxx version
- pltmp[5] = 0x00caa332; // 0x00caa333; // 0x1014 AGC_Ctrl6 Modify for 33's 1.0.95.xxx version
- pltmp[6] = 0XF6632111; // 0XF1632112; // 0x1018 AGC_Ctrl7 //0xf6632112 Modify for 33's 1.0.95.xxx version
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0X40000528; //0x40000228
- pltmp[11] = 0x232dfF30; // 0x232A9F30; // 0x102c A_ACQ_Ctrl //0x232a9730
- reg->BB2C = 0x232dfF30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl //0x5B6C8769
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = BB48_DEFAULT_AL2230_11G; // 0x1048 11b TX RC filter 20060613.2
- reg->BB48 = BB48_DEFAULT_AL2230_11G; // 20051221 ch14 20060613.2
- pltmp[7] = BB4C_DEFAULT_AL2230_11G; // 0x104c 11b TX RC filter 20060613.2
- reg->BB4C = BB4C_DEFAULT_AL2230_11G; // 20060613.1 20060613.2
- pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106200;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x52524242; // 0x1058 IQ_Alpha
- reg->BB58 = 0x52524242;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
+ switch (pHwData->phy_type) {
+ case RF_MAXIM_V1: /* Initializng the Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
+ pltmp[0] = 0x16F47E77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9AFFAEA4; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xEFFF1A34; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xEFFF1A34;
+ pltmp[4] = 0x0FABE0B7; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00CAA332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xF6632111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = (pHwData->phy_type == 3) ? 0x40000a28 : 0x40000228; /* 0x1028 MAXIM_331(b31=0) + WBRF_V1(b11=1) : MAXIM_331(b31=0) + WBRF_V2(b11=0) */
+ pltmp[11] = 0x232FDF30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232FDF30; /* Modify for 33's 1.0.95.xxx version, antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B6C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x00453B24; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0E00FEFF; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106208;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x64646464; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x64646464;
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
- case RF_AIROHA_2230S: // 20060420 Add this
-
- pltmp[0] = 0X16764A77; // 0x1000 AGC_Ctrl1 //0x16765A77
- pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xFFFd203c; // 0xFFFb203a; // 0x100c AGC_Ctrl4 Modify for 33's 1.0.95.xxx version
- reg->BB0C = 0xFFFd203c;
- pltmp[4] = 0X0FBFDCc5; // 0X0FBFDCA0; // 0x1010 AGC_Ctrl5 //0x0FB2E0B7 Modify for 33's 1.0.95.xxx version
- pltmp[5] = 0x00caa332; // 0x00caa333; // 0x1014 AGC_Ctrl6 Modify for 33's 1.0.95.xxx version
- pltmp[6] = 0XF6632111; // 0XF1632112; // 0x1018 AGC_Ctrl7 //0xf6632112 Modify for 33's 1.0.95.xxx version
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0X40000528; //0x40000228
- pltmp[11] = 0x232dfF30; // 0x232A9F30; // 0x102c A_ACQ_Ctrl //0x232a9730
- reg->BB2C = 0x232dfF30; //Modify for 33's 1.0.95.xxx version, antenna 1
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl //0x5B6C8769
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3C = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = BB48_DEFAULT_AL2230_11G; // 0x1048 11b TX RC filter 20060613.2
- reg->BB48 = BB48_DEFAULT_AL2230_11G; // 20051221 ch14 20060613.2
- pltmp[7] = BB4C_DEFAULT_AL2230_11G; // 0x104c 11b TX RC filter 20060613.2
- reg->BB4C = BB4C_DEFAULT_AL2230_11G; // 20060613.1
- pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106200;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x52523232; // 20060419 0x52524242; // 0x1058 IQ_Alpha
- reg->BB58 = 0x52523232; // 20060419 0x52524242;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
+ case RF_MAXIM_2825:
+ case RF_MAXIM_2827:
+ case RF_MAXIM_2828:
+ pltmp[0] = 0x16b47e77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9affaea4; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xefff1a34; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xefff1a34;
+ pltmp[4] = 0x0fabe0b7; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xf6632111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528;
+ pltmp[11] = 0x232fdf30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232fdf30; /* antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B6C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x00453B24; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0D00FDFF; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106208;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x64646464; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x64646464;
+ pltmp[11] = 0xAA28C000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
- case RF_AIROHA_7230:
-/*
- pltmp[0] = 0x16a84a77; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9affafb2; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55d00a04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xFFFb203a; // 0x100c AGC_Ctrl4
- reg->BB0c = 0xFFFb203a;
- pltmp[4] = 0x0FBFDCB7; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x00caa333; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0xf6632112; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04C43640; // 0x1020 AGC_Ctrl9
- pltmp[9] = 0x00002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000228;
- pltmp[11] = 0x232A9F30;// 0x102c A_ACQ_Ctrl
- reg->BB2c = 0x232A9F30;
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = 0x00000000; // 0x103c 11a TX LS filter
- reg->BB3c = 0x00000000;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = 0x00453B24; // 0x1048 11b TX RC filter
- pltmp[7] = 0x0E00FEFF; // 0x104c 11b TX RC filter
- pltmp[8] = 0x27106200; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106200;
- pltmp[9] = 0; // 0x1054
- reg->BB54 = 0x00000000;
- pltmp[10] = 0x64645252; // 0x1058 IQ_Alpha
- reg->BB58 = 0x64645252;
- pltmp[11] = 0xAA0AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-*/
- BBProcessor_AL7230_2400( pHwData );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
+ case RF_MAXIM_2829:
+ pltmp[0] = 0x16b47e77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9affaea4; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xf4ff1632; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xf4ff1632;
+ pltmp[4] = 0x0fabe0b7; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0xf8632112; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04CC3640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528;
+ pltmp[11] = 0x232fdf30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232fdf30; /* antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5b2c8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = 0x002c2617; /* 0x1048 11b TX RC filter */
+ pltmp[7] = 0x0800feff; /* 0x104c 11b TX RC filter */
+ pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106208;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x64644a4a; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x64646464;
+ pltmp[11] = 0xAA28C000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ case RF_AIROHA_2230:
+ pltmp[0] = 0X16764A77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9affafb2; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xFFFd203c; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xFFFd203c;
+ pltmp[4] = 0X0FBFDCc5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0XF6632111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04C43640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0X40000528;
+ pltmp[11] = 0x232dfF30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232dfF30; /* antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = BB48_DEFAULT_AL2230_11G; /* 0x1048 11b TX RC filter */
+ reg->BB48 = BB48_DEFAULT_AL2230_11G; /* 20051221 ch14 */
+ pltmp[7] = BB4C_DEFAULT_AL2230_11G; /* 0x104c 11b TX RC filter */
+ reg->BB4C = BB4C_DEFAULT_AL2230_11G;
+ pltmp[8] = 0x27106200; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106200;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x52524242; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x52524242;
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ case RF_AIROHA_2230S:
+ pltmp[0] = 0X16764A77; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9affafb2; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55d00a04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xFFFd203c; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xFFFd203c;
+ pltmp[4] = 0X0FBFDCc5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x00caa332; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0XF6632111; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04C43640; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0x00002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0X40000528;
+ pltmp[11] = 0x232dfF30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x232dfF30; /* antenna 1 */
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = 0x00000000; /* 0x103c 11a TX LS filter */
+ reg->BB3C = 0x00000000;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = BB48_DEFAULT_AL2230_11G; /* 0x1048 11b TX RC filter */
+ reg->BB48 = BB48_DEFAULT_AL2230_11G; /* ch14 */
+ pltmp[7] = BB4C_DEFAULT_AL2230_11G; /* 0x104c 11b TX RC filter */
+ reg->BB4C = BB4C_DEFAULT_AL2230_11G;
+ pltmp[8] = 0x27106200; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106200;
+ pltmp[9] = 0; /* 0x1054 */
+ reg->BB54 = 0x00000000;
+ pltmp[10] = 0x52523232; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x52523232;
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ case RF_AIROHA_7230:
+ BBProcessor_AL7230_2400(pHwData);
- case RF_WB_242:
- case RF_WB_242_1: // 20060619.5 Add
-
- pltmp[0] = 0x16A8525D; // 0x1000 AGC_Ctrl1
- pltmp[1] = 0x9AFF9ABA; // 0x1004 AGC_Ctrl2
- pltmp[2] = 0x55D00A04; // 0x1008 AGC_Ctrl3
- pltmp[3] = 0xEEE91C32; // 0x100c AGC_Ctrl4
- reg->BB0C = 0xEEE91C32;
- pltmp[4] = 0x0FACDCC5; // 0x1010 AGC_Ctrl5
- pltmp[5] = 0x000AA344; // 0x1014 AGC_Ctrl6
- pltmp[6] = 0x22222221; // 0x1018 AGC_Ctrl7
- pltmp[7] = 0x0FA3F0ED; // 0x101c AGC_Ctrl8
- pltmp[8] = 0x04CC3440; // 20051018 0x03CB3440; // 0x1020 AGC_Ctrl9 20051014 0x03C33440
- pltmp[9] = 0xA9002A79; // 0x1024 AGC_Ctrl10
- pltmp[10] = 0x40000528; // 0x1028
- pltmp[11] = 0x23457F30; // 0x102c A_ACQ_Ctrl
- reg->BB2C = 0x23457F30;
- Wb35Reg_BurstWrite( pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT );
-
- pltmp[0] = 0x00002C54; // 0x1030 B_ACQ_Ctrl
- reg->BB30 = 0x00002C54;
- pltmp[1] = 0x00C0D6C5; // 0x1034 A_TXRX_Ctrl
- pltmp[2] = 0x5B2C8769; // 0x1038 B_TXRX_Ctrl
- pltmp[3] = pHwData->BB3c_cal; // 0x103c 11a TX LS filter
- reg->BB3C = pHwData->BB3c_cal;
- pltmp[4] = 0x00003F29; // 0x1040 11a TX LS filter
- pltmp[5] = 0x0EFEFBFE; // 0x1044 11a TX LS filter
- pltmp[6] = BB48_DEFAULT_WB242_11G; // 0x1048 11b TX RC filter 20060613.2
- reg->BB48 = BB48_DEFAULT_WB242_11G; // 20060613.1 20060613.2
- pltmp[7] = BB4C_DEFAULT_WB242_11G; // 0x104c 11b TX RC filter 20060613.2
- reg->BB4C = BB4C_DEFAULT_WB242_11G; // 20060613.1 20060613.2
- pltmp[8] = 0x27106208; // 0x1050 MODE_Ctrl
- reg->BB50 = 0x27106208;
- pltmp[9] = pHwData->BB54_cal; // 0x1054
- reg->BB54 = pHwData->BB54_cal;
- pltmp[10] = 0x52523131; // 0x1058 IQ_Alpha
- reg->BB58 = 0x52523131;
- pltmp[11] = 0xAA0AC000; // 20060825 0xAA2AC000; // 0x105c DC_Cancel
- Wb35Reg_BurstWrite( pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT );
-
- Wb35Reg_Write( pHwData, 0x1070, 0x00000045 );
- break;
- }
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ case RF_WB_242:
+ case RF_WB_242_1:
+ pltmp[0] = 0x16A8525D; /* 0x1000 AGC_Ctrl1 */
+ pltmp[1] = 0x9AFF9ABA; /* 0x1004 AGC_Ctrl2 */
+ pltmp[2] = 0x55D00A04; /* 0x1008 AGC_Ctrl3 */
+ pltmp[3] = 0xEEE91C32; /* 0x100c AGC_Ctrl4 */
+ reg->BB0C = 0xEEE91C32;
+ pltmp[4] = 0x0FACDCC5; /* 0x1010 AGC_Ctrl5 */
+ pltmp[5] = 0x000AA344; /* 0x1014 AGC_Ctrl6 */
+ pltmp[6] = 0x22222221; /* 0x1018 AGC_Ctrl7 */
+ pltmp[7] = 0x0FA3F0ED; /* 0x101c AGC_Ctrl8 */
+ pltmp[8] = 0x04CC3440; /* 0x1020 AGC_Ctrl9 */
+ pltmp[9] = 0xA9002A79; /* 0x1024 AGC_Ctrl10 */
+ pltmp[10] = 0x40000528; /* 0x1028 */
+ pltmp[11] = 0x23457F30; /* 0x102c A_ACQ_Ctrl */
+ reg->BB2C = 0x23457F30;
+ Wb35Reg_BurstWrite(pHwData, 0x1000, pltmp, 12, AUTO_INCREMENT);
+
+ pltmp[0] = 0x00002C54; /* 0x1030 B_ACQ_Ctrl */
+ reg->BB30 = 0x00002C54;
+ pltmp[1] = 0x00C0D6C5; /* 0x1034 A_TXRX_Ctrl */
+ pltmp[2] = 0x5B2C8769; /* 0x1038 B_TXRX_Ctrl */
+ pltmp[3] = pHwData->BB3c_cal; /* 0x103c 11a TX LS filter */
+ reg->BB3C = pHwData->BB3c_cal;
+ pltmp[4] = 0x00003F29; /* 0x1040 11a TX LS filter */
+ pltmp[5] = 0x0EFEFBFE; /* 0x1044 11a TX LS filter */
+ pltmp[6] = BB48_DEFAULT_WB242_11G; /* 0x1048 11b TX RC filter */
+ reg->BB48 = BB48_DEFAULT_WB242_11G;
+ pltmp[7] = BB4C_DEFAULT_WB242_11G; /* 0x104c 11b TX RC filter */
+ reg->BB4C = BB4C_DEFAULT_WB242_11G;
+ pltmp[8] = 0x27106208; /* 0x1050 MODE_Ctrl */
+ reg->BB50 = 0x27106208;
+ pltmp[9] = pHwData->BB54_cal; /* 0x1054 */
+ reg->BB54 = pHwData->BB54_cal;
+ pltmp[10] = 0x52523131; /* 0x1058 IQ_Alpha */
+ reg->BB58 = 0x52523131;
+ pltmp[11] = 0xAA0AC000; /* 0x105c DC_Cancel */
+ Wb35Reg_BurstWrite(pHwData, 0x1030, pltmp, 12, AUTO_INCREMENT);
+
+ Wb35Reg_Write(pHwData, 0x1070, 0x00000045);
+ break;
+ }
- // Fill the LNA table
- reg->LNAValue[0] = (u8)(reg->BB0C & 0xff);
+ /* Fill the LNA table */
+ reg->LNAValue[0] = (u8) (reg->BB0C & 0xff);
reg->LNAValue[1] = 0;
- reg->LNAValue[2] = (u8)((reg->BB0C & 0xff00)>>8);
+ reg->LNAValue[2] = (u8) ((reg->BB0C & 0xff00) >> 8);
reg->LNAValue[3] = 0;
- // Fill SQ3 table
- for( i=0; i<MAX_SQ3_FILTER_SIZE; i++ )
- reg->SQ3_filter[i] = 0x2f; // half of Bit 0 ~ 6
+ /* Fill SQ3 table */
+ for (i = 0; i < MAX_SQ3_FILTER_SIZE; i++)
+ reg->SQ3_filter[i] = 0x2f; /* half of Bit 0 ~ 6 */
}
-void set_tx_power_per_channel_max2829( struct hw_data * pHwData, struct chan_info Channel)
+void set_tx_power_per_channel_max2829(struct hw_data *pHwData, struct chan_info Channel)
{
- RFSynthesizer_SetPowerIndex( pHwData, 100 ); // 20060620.1 Modify
+ RFSynthesizer_SetPowerIndex(pHwData, 100);
}
-void set_tx_power_per_channel_al2230( struct hw_data * pHwData, struct chan_info Channel )
+void set_tx_power_per_channel_al2230(struct hw_data *pHwData, struct chan_info Channel)
{
u8 index = 100;
- if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff) // 20060620.1 Add
+ if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
- RFSynthesizer_SetPowerIndex( pHwData, index );
+ RFSynthesizer_SetPowerIndex(pHwData, index);
}
-void set_tx_power_per_channel_al7230( struct hw_data * pHwData, struct chan_info Channel)
+void set_tx_power_per_channel_al7230(struct hw_data *pHwData, struct chan_info Channel)
{
u8 i, index = 100;
- switch ( Channel.band )
- {
- case BAND_TYPE_DSSS:
- case BAND_TYPE_OFDM_24:
- {
- if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
- index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
- }
- break;
- case BAND_TYPE_OFDM_5:
- {
- for (i =0; i<35; i++)
- {
- if (Channel.ChanNo == pHwData->TxVgaFor50[i].ChanNo)
- {
- if (pHwData->TxVgaFor50[i].TxVgaValue != 0xff)
- index = pHwData->TxVgaFor50[i].TxVgaValue;
- break;
- }
- }
+ switch (Channel.band) {
+ case BAND_TYPE_DSSS:
+ case BAND_TYPE_OFDM_24:
+ if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
+ index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
+ break;
+ case BAND_TYPE_OFDM_5:
+ for (i = 0; i < 35; i++) {
+ if (Channel.ChanNo == pHwData->TxVgaFor50[i].ChanNo) {
+ if (pHwData->TxVgaFor50[i].TxVgaValue != 0xff)
+ index = pHwData->TxVgaFor50[i].TxVgaValue;
+ break;
}
- break;
+ }
+ break;
}
- RFSynthesizer_SetPowerIndex( pHwData, index );
+ RFSynthesizer_SetPowerIndex(pHwData, index);
}
-void set_tx_power_per_channel_wb242( struct hw_data * pHwData, struct chan_info Channel)
+void set_tx_power_per_channel_wb242(struct hw_data *pHwData, struct chan_info Channel)
{
u8 index = 100;
- switch ( Channel.band )
- {
- case BAND_TYPE_DSSS:
- case BAND_TYPE_OFDM_24:
- {
- if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
- index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
- }
- break;
- case BAND_TYPE_OFDM_5:
- break;
+ switch (Channel.band) {
+ case BAND_TYPE_DSSS:
+ case BAND_TYPE_OFDM_24:
+ if (pHwData->TxVgaFor24[Channel.ChanNo - 1] != 0xff)
+ index = pHwData->TxVgaFor24[Channel.ChanNo - 1];
+ break;
+ case BAND_TYPE_OFDM_5:
+ break;
}
- RFSynthesizer_SetPowerIndex( pHwData, index );
+ RFSynthesizer_SetPowerIndex(pHwData, index);
}
-//=============================================================================================================
-// RFSynthesizer_SwitchingChannel --
-//
-// Description:
-// Swithch the RF channel.
-//
-// Arguments:
-// pHwData - Handle of the USB Device.
-// Channel - The channel no.
-//
-// Return values:
-// None.
-//=============================================================================================================
-void
-RFSynthesizer_SwitchingChannel( struct hw_data * pHwData, struct chan_info Channel )
+/*
+ * ==========================================================================
+ * RFSynthesizer_SwitchingChannel --
+ *
+ * Description:
+ * Swithch the RF channel.
+ *
+ * Arguments:
+ * pHwData - Handle of the USB Device.
+ * Channel - The channel no.
+ *
+ * Return values:
+ * None.
+ * ===========================================================================
+ */
+void RFSynthesizer_SwitchingChannel(struct hw_data *pHwData, struct chan_info Channel)
{
struct wb35_reg *reg = &pHwData->reg;
- u32 pltmp[16]; // The 16 is the maximum capability of hardware
+ u32 pltmp[16]; /* The 16 is the maximum capability of hardware */
u32 count, ltmp;
u8 i, j, number;
u8 ChnlTmp;
- switch( pHwData->phy_type )
- {
- case RF_MAXIM_2825:
- case RF_MAXIM_V1: // 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331)
-
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
- {
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_channel_data_24[Channel.ChanNo-1][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- RFSynthesizer_SetPowerIndex( pHwData, 100 );
- break;
-
- case RF_MAXIM_2827:
-
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
- {
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_channel_data_24[Channel.ChanNo-1][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- else if( Channel.band == BAND_TYPE_OFDM_5 ) // channel 36 ~ 64
- {
- ChnlTmp = (Channel.ChanNo - 36) / 4;
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_channel_data_50[ChnlTmp][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- RFSynthesizer_SetPowerIndex( pHwData, 100 );
- break;
-
- case RF_MAXIM_2828:
-
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 13
- {
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_channel_data_24[Channel.ChanNo-1][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- else if( Channel.band == BAND_TYPE_OFDM_5 ) // channel 36 ~ 64
- {
- ChnlTmp = (Channel.ChanNo - 36) / 4;
- for ( i = 0; i < 3; i++)
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_channel_data_50[ChnlTmp][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- RFSynthesizer_SetPowerIndex( pHwData, 100 );
- break;
-
- case RF_MAXIM_2829:
+ switch (pHwData->phy_type) {
+ case RF_MAXIM_2825:
+ case RF_MAXIM_V1: /* 11g Winbond 2nd BB(with Phy board (v1) + Maxim 331) */
- if( Channel.band <= BAND_TYPE_OFDM_24)
- {
- for( i=0; i<3; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_channel_data_24[Channel.ChanNo-1][i], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
- else if( Channel.band == BAND_TYPE_OFDM_5 )
- {
- count = sizeof(max2829_channel_data_50) / sizeof(max2829_channel_data_50[0]);
-
- for( i=0; i<count; i++ )
- {
- if( max2829_channel_data_50[i][0] == Channel.ChanNo )
- {
- for( j=0; j<3; j++ )
- pltmp[j] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2829_channel_data_50[i][j+1], 18);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
-
- if( (max2829_channel_data_50[i][3] & 0x3FFFF) == 0x2A946 )
- {
- ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( (5<<18)|0x2A906, 18);
- Wb35Reg_Write( pHwData, 0x0864, ltmp );
- }
- else // 0x2A9C6
- {
- ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( (5<<18)|0x2A986, 18);
- Wb35Reg_Write( pHwData, 0x0864, ltmp );
- }
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_channel_data_24[Channel.ChanNo-1][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ }
+ RFSynthesizer_SetPowerIndex(pHwData, 100);
+ break;
+ case RF_MAXIM_2827:
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_channel_data_24[Channel.ChanNo-1][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) { /* channel 36 ~ 64 */
+ ChnlTmp = (Channel.ChanNo - 36) / 4;
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_channel_data_50[ChnlTmp][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ }
+ RFSynthesizer_SetPowerIndex(pHwData, 100);
+ break;
+ case RF_MAXIM_2828:
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 13 */
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_channel_data_24[Channel.ChanNo-1][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) { /* channel 36 ~ 64 */
+ ChnlTmp = (Channel.ChanNo - 36) / 4;
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_channel_data_50[ChnlTmp][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ }
+ RFSynthesizer_SetPowerIndex(pHwData, 100);
+ break;
+ case RF_MAXIM_2829:
+ if (Channel.band <= BAND_TYPE_OFDM_24) {
+ for (i = 0; i < 3; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_24[Channel.ChanNo-1][i], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) {
+ count = sizeof(max2829_channel_data_50) / sizeof(max2829_channel_data_50[0]);
+
+ for (i = 0; i < count; i++) {
+ if (max2829_channel_data_50[i][0] == Channel.ChanNo) {
+ for (j = 0; j < 3; j++)
+ pltmp[j] = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2829_channel_data_50[i][j+1], 18);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
+
+ if ((max2829_channel_data_50[i][3] & 0x3FFFF) == 0x2A946) {
+ ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse((5 << 18) | 0x2A906, 18);
+ Wb35Reg_Write(pHwData, 0x0864, ltmp);
+ } else { /* 0x2A9C6 */
+ ltmp = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse((5 << 18) | 0x2A986, 18);
+ Wb35Reg_Write(pHwData, 0x0864, ltmp);
}
}
}
- set_tx_power_per_channel_max2829( pHwData, Channel );
- break;
-
- case RF_AIROHA_2230:
- case RF_AIROHA_2230S: // 20060420 Add this
-
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
- {
- for( i=0; i<2; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_channel_data_24[Channel.ChanNo-1][i], 20);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 2, NO_INCREMENT );
+ }
+ set_tx_power_per_channel_max2829(pHwData, Channel);
+ break;
+ case RF_AIROHA_2230:
+ case RF_AIROHA_2230S:
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
+ for (i = 0; i < 2; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_channel_data_24[Channel.ChanNo-1][i], 20);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 2, NO_INCREMENT);
+ }
+ set_tx_power_per_channel_al2230(pHwData, Channel);
+ break;
+ case RF_AIROHA_7230:
+ /* Channel independent registers */
+ if (Channel.band != pHwData->band) {
+ if (Channel.band <= BAND_TYPE_OFDM_24) {
+ /* Update BB register */
+ BBProcessor_AL7230_2400(pHwData);
+
+ number = sizeof(al7230_rf_data_24) / sizeof(al7230_rf_data_24[0]);
+ Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
+ } else {
+ /* Update BB register */
+ BBProcessor_AL7230_5000(pHwData);
+
+ number = sizeof(al7230_rf_data_50) / sizeof(al7230_rf_data_50[0]);
+ Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
}
- set_tx_power_per_channel_al2230( pHwData, Channel );
- break;
- case RF_AIROHA_7230:
-
- //Start to fill RF parameters, PLL_ON should be pulled low.
- //Wb35Reg_Write( pHwData, 0x03dc, 0x00000000 );
- //printk("* PLL_ON low\n");
-
- //Channel independent registers
- if( Channel.band != pHwData->band)
- {
- if (Channel.band <= BAND_TYPE_OFDM_24)
- {
- //Update BB register
- BBProcessor_AL7230_2400(pHwData);
-
- number = sizeof(al7230_rf_data_24)/sizeof(al7230_rf_data_24[0]);
- Set_ChanIndep_RfData_al7230_24(pHwData, pltmp, number);
- }
- else
- {
- //Update BB register
- BBProcessor_AL7230_5000(pHwData);
-
- number = sizeof(al7230_rf_data_50)/sizeof(al7230_rf_data_50[0]);
- Set_ChanIndep_RfData_al7230_50(pHwData, pltmp, number);
- }
-
- // Write to register. number must less and equal than 16
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, number, NO_INCREMENT );
- #ifdef _PE_STATE_DUMP_
- printk("Band changed\n");
- #endif
- }
+ /* Write to register. number must less and equal than 16 */
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, number, NO_INCREMENT);
+ #ifdef _PE_STATE_DUMP_
+ printk("Band changed\n");
+ #endif
+ }
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
- {
- for( i=0; i<2; i++ )
- pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_24[Channel.ChanNo-1][i]&0xffffff);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 2, NO_INCREMENT );
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
+ for (i = 0; i < 2; i++)
+ pltmp[i] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_24[Channel.ChanNo-1][i]&0xffffff);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 2, NO_INCREMENT);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) {
+ /* Update Reg12 */
+ if ((Channel.ChanNo > 64) && (Channel.ChanNo <= 165)) {
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00143c;
+ Wb35Reg_Write(pHwData, 0x0864, ltmp);
+ } else { /* reg12 = 0x00147c at Channel 4920 ~ 5320 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00147c;
+ Wb35Reg_Write(pHwData, 0x0864, ltmp);
}
- else if( Channel.band == BAND_TYPE_OFDM_5 )
- {
- //Update Reg12
- if ((Channel.ChanNo > 64) && (Channel.ChanNo <= 165))
- {
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00143c;
- Wb35Reg_Write( pHwData, 0x0864, ltmp );
- }
- else //reg12 = 0x00147c at Channel 4920 ~ 5320
- {
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | 0x00147c;
- Wb35Reg_Write( pHwData, 0x0864, ltmp );
- }
- count = sizeof(al7230_channel_data_5) / sizeof(al7230_channel_data_5[0]);
+ count = sizeof(al7230_channel_data_5) / sizeof(al7230_channel_data_5[0]);
- for (i=0; i<count; i++)
- {
- if (al7230_channel_data_5[i][0] == Channel.ChanNo)
- {
- for( j=0; j<3; j++ )
- pltmp[j] = (1 << 31) | (0 << 30) | (24 << 24) | ( al7230_channel_data_5[i][j+1]&0xffffff);
- Wb35Reg_BurstWrite( pHwData, 0x0864, pltmp, 3, NO_INCREMENT );
- }
+ for (i = 0; i < count; i++) {
+ if (al7230_channel_data_5[i][0] == Channel.ChanNo) {
+ for (j = 0; j < 3; j++)
+ pltmp[j] = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_channel_data_5[i][j+1] & 0xffffff);
+ Wb35Reg_BurstWrite(pHwData, 0x0864, pltmp, 3, NO_INCREMENT);
}
}
- set_tx_power_per_channel_al7230(pHwData, Channel);
- break;
-
- case RF_WB_242:
- case RF_WB_242_1: // 20060619.5 Add
+ }
+ set_tx_power_per_channel_al7230(pHwData, Channel);
+ break;
+ case RF_WB_242:
+ case RF_WB_242_1:
- if( Channel.band <= BAND_TYPE_OFDM_24 ) // channel 1 ~ 14
- {
- ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( w89rf242_channel_data_24[Channel.ChanNo-1][0], 24);
- Wb35Reg_Write( pHwData, 0x864, ltmp );
- }
- set_tx_power_per_channel_wb242(pHwData, Channel);
- break;
+ if (Channel.band <= BAND_TYPE_OFDM_24) { /* channel 1 ~ 14 */
+ ltmp = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_channel_data_24[Channel.ChanNo-1][0], 24);
+ Wb35Reg_Write(pHwData, 0x864, ltmp);
+ }
+ set_tx_power_per_channel_wb242(pHwData, Channel);
+ break;
}
- if( Channel.band <= BAND_TYPE_OFDM_24 )
- {
- // BB: select 2.4 GHz, bit[12-11]=00
- reg->BB50 &= ~(BIT(11)|BIT(12));
- Wb35Reg_Write( pHwData, 0x1050, reg->BB50 ); // MODE_Ctrl
- // MAC: select 2.4 GHz, bit[5]=0
+ if (Channel.band <= BAND_TYPE_OFDM_24) {
+ /* BB: select 2.4 GHz, bit[12-11]=00 */
+ reg->BB50 &= ~(BIT(11) | BIT(12));
+ Wb35Reg_Write(pHwData, 0x1050, reg->BB50); /* MODE_Ctrl */
+ /* MAC: select 2.4 GHz, bit[5]=0 */
reg->M78_ERPInformation &= ~BIT(5);
- Wb35Reg_Write( pHwData, 0x0878, reg->M78_ERPInformation );
- // enable 11b Baseband
+ Wb35Reg_Write(pHwData, 0x0878, reg->M78_ERPInformation);
+ /* enable 11b Baseband */
reg->BB30 &= ~BIT(31);
- Wb35Reg_Write( pHwData, 0x1030, reg->BB30 );
- }
- else if( (Channel.band == BAND_TYPE_OFDM_5) )
- {
- // BB: select 5 GHz
- reg->BB50 &= ~(BIT(11)|BIT(12));
- if (Channel.ChanNo <=64 )
- reg->BB50 |= BIT(12); // 10-5.25GHz
+ Wb35Reg_Write(pHwData, 0x1030, reg->BB30);
+ } else if (Channel.band == BAND_TYPE_OFDM_5) {
+ /* BB: select 5 GHz */
+ reg->BB50 &= ~(BIT(11) | BIT(12));
+ if (Channel.ChanNo <= 64)
+ reg->BB50 |= BIT(12); /* 10-5.25GHz */
else if ((Channel.ChanNo >= 100) && (Channel.ChanNo <= 124))
- reg->BB50 |= BIT(11); // 01-5.48GHz
- else if ((Channel.ChanNo >=128) && (Channel.ChanNo <= 161))
- reg->BB50 |= (BIT(12)|BIT(11)); // 11-5.775GHz
- else //Chan 184 ~ 196 will use bit[12-11] = 10 in version sh-src-1.2.25
+ reg->BB50 |= BIT(11); /* 01-5.48GHz */
+ else if ((Channel.ChanNo >= 128) && (Channel.ChanNo <= 161))
+ reg->BB50 |= (BIT(12) | BIT(11)); /* 11-5.775GHz */
+ else /* Chan 184 ~ 196 will use bit[12-11] = 10 in version sh-src-1.2.25 */
reg->BB50 |= BIT(12);
- Wb35Reg_Write( pHwData, 0x1050, reg->BB50 ); // MODE_Ctrl
+ Wb35Reg_Write(pHwData, 0x1050, reg->BB50); /* MODE_Ctrl */
- //(1) M78 should alway use 2.4G setting when using RF_AIROHA_7230
- //(2) BB30 has been updated previously.
- if (pHwData->phy_type != RF_AIROHA_7230)
- {
- // MAC: select 5 GHz, bit[5]=1
+ /* (1) M78 should alway use 2.4G setting when using RF_AIROHA_7230 */
+ /* (2) BB30 has been updated previously. */
+ if (pHwData->phy_type != RF_AIROHA_7230) {
+ /* MAC: select 5 GHz, bit[5]=1 */
reg->M78_ERPInformation |= BIT(5);
- Wb35Reg_Write( pHwData, 0x0878, reg->M78_ERPInformation );
+ Wb35Reg_Write(pHwData, 0x0878, reg->M78_ERPInformation);
- // disable 11b Baseband
+ /* disable 11b Baseband */
reg->BB30 |= BIT(31);
- Wb35Reg_Write( pHwData, 0x1030, reg->BB30 );
+ Wb35Reg_Write(pHwData, 0x1030, reg->BB30);
}
}
}
-//Set the tx power directly from DUT GUI, not from the EEPROM. Return the current setting
-u8 RFSynthesizer_SetPowerIndex( struct hw_data * pHwData, u8 PowerIndex )
+/*
+ * Set the tx power directly from DUT GUI, not from the EEPROM.
+ * Return the current setting
+ */
+u8 RFSynthesizer_SetPowerIndex(struct hw_data *pHwData, u8 PowerIndex)
{
u32 Band = pHwData->band;
- u8 index=0;
+ u8 index = 0;
- if( pHwData->power_index == PowerIndex ) // 20060620.1 Add
+ if (pHwData->power_index == PowerIndex)
return PowerIndex;
- if (RF_MAXIM_2825 == pHwData->phy_type)
- {
- // Channel 1 - 13
- index = RFSynthesizer_SetMaxim2825Power( pHwData, PowerIndex );
- }
- else if (RF_MAXIM_2827 == pHwData->phy_type)
- {
- if( Band <= BAND_TYPE_OFDM_24 ) // Channel 1 - 13
- index = RFSynthesizer_SetMaxim2827_24Power( pHwData, PowerIndex );
- else// if( Band == BAND_TYPE_OFDM_5 ) // Channel 36 - 64
- index = RFSynthesizer_SetMaxim2827_50Power( pHwData, PowerIndex );
- }
- else if (RF_MAXIM_2828 == pHwData->phy_type)
- {
- if( Band <= BAND_TYPE_OFDM_24 ) // Channel 1 - 13
- index = RFSynthesizer_SetMaxim2828_24Power( pHwData, PowerIndex );
- else// if( Band == BAND_TYPE_OFDM_5 ) // Channel 36 - 64
- index = RFSynthesizer_SetMaxim2828_50Power( pHwData, PowerIndex );
- }
- else if( RF_AIROHA_2230 == pHwData->phy_type )
- {
- //Power index: 0 ~ 63 // Channel 1 - 14
- index = RFSynthesizer_SetAiroha2230Power( pHwData, PowerIndex );
- index = (u8)al2230_txvga_data[index][1];
- }
- else if( RF_AIROHA_2230S == pHwData->phy_type ) // 20060420 Add this
- {
- //Power index: 0 ~ 63 // Channel 1 - 14
- index = RFSynthesizer_SetAiroha2230Power( pHwData, PowerIndex );
- index = (u8)al2230_txvga_data[index][1];
- }
- else if( RF_AIROHA_7230 == pHwData->phy_type )
- {
- //Power index: 0 ~ 63
- index = RFSynthesizer_SetAiroha7230Power( pHwData, PowerIndex );
+ if (RF_MAXIM_2825 == pHwData->phy_type) {
+ /* Channel 1 - 13 */
+ index = RFSynthesizer_SetMaxim2825Power(pHwData, PowerIndex);
+ } else if (RF_MAXIM_2827 == pHwData->phy_type) {
+ if (Band <= BAND_TYPE_OFDM_24) /* Channel 1 - 13 */
+ index = RFSynthesizer_SetMaxim2827_24Power(pHwData, PowerIndex);
+ else /* Channel 36 - 64 */
+ index = RFSynthesizer_SetMaxim2827_50Power(pHwData, PowerIndex);
+ } else if (RF_MAXIM_2828 == pHwData->phy_type) {
+ if (Band <= BAND_TYPE_OFDM_24) /* Channel 1 - 13 */
+ index = RFSynthesizer_SetMaxim2828_24Power(pHwData, PowerIndex);
+ else /* Channel 36 - 64 */
+ index = RFSynthesizer_SetMaxim2828_50Power(pHwData, PowerIndex);
+ } else if (RF_AIROHA_2230 == pHwData->phy_type) {
+ /* Power index: 0 ~ 63 --- Channel 1 - 14 */
+ index = RFSynthesizer_SetAiroha2230Power(pHwData, PowerIndex);
+ index = (u8) al2230_txvga_data[index][1];
+ } else if (RF_AIROHA_2230S == pHwData->phy_type) {
+ /* Power index: 0 ~ 63 --- Channel 1 - 14 */
+ index = RFSynthesizer_SetAiroha2230Power(pHwData, PowerIndex);
+ index = (u8) al2230_txvga_data[index][1];
+ } else if (RF_AIROHA_7230 == pHwData->phy_type) {
+ /* Power index: 0 ~ 63 */
+ index = RFSynthesizer_SetAiroha7230Power(pHwData, PowerIndex);
index = (u8)al7230_txvga_data[index][1];
- }
- else if( (RF_WB_242 == pHwData->phy_type) ||
- (RF_WB_242_1 == pHwData->phy_type) ) // 20060619.5 Add
- {
- //Power index: 0 ~ 19 for original. New range is 0 ~ 33
- index = RFSynthesizer_SetWinbond242Power( pHwData, PowerIndex );
+ } else if ((RF_WB_242 == pHwData->phy_type) ||
+ (RF_WB_242_1 == pHwData->phy_type)) {
+ /* Power index: 0 ~ 19 for original. New range is 0 ~ 33 */
+ index = RFSynthesizer_SetWinbond242Power(pHwData, PowerIndex);
index = (u8)w89rf242_txvga_data[index][1];
}
- pHwData->power_index = index; // Backup current
+ pHwData->power_index = index; /* Backup current */
return index;
}
-//-- Sub function
-u8 RFSynthesizer_SetMaxim2828_24Power( struct hw_data * pHwData, u8 index )
+/* -- Sub function */
+u8 RFSynthesizer_SetMaxim2828_24Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_power_data_24[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_24[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetMaxim2828_50Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetMaxim2828_50Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2828_power_data_50[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2828_power_data_50[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetMaxim2827_24Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetMaxim2827_24Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_power_data_24[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_24[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetMaxim2827_50Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetMaxim2827_50Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2827_power_data_50[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2827_power_data_50[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetMaxim2825Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetMaxim2825Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- if( index > 1 ) index = 1;
- PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse( max2825_power_data_24[index], 18);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ u32 PowerData;
+ if (index > 1)
+ index = 1;
+ PowerData = (1 << 31) | (0 << 30) | (18 << 24) | BitReverse(max2825_power_data_24[index], 18);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return index;
}
-//--
-u8 RFSynthesizer_SetAiroha2230Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetAiroha2230Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- u8 i,count;
+ u32 PowerData;
+ u8 i, count;
count = sizeof(al2230_txvga_data) / sizeof(al2230_txvga_data[0]);
- for (i=0; i<count; i++)
- {
+ for (i = 0; i < count; i++) {
if (al2230_txvga_data[i][1] >= index)
break;
}
if (i == count)
i--;
- PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( al2230_txvga_data[i][0], 20);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse(al2230_txvga_data[i][0], 20);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return i;
}
-//--
-u8 RFSynthesizer_SetAiroha7230Power( struct hw_data * pHwData, u8 index )
+
+u8 RFSynthesizer_SetAiroha7230Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- u8 i,count;
+ u32 PowerData;
+ u8 i, count;
- //PowerData = (1 << 31) | (0 << 30) | (20 << 24) | BitReverse( airoha_power_data_24[index], 20);
count = sizeof(al7230_txvga_data) / sizeof(al7230_txvga_data[0]);
- for (i=0; i<count; i++)
- {
+ for (i = 0; i < count; i++) {
if (al7230_txvga_data[i][1] >= index)
break;
}
if (i == count)
i--;
- PowerData = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_txvga_data[i][0]&0xffffff);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ PowerData = (1 << 31) | (0 << 30) | (24 << 24) | (al7230_txvga_data[i][0] & 0xffffff);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
return i;
}
-u8 RFSynthesizer_SetWinbond242Power( struct hw_data * pHwData, u8 index )
+u8 RFSynthesizer_SetWinbond242Power(struct hw_data *pHwData, u8 index)
{
- u32 PowerData;
- u8 i,count;
+ u32 PowerData;
+ u8 i, count;
count = sizeof(w89rf242_txvga_data) / sizeof(w89rf242_txvga_data[0]);
- for (i=0; i<count; i++)
- {
+ for (i = 0; i < count; i++) {
if (w89rf242_txvga_data[i][1] >= index)
break;
}
if (i == count)
i--;
- // Set TxVga into RF
- PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( w89rf242_txvga_data[i][0], 24);
- Wb35Reg_Write( pHwData, 0x0864, PowerData );
-
- // Update BB48 BB4C BB58 for high precision txvga
- Wb35Reg_Write( pHwData, 0x1048, w89rf242_txvga_data[i][2] );
- Wb35Reg_Write( pHwData, 0x104c, w89rf242_txvga_data[i][3] );
- Wb35Reg_Write( pHwData, 0x1058, w89rf242_txvga_data[i][4] );
-
-// Rf vga 0 ~ 3 for temperature compensate. It will affect the scan Bss.
-// The i value equals to 8 or 7 usually. So It's not necessary to setup this RF register.
-// if( i <= 3 )
-// PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( 0x000024, 24 );
-// else
-// PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse( 0x001824, 24 );
-// Wb35Reg_Write( pHwData, 0x0864, PowerData );
+ /* Set TxVga into RF */
+ PowerData = (1 << 31) | (0 << 30) | (24 << 24) | BitReverse(w89rf242_txvga_data[i][0], 24);
+ Wb35Reg_Write(pHwData, 0x0864, PowerData);
+
+ /* Update BB48 BB4C BB58 for high precision txvga */
+ Wb35Reg_Write(pHwData, 0x1048, w89rf242_txvga_data[i][2]);
+ Wb35Reg_Write(pHwData, 0x104c, w89rf242_txvga_data[i][3]);
+ Wb35Reg_Write(pHwData, 0x1058, w89rf242_txvga_data[i][4]);
+
return i;
}
-//===========================================================================================================
-// Dxx_initial --
-// Mxx_initial --
- //
-// Routine Description:
-// Initial the hardware setting and module variable
- //
-//===========================================================================================================
-void Dxx_initial( struct hw_data * pHwData )
+/*
+ * ===========================================================================
+ * Dxx_initial --
+ * Mxx_initial --
+ *
+ * Routine Description:
+ * Initial the hardware setting and module variable
+ * ===========================================================================
+ */
+void Dxx_initial(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
- // Old IC:Single mode only.
- // New IC: operation decide by Software set bit[4]. 1:multiple 0: single
- reg->D00_DmaControl = 0xc0000004; //Txon, Rxon, multiple Rx for new 4k DMA
- //Txon, Rxon, single Rx for old 8k ASIC
- if( !HAL_USB_MODE_BURST( pHwData ) )
- reg->D00_DmaControl = 0xc0000000;//Txon, Rxon, single Rx for new 4k DMA
+ /*
+ * Old IC: Single mode only.
+ * New IC: operation decide by Software set bit[4]. 1:multiple 0: single
+ */
+ reg->D00_DmaControl = 0xc0000004; /* Txon, Rxon, multiple Rx for new 4k DMA */
+ /* Txon, Rxon, single Rx for old 8k ASIC */
+ if (!HAL_USB_MODE_BURST(pHwData))
+ reg->D00_DmaControl = 0xc0000000; /* Txon, Rxon, single Rx for new 4k DMA */
- Wb35Reg_WriteSync( pHwData, 0x0400, reg->D00_DmaControl );
+ Wb35Reg_WriteSync(pHwData, 0x0400, reg->D00_DmaControl);
}
-void Mxx_initial( struct hw_data * pHwData )
+void Mxx_initial(struct hw_data *pHwData)
{
struct wb35_reg *reg = &pHwData->reg;
- u32 tmp;
- u32 pltmp[11];
+ u32 tmp;
+ u32 pltmp[11];
u16 i;
- //======================================================
- // Initial Mxx register
- //======================================================
+ /*
+ * ======================================================
+ * Initial Mxx register
+ * ======================================================
+ */
- // M00 bit set
-#ifdef _IBSS_BEACON_SEQ_STICK_
- reg->M00_MacControl = 0; // Solve beacon sequence number stop by software
-#else
- reg->M00_MacControl = 0x80000000; // Solve beacon sequence number stop by hardware
-#endif
+ /* M00 bit set */
+ #ifdef _IBSS_BEACON_SEQ_STICK_
+ reg->M00_MacControl = 0; /* Solve beacon sequence number stop by software */
+ #else
+ reg->M00_MacControl = 0x80000000; /* Solve beacon sequence number stop by hardware */
+ #endif
- // M24 disable enter power save, BB RxOn and enable NAV attack
+ /* M24 disable enter power save, BB RxOn and enable NAV attack */
reg->M24_MacControl = 0x08040042;
pltmp[0] = reg->M24_MacControl;
- pltmp[1] = 0; // Skip M28, because no initialize value is required.
+ pltmp[1] = 0; /* Skip M28, because no initialize value is required. */
- // M2C CWmin and CWmax setting
+ /* M2C CWmin and CWmax setting */
pHwData->cwmin = DEFAULT_CWMIN;
pHwData->cwmax = DEFAULT_CWMAX;
reg->M2C_MacControl = DEFAULT_CWMIN << 10;
reg->M2C_MacControl |= DEFAULT_CWMAX;
pltmp[2] = reg->M2C_MacControl;
- // M30 BSSID
+ /* M30 BSSID */
pltmp[3] = *(u32 *)pHwData->bssid;
- // M34
+ /* M34 */
pHwData->AID = DEFAULT_AID;
- tmp = *(u16 *)(pHwData->bssid+4);
+ tmp = *(u16 *) (pHwData->bssid + 4);
tmp |= DEFAULT_AID << 16;
pltmp[4] = tmp;
- // M38
- reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT<<8) | (DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;
+ /* M38 */
+ reg->M38_MacControl = (DEFAULT_RATE_RETRY_LIMIT << 8) | (DEFAULT_LONG_RETRY_LIMIT << 4) | DEFAULT_SHORT_RETRY_LIMIT;
pltmp[5] = reg->M38_MacControl;
- // M3C
+ /* M3C */
tmp = (DEFAULT_PIFST << 26) | (DEFAULT_EIFST << 16) | (DEFAULT_DIFST << 8) | (DEFAULT_SIFST << 4) | DEFAULT_OSIFST ;
reg->M3C_MacControl = tmp;
pltmp[6] = tmp;
- // M40
+ /* M40 */
pHwData->slot_time_select = DEFAULT_SLOT_TIME;
tmp = (DEFAULT_ATIMWD << 16) | DEFAULT_SLOT_TIME;
reg->M40_MacControl = tmp;
pltmp[7] = tmp;
- // M44
- tmp = DEFAULT_MAX_TX_MSDU_LIFE_TIME << 10; // *1024
+ /* M44 */
+ tmp = DEFAULT_MAX_TX_MSDU_LIFE_TIME << 10; /* *1024 */
reg->M44_MacControl = tmp;
pltmp[8] = tmp;
- // M48
+ /* M48 */
pHwData->BeaconPeriod = DEFAULT_BEACON_INTERVAL;
pHwData->ProbeDelay = DEFAULT_PROBE_DELAY_TIME;
tmp = (DEFAULT_BEACON_INTERVAL << 16) | DEFAULT_PROBE_DELAY_TIME;
reg->M48_MacControl = tmp;
pltmp[9] = tmp;
- //M4C
+ /* M4C */
reg->M4C_MacStatus = (DEFAULT_PROTOCOL_VERSION << 30) | (DEFAULT_MAC_POWER_STATE << 28) | (DEFAULT_DTIM_ALERT_TIME << 24);
pltmp[10] = reg->M4C_MacStatus;
- // Burst write
- //Wb35Reg_BurstWrite( pHwData, 0x0824, pltmp, 11, AUTO_INCREMENT );
- for( i=0; i<11; i++ )
- Wb35Reg_WriteSync( pHwData, 0x0824 + i*4, pltmp[i] );
+ for (i = 0; i < 11; i++)
+ Wb35Reg_WriteSync(pHwData, 0x0824 + i * 4, pltmp[i]);
- // M60
- Wb35Reg_WriteSync( pHwData, 0x0860, 0x12481248 );
+ /* M60 */
+ Wb35Reg_WriteSync(pHwData, 0x0860, 0x12481248);
reg->M60_MacControl = 0x12481248;
- // M68
- Wb35Reg_WriteSync( pHwData, 0x0868, 0x00050900 ); // 20051018 0x000F0F00 ); // 940930 0x00131300
+ /* M68 */
+ Wb35Reg_WriteSync(pHwData, 0x0868, 0x00050900);
reg->M68_MacControl = 0x00050900;
- // M98
- Wb35Reg_WriteSync( pHwData, 0x0898, 0xffff8888 );
+ /* M98 */
+ Wb35Reg_WriteSync(pHwData, 0x0898, 0xffff8888);
reg->M98_MacControl = 0xffff8888;
}
-void Uxx_power_off_procedure( struct hw_data * pHwData )
+void Uxx_power_off_procedure(struct hw_data *pHwData)
{
- // SW, PMU reset and turn off clock
- Wb35Reg_WriteSync( pHwData, 0x03b0, 3 );
- Wb35Reg_WriteSync( pHwData, 0x03f0, 0xf9 );
+ /* SW, PMU reset and turn off clock */
+ Wb35Reg_WriteSync(pHwData, 0x03b0, 3);
+ Wb35Reg_WriteSync(pHwData, 0x03f0, 0xf9);
}
-//Decide the TxVga of every channel
-void GetTxVgaFromEEPROM( struct hw_data * pHwData )
+/*Decide the TxVga of every channel */
+void GetTxVgaFromEEPROM(struct hw_data *pHwData)
{
- u32 i, j, ltmp;
- u16 Value[MAX_TXVGA_EEPROM];
- u8 *pctmp;
- u8 ctmp=0;
-
- // Get the entire TxVga setting in EEPROM
- for( i=0; i<MAX_TXVGA_EEPROM; i++ )
- {
- Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08100000 + 0x00010000*i );
- Wb35Reg_ReadSync( pHwData, 0x03b4, <mp );
- Value[i] = (u16)( ltmp & 0xffff ); // Get 16 bit available
- Value[i] = cpu_to_le16( Value[i] ); // [7:0]2412 [7:0]2417 ....
+ u32 i, j, ltmp;
+ u16 Value[MAX_TXVGA_EEPROM];
+ u8 *pctmp;
+ u8 ctmp = 0;
+
+ /* Get the entire TxVga setting in EEPROM */
+ for (i = 0; i < MAX_TXVGA_EEPROM; i++) {
+ Wb35Reg_WriteSync(pHwData, 0x03b4, 0x08100000 + 0x00010000 * i);
+ Wb35Reg_ReadSync(pHwData, 0x03b4, <mp);
+ Value[i] = (u16) (ltmp & 0xffff); /* Get 16 bit available */
+ Value[i] = cpu_to_le16(Value[i]); /* [7:0]2412 [7:0]2417 .... */
}
- // Adjust the filed which fills with reserved value.
- pctmp = (u8 *)Value;
- for( i=0; i<(MAX_TXVGA_EEPROM*2); i++ )
- {
- if( pctmp[i] != 0xff )
+ /* Adjust the filed which fills with reserved value. */
+ pctmp = (u8 *) Value;
+ for (i = 0; i < (MAX_TXVGA_EEPROM * 2); i++) {
+ if (pctmp[i] != 0xff)
ctmp = pctmp[i];
else
pctmp[i] = ctmp;
}
- // Adjust WB_242 to WB_242_1 TxVga scale
- if( pHwData->phy_type == RF_WB_242 )
- {
- for( i=0; i<4; i++ ) // Only 2412 2437 2462 2484 case must be modified
- {
- for( j=0; j<(sizeof(w89rf242_txvga_old_mapping)/sizeof(w89rf242_txvga_old_mapping[0])); j++ )
- {
- if( pctmp[i] < (u8)w89rf242_txvga_old_mapping[j][1] )
- {
- pctmp[i] = (u8)w89rf242_txvga_old_mapping[j][0];
+ /* Adjust WB_242 to WB_242_1 TxVga scale */
+ if (pHwData->phy_type == RF_WB_242) {
+ for (i = 0; i < 4; i++) { /* Only 2412 2437 2462 2484 case must be modified */
+ for (j = 0; j < (sizeof(w89rf242_txvga_old_mapping) / sizeof(w89rf242_txvga_old_mapping[0])); j++) {
+ if (pctmp[i] < (u8) w89rf242_txvga_old_mapping[j][1]) {
+ pctmp[i] = (u8) w89rf242_txvga_old_mapping[j][0];
break;
}
}
- if( j == (sizeof(w89rf242_txvga_old_mapping)/sizeof(w89rf242_txvga_old_mapping[0])) )
+ if (j == (sizeof(w89rf242_txvga_old_mapping) / sizeof(w89rf242_txvga_old_mapping[0])))
pctmp[i] = (u8)w89rf242_txvga_old_mapping[j-1][0];
}
}
- // 20060621 Add
- memcpy( pHwData->TxVgaSettingInEEPROM, pctmp, MAX_TXVGA_EEPROM*2 ); //MAX_TXVGA_EEPROM is u16 count
- EEPROMTxVgaAdjust( pHwData );
+ memcpy(pHwData->TxVgaSettingInEEPROM, pctmp, MAX_TXVGA_EEPROM * 2); /* MAX_TXVGA_EEPROM is u16 count */
+ EEPROMTxVgaAdjust(pHwData);
}
-// This function will affect the TxVga parameter in HAL. If hal_set_current_channel
-// or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect.
-// TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for IS89C35
-// This function will use default TxVgaSettingInEEPROM data to calculate new TxVga.
-void EEPROMTxVgaAdjust( struct hw_data * pHwData ) // 20060619.5 Add
+/*
+ * This function will affect the TxVga parameter in HAL. If hal_set_current_channel
+ * or RFSynthesizer_SetPowerIndex be called, new TxVga will take effect.
+ * TxVgaSettingInEEPROM of sHwData is an u8 array point to EEPROM contain for IS89C35
+ * This function will use default TxVgaSettingInEEPROM data to calculate new TxVga.
+ */
+void EEPROMTxVgaAdjust(struct hw_data *pHwData)
{
- u8 * pTxVga = pHwData->TxVgaSettingInEEPROM;
- s16 i, stmp;
+ u8 *pTxVga = pHwData->TxVgaSettingInEEPROM;
+ s16 i, stmp;
- //-- 2.4G -- 20060704.2 Request from Tiger
- //channel 1 ~ 5
+ /* -- 2.4G -- */
+ /* channel 1 ~ 5 */
stmp = pTxVga[1] - pTxVga[0];
- for( i=0; i<5; i++ )
- pHwData->TxVgaFor24[i] = pTxVga[0] + stmp*i/4;
- //channel 6 ~ 10
+ for (i = 0; i < 5; i++)
+ pHwData->TxVgaFor24[i] = pTxVga[0] + stmp * i / 4;
+ /* channel 6 ~ 10 */
stmp = pTxVga[2] - pTxVga[1];
- for( i=5; i<10; i++ )
- pHwData->TxVgaFor24[i] = pTxVga[1] + stmp*(i-5)/4;
- //channel 11 ~ 13
+ for (i = 5; i < 10; i++)
+ pHwData->TxVgaFor24[i] = pTxVga[1] + stmp * (i - 5) / 4;
+ /* channel 11 ~ 13 */
stmp = pTxVga[3] - pTxVga[2];
- for( i=10; i<13; i++ )
- pHwData->TxVgaFor24[i] = pTxVga[2] + stmp*(i-10)/2;
- //channel 14
+ for (i = 10; i < 13; i++)
+ pHwData->TxVgaFor24[i] = pTxVga[2] + stmp * (i - 10) / 2;
+ /* channel 14 */
pHwData->TxVgaFor24[13] = pTxVga[3];
- //-- 5G --
- if( pHwData->phy_type == RF_AIROHA_7230 )
- {
- //channel 184
+ /* -- 5G -- */
+ if (pHwData->phy_type == RF_AIROHA_7230) {
+ /* channel 184 */
pHwData->TxVgaFor50[0].ChanNo = 184;
pHwData->TxVgaFor50[0].TxVgaValue = pTxVga[4];
- //channel 196
+ /* channel 196 */
pHwData->TxVgaFor50[3].ChanNo = 196;
pHwData->TxVgaFor50[3].TxVgaValue = pTxVga[5];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[1].ChanNo = 188;
pHwData->TxVgaFor50[2].ChanNo = 192;
stmp = pTxVga[5] - pTxVga[4];
- pHwData->TxVgaFor50[2].TxVgaValue = pTxVga[5] - stmp/3;
- pHwData->TxVgaFor50[1].TxVgaValue = pTxVga[5] - stmp*2/3;
+ pHwData->TxVgaFor50[2].TxVgaValue = pTxVga[5] - stmp / 3;
+ pHwData->TxVgaFor50[1].TxVgaValue = pTxVga[5] - stmp * 2 / 3;
- //channel 16
+ /* channel 16 */
pHwData->TxVgaFor50[6].ChanNo = 16;
pHwData->TxVgaFor50[6].TxVgaValue = pTxVga[6];
pHwData->TxVgaFor50[4].ChanNo = 8;
@@ -2523,7 +2249,7 @@ void EEPROMTxVgaAdjust( struct hw_data * pHwData ) // 20060619.5 Add
pHwData->TxVgaFor50[5].ChanNo = 12;
pHwData->TxVgaFor50[5].TxVgaValue = pTxVga[6];
- //channel 36
+ /* channel 36 */
pHwData->TxVgaFor50[8].ChanNo = 36;
pHwData->TxVgaFor50[8].TxVgaValue = pTxVga[7];
pHwData->TxVgaFor50[7].ChanNo = 34;
@@ -2531,153 +2257,135 @@ void EEPROMTxVgaAdjust( struct hw_data * pHwData ) // 20060619.5 Add
pHwData->TxVgaFor50[9].ChanNo = 38;
pHwData->TxVgaFor50[9].TxVgaValue = pTxVga[7];
- //channel 40
+ /* channel 40 */
pHwData->TxVgaFor50[10].ChanNo = 40;
pHwData->TxVgaFor50[10].TxVgaValue = pTxVga[8];
- //channel 48
+ /* channel 48 */
pHwData->TxVgaFor50[14].ChanNo = 48;
pHwData->TxVgaFor50[14].TxVgaValue = pTxVga[9];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[11].ChanNo = 42;
pHwData->TxVgaFor50[12].ChanNo = 44;
pHwData->TxVgaFor50[13].ChanNo = 46;
stmp = pTxVga[9] - pTxVga[8];
- pHwData->TxVgaFor50[13].TxVgaValue = pTxVga[9] - stmp/4;
- pHwData->TxVgaFor50[12].TxVgaValue = pTxVga[9] - stmp*2/4;
- pHwData->TxVgaFor50[11].TxVgaValue = pTxVga[9] - stmp*3/4;
+ pHwData->TxVgaFor50[13].TxVgaValue = pTxVga[9] - stmp / 4;
+ pHwData->TxVgaFor50[12].TxVgaValue = pTxVga[9] - stmp * 2 / 4;
+ pHwData->TxVgaFor50[11].TxVgaValue = pTxVga[9] - stmp * 3 / 4;
- //channel 52
+ /* channel 52 */
pHwData->TxVgaFor50[15].ChanNo = 52;
pHwData->TxVgaFor50[15].TxVgaValue = pTxVga[10];
- //channel 64
+ /* channel 64 */
pHwData->TxVgaFor50[18].ChanNo = 64;
pHwData->TxVgaFor50[18].TxVgaValue = pTxVga[11];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[16].ChanNo = 56;
pHwData->TxVgaFor50[17].ChanNo = 60;
stmp = pTxVga[11] - pTxVga[10];
- pHwData->TxVgaFor50[17].TxVgaValue = pTxVga[11] - stmp/3;
- pHwData->TxVgaFor50[16].TxVgaValue = pTxVga[11] - stmp*2/3;
+ pHwData->TxVgaFor50[17].TxVgaValue = pTxVga[11] - stmp / 3;
+ pHwData->TxVgaFor50[16].TxVgaValue = pTxVga[11] - stmp * 2 / 3;
- //channel 100
+ /* channel 100 */
pHwData->TxVgaFor50[19].ChanNo = 100;
pHwData->TxVgaFor50[19].TxVgaValue = pTxVga[12];
- //channel 112
+ /* channel 112 */
pHwData->TxVgaFor50[22].ChanNo = 112;
pHwData->TxVgaFor50[22].TxVgaValue = pTxVga[13];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[20].ChanNo = 104;
pHwData->TxVgaFor50[21].ChanNo = 108;
stmp = pTxVga[13] - pTxVga[12];
- pHwData->TxVgaFor50[21].TxVgaValue = pTxVga[13] - stmp/3;
- pHwData->TxVgaFor50[20].TxVgaValue = pTxVga[13] - stmp*2/3;
+ pHwData->TxVgaFor50[21].TxVgaValue = pTxVga[13] - stmp / 3;
+ pHwData->TxVgaFor50[20].TxVgaValue = pTxVga[13] - stmp * 2 / 3;
- //channel 128
+ /* channel 128 */
pHwData->TxVgaFor50[26].ChanNo = 128;
pHwData->TxVgaFor50[26].TxVgaValue = pTxVga[14];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[23].ChanNo = 116;
pHwData->TxVgaFor50[24].ChanNo = 120;
pHwData->TxVgaFor50[25].ChanNo = 124;
stmp = pTxVga[14] - pTxVga[13];
- pHwData->TxVgaFor50[25].TxVgaValue = pTxVga[14] - stmp/4;
- pHwData->TxVgaFor50[24].TxVgaValue = pTxVga[14] - stmp*2/4;
- pHwData->TxVgaFor50[23].TxVgaValue = pTxVga[14] - stmp*3/4;
+ pHwData->TxVgaFor50[25].TxVgaValue = pTxVga[14] - stmp / 4;
+ pHwData->TxVgaFor50[24].TxVgaValue = pTxVga[14] - stmp * 2 / 4;
+ pHwData->TxVgaFor50[23].TxVgaValue = pTxVga[14] - stmp * 3 / 4;
- //channel 140
+ /* channel 140 */
pHwData->TxVgaFor50[29].ChanNo = 140;
pHwData->TxVgaFor50[29].TxVgaValue = pTxVga[15];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[27].ChanNo = 132;
pHwData->TxVgaFor50[28].ChanNo = 136;
stmp = pTxVga[15] - pTxVga[14];
- pHwData->TxVgaFor50[28].TxVgaValue = pTxVga[15] - stmp/3;
- pHwData->TxVgaFor50[27].TxVgaValue = pTxVga[15] - stmp*2/3;
+ pHwData->TxVgaFor50[28].TxVgaValue = pTxVga[15] - stmp / 3;
+ pHwData->TxVgaFor50[27].TxVgaValue = pTxVga[15] - stmp * 2 / 3;
- //channel 149
+ /* channel 149 */
pHwData->TxVgaFor50[30].ChanNo = 149;
pHwData->TxVgaFor50[30].TxVgaValue = pTxVga[16];
- //channel 165
+ /* channel 165 */
pHwData->TxVgaFor50[34].ChanNo = 165;
pHwData->TxVgaFor50[34].TxVgaValue = pTxVga[17];
- //interpolate
+ /* interpolate */
pHwData->TxVgaFor50[31].ChanNo = 153;
pHwData->TxVgaFor50[32].ChanNo = 157;
pHwData->TxVgaFor50[33].ChanNo = 161;
stmp = pTxVga[17] - pTxVga[16];
- pHwData->TxVgaFor50[33].TxVgaValue = pTxVga[17] - stmp/4;
- pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp*2/4;
- pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp*3/4;
+ pHwData->TxVgaFor50[33].TxVgaValue = pTxVga[17] - stmp / 4;
+ pHwData->TxVgaFor50[32].TxVgaValue = pTxVga[17] - stmp * 2 / 4;
+ pHwData->TxVgaFor50[31].TxVgaValue = pTxVga[17] - stmp * 3 / 4;
}
#ifdef _PE_STATE_DUMP_
- printk(" TxVgaFor24 : \n");
- DataDmp((u8 *)pHwData->TxVgaFor24, 14 ,0);
- printk(" TxVgaFor50 : \n");
- DataDmp((u8 *)pHwData->TxVgaFor50, 70 ,0);
+ printk(" TxVgaFor24 :\n");
+ DataDmp((u8 *)pHwData->TxVgaFor24, 14 , 0);
+ printk(" TxVgaFor50 :\n");
+ DataDmp((u8 *)pHwData->TxVgaFor50, 70 , 0);
#endif
}
-void BBProcessor_RateChanging( struct hw_data * pHwData, u8 rate ) // 20060613.1
+void BBProcessor_RateChanging(struct hw_data *pHwData, u8 rate)
{
struct wb35_reg *reg = &pHwData->reg;
- unsigned char Is11bRate;
+ unsigned char Is11bRate;
Is11bRate = (rate % 6) ? 1 : 0;
- switch( pHwData->phy_type )
- {
- case RF_AIROHA_2230:
- case RF_AIROHA_2230S: // 20060420 Add this
- if( Is11bRate )
- {
- if( (reg->BB48 != BB48_DEFAULT_AL2230_11B) &&
- (reg->BB4C != BB4C_DEFAULT_AL2230_11B) )
- {
- Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_AL2230_11B );
- Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_AL2230_11B );
- }
+ switch (pHwData->phy_type) {
+ case RF_AIROHA_2230:
+ case RF_AIROHA_2230S:
+ if (Is11bRate) {
+ if ((reg->BB48 != BB48_DEFAULT_AL2230_11B) &&
+ (reg->BB4C != BB4C_DEFAULT_AL2230_11B)) {
+ Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_AL2230_11B);
+ Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_AL2230_11B);
}
- else
- {
- if( (reg->BB48 != BB48_DEFAULT_AL2230_11G) &&
- (reg->BB4C != BB4C_DEFAULT_AL2230_11G) )
- {
- Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_AL2230_11G );
- Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_AL2230_11G );
- }
+ } else {
+ if ((reg->BB48 != BB48_DEFAULT_AL2230_11G) &&
+ (reg->BB4C != BB4C_DEFAULT_AL2230_11G)) {
+ Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_AL2230_11G);
+ Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_AL2230_11G);
}
- break;
-
- case RF_WB_242: // 20060623 The fix only for old TxVGA setting
- if( Is11bRate )
- {
- if( (reg->BB48 != BB48_DEFAULT_WB242_11B) &&
- (reg->BB4C != BB4C_DEFAULT_WB242_11B) )
- {
- reg->BB48 = BB48_DEFAULT_WB242_11B;
- reg->BB4C = BB4C_DEFAULT_WB242_11B;
- Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_WB242_11B );
- Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_WB242_11B );
- }
+ }
+ break;
+ case RF_WB_242:
+ if (Is11bRate) {
+ if ((reg->BB48 != BB48_DEFAULT_WB242_11B) &&
+ (reg->BB4C != BB4C_DEFAULT_WB242_11B)) {
+ reg->BB48 = BB48_DEFAULT_WB242_11B;
+ reg->BB4C = BB4C_DEFAULT_WB242_11B;
+ Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_WB242_11B);
+ Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_WB242_11B);
}
- else
- {
- if( (reg->BB48 != BB48_DEFAULT_WB242_11G) &&
- (reg->BB4C != BB4C_DEFAULT_WB242_11G) )
- {
- reg->BB48 = BB48_DEFAULT_WB242_11G;
- reg->BB4C = BB4C_DEFAULT_WB242_11G;
- Wb35Reg_Write( pHwData, 0x1048, BB48_DEFAULT_WB242_11G );
- Wb35Reg_Write( pHwData, 0x104c, BB4C_DEFAULT_WB242_11G );
- }
+ } else {
+ if ((reg->BB48 != BB48_DEFAULT_WB242_11G) &&
+ (reg->BB4C != BB4C_DEFAULT_WB242_11G)) {
+ reg->BB48 = BB48_DEFAULT_WB242_11G;
+ reg->BB4C = BB4C_DEFAULT_WB242_11G;
+ Wb35Reg_Write(pHwData, 0x1048, BB48_DEFAULT_WB242_11G);
+ Wb35Reg_Write(pHwData, 0x104c, BB4C_DEFAULT_WB242_11G);
}
- break;
+ }
+ break;
}
}
-
-
-
-
-
-
--
1.7.0.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] staging: winbond: reg.c Coding style fixes.
2010-03-20 15:14 [PATCH] staging: winbond: reg.c Coding style fixes Lars Lindley
@ 2010-03-20 16:24 ` Dan Carpenter
2010-03-20 19:21 ` Lars Lindley
0 siblings, 1 reply; 10+ messages in thread
From: Dan Carpenter @ 2010-03-20 16:24 UTC (permalink / raw)
To: Lars Lindley
Cc: gregkh, greg, penberg, pavel, harvey.harrison, devel,
linux-kernel
On Sat, Mar 20, 2010 at 04:14:11PM +0100, Lars Lindley wrote:
> I fixed all problems reported by checkpatch.pl except some
> (a lot of) long lines and some printk:s.
> I removed "commented away" code and version comments.
>
[snip]
> - msleep(10); // Modify 20051221.1.b
> - Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
> - msleep(10); // Modify 20051221.1.b
You removed this msleep().
> -
> + if (pHwData->phy_type <= RF_MAXIM_V1)
> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38);
> + else {
> + Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
> + msleep(10);
> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
In the new version it's commented out. ^^^^^^^^^^^^
I used a program to try verify that only white space changed.
http://lkml.indiana.edu/hypermail/linux/kernel/1003.1/01012.html
Then when it failed I grovelled through to find what changed.
Actually my tool complained about removed parenthesis as well. I think
this patch only removes one set of parenthesis. Please don't do that.
With a patch this size, it's nice to be able to use tools to verify that
it doesn't change anything, instead of checking it by hand. Tabs, spaces
and newlines only, please.
Obviously in the next patch you can send the one liner that remove the
parenthesis. We can eyeball one liners quite quickly.
regards,
dan carpenter
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] staging: winbond: reg.c Coding style fixes.
2010-03-20 16:24 ` Dan Carpenter
@ 2010-03-20 19:21 ` Lars Lindley
2010-03-21 6:58 ` Pavel Machek
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Lars Lindley @ 2010-03-20 19:21 UTC (permalink / raw)
To: Dan Carpenter, gregkh, greg, penberg, pavel, harvey.harrison,
devel, linux-kernel
On 2010-03-20 17:24, Dan Carpenter wrote:
> On Sat, Mar 20, 2010 at 04:14:11PM +0100, Lars Lindley wrote:
>> I fixed all problems reported by checkpatch.pl except some
>> (a lot of) long lines and some printk:s.
>> I removed "commented away" code and version comments.
>>
>
> [snip]
>
>> - msleep(10); // Modify 20051221.1.b
>> - Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
>> - msleep(10); // Modify 20051221.1.b
>
> You removed this msleep().
>
Oops! I think I was fooled by the strange comment on the line before..
>> -
>> + if (pHwData->phy_type <= RF_MAXIM_V1)
>> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38);
>> + else {
>> + Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
>> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
>> + msleep(10);
>> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
>
> In the new version it's commented out. ^^^^^^^^^^^^
>
> I used a program to try verify that only white space changed.
> http://lkml.indiana.edu/hypermail/linux/kernel/1003.1/01012.html
>
> Then when it failed I grovelled through to find what changed.
>
> Actually my tool complained about removed parenthesis as well. I think
> this patch only removes one set of parenthesis. Please don't do that.
> With a patch this size, it's nice to be able to use tools to verify that
> it doesn't change anything, instead of checking it by hand. Tabs, spaces
> and newlines only, please.
>
Point taken. Will keep it in mind from now on..
> Obviously in the next patch you can send the one liner that remove the
> parenthesis. We can eyeball one liners quite quickly.
>
> regards,
> dan carpenter
>
Here's a patch to fix my screw up :)
Now the .o doesn't differ before and after..
[PATCH] staging: winbond: reg.c Fix accidental commenting of msleep(10)
I accidentaly commented out msleep() in one place.
This applies after previous patch:
Message-Id: <1269098051-6594-1-git-send-email-lindley@coyote.org>
Signed-off-by: Lars Lindley <lindley@coyote.org>
---
drivers/staging/winbond/reg.c | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
index 2bddf8f..d9a8128 100644
--- a/drivers/staging/winbond/reg.c
+++ b/drivers/staging/winbond/reg.c
@@ -890,7 +890,8 @@ void Uxx_power_on_procedure(struct hw_data *pHwData)
Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
msleep(10);
- Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
+ Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and */
+ msleep(10);
ltmp = 0x4968;
if ((pHwData->phy_type == RF_WB_242) ||
(RF_WB_242_1 == pHwData->phy_type))
--
1.7.0.2
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] staging: winbond: reg.c Coding style fixes.
2010-03-20 19:21 ` Lars Lindley
@ 2010-03-21 6:58 ` Pavel Machek
2010-03-21 12:39 ` Pekka Enberg
2010-03-21 9:14 ` Dan Carpenter
2010-03-21 10:55 ` strip_whitespace.pl Dan Carpenter
2 siblings, 1 reply; 10+ messages in thread
From: Pavel Machek @ 2010-03-21 6:58 UTC (permalink / raw)
To: Lars Lindley
Cc: Dan Carpenter, gregkh, greg, penberg, harvey.harrison, devel,
linux-kernel
On Sat 2010-03-20 20:21:48, Lars Lindley wrote:
>
>
> On 2010-03-20 17:24, Dan Carpenter wrote:
> > On Sat, Mar 20, 2010 at 04:14:11PM +0100, Lars Lindley wrote:
> >> I fixed all problems reported by checkpatch.pl except some
> >> (a lot of) long lines and some printk:s.
> >> I removed "commented away" code and version comments.
> >>
> >
> > [snip]
> >
> >> - msleep(10); // Modify 20051221.1.b
> >> - Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
> >> - msleep(10); // Modify 20051221.1.b
> >
> > You removed this msleep().
> >
>
> Oops! I think I was fooled by the strange comment on the line before..
>
> >> -
> >> + if (pHwData->phy_type <= RF_MAXIM_V1)
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38);
> >> + else {
> >> + Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
> >> + msleep(10);
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
> >
> > In the new version it's commented out. ^^^^^^^^^^^^
> >
> > I used a program to try verify that only white space changed.
> > http://lkml.indiana.edu/hypermail/linux/kernel/1003.1/01012.html
> >
> > Then when it failed I grovelled through to find what changed.
> >
> > Actually my tool complained about removed parenthesis as well. I think
> > this patch only removes one set of parenthesis. Please don't do that.
> > With a patch this size, it's nice to be able to use tools to verify that
> > it doesn't change anything, instead of checking it by hand. Tabs, spaces
> > and newlines only, please.
> >
> Point taken. Will keep it in mind from now on..
>
> > Obviously in the next patch you can send the one liner that remove the
> > parenthesis. We can eyeball one liners quite quickly.
> >
> > regards,
> > dan carpenter
> >
>
>
> Here's a patch to fix my screw up :)
> Now the .o doesn't differ before and after..
> [PATCH] staging: winbond: reg.c Fix accidental commenting of msleep(10)
>
> I accidentaly commented out msleep() in one place.
> This applies after previous patch:
> Message-Id: <1269098051-6594-1-git-send-email-lindley@coyote.org>
>
> Signed-off-by: Lars Lindley <lindley@coyote.org>
Ack. but you probably want to merge those two pieces together.
> ---
> drivers/staging/winbond/reg.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
> index 2bddf8f..d9a8128 100644
> --- a/drivers/staging/winbond/reg.c
> +++ b/drivers/staging/winbond/reg.c
> @@ -890,7 +890,8 @@ void Uxx_power_on_procedure(struct hw_data *pHwData)
> Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
> Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
> msleep(10);
> - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and */
> + msleep(10);
> ltmp = 0x4968;
> if ((pHwData->phy_type == RF_WB_242) ||
> (RF_WB_242_1 == pHwData->phy_type))
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] staging: winbond: reg.c Coding style fixes.
2010-03-20 19:21 ` Lars Lindley
2010-03-21 6:58 ` Pavel Machek
@ 2010-03-21 9:14 ` Dan Carpenter
2010-03-21 10:55 ` strip_whitespace.pl Dan Carpenter
2 siblings, 0 replies; 10+ messages in thread
From: Dan Carpenter @ 2010-03-21 9:14 UTC (permalink / raw)
To: Lars Lindley
Cc: gregkh, greg, penberg, pavel, harvey.harrison, devel,
linux-kernel
On Sat, Mar 20, 2010 at 08:21:48PM +0100, Lars Lindley wrote:
>
>
> On 2010-03-20 17:24, Dan Carpenter wrote:
> > On Sat, Mar 20, 2010 at 04:14:11PM +0100, Lars Lindley wrote:
> >> I fixed all problems reported by checkpatch.pl except some
> >> (a lot of) long lines and some printk:s.
> >> I removed "commented away" code and version comments.
> >>
> >
> > [snip]
> >
> >> - msleep(10); // Modify 20051221.1.b
> >> - Wb35Reg_WriteSync( pHwData, 0x03d4, 0xb8 );// REG_ON RF_RSTN on, and
> >> - msleep(10); // Modify 20051221.1.b
> >
> > You removed this msleep().
> >
>
> Oops! I think I was fooled by the strange comment on the line before..
>
> >> -
> >> + if (pHwData->phy_type <= RF_MAXIM_V1)
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xffffff38);
> >> + else {
> >> + Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
> >> + msleep(10);
> >> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
> >
> > In the new version it's commented out. ^^^^^^^^^^^^
> >
> > I used a program to try verify that only white space changed.
> > http://lkml.indiana.edu/hypermail/linux/kernel/1003.1/01012.html
> >
> > Then when it failed I grovelled through to find what changed.
> >
> > Actually my tool complained about removed parenthesis as well. I think
> > this patch only removes one set of parenthesis. Please don't do that.
> > With a patch this size, it's nice to be able to use tools to verify that
> > it doesn't change anything, instead of checking it by hand. Tabs, spaces
> > and newlines only, please.
> >
> Point taken. Will keep it in mind from now on..
>
> > Obviously in the next patch you can send the one liner that remove the
> > parenthesis. We can eyeball one liners quite quickly.
> >
> > regards,
> > dan carpenter
> >
>
>
> Here's a patch to fix my screw up :)
> Now the .o doesn't differ before and after..
>
Could you post your config? I would think the curly brace change would
have made a difference even if all the line number changes didn't.
regards,
dan carpenter
>
> [PATCH] staging: winbond: reg.c Fix accidental commenting of msleep(10)
>
> I accidentaly commented out msleep() in one place.
> This applies after previous patch:
> Message-Id: <1269098051-6594-1-git-send-email-lindley@coyote.org>
>
> Signed-off-by: Lars Lindley <lindley@coyote.org>
> ---
> drivers/staging/winbond/reg.c | 3 ++-
> 1 files changed, 2 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c
> index 2bddf8f..d9a8128 100644
> --- a/drivers/staging/winbond/reg.c
> +++ b/drivers/staging/winbond/reg.c
> @@ -890,7 +890,8 @@ void Uxx_power_on_procedure(struct hw_data *pHwData)
> Wb35Reg_WriteSync(pHwData, 0x03f4, 0xFF5807FF);
> Wb35Reg_WriteSync(pHwData, 0x03d4, 0x80); /* regulator on only */
> msleep(10);
> - Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and msleep(10); */
> + Wb35Reg_WriteSync(pHwData, 0x03d4, 0xb8); /* REG_ON RF_RSTN on, and */
> + msleep(10);
> ltmp = 0x4968;
> if ((pHwData->phy_type == RF_WB_242) ||
> (RF_WB_242_1 == pHwData->phy_type))
> --
> 1.7.0.2
^ permalink raw reply [flat|nested] 10+ messages in thread
* strip_whitespace.pl
2010-03-20 19:21 ` Lars Lindley
2010-03-21 6:58 ` Pavel Machek
2010-03-21 9:14 ` Dan Carpenter
@ 2010-03-21 10:55 ` Dan Carpenter
2010-03-21 11:07 ` strip_whitespace.pl Dan Carpenter
2 siblings, 1 reply; 10+ messages in thread
From: Dan Carpenter @ 2010-03-21 10:55 UTC (permalink / raw)
To: Lars Lindley
Cc: gregkh, greg, penberg, pavel, harvey.harrison, devel,
linux-kernel
I've written a new script called strip_whitespace.pl (included).
One bug is that, if you split or unsplit a string literal that
confuses it. Otherwise it seems to work.
strip_whitespace.pl drivers/staging/winbond/reg.c > before
apply patch
strip_whitespace.pl drivers/staging/winbond/reg.c > after
`diff before after`. If they are the same then resend the patch.
regards,
dan carpenter
#!/usr/bin/perl
use strict;
my $file = shift();
open FILE, "<$file";
my $txt = do { local $/; <FILE> };
# strip C99 comments
$txt =~ s/\/\/.*//g;
# strip newlines
$txt =~ s/\n//g;
# strip remaining comments
$txt =~ s/\/\*.*?\*\///g;
# strip tabs
$txt =~ s/\t//g;
# strip spaces
$txt =~ s/ //g;
# add newlines again
$txt =~ s/;/;\n/g;
print "$txt\n";
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: strip_whitespace.pl
2010-03-21 10:55 ` strip_whitespace.pl Dan Carpenter
@ 2010-03-21 11:07 ` Dan Carpenter
2010-03-21 15:31 ` strip_whitespace.pl Lars Lindley
0 siblings, 1 reply; 10+ messages in thread
From: Dan Carpenter @ 2010-03-21 11:07 UTC (permalink / raw)
To: Lars Lindley, gregkh, greg, penberg, pavel, harvey.harrison,
devel, linux-kernel
On Sun, Mar 21, 2010 at 01:55:42PM +0300, Dan Carpenter wrote:
> I've written a new script called strip_whitespace.pl (included).
>
> One bug is that, if you split or unsplit a string literal that
> confuses it. Otherwise it seems to work.
>
> strip_whitespace.pl drivers/staging/winbond/reg.c > before
> apply patch
> strip_whitespace.pl drivers/staging/winbond/reg.c > after
>
> `diff before after`. If they are the same then resend the patch.
On further reflection your new patch looks fine, if you combine the two.
But next time could you use my script?
Acked-by: Dan Carpenter <error27@gmail.com>
regards,
dan carpenter
>
> regards,
> dan carpenter
>
> #!/usr/bin/perl
>
> use strict;
>
> my $file = shift();
> open FILE, "<$file";
> my $txt = do { local $/; <FILE> };
>
> # strip C99 comments
> $txt =~ s/\/\/.*//g;
> # strip newlines
> $txt =~ s/\n//g;
> # strip remaining comments
> $txt =~ s/\/\*.*?\*\///g;
> # strip tabs
> $txt =~ s/\t//g;
> # strip spaces
> $txt =~ s/ //g;
> # add newlines again
> $txt =~ s/;/;\n/g;
>
> print "$txt\n";
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] staging: winbond: reg.c Coding style fixes.
2010-03-21 6:58 ` Pavel Machek
@ 2010-03-21 12:39 ` Pekka Enberg
2010-03-21 15:40 ` Lars Lindley
0 siblings, 1 reply; 10+ messages in thread
From: Pekka Enberg @ 2010-03-21 12:39 UTC (permalink / raw)
To: Pavel Machek
Cc: Lars Lindley, Dan Carpenter, gregkh, greg, harvey.harrison, devel,
linux-kernel
Pavel Machek wrote:
>> [PATCH] staging: winbond: reg.c Fix accidental commenting of msleep(10)
>>
>> I accidentaly commented out msleep() in one place.
>> This applies after previous patch:
>> Message-Id: <1269098051-6594-1-git-send-email-lindley@coyote.org>
>>
>> Signed-off-by: Lars Lindley <lindley@coyote.org>
>
> Ack. but you probably want to merge those two pieces together.
Yes. Like I said before, please _check_ the result before posting your
patches. It's very easy to make silly mistakes in "trivial" patches like
these. Remember, it's not about quantity, it's about quality of each
individual patch no matter how trivial they might seem at first.
Pekka
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: strip_whitespace.pl
2010-03-21 11:07 ` strip_whitespace.pl Dan Carpenter
@ 2010-03-21 15:31 ` Lars Lindley
0 siblings, 0 replies; 10+ messages in thread
From: Lars Lindley @ 2010-03-21 15:31 UTC (permalink / raw)
To: Dan Carpenter, gregkh, greg, penberg, pavel, harvey.harrison,
devel, linux-kernel
Yes this seems like a good tool to use.
I will sure use it in the future..
/Lars
On 2010-03-21 12:07, Dan Carpenter wrote:
> On Sun, Mar 21, 2010 at 01:55:42PM +0300, Dan Carpenter wrote:
>> I've written a new script called strip_whitespace.pl (included).
>>
>> One bug is that, if you split or unsplit a string literal that
>> confuses it. Otherwise it seems to work.
>>
>> strip_whitespace.pl drivers/staging/winbond/reg.c > before
>> apply patch
>> strip_whitespace.pl drivers/staging/winbond/reg.c > after
>>
>> `diff before after`. If they are the same then resend the patch.
>
> On further reflection your new patch looks fine, if you combine the two.
> But next time could you use my script?
>
> Acked-by: Dan Carpenter <error27@gmail.com>
>
> regards,
> dan carpenter
>
>>
>> regards,
>> dan carpenter
>>
>> #!/usr/bin/perl
>>
>> use strict;
>>
>> my $file = shift();
>> open FILE, "<$file";
>> my $txt = do { local $/; <FILE> };
>>
>> # strip C99 comments
>> $txt =~ s/\/\/.*//g;
>> # strip newlines
>> $txt =~ s/\n//g;
>> # strip remaining comments
>> $txt =~ s/\/\*.*?\*\///g;
>> # strip tabs
>> $txt =~ s/\t//g;
>> # strip spaces
>> $txt =~ s/ //g;
>> # add newlines again
>> $txt =~ s/;/;\n/g;
>>
>> print "$txt\n";
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] staging: winbond: reg.c Coding style fixes.
2010-03-21 12:39 ` Pekka Enberg
@ 2010-03-21 15:40 ` Lars Lindley
0 siblings, 0 replies; 10+ messages in thread
From: Lars Lindley @ 2010-03-21 15:40 UTC (permalink / raw)
To: Pekka Enberg
Cc: Pavel Machek, Dan Carpenter, gregkh, greg, harvey.harrison, devel,
linux-kernel
Hi Pekka
I will check them more in the future.
I will come back with a new patch against master that combines the two commits
as soon as I get my head around how to get git to combine them.. :)
(And paint the little room in the appartment.. :)
/Lars
On 2010-03-21 13:39, Pekka Enberg wrote:
> Pavel Machek wrote:
>>> [PATCH] staging: winbond: reg.c Fix accidental commenting of msleep(10)
>>>
>>> I accidentaly commented out msleep() in one place.
>>> This applies after previous patch:
>>> Message-Id: <1269098051-6594-1-git-send-email-lindley@coyote.org>
>>>
>>> Signed-off-by: Lars Lindley <lindley@coyote.org>
>>
>> Ack. but you probably want to merge those two pieces together.
>
> Yes. Like I said before, please _check_ the result before posting your
> patches. It's very easy to make silly mistakes in "trivial" patches like
> these. Remember, it's not about quantity, it's about quality of each
> individual patch no matter how trivial they might seem at first.
>
> Pekka
>
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2010-03-21 15:40 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-03-20 15:14 [PATCH] staging: winbond: reg.c Coding style fixes Lars Lindley
2010-03-20 16:24 ` Dan Carpenter
2010-03-20 19:21 ` Lars Lindley
2010-03-21 6:58 ` Pavel Machek
2010-03-21 12:39 ` Pekka Enberg
2010-03-21 15:40 ` Lars Lindley
2010-03-21 9:14 ` Dan Carpenter
2010-03-21 10:55 ` strip_whitespace.pl Dan Carpenter
2010-03-21 11:07 ` strip_whitespace.pl Dan Carpenter
2010-03-21 15:31 ` strip_whitespace.pl Lars Lindley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox