From: Clemens Ladisch <clemens@ladisch.de>
To: Jesse Barnes <jbarnes@virtuousgeek.org>,
Alex Deucher <alexdeucher@gmail.com>
Cc: linux-pci@vger.kernel.org, dri-devel@lists.sourceforge.net,
linux-kernel@vger.kernel.org
Subject: [PATCH] PCI quirks: RS780/RS880: work around missing MSI initialization
Date: Mon, 22 Mar 2010 09:52:16 +0100 [thread overview]
Message-ID: <4BA72FC0.6060002@ladisch.de> (raw)
AMD says in section 2.5.4 (GFX MSI Enable) of #43291 (AMD 780G Family
Register Programming Requirements):
The SBIOS must enable internal graphics MSI capability in GCCFG by
setting the following: NBCFG.NB_CNTL.STRAP_MSI_ENABLE='1'
Quite a few BIOS writers misinterpret this sentence and think that
enabling MSI is an optional feature. However, clearing that bit just
prevents delivery of MSI messages but does not remove the MSI PCI
capabilities registers, and so leaves these devices unusable for any
driver that attempts to use MSI.
Setting that bit is not possible after the BIOS has locked down the
configuration registers, so we have to manually disable MSI for the
affected devices.
This fixes the codec communication errors in the HDA driver when
accessing the HDMI audio device, and allows us to get rid of the
overcautious quirk in radeon_irq_kms.c.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
---
drivers/pci/quirks.c | 31 +++++++++++++++++++++++++++++++
drivers/gpu/drm/radeon/radeon_irq_kms.c | 8 +-------
2 files changed, 32 insertions(+), 7 deletions(-)
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -2479,6 +2479,39 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AT
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4375,
quirk_msi_intx_disable_bug);
+/*
+ * MSI does not work with the AMD RS780/RS880 internal graphics and HDMI audio
+ * devices unless the BIOS has initialized the nb_cntl.strap_msi_enable bit.
+ */
+static void __init rs780_int_gfx_disable_msi(struct pci_dev *int_gfx_bridge)
+{
+ u32 nb_cntl;
+
+ if (!int_gfx_bridge->subordinate)
+ return;
+
+ pci_bus_write_config_dword(int_gfx_bridge->bus, PCI_DEVFN(0, 0),
+ 0x60, 0);
+ pci_bus_read_config_dword(int_gfx_bridge->bus, PCI_DEVFN(0, 0),
+ 0x64, &nb_cntl);
+
+ if (!(nb_cntl & BIT(10))) {
+ dev_warn(&int_gfx_bridge->dev,
+ FW_WARN "RS780: MSI for internal graphics disabled\n");
+ int_gfx_bridge->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MSI;
+ }
+}
+
+#define PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX 0x9602
+
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX,
+ rs780_int_gfx_disable_msi);
+/* wrong vendor ID on M4A785TD motherboard: */
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASUSTEK,
+ PCI_DEVICE_ID_AMD_RS780_P2P_INT_GFX,
+ rs780_int_gfx_disable_msi);
+
#endif /* CONFIG_PCI_MSI */
#ifdef CONFIG_PCI_IOV
--- a/drivers/gpu/drm/radeon/radeon_irq_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_irq_kms.c
@@ -116,13 +116,7 @@ int radeon_irq_kms_init(struct radeon_de
}
/* enable msi */
rdev->msi_enabled = 0;
- /* MSIs don't seem to work on my rs780;
- * not sure about rs880 or other rs780s.
- * Needs more investigation.
- */
- if ((rdev->family >= CHIP_RV380) &&
- (rdev->family != CHIP_RS780) &&
- (rdev->family != CHIP_RS880)) {
+ if (rdev->family >= CHIP_RV380) {
int ret = pci_enable_msi(rdev->pdev);
if (!ret) {
rdev->msi_enabled = 1;
next reply other threads:[~2010-03-22 8:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-22 8:52 Clemens Ladisch [this message]
2010-03-22 16:28 ` [PATCH] PCI quirks: RS780/RS880: work around missing MSI initialization Alex Deucher
2010-03-22 16:32 ` Jesse Barnes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BA72FC0.6060002@ladisch.de \
--to=clemens@ladisch.de \
--cc=alexdeucher@gmail.com \
--cc=dri-devel@lists.sourceforge.net \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox