Re: [PATCH 2/6] drivers:misc: Kconfig, Makefile for TI's ST ldisc

[Randy Dunlap <randy.dunlap@oracle.com>]

On 03/22/10 14:19, pavan_savoy@ti.com wrote:
> From: Pavan Savoy <pavan_savoy@ti.com>
> 
> This change adds the Kconfig and Make file for TI's
> ST line discipline driver and the BlueZ driver for BT
> core of the TI BT/FM/GPS combo chip.
> 
> Signed-off-by: Pavan Savoy <pavan_savoy@ti.com>
> ---
>  drivers/misc/Kconfig        |    1 +
>  drivers/misc/Makefile       |    1 +
>  drivers/misc/ti-st/Kconfig  |   24 ++++++++++++++++++++++++
>  drivers/misc/ti-st/Makefile |    7 +++++++
>  4 files changed, 33 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/misc/ti-st/Kconfig
>  create mode 100644 drivers/misc/ti-st/Makefile
> 
> diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> index 625e3a6..c059bca 100644
> --- a/drivers/misc/Kconfig
> +++ b/drivers/misc/Kconfig
> @@ -344,5 +344,6 @@ source "drivers/misc/c2port/Kconfig"
>  source "drivers/misc/eeprom/Kconfig"
>  source "drivers/misc/cb710/Kconfig"
>  source "drivers/misc/iwmc3200top/Kconfig"
> +source "drivers/misc/ti-st/Kconfig"
>  
>  endif # MISC_DEVICES
> diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> index c221917..021f282 100644
> --- a/drivers/misc/Makefile
> +++ b/drivers/misc/Makefile
> @@ -30,3 +30,4 @@ obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
>  obj-$(CONFIG_HWLAT_DETECTOR)	+= hwlat_detector.o
>  obj-y				+= eeprom/
>  obj-y				+= cb710/
> +obj-y				+= ti-st/
> diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
> new file mode 100644
> index 0000000..18eea1c
> --- /dev/null
> +++ b/drivers/misc/ti-st/Kconfig
> @@ -0,0 +1,24 @@
> +#
> +# TI's shared transport line discipline and the protocol
> +# drivers (BT, FM and GPS)
> +#
> +menu "Texas Instruments shared transport line discipline"
> +    config TI_ST
> +    tristate "shared transport core driver"
> +    select FW_LOADER
> +    help
> +        This enables the shared transport core driver for TI
> +	    BT / FM and GPS combo chips.This enables protocol drivers
> +	    to register themselves with core and send data, the responses
> +	    are returned to relevant protocol drivers based on their
> +	    packet types.

Please indent kconfig help text with one tab + 2 spaces.

> +
> +    config ST_BT
> +    tristate "BlueZ bluetooth driver for ST"

I'd be careful.  There are some places in the kernel tree where ST
means STMicroelectronics.

> +    select BT

That select looks unsafe.  You don't know that CONFIG_NET  is even enabled here,
do you?  Most drivers use "depends on BT" instead of "select BT" from my grepping.



> +    select TI_ST
> +    help
> +       This enables the Bluetooth driver for TI BT/FM/GPS combo devices

End sentence with period.

> +       This makes use of shared transport line discipline core driver to
> +       communicate with the BT core of the combo chip.
> +endmenu
> diff --git a/drivers/misc/ti-st/Makefile b/drivers/misc/ti-st/Makefile
> new file mode 100644
> index 0000000..cff3770
> --- /dev/null
> +++ b/drivers/misc/ti-st/Makefile
> @@ -0,0 +1,7 @@
> +#
> +# Makefile for TI's shared transport line discipline
> +# and it's protocol drivers (BT, FM, GPS)

         its

> +#
> +obj-$(CONFIG_TI_ST) += st_drv.o
> +st_drv-objs			:= st_core.o st_kim.o st_ll.o
> +obj-$(CONFIG_ST_BT) += bt_drv.o


-- 
~Randy