From: Hans de Goede <hdegoede@redhat.com>
To: Giel van Schijndel <me@mortis.eu>
Cc: Jean Delvare <khali@linux-fr.org>,
Jonathan Cameron <jic23@cam.ac.uk>,
Laurens Leemans <laurens@signips.com>,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support
Date: Wed, 24 Mar 2010 09:36:17 +0100 [thread overview]
Message-ID: <4BA9CF01.6010600@redhat.com> (raw)
In-Reply-To: <1269385936-3440-2-git-send-email-me@mortis.eu>
Correction, nack on this one see me reply to patch 4/4
Regards,
Hans
On 03/24/2010 12:12 AM, Giel van Schijndel wrote:
> Rename the `address' variable that's used in some places to hwmon_addr
> to indicate it refers to the hardware monitor (HWMON in datasheet)
> "logical device" of the chip.
>
> Signed-off-by: Giel van Schijndel<me@mortis.eu>
> ---
> drivers/hwmon/f71882fg.c | 24 ++++++++++++------------
> 1 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
> index b290b87..7b31e14 100644
> --- a/drivers/hwmon/f71882fg.c
> +++ b/drivers/hwmon/f71882fg.c
> @@ -2233,7 +2233,7 @@ static int f71882fg_remove(struct platform_device *pdev)
> return 0;
> }
>
> -static int __init f71882fg_find(int sioaddr, unsigned short *address,
> +static int __init f71882fg_find(int sioaddr, unsigned short *hwmon_addr,
> struct f71882fg_sio_data *sio_data)
> {
> int err = -ENODEV;
> @@ -2290,16 +2290,16 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
> goto exit;
> }
>
> - *address = superio_inw(sioaddr, SIO_REG_ADDR);
> - if (*address == 0) {
> + *hwmon_addr = superio_inw(sioaddr, SIO_REG_ADDR);
> + if (*hwmon_addr == 0) {
> printk(KERN_WARNING DRVNAME ": Base address not set\n");
> goto exit;
> }
> - *address&= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
> + *hwmon_addr&= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
>
> err = 0;
> printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %d\n",
> - f71882fg_names[sio_data->type], (unsigned int)*address,
> + f71882fg_names[sio_data->type], (unsigned int)*hwmon_addr,
> (int)superio_inb(sioaddr, SIO_REG_DEVREV));
> exit:
> superio_exit(sioaddr);
> @@ -2307,17 +2307,17 @@ exit:
> return err;
> }
>
> -static int __init f71882fg_device_add(unsigned short address,
> +static int __init f71882fg_device_add(unsigned short hwmon_addr,
> const struct f71882fg_sio_data *sio_data)
> {
> struct resource res = {
> - .start = address,
> - .end = address + REGION_LENGTH - 1,
> + .start = hwmon_addr,
> + .end = hwmon_addr + REGION_LENGTH - 1,
> .flags = IORESOURCE_IO,
> };
> int err;
>
> - f71882fg_pdev = platform_device_alloc(DRVNAME, address);
> + f71882fg_pdev = platform_device_alloc(DRVNAME, hwmon_addr);
> if (!f71882fg_pdev)
> return -ENOMEM;
>
> @@ -2357,14 +2357,14 @@ static int __init f71882fg_init(void)
> {
> static const unsigned short addrs[] = { 0x2e, 0x4e };
> int err = -ENODEV;
> - unsigned short address = /* shut up compiler */ 0;
> + unsigned short hwmon_addr = /* shut up compiler */ 0;
> struct f71882fg_sio_data sio_data;
> int i;
>
> memset(&sio_data, 0, sizeof(sio_data));
>
> for (i = 0; i< ARRAY_SIZE(addrs); i++) {
> - err = f71882fg_find(addrs[i],&address,&sio_data);
> + err = f71882fg_find(addrs[i],&hwmon_addr,&sio_data);
> if (err == 0)
> break;
> }
> @@ -2375,7 +2375,7 @@ static int __init f71882fg_init(void)
> if (err)
> goto exit;
>
> - err = f71882fg_device_add(address,&sio_data);
> + err = f71882fg_device_add(hwmon_addr,&sio_data);
> if (err)
> goto exit_driver;
>
next prev parent reply other threads:[~2010-03-24 8:35 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-23 14:12 [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Giel van Schijndel
2010-03-23 14:17 ` Giel van Schijndel
2010-03-23 23:12 ` [PATCH 1/4] [RFC] hwmon: f71882fg: Add support for the Fintek F71808E Giel van Schijndel
2010-03-23 23:12 ` [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support Giel van Schijndel
2010-03-23 23:12 ` [PATCH 3/4] hwmon: f71882fg: add watchdog detection code Giel van Schijndel
2010-03-23 23:12 ` [PATCH 4/4] [RFC] hwmon: f71882fg: Add watchdog API for F71808E and F71889 Giel van Schijndel
2010-03-23 23:26 ` Giel van Schijndel
2010-03-24 8:37 ` Hans de Goede
2010-03-24 9:36 ` Giel van Schijndel
2010-03-24 10:33 ` Hans de Goede
2010-03-24 15:35 ` Giel van Schijndel
2010-03-24 15:51 ` Alan Cox
2010-03-24 16:20 ` Hans de Goede
2010-03-24 20:35 ` Giel van Schijndel
2010-04-25 21:20 ` [lm-sensors] " Jim Cromie
2010-03-25 8:54 ` Giel van Schijndel
2010-03-25 10:40 ` Giel van Schijndel
2010-03-25 12:50 ` Alan Cox
2010-03-25 13:06 ` Hans de Goede
2010-03-25 13:17 ` [PATCH 1/3] resource: shared I/O region support Giel van Schijndel
2010-03-25 13:17 ` [PATCH 2/3] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-03-25 13:17 ` [PATCH 3/3] [RFC] watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E Giel van Schijndel
2010-03-30 9:06 ` Giel van Schijndel
2010-05-20 7:52 ` Wim Van Sebroeck
2010-05-25 21:08 ` Giel van Schijndel
2010-05-26 7:38 ` Wim Van Sebroeck
2010-07-31 21:36 ` Giel van Schijndel
2010-03-25 21:10 ` [PATCH 2/3] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Hans de Goede
2010-04-25 10:35 ` Giel van Schijndel
2010-07-31 21:21 ` Giel van Schijndel
2010-03-25 15:57 ` [PATCH 1/3] resource: shared I/O region support Alan Cox
2010-03-25 18:03 ` Giel van Schijndel
2010-03-25 18:16 ` Alan Cox
2010-03-29 8:18 ` Giel van Schijndel
2010-03-29 16:07 ` Jesse Barnes
2010-03-29 17:38 ` Giel van Schijndel
2010-03-29 17:44 ` Giel van Schijndel
2010-03-29 17:45 ` H. Peter Anvin
2010-03-29 18:06 ` Jesse Barnes
2010-03-29 18:17 ` H. Peter Anvin
2010-03-29 18:29 ` Alan Cox
2010-04-02 20:29 ` Jesse Barnes
2010-03-29 18:39 ` Alan Cox
2010-03-29 18:56 ` H. Peter Anvin
2010-03-29 17:59 ` Jesse Barnes
2010-03-29 17:59 ` Jesse Barnes
2010-03-24 8:26 ` [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support Hans de Goede
2010-03-24 8:36 ` Hans de Goede [this message]
2010-03-24 8:25 ` [PATCH 1/4] [RFC] hwmon: f71882fg: Add support for the Fintek F71808E Hans de Goede
2010-03-24 9:23 ` [PATCH 1/4] " Giel van Schijndel
2010-03-24 10:31 ` Hans de Goede
2010-07-31 23:31 ` Giel van Schijndel
2010-08-01 6:12 ` Hans de Goede
2010-08-01 13:22 ` Giel van Schijndel
2010-08-01 13:30 ` [PATCH] " Giel van Schijndel
2010-08-04 11:36 ` Hans de Goede
2010-08-04 15:44 ` Giel van Schijndel
2010-08-13 10:56 ` Hans de Goede
2010-08-10 19:11 ` Giel van Schijndel
2010-08-13 10:01 ` Hans de Goede
2010-08-18 18:24 ` Andrew Morton
2010-08-22 18:04 ` Hans de Goede
2010-08-22 18:28 ` Giel van Schijndel
2010-08-01 13:30 ` [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-08-01 13:30 ` [PATCH 2/2] watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG Giel van Schijndel
2010-08-04 11:38 ` [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Hans de Goede
2010-10-02 22:59 ` Giel van Schijndel
2010-10-03 1:06 ` Guenter Roeck
2010-10-03 9:01 ` Jean Delvare
2010-10-03 12:09 ` [PATCH] " Giel van Schijndel
2010-10-03 13:31 ` Guenter Roeck
2010-03-23 23:01 ` [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Giel van Schijndel
2010-03-24 8:14 ` Hans de Goede
2010-03-24 8:46 ` Giel van Schijndel
2010-03-24 9:09 ` [PATCH] hwmon: f71882fg: code cleanup Giel van Schijndel
2010-03-24 12:54 ` Jean Delvare
2010-03-24 9:09 ` [PATCH] hwmon: f71882fg: acquire I/O regions while we're working with them Giel van Schijndel
2010-03-24 9:28 ` [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Jean Delvare
2010-03-24 9:29 ` Jean Delvare
2010-03-24 9:34 ` Giel van Schijndel
2010-03-24 12:54 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BA9CF01.6010600@redhat.com \
--to=hdegoede@redhat.com \
--cc=jic23@cam.ac.uk \
--cc=khali@linux-fr.org \
--cc=laurens@signips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=me@mortis.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).