From: Hans de Goede <hdegoede@redhat.com>
To: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Giel van Schijndel <me@mortis.eu>,
Jean Delvare <khali@linux-fr.org>,
Jonathan Cameron <jic23@cam.ac.uk>,
Laurens Leemans <laurens@signips.com>,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 4/4] [RFC] hwmon: f71882fg: Add watchdog API for F71808E and F71889
Date: Thu, 25 Mar 2010 14:06:57 +0100 [thread overview]
Message-ID: <4BAB5FF1.7060106@redhat.com> (raw)
In-Reply-To: <20100325125005.6d58cfaf@lxorguk.ukuu.org.uk>
Hi Giel,
On 03/25/2010 01:50 PM, Alan Cox wrote:
> O> Using Alan's patch and the one following the dashed line I can implement
>> (and have already done so) a separate watchdog driver for the Fintek
>> F71808E.
>>
>> Should I just ask for this patch to be applied together with Alan's?
>> Then submit the new driver? (I'm a bit new to the non-technical aspects
>> of Linux kernel development).
>
> I'd expect to see a submission of three patches I think
>
> 1. Patch adding the muxed resource support
> 2. Patch making the hwmon driver use it
> 3. Patch adding the new driver which needs it
>
> and then we have a few other bits of code that probably should adopt it,
> but that is a separate matter and other maintainers can do that bit.
>
What Alan said :)
Although I'm not sure what the proper place is to post this entire set,
I guess linux-kernel itself, with lm_sensors in the CC.
Regards,
Hans
next prev parent reply other threads:[~2010-03-25 13:06 UTC|newest]
Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-03-23 14:12 [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Giel van Schijndel
2010-03-23 14:17 ` Giel van Schijndel
2010-03-23 23:12 ` [PATCH 1/4] [RFC] hwmon: f71882fg: Add support for the Fintek F71808E Giel van Schijndel
2010-03-23 23:12 ` [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support Giel van Schijndel
2010-03-23 23:12 ` [PATCH 3/4] hwmon: f71882fg: add watchdog detection code Giel van Schijndel
2010-03-23 23:12 ` [PATCH 4/4] [RFC] hwmon: f71882fg: Add watchdog API for F71808E and F71889 Giel van Schijndel
2010-03-23 23:26 ` Giel van Schijndel
2010-03-24 8:37 ` Hans de Goede
2010-03-24 9:36 ` Giel van Schijndel
2010-03-24 10:33 ` Hans de Goede
2010-03-24 15:35 ` Giel van Schijndel
2010-03-24 15:51 ` Alan Cox
2010-03-24 16:20 ` Hans de Goede
2010-03-24 20:35 ` Giel van Schijndel
2010-04-25 21:20 ` [lm-sensors] " Jim Cromie
2010-03-25 8:54 ` Giel van Schijndel
2010-03-25 10:40 ` Giel van Schijndel
2010-03-25 12:50 ` Alan Cox
2010-03-25 13:06 ` Hans de Goede [this message]
2010-03-25 13:17 ` [PATCH 1/3] resource: shared I/O region support Giel van Schijndel
2010-03-25 13:17 ` [PATCH 2/3] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-03-25 13:17 ` [PATCH 3/3] [RFC] watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E Giel van Schijndel
2010-03-30 9:06 ` Giel van Schijndel
2010-05-20 7:52 ` Wim Van Sebroeck
2010-05-25 21:08 ` Giel van Schijndel
2010-05-26 7:38 ` Wim Van Sebroeck
2010-07-31 21:36 ` Giel van Schijndel
2010-03-25 21:10 ` [PATCH 2/3] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Hans de Goede
2010-04-25 10:35 ` Giel van Schijndel
2010-07-31 21:21 ` Giel van Schijndel
2010-03-25 15:57 ` [PATCH 1/3] resource: shared I/O region support Alan Cox
2010-03-25 18:03 ` Giel van Schijndel
2010-03-25 18:16 ` Alan Cox
2010-03-29 8:18 ` Giel van Schijndel
2010-03-29 16:07 ` Jesse Barnes
2010-03-29 17:38 ` Giel van Schijndel
2010-03-29 17:44 ` Giel van Schijndel
2010-03-29 17:45 ` H. Peter Anvin
2010-03-29 18:06 ` Jesse Barnes
2010-03-29 18:17 ` H. Peter Anvin
2010-03-29 18:29 ` Alan Cox
2010-04-02 20:29 ` Jesse Barnes
2010-03-29 18:39 ` Alan Cox
2010-03-29 18:56 ` H. Peter Anvin
2010-03-29 17:59 ` Jesse Barnes
2010-03-29 17:59 ` Jesse Barnes
2010-03-24 8:26 ` [PATCH 2/4] hwmon: f71882fg: prepare for addition of watchdog support Hans de Goede
2010-03-24 8:36 ` Hans de Goede
2010-03-24 8:25 ` [PATCH 1/4] [RFC] hwmon: f71882fg: Add support for the Fintek F71808E Hans de Goede
2010-03-24 9:23 ` [PATCH 1/4] " Giel van Schijndel
2010-03-24 10:31 ` Hans de Goede
2010-07-31 23:31 ` Giel van Schijndel
2010-08-01 6:12 ` Hans de Goede
2010-08-01 13:22 ` Giel van Schijndel
2010-08-01 13:30 ` [PATCH] " Giel van Schijndel
2010-08-04 11:36 ` Hans de Goede
2010-08-04 15:44 ` Giel van Schijndel
2010-08-13 10:56 ` Hans de Goede
2010-08-10 19:11 ` Giel van Schijndel
2010-08-13 10:01 ` Hans de Goede
2010-08-18 18:24 ` Andrew Morton
2010-08-22 18:04 ` Hans de Goede
2010-08-22 18:28 ` Giel van Schijndel
2010-08-01 13:30 ` [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Giel van Schijndel
2010-08-01 13:30 ` [PATCH 2/2] watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG Giel van Schijndel
2010-08-04 11:38 ` [PATCH 1/2] hwmon: f71882fg: use a muxed resource lock for the Super I/O port Hans de Goede
2010-10-02 22:59 ` Giel van Schijndel
2010-10-03 1:06 ` Guenter Roeck
2010-10-03 9:01 ` Jean Delvare
2010-10-03 12:09 ` [PATCH] " Giel van Schijndel
2010-10-03 13:31 ` Guenter Roeck
2010-03-23 23:01 ` [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Giel van Schijndel
2010-03-24 8:14 ` Hans de Goede
2010-03-24 8:46 ` Giel van Schijndel
2010-03-24 9:09 ` [PATCH] hwmon: f71882fg: code cleanup Giel van Schijndel
2010-03-24 12:54 ` Jean Delvare
2010-03-24 9:09 ` [PATCH] hwmon: f71882fg: acquire I/O regions while we're working with them Giel van Schijndel
2010-03-24 9:28 ` [PATCH] hwmon: f71882fg: properly acquire I/O regions while probing Jean Delvare
2010-03-24 9:29 ` Jean Delvare
2010-03-24 9:34 ` Giel van Schijndel
2010-03-24 12:54 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BAB5FF1.7060106@redhat.com \
--to=hdegoede@redhat.com \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=jic23@cam.ac.uk \
--cc=khali@linux-fr.org \
--cc=laurens@signips.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=me@mortis.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).