* Re: [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 to fix bug 14429
@ 2010-04-12 13:05 Henrik Rydberg
0 siblings, 0 replies; 5+ messages in thread
From: Henrik Rydberg @ 2010-04-12 13:05 UTC (permalink / raw)
To: linux-kernel@vger.kernel.org
I don't mind picking up maintenance of applesmc, I have practically been doing
it anyways for the last year or so.
Henrik
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH]BUG FIX: hwmon applesmc.c add iMac9,1 and MacBookPro2,2 to fix bug 14429
@ 2010-04-11 21:43 Justin P. Mattock
2010-04-12 7:45 ` [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 " Jean Delvare
0 siblings, 1 reply; 5+ messages in thread
From: Justin P. Mattock @ 2010-04-11 21:43 UTC (permalink / raw)
To: linux-kernel; +Cc: lm-sensors, Justin P. Mattock
This patch adds the iMac9,1 and the MacBookPro2,2
temperature sensors to hwmon applesmc.c to fix bug entry:
https://bugzilla.kernel.org/show_bug.cgi?id=14429
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
---
drivers/hwmon/applesmc.c | 18 ++++++++++++++++++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index c1605b5..5e762ac 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -142,6 +142,12 @@ static const char *temperature_sensors_sets[][41] = {
"TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
"TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
NULL },
+/* Set 17: iMac9,1 */
+ { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TH0P", "TL0P",
+ "TN0D", "TN0H", "TN0P", "TO0P", "Tm0P", "Tp0P", NULL },
+/* Set 18: MacBookPro2,2 */
+ { "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
+ "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
};
/* List of keys used to read/write fan speeds */
@@ -1350,6 +1356,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
{ .accelerometer = 1, .light = 1, .temperature_set = 15 },
/* MacPro3,1: temperature set 16 */
{ .accelerometer = 0, .light = 0, .temperature_set = 16 },
+/* iMac9,1: light sensor only, temperature set 17 */
+ { .accelerometer = 0, .light = 0, .temperature_set = 17 },
+/* MacBookPro2,2: accelerometer, backlight and temperature set 18 */
+ { .accelerometer = 1, .light = 1, .temperature_set = 18 },
};
/* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
@@ -1375,6 +1385,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
&applesmc_dmi_data[9]},
+ { applesmc_dmi_match, "Apple MacBookPro2,2", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
+ &applesmc_dmi_data[18]},
{ applesmc_dmi_match, "Apple MacBook Pro", {
DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
@@ -1415,6 +1429,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
&applesmc_dmi_data[4]},
+ { applesmc_dmi_match, "Apple iMac9,1", {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
+ &applesmc_dmi_data[17]},
{ applesmc_dmi_match, "Apple iMac 8", {
DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
--
1.6.5.GIT
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 to fix bug 14429
2010-04-11 21:43 [PATCH]BUG FIX: hwmon applesmc.c add iMac9,1 and MacBookPro2,2 " Justin P. Mattock
@ 2010-04-12 7:45 ` Jean Delvare
2010-04-12 12:37 ` Nicolas Boichat
2010-04-12 13:26 ` Justin P. mattock
0 siblings, 2 replies; 5+ messages in thread
From: Jean Delvare @ 2010-04-12 7:45 UTC (permalink / raw)
To: Justin P. Mattock; +Cc: linux-kernel, Nicolas Boichat, lm-sensors
Hi Justin,
On Sun, 11 Apr 2010 14:43:22 -0700, Justin P. Mattock wrote:
> This patch adds the iMac9,1 and the MacBookPro2,2
> temperature sensors to hwmon applesmc.c to fix bug entry:
> https://bugzilla.kernel.org/show_bug.cgi?id=14429
Nicely filled under component IA64, no surprise I didn't see it. I've
just fixed it.
> Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
> ---
> drivers/hwmon/applesmc.c | 18 ++++++++++++++++++
> 1 files changed, 18 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
> index c1605b5..5e762ac 100644
> --- a/drivers/hwmon/applesmc.c
> +++ b/drivers/hwmon/applesmc.c
> @@ -142,6 +142,12 @@ static const char *temperature_sensors_sets[][41] = {
> "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
> "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
> NULL },
> +/* Set 17: iMac9,1 */
> + { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TH0P", "TL0P",
> + "TN0D", "TN0H", "TN0P", "TO0P", "Tm0P", "Tp0P", NULL },
> +/* Set 18: MacBookPro2,2 */
> + { "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
> + "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
> };
>
> /* List of keys used to read/write fan speeds */
> @@ -1350,6 +1356,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
> { .accelerometer = 1, .light = 1, .temperature_set = 15 },
> /* MacPro3,1: temperature set 16 */
> { .accelerometer = 0, .light = 0, .temperature_set = 16 },
> +/* iMac9,1: light sensor only, temperature set 17 */
> + { .accelerometer = 0, .light = 0, .temperature_set = 17 },
> +/* MacBookPro2,2: accelerometer, backlight and temperature set 18 */
> + { .accelerometer = 1, .light = 1, .temperature_set = 18 },
> };
>
> /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
> @@ -1375,6 +1385,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
> &applesmc_dmi_data[9]},
> + { applesmc_dmi_match, "Apple MacBookPro2,2", {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
> + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
> + &applesmc_dmi_data[18]},
> { applesmc_dmi_match, "Apple MacBook Pro", {
> DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
> @@ -1415,6 +1429,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
> &applesmc_dmi_data[4]},
> + { applesmc_dmi_match, "Apple iMac9,1", {
> + DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
> + DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
> + &applesmc_dmi_data[17]},
> { applesmc_dmi_match, "Apple iMac 8", {
> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
Patch applied, queued for 2.6.34, thanks.
Nicolas, as the maintainer of this driver, I would like to get your
ack, at least.
--
Jean Delvare
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 to fix bug 14429
2010-04-12 7:45 ` [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 " Jean Delvare
@ 2010-04-12 12:37 ` Nicolas Boichat
2010-04-12 12:56 ` Jean Delvare
2010-04-12 13:26 ` Justin P. mattock
1 sibling, 1 reply; 5+ messages in thread
From: Nicolas Boichat @ 2010-04-12 12:37 UTC (permalink / raw)
To: Jean Delvare; +Cc: Justin P. Mattock, linux-kernel, lm-sensors
Hi Jean,
On 04/12/2010 03:45 PM, Jean Delvare wrote:
> Hi Justin,
>
> On Sun, 11 Apr 2010 14:43:22 -0700, Justin P. Mattock wrote:
>> This patch adds the iMac9,1 and the MacBookPro2,2
>> temperature sensors to hwmon applesmc.c to fix bug entry:
>> https://bugzilla.kernel.org/show_bug.cgi?id=14429
>
> Nicely filled under component IA64, no surprise I didn't see it. I've
> just fixed it.
>
>> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
>> ---
>> drivers/hwmon/applesmc.c | 18 ++++++++++++++++++
>> 1 files changed, 18 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
>> index c1605b5..5e762ac 100644
>> --- a/drivers/hwmon/applesmc.c
>> +++ b/drivers/hwmon/applesmc.c
>> @@ -142,6 +142,12 @@ static const char *temperature_sensors_sets[][41] = {
>> "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
>> "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
>> NULL },
>> +/* Set 17: iMac9,1 */
>> + { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TH0P", "TL0P",
>> + "TN0D", "TN0H", "TN0P", "TO0P", "Tm0P", "Tp0P", NULL },
>> +/* Set 18: MacBookPro2,2 */
>> + { "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
>> + "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
>> };
>>
>> /* List of keys used to read/write fan speeds */
>> @@ -1350,6 +1356,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
>> { .accelerometer = 1, .light = 1, .temperature_set = 15 },
>> /* MacPro3,1: temperature set 16 */
>> { .accelerometer = 0, .light = 0, .temperature_set = 16 },
>> +/* iMac9,1: light sensor only, temperature set 17 */
>> + { .accelerometer = 0, .light = 0, .temperature_set = 17 },
>> +/* MacBookPro2,2: accelerometer, backlight and temperature set 18 */
>> + { .accelerometer = 1, .light = 1, .temperature_set = 18 },
>> };
>>
>> /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
>> @@ -1375,6 +1385,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
>> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
>> DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
>> &applesmc_dmi_data[9]},
>> + { applesmc_dmi_match, "Apple MacBookPro2,2", {
I would put spaces in the name, to be consistent with the rest of the
list, that is: "Apple MacBook Pro 2,2".
>> + DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
>> + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
>> + &applesmc_dmi_data[18]},
>> { applesmc_dmi_match, "Apple MacBook Pro", {
>> DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
>> DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
>> @@ -1415,6 +1429,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
>> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
>> DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
>> &applesmc_dmi_data[4]},
>> + { applesmc_dmi_match, "Apple iMac9,1", {
Same here: "Apple iMac 9,1".
>> + DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
>> + DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
>> + &applesmc_dmi_data[17]},
>> { applesmc_dmi_match, "Apple iMac 8", {
>> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
>> DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
>
> Patch applied, queued for 2.6.34, thanks.
>
> Nicolas, as the maintainer of this driver, I would like to get your
> ack, at least.
Apart from that, it looks fine to me, I haven't compiled nor tested it
though (I don't own any Apple hardware anymore, maybe I should remove
myself from the maintainer list...).
Acked-by: Nicolas Boichat <nicolas@boichat.ch>
Regards,
Nicolas
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 to fix bug 14429
2010-04-12 12:37 ` Nicolas Boichat
@ 2010-04-12 12:56 ` Jean Delvare
0 siblings, 0 replies; 5+ messages in thread
From: Jean Delvare @ 2010-04-12 12:56 UTC (permalink / raw)
To: Nicolas Boichat; +Cc: Justin P. Mattock, linux-kernel, lm-sensors
On Mon, 12 Apr 2010 20:37:59 +0800, Nicolas Boichat wrote:
> Hi Jean,
>
> On 04/12/2010 03:45 PM, Jean Delvare wrote:
> > Hi Justin,
> >
> > On Sun, 11 Apr 2010 14:43:22 -0700, Justin P. Mattock wrote:
> >> This patch adds the iMac9,1 and the MacBookPro2,2
> >> temperature sensors to hwmon applesmc.c to fix bug entry:
> >> https://bugzilla.kernel.org/show_bug.cgi?id=14429
> >
> > Nicely filled under component IA64, no surprise I didn't see it. I've
> > just fixed it.
> >
> >> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
> >> ---
> >> drivers/hwmon/applesmc.c | 18 ++++++++++++++++++
> >> 1 files changed, 18 insertions(+), 0 deletions(-)
> >>
> >> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
> >> index c1605b5..5e762ac 100644
> >> --- a/drivers/hwmon/applesmc.c
> >> +++ b/drivers/hwmon/applesmc.c
> >> @@ -142,6 +142,12 @@ static const char *temperature_sensors_sets[][41] = {
> >> "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
> >> "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
> >> NULL },
> >> +/* Set 17: iMac9,1 */
> >> + { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TH0P", "TL0P",
> >> + "TN0D", "TN0H", "TN0P", "TO0P", "Tm0P", "Tp0P", NULL },
> >> +/* Set 18: MacBookPro2,2 */
> >> + { "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
> >> + "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
> >> };
> >>
> >> /* List of keys used to read/write fan speeds */
> >> @@ -1350,6 +1356,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
> >> { .accelerometer = 1, .light = 1, .temperature_set = 15 },
> >> /* MacPro3,1: temperature set 16 */
> >> { .accelerometer = 0, .light = 0, .temperature_set = 16 },
> >> +/* iMac9,1: light sensor only, temperature set 17 */
> >> + { .accelerometer = 0, .light = 0, .temperature_set = 17 },
> >> +/* MacBookPro2,2: accelerometer, backlight and temperature set 18 */
> >> + { .accelerometer = 1, .light = 1, .temperature_set = 18 },
> >> };
> >>
> >> /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
> >> @@ -1375,6 +1385,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
> >> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> >> DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
> >> &applesmc_dmi_data[9]},
> >> + { applesmc_dmi_match, "Apple MacBookPro2,2", {
>
> I would put spaces in the name, to be consistent with the rest of the
> list, that is: "Apple MacBook Pro 2,2".
>
> >> + DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
> >> + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
> >> + &applesmc_dmi_data[18]},
> >> { applesmc_dmi_match, "Apple MacBook Pro", {
> >> DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
> >> DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
> >> @@ -1415,6 +1429,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
> >> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> >> DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
> >> &applesmc_dmi_data[4]},
> >> + { applesmc_dmi_match, "Apple iMac9,1", {
>
> Same here: "Apple iMac 9,1".
Both updated, thanks.
> >> + DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
> >> + DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
> >> + &applesmc_dmi_data[17]},
> >> { applesmc_dmi_match, "Apple iMac 8", {
> >> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
> >> DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
> >
> > Patch applied, queued for 2.6.34, thanks.
> >
> > Nicolas, as the maintainer of this driver, I would like to get your
> > ack, at least.
>
> Apart from that, it looks fine to me, I haven't compiled nor tested it
> though (I don't own any Apple hardware anymore, maybe I should remove
> myself from the maintainer list...).
Please do if you have lost interest. No maintainer is better than an
unresponsive/uninterested maintainer.
> Acked-by: Nicolas Boichat <nicolas@boichat.ch>
Thanks.
--
Jean Delvare
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 to fix bug 14429
2010-04-12 7:45 ` [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 " Jean Delvare
2010-04-12 12:37 ` Nicolas Boichat
@ 2010-04-12 13:26 ` Justin P. mattock
1 sibling, 0 replies; 5+ messages in thread
From: Justin P. mattock @ 2010-04-12 13:26 UTC (permalink / raw)
To: Jean Delvare; +Cc: linux-kernel, Nicolas Boichat, lm-sensors
On 04/12/2010 12:45 AM, Jean Delvare wrote:
> Hi Justin,
>
> On Sun, 11 Apr 2010 14:43:22 -0700, Justin P. Mattock wrote:
>> This patch adds the iMac9,1 and the MacBookPro2,2
>> temperature sensors to hwmon applesmc.c to fix bug entry:
>> https://bugzilla.kernel.org/show_bug.cgi?id=14429
>
> Nicely filled under component IA64, no surprise I didn't see it. I've
> just fixed it.
>
>> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
>> ---
>> drivers/hwmon/applesmc.c | 18 ++++++++++++++++++
>> 1 files changed, 18 insertions(+), 0 deletions(-)
>>
>> diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
>> index c1605b5..5e762ac 100644
>> --- a/drivers/hwmon/applesmc.c
>> +++ b/drivers/hwmon/applesmc.c
>> @@ -142,6 +142,12 @@ static const char *temperature_sensors_sets[][41] = {
>> "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S",
>> "TN0C", "TN0D", "TN0H", "TS0C", "Tp0C", "Tp1C", "Tv0S", "Tv1S",
>> NULL },
>> +/* Set 17: iMac9,1 */
>> + { "TA0P", "TC0D", "TC0H", "TC0P", "TG0D", "TG0H", "TH0P", "TL0P",
>> + "TN0D", "TN0H", "TN0P", "TO0P", "Tm0P", "Tp0P", NULL },
>> +/* Set 18: MacBookPro2,2 */
>> + { "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "TM0P", "TTF0",
>> + "Th0H", "Th1H", "Tm0P", "Ts0P", NULL },
>> };
>>
>> /* List of keys used to read/write fan speeds */
>> @@ -1350,6 +1356,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = {
>> { .accelerometer = 1, .light = 1, .temperature_set = 15 },
>> /* MacPro3,1: temperature set 16 */
>> { .accelerometer = 0, .light = 0, .temperature_set = 16 },
>> +/* iMac9,1: light sensor only, temperature set 17 */
>> + { .accelerometer = 0, .light = 0, .temperature_set = 17 },
>> +/* MacBookPro2,2: accelerometer, backlight and temperature set 18 */
>> + { .accelerometer = 1, .light = 1, .temperature_set = 18 },
>> };
>>
>> /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1".
>> @@ -1375,6 +1385,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
>> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
>> DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro3") },
>> &applesmc_dmi_data[9]},
>> + { applesmc_dmi_match, "Apple MacBookPro2,2", {
>> + DMI_MATCH(DMI_BOARD_VENDOR, "Apple Computer, Inc."),
>> + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro2,2") },
>> + &applesmc_dmi_data[18]},
>> { applesmc_dmi_match, "Apple MacBook Pro", {
>> DMI_MATCH(DMI_BOARD_VENDOR,"Apple"),
>> DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") },
>> @@ -1415,6 +1429,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = {
>> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
>> DMI_MATCH(DMI_PRODUCT_NAME, "MacPro") },
>> &applesmc_dmi_data[4]},
>> + { applesmc_dmi_match, "Apple iMac9,1", {
>> + DMI_MATCH(DMI_BOARD_VENDOR, "Apple Inc."),
>> + DMI_MATCH(DMI_PRODUCT_NAME, "iMac9,1") },
>> + &applesmc_dmi_data[17]},
>> { applesmc_dmi_match, "Apple iMac 8", {
>> DMI_MATCH(DMI_BOARD_VENDOR, "Apple"),
>> DMI_MATCH(DMI_PRODUCT_NAME, "iMac8") },
>
> Patch applied, queued for 2.6.34, thanks.
>
> Nicolas, as the maintainer of this driver, I would like to get your
> ack, at least.
>
Cool!!, thank you for taking the
time to review.
as for the patch, just to let you know the
differences between the two(the patch submitted
yesterday, and on the bug report)
is the iMac9,1 wasn't sure if I should
use 9,1 or not i.g. iMac 8,
either case both patches work.
Justin P. Mattock
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2010-04-12 13:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-04-12 13:05 [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 to fix bug 14429 Henrik Rydberg
-- strict thread matches above, loose matches on Subject: below --
2010-04-11 21:43 [PATCH]BUG FIX: hwmon applesmc.c add iMac9,1 and MacBookPro2,2 " Justin P. Mattock
2010-04-12 7:45 ` [lm-sensors] [PATCH]BUG FIX: hwmon applesmc.c add iMac9, 1 and MacBookPro2, 2 " Jean Delvare
2010-04-12 12:37 ` Nicolas Boichat
2010-04-12 12:56 ` Jean Delvare
2010-04-12 13:26 ` Justin P. mattock
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox