Re: [PATCH -v3 1/3] x86: Reserve [0xa0000, 0x100000] in e820 map

["H. Peter Anvin" <hpa@zytor.com>]

Hi Jesse,

I am considering putting this patch plus the two followup patches in my
next set of fixes to Linus.  However, the two followup patches are
really more PCI-related than x86-related, so I would appreciate your OK.

I'm using this version (-v3) because the latter cleanup (removing
probe_rom_32.c for example) do not seem to be .34 material.

For the followup patches:

http://marc.info/?i=4BC4E0E9.7000203@oracle.com
http://marc.info/?i=4BC4E115.90805@oracle.com

	-hpa

On 04/13/2010 02:22 PM, Yinghai wrote:
> 
> 
> Update e820 at first, and later put them resource tree.
> 
> Reserved that early, will not be allocated to unassigned PCI BAR
> 
> Signed-off-by: Yinghai Lu <yinghai@kernel.org>
> Cc: Guenter Roeck <guenter.roeck@ericsson.com>
> Cc: Andy Isaacson <adi@hexapodia.org>
> Tested-by: Andy Isaacson <adi@hexapodia.org>
> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
> Acked-by: H. Peter Anvin <hpa@zytor.com>
> 
> ---
>  arch/x86/include/asm/setup.h |    1 -
>  arch/x86/kernel/head32.c     |    1 -
>  arch/x86/kernel/setup.c      |   19 +------------------
>  3 files changed, 1 insertion(+), 20 deletions(-)
> 
> Index: linux-2.6/arch/x86/include/asm/setup.h
> ===================================================================
> --- linux-2.6.orig/arch/x86/include/asm/setup.h
> +++ linux-2.6/arch/x86/include/asm/setup.h
> @@ -44,7 +44,6 @@ static inline void visws_early_detect(vo
>  extern unsigned long saved_video_mode;
>  
>  extern void reserve_standard_io_resources(void);
> -extern void i386_reserve_resources(void);
>  extern void setup_default_timer_irq(void);
>  
>  #ifdef CONFIG_X86_MRST
> Index: linux-2.6/arch/x86/kernel/head32.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/head32.c
> +++ linux-2.6/arch/x86/kernel/head32.c
> @@ -22,7 +22,6 @@ static void __init i386_default_early_se
>  {
>  	/* Initilize 32bit specific setup functions */
>  	x86_init.resources.probe_roms = probe_roms;
> -	x86_init.resources.reserve_resources = i386_reserve_resources;
>  	x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
>  
>  	reserve_ebda_region();
> Index: linux-2.6/arch/x86/kernel/setup.c
> ===================================================================
> --- linux-2.6.orig/arch/x86/kernel/setup.c
> +++ linux-2.6/arch/x86/kernel/setup.c
> @@ -693,7 +693,7 @@ static void __init trim_bios_range(void)
>  	 * area (640->1Mb) as ram even though it is not.
>  	 * take them out.
>  	 */
> -	e820_remove_range(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RAM, 1);
> +	e820_add_region(BIOS_BEGIN, BIOS_END - BIOS_BEGIN, E820_RESERVED);
>  	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
>  }
>  
> @@ -1052,20 +1052,3 @@ void __init setup_arch(char **cmdline_p)
>  
>  	mcheck_init();
>  }
> -
> -#ifdef CONFIG_X86_32
> -
> -static struct resource video_ram_resource = {
> -	.name	= "Video RAM area",
> -	.start	= 0xa0000,
> -	.end	= 0xbffff,
> -	.flags	= IORESOURCE_BUSY | IORESOURCE_MEM
> -};
> -
> -void __init i386_reserve_resources(void)
> -{
> -	request_resource(&iomem_resource, &video_ram_resource);
> -	reserve_standard_io_resources();
> -}
> -
> -#endif /* CONFIG_X86_32 */