From: Yinghai <yinghai.lu@oracle.com>
To: Jesse Barnes <jbarnes@virtuousgeek.org>,
"H. Peter Anvin" <hpa@zytor.com>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>,
Andy Isaacson <adi@hexapodia.org>,
"R. Andrew Bailey" <bailey@akamai.com>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>,
guenter.roeck@ericsson.com,
Linus Torvalds <torvalds@linux-foundation.org>,
"linux-pci@vger.kernel.org" <linux-pci@vger.kernel.org>,
"x86@kernel.org" <x86@kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Thomas Renninger <trenn@suse.de>,
yaneti@declera.com
Subject: [PATCH -v5 2/3] x86: Remove probe_roms for 32bit
Date: Mon, 26 Apr 2010 15:04:50 -0700 [thread overview]
Message-ID: <4BD60E02.6090708@oracle.com> (raw)
In-Reply-To: <4BD60CD4.9020708@oracle.com>
That is not needed, because whole range is reserved already
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
---
arch/x86/include/asm/setup.h | 2
arch/x86/include/asm/x86_init.h | 4
arch/x86/kernel/Makefile | 1
arch/x86/kernel/head32.c | 1
arch/x86/kernel/mrst.c | 2
arch/x86/kernel/probe_roms_32.c | 166 ----------------------------------------
arch/x86/kernel/setup.c | 6 -
arch/x86/kernel/x86_init.c | 2
8 files changed, 7 insertions(+), 177 deletions(-)
Index: linux-2.6/arch/x86/include/asm/setup.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/setup.h
+++ linux-2.6/arch/x86/include/asm/setup.h
@@ -43,6 +43,7 @@ static inline void visws_early_detect(vo
extern unsigned long saved_video_mode;
+void trim_bios_range(void);
extern void reserve_standard_io_resources(void);
extern void setup_default_timer_irq(void);
@@ -95,7 +96,6 @@ void *extend_brk(size_t size, size_t ali
#ifdef __i386__
void __init i386_start_kernel(void);
-extern void probe_roms(void);
#else
void __init x86_64_start_kernel(char *real_mode);
Index: linux-2.6/arch/x86/include/asm/x86_init.h
===================================================================
--- linux-2.6.orig/arch/x86/include/asm/x86_init.h
+++ linux-2.6/arch/x86/include/asm/x86_init.h
@@ -32,14 +32,14 @@ struct x86_init_mpparse {
/**
* struct x86_init_resources - platform specific resource related ops
- * @probe_roms: probe BIOS roms
+ * @trim_bios_range: trim BIOS related range in E820
* @reserve_resources: reserve the standard resources for the
* platform
* @memory_setup: platform specific memory setup
*
*/
struct x86_init_resources {
- void (*probe_roms)(void);
+ void (*trim_bios_range)(void);
void (*reserve_resources)(void);
char *(*memory_setup)(void);
};
Index: linux-2.6/arch/x86/kernel/Makefile
===================================================================
--- linux-2.6.orig/arch/x86/kernel/Makefile
+++ linux-2.6/arch/x86/kernel/Makefile
@@ -34,7 +34,6 @@ obj-y += traps.o irq.o irq_$(BITS).o d
obj-y += time.o ioport.o ldt.o dumpstack.o
obj-y += setup.o x86_init.o i8259.o irqinit.o
obj-$(CONFIG_X86_VISWS) += visws_quirks.o
-obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o
obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o
Index: linux-2.6/arch/x86/kernel/head32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/head32.c
+++ linux-2.6/arch/x86/kernel/head32.c
@@ -21,7 +21,6 @@
static void __init i386_default_early_setup(void)
{
/* Initilize 32bit specific setup functions */
- x86_init.resources.probe_roms = probe_roms;
x86_init.mpparse.setup_ioapic_ids = setup_ioapic_ids_from_mpc;
reserve_ebda_region();
Index: linux-2.6/arch/x86/kernel/mrst.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/mrst.c
+++ linux-2.6/arch/x86/kernel/mrst.c
@@ -222,7 +222,7 @@ static void __init mrst_setup_boot_clock
*/
void __init x86_mrst_early_setup(void)
{
- x86_init.resources.probe_roms = x86_init_noop;
+ x86_init.resources.trim_bios_range = x86_init_noop;
x86_init.resources.reserve_resources = x86_init_noop;
x86_init.timers.timer_init = mrst_time_init;
Index: linux-2.6/arch/x86/kernel/probe_roms_32.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/probe_roms_32.c
+++ /dev/null
@@ -1,166 +0,0 @@
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/uaccess.h>
-#include <linux/mmzone.h>
-#include <linux/ioport.h>
-#include <linux/seq_file.h>
-#include <linux/console.h>
-#include <linux/init.h>
-#include <linux/edd.h>
-#include <linux/dmi.h>
-#include <linux/pfn.h>
-#include <linux/pci.h>
-#include <asm/pci-direct.h>
-
-
-#include <asm/e820.h>
-#include <asm/mmzone.h>
-#include <asm/setup.h>
-#include <asm/sections.h>
-#include <asm/io.h>
-#include <asm/setup_arch.h>
-
-static struct resource system_rom_resource = {
- .name = "System ROM",
- .start = 0xf0000,
- .end = 0xfffff,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource extension_rom_resource = {
- .name = "Extension ROM",
- .start = 0xe0000,
- .end = 0xeffff,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-static struct resource adapter_rom_resources[] = { {
- .name = "Adapter ROM",
- .start = 0xc8000,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-}, {
- .name = "Adapter ROM",
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-} };
-
-static struct resource video_rom_resource = {
- .name = "Video ROM",
- .start = 0xc0000,
- .end = 0xc7fff,
- .flags = IORESOURCE_BUSY | IORESOURCE_READONLY | IORESOURCE_MEM
-};
-
-#define ROMSIGNATURE 0xaa55
-
-static int __init romsignature(const unsigned char *rom)
-{
- const unsigned short * const ptr = (const unsigned short *)rom;
- unsigned short sig;
-
- return probe_kernel_address(ptr, sig) == 0 && sig == ROMSIGNATURE;
-}
-
-static int __init romchecksum(const unsigned char *rom, unsigned long length)
-{
- unsigned char sum, c;
-
- for (sum = 0; length && probe_kernel_address(rom++, c) == 0; length--)
- sum += c;
- return !length && !sum;
-}
-
-void __init probe_roms(void)
-{
- const unsigned char *rom;
- unsigned long start, length, upper;
- unsigned char c;
- int i;
-
- /* video rom */
- upper = adapter_rom_resources[0].start;
- for (start = video_rom_resource.start; start < upper; start += 2048) {
- rom = isa_bus_to_virt(start);
- if (!romsignature(rom))
- continue;
-
- video_rom_resource.start = start;
-
- if (probe_kernel_address(rom + 2, c) != 0)
- continue;
-
- /* 0 < length <= 0x7f * 512, historically */
- length = c * 512;
-
- /* if checksum okay, trust length byte */
- if (length && romchecksum(rom, length))
- video_rom_resource.end = start + length - 1;
-
- request_resource(&iomem_resource, &video_rom_resource);
- break;
- }
-
- start = (video_rom_resource.end + 1 + 2047) & ~2047UL;
- if (start < upper)
- start = upper;
-
- /* system rom */
- request_resource(&iomem_resource, &system_rom_resource);
- upper = system_rom_resource.start;
-
- /* check for extension rom (ignore length byte!) */
- rom = isa_bus_to_virt(extension_rom_resource.start);
- if (romsignature(rom)) {
- length = extension_rom_resource.end - extension_rom_resource.start + 1;
- if (romchecksum(rom, length)) {
- request_resource(&iomem_resource, &extension_rom_resource);
- upper = extension_rom_resource.start;
- }
- }
-
- /* check for adapter roms on 2k boundaries */
- for (i = 0; i < ARRAY_SIZE(adapter_rom_resources) && start < upper; start += 2048) {
- rom = isa_bus_to_virt(start);
- if (!romsignature(rom))
- continue;
-
- if (probe_kernel_address(rom + 2, c) != 0)
- continue;
-
- /* 0 < length <= 0x7f * 512, historically */
- length = c * 512;
-
- /* but accept any length that fits if checksum okay */
- if (!length || start + length > upper || !romchecksum(rom, length))
- continue;
-
- adapter_rom_resources[i].start = start;
- adapter_rom_resources[i].end = start + length - 1;
- request_resource(&iomem_resource, &adapter_rom_resources[i]);
-
- start = adapter_rom_resources[i++].end & ~2047UL;
- }
-}
-
Index: linux-2.6/arch/x86/kernel/setup.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/setup.c
+++ linux-2.6/arch/x86/kernel/setup.c
@@ -680,7 +680,7 @@ static struct dmi_system_id __initdata b
{}
};
-static void __init trim_bios_range(void)
+void __init trim_bios_range(void)
{
/*
* A special case is the first 4Kb of memory;
@@ -853,14 +853,12 @@ void __init setup_arch(char **cmdline_p)
*/
init_hypervisor_platform();
- x86_init.resources.probe_roms();
-
/* after parse_early_param, so could debug it */
insert_resource(&iomem_resource, &code_resource);
insert_resource(&iomem_resource, &data_resource);
insert_resource(&iomem_resource, &bss_resource);
- trim_bios_range();
+ x86_init.resources.trim_bios_range();
#ifdef CONFIG_X86_32
if (ppro_with_ram_bug()) {
e820_update_range(0x70000000ULL, 0x40000ULL, E820_RAM,
Index: linux-2.6/arch/x86/kernel/x86_init.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/x86_init.c
+++ linux-2.6/arch/x86/kernel/x86_init.c
@@ -32,7 +32,7 @@ void iommu_shutdown_noop(void) { }
struct x86_init_ops x86_init __initdata = {
.resources = {
- .probe_roms = x86_init_noop,
+ .trim_bios_range = trim_bios_range,
.reserve_resources = reserve_standard_io_resources,
.memory_setup = default_machine_specific_memory_setup,
},
next prev parent reply other threads:[~2010-04-26 22:07 UTC|newest]
Thread overview: 110+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-07 21:06 [PATCH] x86: Reserve legacy VGA MMIO area for x86_64 as well as x86_32 Bjorn Helgaas
2010-04-07 22:45 ` Yinghai
2010-04-07 23:05 ` Bjorn Helgaas
2010-04-07 23:22 ` Yinghai
2010-04-08 3:24 ` Bjorn Helgaas
2010-04-08 4:42 ` H. Peter Anvin
2010-04-08 13:04 ` Bjorn Helgaas
2010-04-09 16:04 ` Bjorn Helgaas
2010-04-09 16:44 ` H. Peter Anvin
2010-04-09 17:22 ` Yinghai
2010-04-09 18:23 ` H. Peter Anvin
2010-04-09 18:55 ` Guenter Roeck
2010-04-09 19:55 ` Yinghai
2010-04-09 22:21 ` Andy Isaacson
2010-04-09 22:27 ` Yinghai Lu
2010-04-09 22:35 ` Andy Isaacson
2010-04-09 22:44 ` H. Peter Anvin
2010-04-09 22:54 ` Yinghai
2010-04-09 23:01 ` Yinghai
2010-04-10 0:00 ` Andy Isaacson
2010-04-10 1:10 ` Yinghai
2010-04-10 1:43 ` Andy Isaacson
2010-04-10 1:48 ` Yinghai
2010-04-10 1:57 ` Andy Isaacson
2010-04-10 2:46 ` Yinghai
2010-04-12 18:54 ` Andy Isaacson
2010-04-12 19:34 ` Yinghai
2010-04-12 19:48 ` Andy Isaacson
2010-04-12 19:55 ` yinghai.lu
2010-04-12 20:02 ` Andy Isaacson
2010-04-12 22:32 ` [PATCH -v2 1/2] x86: Reserve [0xa0000, 0x100000] in e820 map Yinghai
2010-04-13 21:02 ` Bjorn Helgaas
2010-04-13 21:08 ` Yinghai
2010-04-13 21:09 ` H. Peter Anvin
2010-04-13 21:11 ` Yinghai
2010-04-13 21:18 ` H. Peter Anvin
2010-04-13 21:22 ` [PATCH -v3 1/3] " Yinghai
2010-04-23 23:30 ` H. Peter Anvin
2010-04-26 15:35 ` Jesse Barnes
2010-04-13 21:23 ` [PATCH -v3 2/3] x86,pci, acpi: host bridge windows inherit BUSY flag from parent Yinghai
2010-04-13 21:24 ` [PATCH -v3 3/3] pci: don't allocate from a BUSY bus resource Yinghai
2010-04-13 21:42 ` [PATCH -v2 1/2] x86: Reserve [0xa0000, 0x100000] in e820 map Yinghai
2010-04-13 21:58 ` H. Peter Anvin
2010-04-13 22:29 ` Yinghai
2010-04-13 22:39 ` Yinghai
2010-04-13 22:41 ` H. Peter Anvin
2010-04-13 22:58 ` Yinghai
2010-04-13 23:02 ` H. Peter Anvin
2010-04-13 23:03 ` Yinghai
2010-04-13 23:07 ` H. Peter Anvin
2010-04-13 23:09 ` Yinghai
2010-04-21 5:33 ` [PATCH -v4 1/3] " Yinghai
2010-04-21 5:34 ` [PATCH 2/3] x86, resource: Add reserve_region_with_split_check_child() Yinghai
2010-04-21 5:35 ` [PATCH 3/3] x86,pci,acpi: Handle invalid _CRS Yinghai
2010-04-21 15:21 ` Bjorn Helgaas
2010-04-21 16:45 ` Yinghai Lu
2010-04-21 16:59 ` Bjorn Helgaas
2010-04-21 22:33 ` H. Peter Anvin
2010-04-21 23:04 ` Bjorn Helgaas
2010-04-21 23:10 ` H. Peter Anvin
2010-04-21 23:43 ` Yinghai
2010-04-22 0:02 ` H. Peter Anvin
2010-04-22 0:06 ` Yinghai
2010-04-21 19:31 ` [PATCH -v4 1/3] x86: Reserve [0xa0000, 0x100000] in e820 map Andy Isaacson
2010-04-23 23:05 ` [PATCH] x86/PCI: never allocate PCI MMIO resources below BIOS_END Bjorn Helgaas
2010-04-23 23:44 ` H. Peter Anvin
2010-04-24 0:36 ` Yinghai Lu
2010-04-26 12:50 ` R. Andrew Bailey
2010-04-26 15:40 ` Bjorn Helgaas
2010-04-26 18:34 ` Andy Isaacson
2010-04-26 19:31 ` Jesse Barnes
2010-04-26 20:27 ` Bjorn Helgaas
2010-04-26 20:37 ` Jesse Barnes
2010-04-26 21:07 ` Yinghai
2010-04-26 21:19 ` H. Peter Anvin
2010-04-26 21:12 ` H. Peter Anvin
2010-04-26 21:25 ` Jesse Barnes
2010-04-26 21:44 ` H. Peter Anvin
2010-04-26 21:53 ` Jesse Barnes
2010-04-26 21:59 ` Yinghai Lu
2010-04-26 22:04 ` [PATCH -v5] reserve a0000 - 0x10000 Yinghai
[not found] ` <4BD60CD4.9020708@oracle.com>
2010-04-26 22:04 ` [PATCH -v5 1/3] x86: Reserve [0xa0000, 0x100000] in e820 map Yinghai
2010-04-26 22:04 ` Yinghai [this message]
2010-04-26 22:04 ` [PATCH -v5 3/3] x86, resource: Add reserve_region_with_split_check_child() Yinghai
2010-04-26 21:44 ` [PATCH] x86/PCI: never allocate PCI MMIO resources below BIOS_END jacob pan
2010-04-13 23:03 ` [PATCH -v2 1/2] x86: Reserve [0xa0000, 0x100000] in e820 map H. Peter Anvin
2010-04-14 0:57 ` Yinghai
2010-04-14 16:55 ` Bjorn Helgaas
2010-04-14 17:21 ` Yinghai Lu
2010-04-14 19:25 ` Andy Isaacson
2010-04-14 19:27 ` Yinghai
2010-04-14 19:43 ` Andy Isaacson
2010-04-14 19:49 ` Yinghai
2010-04-12 22:33 ` [PATCH -v2 2/2] x86,pci, acpi: Inherent BUSY flag when setup_resource for root bus Yinghai
2010-04-12 22:44 ` Jesse Barnes
2010-04-13 21:02 ` Bjorn Helgaas
2010-04-09 20:11 ` [PATCH] x86: Reserve legacy VGA MMIO area for x86_64 as well as x86_32 H. Peter Anvin
2010-04-09 20:31 ` Guenter Roeck
2010-04-09 20:44 ` H. Peter Anvin
2010-04-09 21:01 ` Guenter Roeck
2010-04-09 22:42 ` Alan Cox
2010-04-09 22:42 ` H. Peter Anvin
2010-04-09 22:54 ` Alan Cox
2010-04-09 22:55 ` H. Peter Anvin
2010-04-09 22:51 ` Alan Cox
2010-04-09 22:55 ` H. Peter Anvin
2010-04-07 23:43 ` H. Peter Anvin
2010-04-08 0:19 ` Andy Isaacson
2010-04-08 5:00 ` H. Peter Anvin
2010-04-08 21:40 ` Andy Isaacson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4BD60E02.6090708@oracle.com \
--to=yinghai.lu@oracle.com \
--cc=adi@hexapodia.org \
--cc=bailey@akamai.com \
--cc=bjorn.helgaas@hp.com \
--cc=guenter.roeck@ericsson.com \
--cc=hpa@zytor.com \
--cc=jbarnes@virtuousgeek.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=torvalds@linux-foundation.org \
--cc=trenn@suse.de \
--cc=x86@kernel.org \
--cc=yaneti@declera.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox