Re: [v5 Patch 1/3] netpoll: add generic support for bridge and bonding devices

[Cong Wang <amwang@redhat.com>]

[-- Attachment #1: Type: text/plain, Size: 805 bytes --]

On 05/28/10 02:05, Flavio Leitner wrote:
>
> Hi guys!
>
> I finally could test this to see if an old problem reported on bugzilla[1] was
> fixed now, but unfortunately it is still there.
>
> The ticket is private I guess, but basically the problem happens when bonding
> driver tries to print something after it had taken the write_lock (monitor
> functions, enslave/de-enslave), so the printk() will pass through netpoll, then
> on bonding again which no matter what mode you use, it will try to read_lock()
> the lock again. The result is a deadlock and the entire system hangs.
>

Does the attached patch fix this hang?

Thanks!

----------------------->

We should notify netconsole that bond is changing its slaves
when we use active-backup mode.

Signed-off-by: WANG Cong <amwang@redhat.com>

----


[-- Attachment #2: drivers-net-bonding-fix-activebackup-deadlock.diff --]
[-- Type: text/x-patch, Size: 898 bytes --]

diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 5e12462..9494c02 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1199,6 +1199,7 @@ void bond_select_active_slave(struct bonding *bond)
 
 	best_slave = bond_find_best_slave(bond);
 	if (best_slave != bond->curr_active_slave) {
+		netdev_bonding_change(bond->dev, NETDEV_BONDING_DESLAVE);
 		bond_change_active_slave(bond, best_slave);
 		rv = bond_set_carrier(bond);
 		if (!rv)
@@ -2154,6 +2155,7 @@ static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_devi
 	    (old_active) &&
 	    (new_active->link == BOND_LINK_UP) &&
 	    IS_UP(new_active->dev)) {
+		netdev_bonding_change(bond->dev, NETDEV_BONDING_DESLAVE);
 		write_lock_bh(&bond->curr_slave_lock);
 		bond_change_active_slave(bond, new_active);
 		write_unlock_bh(&bond->curr_slave_lock);