* Drivers for USB,SATA and eMMC
@ 2010-05-28 11:46 Jack
2010-05-29 0:04 ` Robert Hancock
0 siblings, 1 reply; 2+ messages in thread
From: Jack @ 2010-05-28 11:46 UTC (permalink / raw)
To: linux-kernel; +Cc: mylinux.list
I have a new IOH which is connected to an x86 core through PCIe. This
IOH has SATA, USB and eMMC attached to it.. Do I need to write a
controller driver (referring the IOH data sheet) for these interfaces,
or does Linux provides any std. drivers for these interfaces. I am new
to x86 stuffs.
Could anyone guide me on this.?
-Jack
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Drivers for USB,SATA and eMMC
2010-05-28 11:46 Drivers for USB,SATA and eMMC Jack
@ 2010-05-29 0:04 ` Robert Hancock
0 siblings, 0 replies; 2+ messages in thread
From: Robert Hancock @ 2010-05-29 0:04 UTC (permalink / raw)
To: Jack; +Cc: linux-kernel
On 05/28/2010 05:46 AM, Jack wrote:
> I have a new IOH which is connected to an x86 core through PCIe. This
> IOH has SATA, USB and eMMC attached to it.. Do I need to write a
> controller driver (referring the IOH data sheet) for these interfaces,
> or does Linux provides any std. drivers for these interfaces. I am new
> to x86 stuffs.
> Could anyone guide me on this.?
It depends what interface protocol those devices use..
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-05-29 0:04 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-05-28 11:46 Drivers for USB,SATA and eMMC Jack
2010-05-29 0:04 ` Robert Hancock
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox