From: Robert Hancock <hancockrwd@gmail.com>
To: amruth pattanada <amruth.vamadev@gmail.com>
Cc: linux-ide@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: Re: Setting up Silicon image 3114 in DMA mode
Date: Fri, 25 Jun 2010 22:13:27 -0600 [thread overview]
Message-ID: <4C257E67.9090101@gmail.com> (raw)
In-Reply-To: <AANLkTinYuxwsLQKGRd6joRSCcbnns930DDienlhfEB8i@mail.gmail.com>
On 06/25/2010 02:25 AM, amruth pattanada wrote:
> Hi
> Can anybody please guide me what minimal steps to follow for setting
> up 3114 for operating in DMA mode and looked into linux 2.6.32.7 code.
> I am porting 3114 driver to RTOS but have problems in using BAR5 PCI
> config space because of Memory mapped region issues. I can access BAR4
> and plan to set up DMA mode.
> How do we access entire BAR5 memory space without using BAR5, is there
> any indirect way to access BAR5 using BAR4. Please let me know.
> Thanks
> Amruth p.v
> Sr.Embedded Engineer
See the datasheet (PCI Configuration Space section), there's a way to
access BAR5 registers using indirect access registers in configuration
space. I expect this will be relatively slow, however.
next prev parent reply other threads:[~2010-06-26 4:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-25 8:25 Setting up Silicon image 3114 in DMA mode amruth pattanada
2010-06-26 4:13 ` Robert Hancock [this message]
2010-06-26 15:06 ` amruth pattanada
2010-06-30 12:30 ` amruth pattanada
2010-07-01 0:33 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4C257E67.9090101@gmail.com \
--to=hancockrwd@gmail.com \
--cc=amruth.vamadev@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox