* [PATCH 1/1] Added Technisat Skystar USB HD CI
@ 2010-06-28 9:57 Renzo Dani
2010-07-05 22:12 ` Mauro Carvalho Chehab
0 siblings, 1 reply; 2+ messages in thread
From: Renzo Dani @ 2010-06-28 9:57 UTC (permalink / raw)
To: adams.xu
Cc: arons7, mchehab, rdunlap, o.endriss, awalls, crope, manu,
linux-media, linux-kernel, linux-doc
From: Renzo Dani <arons7@gmail.com>
Signed-off-by: Renzo Dani <arons7@gmail.com>
---
Documentation/dvb/get_dvb_firmware | 19 ++++++++++++++++++-
drivers/media/dvb/dvb-usb/az6027.c | 14 ++++++++++++--
2 files changed, 30 insertions(+), 3 deletions(-)
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 239cbdb..c203e94 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -26,7 +26,7 @@ use IO::Handle;
"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
"or51211", "or51132_qam", "or51132_vsb", "bluebird",
"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
- "af9015", "ngene");
+ "af9015", "ngene", "az6027");
# Check args
syntax() if (scalar(@ARGV) != 1);
@@ -567,6 +567,23 @@ sub ngene {
"$file1, $file2";
}
+sub az6027{
+ my $file = "AZ6027_Linux_Driver.tar.gz";
+ my $url = "http://linux.terratec.de/files/$file";
+ my $firmware = "dvb-usb-az6027-03.fw";
+
+ wgetfile($file, $url);
+
+ #untar
+ if( system("tar xzvf $file")){
+ die "failed to untar firmware";
+ }
+ if( system("rm -rf AZ6027_Linux_Driver; rm $file")){
+ die ("unable to remove unnecessary files");
+ }
+
+ $firmware;
+}
# ---------------------------------------------------------------
# Utilities
diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
index d7290b2..891ae04 100644
--- a/drivers/media/dvb/dvb-usb/az6027.c
+++ b/drivers/media/dvb/dvb-usb/az6027.c
@@ -1103,13 +1103,23 @@ static struct dvb_usb_device_properties az6027_properties = {
.rc_query = az6027_rc_query,
.i2c_algo = &az6027_i2c_algo,
- .num_device_descs = 1,
+ .num_device_descs = 2,
.devices = {
{
.name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
.cold_ids = { &az6027_usb_table[0], NULL },
.warm_ids = { NULL },
},
+ {
+ .name = " Terratec DVB 2 CI",
+ .cold_ids = { &az6027_usb_table[1], NULL },
+ .warm_ids = { NULL },
+ },
+ {
+ .name = "TechniSat SkyStar USB 2 HD CI (AZ6027)",
+ .cold_ids = { &az6027_usb_table[2], NULL },
+ .warm_ids = { NULL },
+ },
{ NULL },
}
};
@@ -1118,7 +1128,7 @@ static struct dvb_usb_device_properties az6027_properties = {
static struct usb_driver az6027_usb_driver = {
.name = "dvb_usb_az6027",
.probe = az6027_usb_probe,
- .disconnect = az6027_usb_disconnect,
+ .disconnect = az6027_usb_disconnect,
.id_table = az6027_usb_table,
};
--
1.7.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH 1/1] Added Technisat Skystar USB HD CI
2010-06-28 9:57 [PATCH 1/1] Added Technisat Skystar USB HD CI Renzo Dani
@ 2010-07-05 22:12 ` Mauro Carvalho Chehab
0 siblings, 0 replies; 2+ messages in thread
From: Mauro Carvalho Chehab @ 2010-07-05 22:12 UTC (permalink / raw)
To: Renzo Dani
Cc: adams.xu, rdunlap, o.endriss, awalls, crope, manu, linux-media,
linux-kernel, linux-doc
Em 28-06-2010 06:57, Renzo Dani escreveu:
> From: Renzo Dani <arons7@gmail.com>
>
>
> Signed-off-by: Renzo Dani <arons7@gmail.com>
> ---
> Documentation/dvb/get_dvb_firmware | 19 ++++++++++++++++++-
> drivers/media/dvb/dvb-usb/az6027.c | 14 ++++++++++++--
Please, re-base your patch against upstream and send the firmware patch on a separate
email.
Cheers,
Mauro
> 2 files changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
> index 239cbdb..c203e94 100644
> --- a/Documentation/dvb/get_dvb_firmware
> +++ b/Documentation/dvb/get_dvb_firmware
> @@ -26,7 +26,7 @@ use IO::Handle;
> "dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
> "or51211", "or51132_qam", "or51132_vsb", "bluebird",
> "opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718",
> - "af9015", "ngene");
> + "af9015", "ngene", "az6027");
>
> # Check args
> syntax() if (scalar(@ARGV) != 1);
> @@ -567,6 +567,23 @@ sub ngene {
> "$file1, $file2";
> }
>
> +sub az6027{
> + my $file = "AZ6027_Linux_Driver.tar.gz";
> + my $url = "http://linux.terratec.de/files/$file";
> + my $firmware = "dvb-usb-az6027-03.fw";
> +
> + wgetfile($file, $url);
> +
> + #untar
> + if( system("tar xzvf $file")){
> + die "failed to untar firmware";
> + }
> + if( system("rm -rf AZ6027_Linux_Driver; rm $file")){
> + die ("unable to remove unnecessary files");
> + }
> +
> + $firmware;
> +}
> # ---------------------------------------------------------------
> # Utilities
>
> diff --git a/drivers/media/dvb/dvb-usb/az6027.c b/drivers/media/dvb/dvb-usb/az6027.c
> index d7290b2..891ae04 100644
> --- a/drivers/media/dvb/dvb-usb/az6027.c
> +++ b/drivers/media/dvb/dvb-usb/az6027.c
> @@ -1103,13 +1103,23 @@ static struct dvb_usb_device_properties az6027_properties = {
> .rc_query = az6027_rc_query,
> .i2c_algo = &az6027_i2c_algo,
>
> - .num_device_descs = 1,
> + .num_device_descs = 2,
> .devices = {
> {
> .name = "AZUREWAVE DVB-S/S2 USB2.0 (AZ6027)",
> .cold_ids = { &az6027_usb_table[0], NULL },
> .warm_ids = { NULL },
> },
> + {
> + .name = " Terratec DVB 2 CI",
> + .cold_ids = { &az6027_usb_table[1], NULL },
> + .warm_ids = { NULL },
> + },
> + {
> + .name = "TechniSat SkyStar USB 2 HD CI (AZ6027)",
> + .cold_ids = { &az6027_usb_table[2], NULL },
> + .warm_ids = { NULL },
> + },
> { NULL },
> }
> };
> @@ -1118,7 +1128,7 @@ static struct dvb_usb_device_properties az6027_properties = {
> static struct usb_driver az6027_usb_driver = {
> .name = "dvb_usb_az6027",
> .probe = az6027_usb_probe,
> - .disconnect = az6027_usb_disconnect,
> + .disconnect = az6027_usb_disconnect,
> .id_table = az6027_usb_table,
> };
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2010-07-05 22:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-06-28 9:57 [PATCH 1/1] Added Technisat Skystar USB HD CI Renzo Dani
2010-07-05 22:12 ` Mauro Carvalho Chehab
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox